This is /rogcc/3.3/riscos-dist/!gcc/docs/g77, produced by makeinfo
version 4.2 from g77.texi.

INFO-DIR-SECTION Programming
START-INFO-DIR-ENTRY
* g77: (g77).                  The GNU Fortran compiler.
END-INFO-DIR-ENTRY
   This file documents the use of the GNU Fortran (`g77') compiler.  It
corresponds to the GCC-2.95 version of `g77'.

   Published by the Free Software Foundation 59 Temple Place - Suite 330
Boston, MA 02111-1307 USA

   Copyright (C) 1995-1999 Free Software Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

   Permission is granted to copy and distribute modified versions of
this manual under the conditions for verbatim copying, provided also
that the sections entitled "GNU General Public License," "Funding for
Free Software," and "Protect Your Freedom--Fight `Look And Feel'" are
included exactly as in the original, and provided that the entire
resulting derived work is distributed under the terms of a permission
notice identical to this one.

   Permission is granted to copy and distribute translations of this
manual into another language, under the above conditions for modified
versions, except that the sections entitled "GNU General Public
License," "Funding for Free Software," and "Protect Your Freedom--Fight
`Look And Feel'", and this permission notice, may be included in
translations approved by the Free Software Foundation instead of in the
original English.

   Contributed by James Craig Burley (<craig@jcb-sc.com>).  Inspired by
a first pass at translating `g77-0.5.16/f/DOC' that was contributed to
Craig by David Ronis (<ronis@onsager.chem.mcgill.ca>).


File: g77,  Node: Top,  Next: Copying,  Up: (DIR)

Introduction
************

   This manual documents how to run and install `g77', as well as its
new features and incompatibilities, and how to report bugs.  It
corresponds to the GCC-2.95 version of `g77'.

* Menu:

* Copying::         GNU General Public License says
                    how you can copy and share GNU Fortran.
* Contributors::    People who have contributed to GNU Fortran.
* Funding::         How to help assure continued work for free software.
* Funding GNU Fortran::  How to help assure continued work on GNU Fortran.
* Look and Feel::   Protect your freedom---fight ``look and feel''.

* Getting Started:: Finding your way around this manual.
* What is GNU Fortran?::  How `g77' fits into the universe.
* G77 and GCC::     You can compile Fortran, C, or other programs.
* Invoking G77::    Command options supported by `g77'.
* News::            News about recent releases of `g77'.
* Changes::         User-visible changes to recent releases of `g77'.
* Language::        The GNU Fortran language.
* Compiler::        The GNU Fortran compiler.
* Other Dialects::  Dialects of Fortran supported by `g77'.
* Other Compilers:: Fortran compilers other than `g77'.
* Other Languages:: Languages other than Fortran.
* Installation::    How to configure, compile and install GNU Fortran.
* Debugging and Interfacing::  How `g77' generates code.
* Collected Fortran Wisdom::  How to avoid Trouble.
* Trouble::         If you have trouble with GNU Fortran.
* Open Questions::  Things we'd like to know.
* Bugs::            How, why, and where to report bugs.
* Service::         How to find suppliers of support for GNU Fortran.

* M: Diagnostics.   Diagnostics produced by `g77'.

* Index::           Index of concepts and symbol names.


File: g77,  Node: Copying,  Next: Contributors,  Prev: Top,  Up: Top

GNU GENERAL PUBLIC LICENSE
**************************

                         Version 2, June 1991
     Copyright (C) 1989, 1991 Free Software Foundation, Inc.
     59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
     
     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

Preamble
========

   The licenses for most software are designed to take away your
freedom to share and change it.  By contrast, the GNU General Public
License is intended to guarantee your freedom to share and change free
software--to make sure the software is free for all its users.  This
General Public License applies to most of the Free Software
Foundation's software and to any other program whose authors commit to
using it.  (Some other Free Software Foundation software is covered by
the GNU Library General Public License instead.)  You can apply it to
your programs, too.

   When we speak of free software, we are referring to freedom, not
price.  Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
this service if you wish), that you receive source code or can get it
if you want it, that you can change the software or use pieces of it in
new free programs; and that you know you can do these things.

   To protect your rights, we need to make restrictions that forbid
anyone to deny you these rights or to ask you to surrender the rights.
These restrictions translate to certain responsibilities for you if you
distribute copies of the software, or if you modify it.

   For example, if you distribute copies of such a program, whether
gratis or for a fee, you must give the recipients all the rights that
you have.  You must make sure that they, too, receive or can get the
source code.  And you must show them these terms so they know their
rights.

   We protect your rights with two steps: (1) copyright the software,
and (2) offer you this license which gives you legal permission to copy,
distribute and/or modify the software.

   Also, for each author's protection and ours, we want to make certain
that everyone understands that there is no warranty for this free
software.  If the software is modified by someone else and passed on, we
want its recipients to know that what they have is not the original, so
that any problems introduced by others will not reflect on the original
authors' reputations.

   Finally, any free program is threatened constantly by software
patents.  We wish to avoid the danger that redistributors of a free
program will individually obtain patent licenses, in effect making the
program proprietary.  To prevent this, we have made it clear that any
patent must be licensed for everyone's free use or not licensed at all.

   The precise terms and conditions for copying, distribution and
modification follow.

    TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
  0. This License applies to any program or other work which contains a
     notice placed by the copyright holder saying it may be distributed
     under the terms of this General Public License.  The "Program",
     below, refers to any such program or work, and a "work based on
     the Program" means either the Program or any derivative work under
     copyright law: that is to say, a work containing the Program or a
     portion of it, either verbatim or with modifications and/or
     translated into another language.  (Hereinafter, translation is
     included without limitation in the term "modification".)  Each
     licensee is addressed as "you".

     Activities other than copying, distribution and modification are
     not covered by this License; they are outside its scope.  The act
     of running the Program is not restricted, and the output from the
     Program is covered only if its contents constitute a work based on
     the Program (independent of having been made by running the
     Program).  Whether that is true depends on what the Program does.

  1. You may copy and distribute verbatim copies of the Program's
     source code as you receive it, in any medium, provided that you
     conspicuously and appropriately publish on each copy an appropriate
     copyright notice and disclaimer of warranty; keep intact all the
     notices that refer to this License and to the absence of any
     warranty; and give any other recipients of the Program a copy of
     this License along with the Program.

     You may charge a fee for the physical act of transferring a copy,
     and you may at your option offer warranty protection in exchange
     for a fee.

  2. You may modify your copy or copies of the Program or any portion
     of it, thus forming a work based on the Program, and copy and
     distribute such modifications or work under the terms of Section 1
     above, provided that you also meet all of these conditions:

       a. You must cause the modified files to carry prominent notices
          stating that you changed the files and the date of any change.

       b. You must cause any work that you distribute or publish, that
          in whole or in part contains or is derived from the Program
          or any part thereof, to be licensed as a whole at no charge
          to all third parties under the terms of this License.

       c. If the modified program normally reads commands interactively
          when run, you must cause it, when started running for such
          interactive use in the most ordinary way, to print or display
          an announcement including an appropriate copyright notice and
          a notice that there is no warranty (or else, saying that you
          provide a warranty) and that users may redistribute the
          program under these conditions, and telling the user how to
          view a copy of this License.  (Exception: if the Program
          itself is interactive but does not normally print such an
          announcement, your work based on the Program is not required
          to print an announcement.)

     These requirements apply to the modified work as a whole.  If
     identifiable sections of that work are not derived from the
     Program, and can be reasonably considered independent and separate
     works in themselves, then this License, and its terms, do not
     apply to those sections when you distribute them as separate
     works.  But when you distribute the same sections as part of a
     whole which is a work based on the Program, the distribution of
     the whole must be on the terms of this License, whose permissions
     for other licensees extend to the entire whole, and thus to each
     and every part regardless of who wrote it.

     Thus, it is not the intent of this section to claim rights or
     contest your rights to work written entirely by you; rather, the
     intent is to exercise the right to control the distribution of
     derivative or collective works based on the Program.

     In addition, mere aggregation of another work not based on the
     Program with the Program (or with a work based on the Program) on
     a volume of a storage or distribution medium does not bring the
     other work under the scope of this License.

  3. You may copy and distribute the Program (or a work based on it,
     under Section 2) in object code or executable form under the terms
     of Sections 1 and 2 above provided that you also do one of the
     following:

       a. Accompany it with the complete corresponding machine-readable
          source code, which must be distributed under the terms of
          Sections 1 and 2 above on a medium customarily used for
          software interchange; or,

       b. Accompany it with a written offer, valid for at least three
          years, to give any third party, for a charge no more than your
          cost of physically performing source distribution, a complete
          machine-readable copy of the corresponding source code, to be
          distributed under the terms of Sections 1 and 2 above on a
          medium customarily used for software interchange; or,

       c. Accompany it with the information you received as to the offer
          to distribute corresponding source code.  (This alternative is
          allowed only for noncommercial distribution and only if you
          received the program in object code or executable form with
          such an offer, in accord with Subsection b above.)

     The source code for a work means the preferred form of the work for
     making modifications to it.  For an executable work, complete
     source code means all the source code for all modules it contains,
     plus any associated interface definition files, plus the scripts
     used to control compilation and installation of the executable.
     However, as a special exception, the source code distributed need
     not include anything that is normally distributed (in either
     source or binary form) with the major components (compiler,
     kernel, and so on) of the operating system on which the executable
     runs, unless that component itself accompanies the executable.

     If distribution of executable or object code is made by offering
     access to copy from a designated place, then offering equivalent
     access to copy the source code from the same place counts as
     distribution of the source code, even though third parties are not
     compelled to copy the source along with the object code.

  4. You may not copy, modify, sublicense, or distribute the Program
     except as expressly provided under this License.  Any attempt
     otherwise to copy, modify, sublicense or distribute the Program is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

  5. You are not required to accept this License, since you have not
     signed it.  However, nothing else grants you permission to modify
     or distribute the Program or its derivative works.  These actions
     are prohibited by law if you do not accept this License.
     Therefore, by modifying or distributing the Program (or any work
     based on the Program), you indicate your acceptance of this
     License to do so, and all its terms and conditions for copying,
     distributing or modifying the Program or works based on it.

  6. Each time you redistribute the Program (or any work based on the
     Program), the recipient automatically receives a license from the
     original licensor to copy, distribute or modify the Program
     subject to these terms and conditions.  You may not impose any
     further restrictions on the recipients' exercise of the rights
     granted herein.  You are not responsible for enforcing compliance
     by third parties to this License.

  7. If, as a consequence of a court judgment or allegation of patent
     infringement or for any other reason (not limited to patent
     issues), conditions are imposed on you (whether by court order,
     agreement or otherwise) that contradict the conditions of this
     License, they do not excuse you from the conditions of this
     License.  If you cannot distribute so as to satisfy simultaneously
     your obligations under this License and any other pertinent
     obligations, then as a consequence you may not distribute the
     Program at all.  For example, if a patent license would not permit
     royalty-free redistribution of the Program by all those who
     receive copies directly or indirectly through you, then the only
     way you could satisfy both it and this License would be to refrain
     entirely from distribution of the Program.

     If any portion of this section is held invalid or unenforceable
     under any particular circumstance, the balance of the section is
     intended to apply and the section as a whole is intended to apply
     in other circumstances.

     It is not the purpose of this section to induce you to infringe any
     patents or other property right claims or to contest validity of
     any such claims; this section has the sole purpose of protecting
     the integrity of the free software distribution system, which is
     implemented by public license practices.  Many people have made
     generous contributions to the wide range of software distributed
     through that system in reliance on consistent application of that
     system; it is up to the author/donor to decide if he or she is
     willing to distribute software through any other system and a
     licensee cannot impose that choice.

     This section is intended to make thoroughly clear what is believed
     to be a consequence of the rest of this License.

  8. If the distribution and/or use of the Program is restricted in
     certain countries either by patents or by copyrighted interfaces,
     the original copyright holder who places the Program under this
     License may add an explicit geographical distribution limitation
     excluding those countries, so that distribution is permitted only
     in or among countries not thus excluded.  In such case, this
     License incorporates the limitation as if written in the body of
     this License.

  9. The Free Software Foundation may publish revised and/or new
     versions of the General Public License from time to time.  Such
     new versions will be similar in spirit to the present version, but
     may differ in detail to address new problems or concerns.

     Each version is given a distinguishing version number.  If the
     Program specifies a version number of this License which applies
     to it and "any later version", you have the option of following
     the terms and conditions either of that version or of any later
     version published by the Free Software Foundation.  If the Program
     does not specify a version number of this License, you may choose
     any version ever published by the Free Software Foundation.

 10. If you wish to incorporate parts of the Program into other free
     programs whose distribution conditions are different, write to the
     author to ask for permission.  For software which is copyrighted
     by the Free Software Foundation, write to the Free Software
     Foundation; we sometimes make exceptions for this.  Our decision
     will be guided by the two goals of preserving the free status of
     all derivatives of our free software and of promoting the sharing
     and reuse of software generally.

                                NO WARRANTY

 11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO
     WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE
     LAW.  EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
     HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT
     WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT
     NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
     FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS TO THE
     QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
     PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY
     SERVICING, REPAIR OR CORRECTION.

 12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN
     WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY
     MODIFY AND/OR REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE
     LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL,
     INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR
     INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
     DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU
     OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY
     OTHER PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN
     ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

                      END OF TERMS AND CONDITIONS

How to Apply These Terms to Your New Programs
=============================================

   If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these
terms.

   To do so, attach the following notices to the program.  It is safest
to attach them to the start of each source file to most effectively
convey the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.

     ONE LINE TO GIVE THE PROGRAM'S NAME AND A BRIEF IDEA OF WHAT IT DOES.
     Copyright (C) 19YY  NAME OF AUTHOR
     
     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.
     
     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.
     
     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.

   Also add information on how to contact you by electronic and paper
mail.

   If the program is interactive, make it output a short notice like
this when it starts in an interactive mode:

     Gnomovision version 69, Copyright (C) 19YY NAME OF AUTHOR
     Gnomovision comes with ABSOLUTELY NO WARRANTY; for details
     type `show w'.
     This is free software, and you are welcome to redistribute it
     under certain conditions; type `show c' for details.

   The hypothetical commands `show w' and `show c' should show the
appropriate parts of the General Public License.  Of course, the
commands you use may be called something other than `show w' and `show
c'; they could even be mouse-clicks or menu items--whatever suits your
program.

   You should also get your employer (if you work as a programmer) or
your school, if any, to sign a "copyright disclaimer" for the program,
if necessary.  Here is a sample; alter the names:

     Yoyodyne, Inc., hereby disclaims all copyright interest in the program
     `Gnomovision' (which makes passes at compilers) written by James Hacker.
     
     SIGNATURE OF TY COON, 1 April 1989
     Ty Coon, President of Vice

   This General Public License does not permit incorporating your
program into proprietary programs.  If your program is a subroutine
library, you may consider it more useful to permit linking proprietary
applications with the library.  If this is what you want to do, use the
GNU Library General Public License instead of this License.


File: g77,  Node: Contributors,  Next: Funding,  Prev: Copying,  Up: Top

Contributors to GNU Fortran
***************************

   In addition to James Craig Burley, who wrote the front end, many
people have helped create and improve GNU Fortran.

   * The packaging and compiler portions of GNU Fortran are based
     largely on the GNU CC compiler.  *Note Contributors to GNU CC:
     (gcc)Contributors, for more information.

   * The run-time library used by GNU Fortran is a repackaged version
     of the `libf2c' library (combined from the `libF77' and `libI77'
     libraries) provided as part of `f2c', available for free from
     `netlib' sites on the Internet.

   * Cygnus Support and The Free Software Foundation contributed
     significant money and/or equipment to Craig's efforts.

   * The following individuals served as alpha testers prior to `g77''s
     public release.  This work consisted of testing, researching,
     sometimes debugging, and occasionally providing small amounts of
     code and fixes for `g77', plus offering plenty of helpful advice
     to Craig:

          Jonathan Corbet

          Dr. Mark Fernyhough

          Takafumi Hayashi (The University of
          Aizu)--<takafumi@u-aizu.ac.jp>

          Kate Hedstrom

          Michel Kern (INRIA and Rice
          University)--<Michel.Kern@inria.fr>

          Dr. A. O. V. Le Blanc

          Dave Love

          Rick Lutowski

          Toon Moene

          Rick Niles

          Derk Reefman

          Wayne K. Schroll

          Bill Thorson

          Pedro A. M. Vazquez

          Ian Watson

   * Scott Snyder (<snyder@d0sgif.fnal.gov>) provided the patch to add
     rudimentary support for `INTEGER*1', `INTEGER*2', and `LOGICAL*1'.
     This inspired Craig to add further support, even though the
     resulting support would still be incomplete, because version 0.6
     is still a ways off.

   * David Ronis (<ronis@onsager.chem.mcgill.ca>) inspired and
     encouraged Craig to rewrite the documentation in texinfo format by
     contributing a first pass at a translation of the old
     `g77-0.5.16/f/DOC' file.

   * Toon Moene (<toon@moene.indiv.nluug.nl>) performed some analysis
     of generated code as part of an overall project to improve `g77'
     code generation to at least be as good as `f2c' used in
     conjunction with `gcc'.  So far, this has resulted in the three,
     somewhat experimental, options added by `g77' to the `gcc'
     compiler and its back end.

     (These, in turn, have made their way into the `egcs' version of
     the compiler, and do not exist in `gcc' version 2.8 or versions of
     `g77' based on that version of `gcc'.)

   * John Carr (<jfc@mit.edu>) wrote the alias analysis improvements.

   * Thanks to Mary Cortani and the staff at Craftwork Solutions
     (<support@craftwork.com>) for all of their support.

   * Many other individuals have helped debug, test, and improve `g77'
     over the past several years, and undoubtedly more people will be
     doing so in the future.  If you have done so, and would like to
     see your name listed in the above list, please ask!  The default
     is that people wish to remain anonymous.


File: g77,  Node: Funding,  Next: Funding GNU Fortran,  Prev: Contributors,  Up: Top

1 Funding Free Software
***********************

   If you want to have more free software a few years from now, it makes
sense for you to help encourage people to contribute funds for its
development.  The most effective approach known is to encourage
commercial redistributors to donate.

   Users of free software systems can boost the pace of development by
encouraging for-a-fee distributors to donate part of their selling price
to free software developers--the Free Software Foundation, and others.

   The way to convince distributors to do this is to demand it and
expect it from them.  So when you compare distributors, judge them
partly by how much they give to free software development.  Show
distributors they must compete to be the one who gives the most.

   To make this approach work, you must insist on numbers that you can
compare, such as, "We will donate ten dollars to the Frobnitz project
for each disk sold."  Don't be satisfied with a vague promise, such as
"A portion of the profits are donated," since it doesn't give a basis
for comparison.

   Even a precise fraction "of the profits from this disk" is not very
meaningful, since creative accounting and unrelated business decisions
can greatly alter what fraction of the sales price counts as profit.
If the price you pay is $50, ten percent of the profit is probably less
than a dollar; it might be a few cents, or nothing at all.

   Some redistributors do development work themselves.  This is useful
too; but to keep everyone honest, you need to inquire how much they do,
and what kind.  Some kinds of development make much more long-term
difference than others.  For example, maintaining a separate version of
a program contributes very little; maintaining the standard version of a
program for the whole community contributes much.  Easy new ports
contribute little, since someone else would surely do them; difficult
ports such as adding a new CPU to the GNU C compiler contribute more;
major new features or packages contribute the most.

   By establishing the idea that supporting further development is "the
proper thing to do" when distributing free software for a fee, we can
assure a steady flow of resources into making more free software.

     Copyright (C) 1994 Free Software Foundation, Inc.
     Verbatim copying and redistribution of this section is permitted
     without royalty; alteration is not permitted.


File: g77,  Node: Funding GNU Fortran,  Next: Look and Feel,  Prev: Funding,  Up: Top

2 Funding GNU Fortran
*********************

   Work on GNU Fortran is still being done mostly by its author, James
Craig Burley (<craig@jcb-sc.com>), who is a volunteer for, not an
employee of, the Free Software Foundation (FSF).  (He has a web page at
`http://world.std.com/%7Eburley'.)

   As with other GNU software, funding is important because it can pay
for needed equipment, personnel, and so on.

   The FSF provides information on the best way to fund ongoing
development of GNU software (such as GNU Fortran) in documents such as
the "GNUS Bulletin".  Email <gnu@gnu.org> for information on funding
the FSF.

   To fund specific GNU Fortran work in particular, the FSF might
provide a means for that, but the FSF does not provide direct funding
to the author of GNU Fortran to continue his work.  The FSF has
employee salary restrictions that can be incompatible with the
financial needs of some volunteers, who therefore choose to remain
volunteers and thus be able to be free to do contract work and
otherwise make their own schedules for doing GNU work.

   Still, funding the FSF at least indirectly benefits work on specific
projects like GNU Fortran because it ensures the continuing operation
of the FSF offices, their workstations, their network connections, and
so on, which are invaluable to volunteers.  (Similarly, hiring Cygnus
Support can help a project like GNU Fortran--Cygnus has been a
long-time donor of equipment usage to the author of GNU Fortran, and
this too has been invaluable--see *Note Contributors::.)

   Currently, the only way to directly fund the author of GNU Fortran
in his work on that project is to hire him for the work you want him to
do, or donate money to him.  Several people have done this already,
with the result that he has not needed to immediately find contract
work on a few occasions.  If more people did this, he would be able to
plan on not doing contract work for many months and could thus devote
that time to work on projects (such as the planned changes for 0.6)
that require longer timeframes to complete.  For the latest information
on the status of the author, do `finger -l burley@gnu.org' on a UNIX
system (or any system with a command like UNIX `finger').

   Another important way to support work on GNU Fortran is to volunteer
to help out.  Work is needed on documentation, testing, porting to
various machines, and in some cases, coding (although major changes
planned for version 0.6 make it difficult to add manpower to this area).
Email <gcc@gcc.gnu.org> to volunteer for this work.

   *Note Funding Free Software: Funding, for more information.


File: g77,  Node: Look and Feel,  Next: Getting Started,  Prev: Funding GNU Fortran,  Up: Top

3 Protect Your Freedom--Fight "Look And Feel"
*********************************************

   To preserve the ability to write free software, including
replacements for proprietary software, authors must be free to
replicate the user interface to which users of existing software have
become accustomed.

   *Note Protect Your Freedom--Fight "Look And Feel": (gcc)Look and
Feel, for more information.


File: g77,  Node: Getting Started,  Next: What is GNU Fortran?,  Prev: Look and Feel,  Up: Top

4 Getting Started
*****************

   If you don't need help getting started reading the portions of this
manual that are most important to you, you should skip this portion of
the manual.

   If you are new to compilers, especially Fortran compilers, or new to
how compilers are structured under UNIX and UNIX-like systems, you'll
want to see *Note What is GNU Fortran?::.

   If you are new to GNU compilers, or have used only one GNU compiler
in the past and not had to delve into how it lets you manage various
versions and configurations of `gcc', you should see *Note G77 and
GCC::.

   Everyone except experienced `g77' users should see *Note Invoking
G77::.

   If you're acquainted with previous versions of `g77', you should see
*Note News About GNU Fortran: News.  Further, if you've actually used
previous versions of `g77', especially if you've written or modified
Fortran code to be compiled by previous versions of `g77', you should
see *Note Changes::.

   If you intend to write or otherwise compile code that is not already
strictly conforming ANSI FORTRAN 77--and this is probably everyone--you
should see *Note Language::.

   If you don't already have `g77' installed on your system, you must
see *Note Installation::.

   If you run into trouble getting Fortran code to compile, link, run,
or work properly, you might find answers if you see *Note Debugging and
Interfacing::, see *Note Collected Fortran Wisdom::, and see *Note
Trouble::.  You might also find that the problems you are encountering
are bugs in `g77'--see *Note Bugs::, for information on reporting them,
after reading the other material.

   If you need further help with `g77', or with freely redistributable
software in general, see *Note Service::.

   If you would like to help the `g77' project, see *Note Funding GNU
Fortran::, for information on helping financially, and see *Note
Projects::, for information on helping in other ways.

   If you're generally curious about the future of `g77', see *Note
Projects::.  If you're curious about its past, see *Note Contributors::,
and see *Note Funding GNU Fortran::.

   To see a few of the questions maintainers of `g77' have, and that
you might be able to answer, see *Note Open Questions::.


File: g77,  Node: What is GNU Fortran?,  Next: G77 and GCC,  Prev: Getting Started,  Up: Top

5 What is GNU Fortran?
**********************

   GNU Fortran, or `g77', is designed initially as a free replacement
for, or alternative to, the UNIX `f77' command.  (Similarly, `gcc' is
designed as a replacement for the UNIX `cc' command.)

   `g77' also is designed to fit in well with the other fine GNU
compilers and tools.

   Sometimes these design goals conflict--in such cases, resolution
often is made in favor of fitting in well with Project GNU.  These
cases are usually identified in the appropriate sections of this manual.

   As compilers, `g77', `gcc', and `f77' share the following
characteristics:

   * They read a user's program, stored in a file and containing
     instructions written in the appropriate language (Fortran, C, and
     so on).  This file contains "source code".

   * They translate the user's program into instructions a computer can
     carry out more quickly than it takes to translate the instructions
     in the first place.  These instructions are called "machine
     code"--code designed to be efficiently translated and processed by
     a machine such as a computer.  Humans usually aren't as good
     writing machine code as they are at writing Fortran or C, because
     it is easy to make tiny mistakes writing machine code.  When
     writing Fortran or C, it is easy to make big mistakes.

   * They provide information in the generated machine code that can
     make it easier to find bugs in the program (using a debugging
     tool, called a "debugger", such as `gdb').

   * They locate and gather machine code already generated to perform
     actions requested by statements in the user's program.  This
     machine code is organized into "libraries" and is located and
     gathered during the "link" phase of the compilation process.
     (Linking often is thought of as a separate step, because it can be
     directly invoked via the `ld' command.  However, the `g77' and
     `gcc' commands, as with most compiler commands, automatically
     perform the linking step by calling on `ld' directly, unless asked
     to not do so by the user.)

   * They attempt to diagnose cases where the user's program contains
     incorrect usages of the language.  The "diagnostics" produced by
     the compiler indicate the problem and the location in the user's
     source file where the problem was first noticed.  The user can use
     this information to locate and fix the problem.  (Sometimes an
     incorrect usage of the language leads to a situation where the
     compiler can no longer make any sense of what follows--while a
     human might be able to--and thus ends up complaining about many
     "problems" it encounters that, in fact, stem from just one
     problem, usually the first one reported.)

   * They attempt to diagnose cases where the user's program contains a
     correct usage of the language, but instructs the computer to do
     something questionable.  These diagnostics often are in the form
     of "warnings", instead of the "errors" that indicate incorrect
     usage of the language.

   How these actions are performed is generally under the control of
the user.  Using command-line options, the user can specify how
persnickety the compiler is to be regarding the program (whether to
diagnose questionable usage of the language), how much time to spend
making the generated machine code run faster, and so on.

   `g77' consists of several components:

   * A modified version of the `gcc' command, which also might be
     installed as the system's `cc' command.  (In many cases, `cc'
     refers to the system's "native" C compiler, which might be a
     non-GNU compiler, or an older version of `gcc' considered more
     stable or that is used to build the operating system kernel.)

   * The `g77' command itself, which also might be installed as the
     system's `f77' command.

   * The `libg2c' run-time library.  This library contains the machine
     code needed to support capabilities of the Fortran language that
     are not directly provided by the machine code generated by the
     `g77' compilation phase.

     `libg2c' is just the unique name `g77' gives to its version of
     `libf2c' to distinguish it from any copy of `libf2c' installed
     from `f2c' (or versions of `g77' that built `libf2c' under that
     same name) on the system.

     The maintainer of `libf2c' currently is <dmg@bell-labs.com>.

   * The compiler itself, internally named `f771'.

     Note that `f771' does not generate machine code directly--it
     generates "assembly code" that is a more readable form of machine
     code, leaving the conversion to actual machine code to an
     "assembler", usually named `as'.

   `gcc' is often thought of as "the C compiler" only, but it does more
than that.  Based on command-line options and the names given for files
on the command line, `gcc' determines which actions to perform,
including preprocessing, compiling (in a variety of possible
languages), assembling, and linking.

   For example, the command `gcc foo.c' "drives" the file `foo.c'
through the preprocessor `cpp', then the C compiler (internally named
`cc1'), then the assembler (usually `as'), then the linker (`ld'),
producing an executable program named `a.out' (on UNIX systems).

   As another example, the command `gcc foo.cc' would do much the same
as `gcc foo.c', but instead of using the C compiler named `cc1', `gcc'
would use the C++ compiler (named `cc1plus').

   In a GNU Fortran installation, `gcc' recognizes Fortran source files
by name just like it does C and C++ source files.  It knows to use the
Fortran compiler named `f771', instead of `cc1' or `cc1plus', to
compile Fortran files.

   Non-Fortran-related operation of `gcc' is generally unaffected by
installing the GNU Fortran version of `gcc'.  However, without the
installed version of `gcc' being the GNU Fortran version, `gcc' will
not be able to compile and link Fortran programs--and since `g77' uses
`gcc' to do most of the actual work, neither will `g77'!

   The `g77' command is essentially just a front-end for the `gcc'
command.  Fortran users will normally use `g77' instead of `gcc',
because `g77' knows how to specify the libraries needed to link with
Fortran programs (`libg2c' and `lm').  `g77' can still compile and link
programs and source files written in other languages, just like `gcc'.

   The command `g77 -v' is a quick way to display lots of version
information for the various programs used to compile a typical
preprocessed Fortran source file--this produces much more output than
`gcc -v' currently does.  (If it produces an error message near the end
of the output--diagnostics from the linker, usually `ld'--you might
have an out-of-date `libf2c' that improperly handles complex
arithmetic.)  In the output of this command, the line beginning `GNU
Fortran Front End' identifies the version number of GNU Fortran;
immediately preceding that line is a line identifying the version of
`gcc' with which that version of `g77' was built.

   The `libf2c' library is distributed with GNU Fortran for the
convenience of its users, but is not part of GNU Fortran.  It contains
the procedures needed by Fortran programs while they are running.

   For example, while code generated by `g77' is likely to do
additions, subtractions, and multiplications "in line"--in the actual
compiled code--it is not likely to do trigonometric functions this way.

   Instead, operations like trigonometric functions are compiled by the
`f771' compiler (invoked by `g77' when compiling Fortran code) into
machine code that, when run, calls on functions in `libg2c', so
`libg2c' must be linked with almost every useful program having any
component compiled by GNU Fortran.  (As mentioned above, the `g77'
command takes care of all this for you.)

   The `f771' program represents most of what is unique to GNU Fortran.
While much of the `libg2c' component comes from the `libf2c' component
of `f2c', a free Fortran-to-C converter distributed by Bellcore (AT&T),
plus `libU77', provided by Dave Love, and the `g77' command is just a
small front-end to `gcc', `f771' is a combination of two rather large
chunks of code.

   One chunk is the so-called "GNU Back End", or GBE, which knows how
to generate fast code for a wide variety of processors.  The same GBE
is used by the C, C++, and Fortran compiler programs `cc1', `cc1plus',
and `f771', plus others.  Often the GBE is referred to as the "gcc back
end" or even just "gcc"--in this manual, the term GBE is used whenever
the distinction is important.

   The other chunk of `f771' is the majority of what is unique about
GNU Fortran--the code that knows how to interpret Fortran programs to
determine what they are intending to do, and then communicate that
knowledge to the GBE for actual compilation of those programs.  This
chunk is called the "Fortran Front End" (FFE).  The `cc1' and `cc1plus'
programs have their own front ends, for the C and C++ languages,
respectively.  These fronts ends are responsible for diagnosing
incorrect usage of their respective languages by the programs the
process, and are responsible for most of the warnings about
questionable constructs as well.  (The GBE handles producing some
warnings, like those concerning possible references to undefined
variables.)

   Because so much is shared among the compilers for various languages,
much of the behavior and many of the user-selectable options for these
compilers are similar.  For example, diagnostics (error messages and
warnings) are similar in appearance; command-line options like `-Wall'
have generally similar effects; and the quality of generated code (in
terms of speed and size) is roughly similar (since that work is done by
the shared GBE).


File: g77,  Node: G77 and GCC,  Next: Invoking G77,  Prev: What is GNU Fortran?,  Up: Top

6 Compile Fortran, C, or Other Programs
***************************************

   A GNU Fortran installation includes a modified version of the `gcc'
command.

   In a non-Fortran installation, `gcc' recognizes C, C++, and
Objective-C source files.

   In a GNU Fortran installation, `gcc' also recognizes Fortran source
files and accepts Fortran-specific command-line options, plus some
command-line options that are designed to cater to Fortran users but
apply to other languages as well.

   *Note Compile C; C++; or Objective-C: (gcc)G++ and GCC, for
information on the way different languages are handled by the GNU CC
compiler (`gcc').

   Also provided as part of GNU Fortran is the `g77' command.  The
`g77' command is designed to make compiling and linking Fortran
programs somewhat easier than when using the `gcc' command for these
tasks.  It does this by analyzing the command line somewhat and
changing it appropriately before submitting it to the `gcc' command.

   Use the `-v' option with `g77' to see what is going on--the first
line of output is the invocation of the `gcc' command.


File: g77,  Node: Invoking G77,  Next: News,  Prev: G77 and GCC,  Up: Top

7 GNU Fortran Command Options
*****************************

   The `g77' command supports all the options supported by the `gcc'
command.  *Note GNU CC Command Options: (gcc)Invoking GCC, for
information on the non-Fortran-specific aspects of the `gcc' command
(and, therefore, the `g77' command).

   All `gcc' and `g77' options are accepted both by `g77' and by `gcc'
(as well as any other drivers built at the same time, such as `g++'),
since adding `g77' to the `gcc' distribution enables acceptance of
`g77'-specific options by all of the relevant drivers.

   In some cases, options have positive and negative forms; the
negative form of `-ffoo' would be `-fno-foo'.  This manual documents
only one of these two forms, whichever one is not the default.

* Menu:

* Option Summary::      Brief list of all `g77' options,
                        without explanations.
* Overall Options::     Controlling the kind of output:
                        an executable, object files, assembler files,
                        or preprocessed source.
* Shorthand Options::   Options that are shorthand for other options.
* Fortran Dialect Options::  Controlling the variant of Fortran language
                             compiled.
* Warning Options::     How picky should the compiler be?
* Debugging Options::   Symbol tables, measurements, and debugging dumps.
* Optimize Options::    How much optimization?
* Preprocessor Options:: Controlling header files and macro definitions.
                         Also, getting dependency information for Make.
* Directory Options::   Where to find header files and libraries.
                        Where to find the compiler executable files.
* Code Gen Options::    Specifying conventions for function calls, data layout
                        and register usage.
* Environment Variables:: Env vars that affect GNU Fortran.


File: g77,  Node: Option Summary,  Next: Overall Options,  Up: Invoking G77

7.1 Option Summary
==================

   Here is a summary of all the options specific to GNU Fortran, grouped
by type.  Explanations are in the following sections.

_Overall Options_
     *Note Options Controlling the Kind of Output: Overall Options.
          -fversion  -fset-g77-defaults  -fno-silent

_Shorthand Options_
     *Note Shorthand Options::.
          -ff66  -fno-f66  -ff77  -fno-f77  -fno-ugly

_Fortran Language Options_
     *Note Options Controlling Fortran Dialect: Fortran Dialect Options.
          -ffree-form  -fno-fixed-form  -ff90
          -fvxt  -fdollar-ok  -fno-backslash
          -fno-ugly-args  -fno-ugly-assign  -fno-ugly-assumed
          -fugly-comma  -fugly-complex  -fugly-init  -fugly-logint
          -fonetrip  -ftypeless-boz
          -fintrin-case-initcap  -fintrin-case-upper
          -fintrin-case-lower  -fintrin-case-any
          -fmatch-case-initcap  -fmatch-case-upper
          -fmatch-case-lower  -fmatch-case-any
          -fsource-case-upper -fsource-case-lower  -fsource-case-preserve
          -fsymbol-case-initcap  -fsymbol-case-upper
          -fsymbol-case-lower  -fsymbol-case-any
          -fcase-strict-upper  -fcase-strict-lower
          -fcase-initcap  -fcase-upper  -fcase-lower  -fcase-preserve
          -ff2c-intrinsics-delete  -ff2c-intrinsics-hide
          -ff2c-intrinsics-disable  -ff2c-intrinsics-enable
          -fbadu77-intrinsics-delete  -fbadu77-intrinsics-hide
          -fbadu77-intrinsics-disable  -fbadu77-intrinsics-enable
          -ff90-intrinsics-delete  -ff90-intrinsics-hide
          -ff90-intrinsics-disable  -ff90-intrinsics-enable
          -fgnu-intrinsics-delete  -fgnu-intrinsics-hide
          -fgnu-intrinsics-disable  -fgnu-intrinsics-enable
          -fmil-intrinsics-delete  -fmil-intrinsics-hide
          -fmil-intrinsics-disable  -fmil-intrinsics-enable
          -funix-intrinsics-delete  -funix-intrinsics-hide
          -funix-intrinsics-disable  -funix-intrinsics-enable
          -fvxt-intrinsics-delete  -fvxt-intrinsics-hide
          -fvxt-intrinsics-disable  -fvxt-intrinsics-enable
          -ffixed-line-length-N  -ffixed-line-length-none

_Warning Options_
     *Note Options to Request or Suppress Warnings: Warning Options.
          -fsyntax-only  -pedantic  -pedantic-errors  -fpedantic
          -w  -Wno-globals  -Wimplicit -Wunused  -Wuninitialized
          -Wall  -Wsurprising
          -Werror  -W

_Debugging Options_
     *Note Options for Debugging Your Program or GCC: Debugging Options.
          -g

_Optimization Options_
     *Note Options that Control Optimization: Optimize Options.
          -malign-double
          -ffloat-store  -fforce-mem  -fforce-addr  -fno-inline
          -ffast-math  -fstrength-reduce  -frerun-cse-after-loop
          -fexpensive-optimizations  -fdelayed-branch
          -fschedule-insns  -fschedule-insn2  -fcaller-saves
          -funroll-loops  -funroll-all-loops
          -fno-move-all-movables  -fno-reduce-all-givs
          -fno-rerun-loop-opt

_Directory Options_
     *Note Options for Directory Search: Directory Options.
          -IDIR  -I-

_Code Generation Options_
     *Note Options for Code Generation Conventions: Code Gen Options.
          -fno-automatic  -finit-local-zero  -fno-f2c
          -ff2c-library  -fno-underscoring  -fno-ident
          -fpcc-struct-return  -freg-struct-return
          -fshort-double  -fno-common  -fpack-struct
          -fzeros  -fno-second-underscore
          -fdebug-kludge  -femulate-complex
          -falias-check  -fargument-alias
          -fargument-noalias  -fno-argument-noalias-global
          -fno-globals  -fflatten-arrays
          -fbounds-check  -ffortran-bounds-check

* Menu:

* Overall Options::     Controlling the kind of output:
                        an executable, object files, assembler files,
                        or preprocessed source.
* Shorthand Options::   Options that are shorthand for other options.
* Fortran Dialect Options::  Controlling the variant of Fortran language
                             compiled.
* Warning Options::     How picky should the compiler be?
* Debugging Options::   Symbol tables, measurements, and debugging dumps.
* Optimize Options::    How much optimization?
* Preprocessor Options:: Controlling header files and macro definitions.
                         Also, getting dependency information for Make.
* Directory Options::   Where to find header files and libraries.
                        Where to find the compiler executable files.
* Code Gen Options::    Specifying conventions for function calls, data layout
                        and register usage.


File: g77,  Node: Overall Options,  Next: Shorthand Options,  Prev: Option Summary,  Up: Invoking G77

7.2 Options Controlling the Kind of Output
==========================================

   Compilation can involve as many as four stages: preprocessing, code
generation (often what is really meant by the term "compilation"),
assembly, and linking, always in that order.  The first three stages
apply to an individual source file, and end by producing an object
file; linking combines all the object files (those newly compiled, and
those specified as input) into an executable file.

   For any given input file, the file name suffix determines what kind
of program is contained in the file--that is, the language in which the
program is written is generally indicated by the suffix.  Suffixes
specific to GNU Fortran are listed below.  *Note gcc: (Using and
Porting GNU CC)Overall Options, for information on suffixes recognized
by GNU CC.

`FILE.f'

`FILE.for'

`FILE.FOR'
     Fortran source code that should not be preprocessed.

     Such source code cannot contain any preprocessor directives, such
     as `#include', `#define', `#if', and so on.

     You can force `.f' files to be preprocessed by `cpp' by using `-x
     f77-cpp-input'.  *Note LEX::.

`FILE.F'

`FILE.fpp'

`FILE.FPP'
     Fortran source code that must be preprocessed (by the C
     preprocessor `cpp', which is part of GNU CC).

     Note that preprocessing is not extended to the contents of files
     included by the `INCLUDE' directive--the `#include' preprocessor
     directive must be used instead.

`FILE.r'
     Ratfor source code, which must be preprocessed by the `ratfor'
     command, which is available separately (as it is not yet part of
     the GNU Fortran distribution).  One version in Fortran, adapted
     for use with `g77', is at `ftp://members.aol.com/n8tm/rat7.uue'
     (of uncertain copyright status).  Another, public domain version
     in C is at `http://sepwww.stanford.edu/sep/prof/ratfor.shar.2'.

   UNIX users typically use the `FILE.f' and `FILE.F' nomenclature.
Users of other operating systems, especially those that cannot
distinguish upper-case letters from lower-case letters in their file
names, typically use the `FILE.for' and `FILE.fpp' nomenclature.

   Use of the preprocessor `cpp' allows use of C-like constructs such
as `#define' and `#include', but can lead to unexpected, even mistaken,
results due to Fortran's source file format.  It is recommended that
use of the C preprocessor be limited to `#include' and, in conjunction
with `#define', only `#if' and related directives, thus avoiding
in-line macro expansion entirely.  This recommendation applies
especially when using the traditional fixed source form.  With free
source form, fewer unexpected transformations are likely to happen, but
use of constructs such as Hollerith and character constants can
nevertheless present problems, especially when these are continued
across multiple source lines.  These problems result, primarily, from
differences between the way such constants are interpreted by the C
preprocessor and by a Fortran compiler.

   Another example of a problem that results from using the C
preprocessor is that a Fortran comment line that happens to contain any
characters "interesting" to the C preprocessor, such as a backslash at
the end of the line, is not recognized by the preprocessor as a comment
line, so instead of being passed through "raw", the line is edited
according to the rules for the preprocessor.  For example, the
backslash at the end of the line is removed, along with the subsequent
newline, resulting in the next line being effectively commented
out--unfortunate if that line is a non-comment line of important code!

   _Note:_ The `-traditional' and `-undef' flags are supplied to `cpp'
by default, to help avoid unpleasant surprises.  *Note Options
Controlling the Preprocessor: (gcc)Preprocessor Options.  This means
that ANSI C preprocessor features (such as the `#' operator) aren't
available, and only variables in the C reserved namespace (generally,
names with a leading underscore) are liable to substitution by C
predefines.  Thus, if you want to do system-specific tests, use, for
example, `#ifdef __linux__' rather than `#ifdef linux'.  Use the `-v'
option to see exactly how the preprocessor is invoked.

   Unfortunately, the `-traditional' flag will not avoid an error from
anything that `cpp' sees as an unterminated C comment, such as:
     C Some Fortran compilers accept /* as starting
     C an inline comment.
   *Note Trailing Comment::.

   The following options that affect overall processing are recognized
by the `g77' and `gcc' commands in a GNU Fortran installation:

`-fversion'
     Ensure that the `g77'-specific version of the compiler phase is
     reported, if run, and, starting in `egcs' version 1.1, that
     internal consistency checks in the `f771' program are run.

     This option is supplied automatically when `-v' or `--verbose' is
     specified as a command-line option for `g77' or `gcc' and when the
     resulting commands compile Fortran source files.

`-fset-g77-defaults'
     _Version info:_ This option is obsolete in `egcs' as of version
     1.1.  The effect is instead achieved by the `lang_init_options'
     routine in `egcs/gcc/f/com.c'.

     Set up whatever `gcc' options are to apply to Fortran
     compilations, and avoid running internal consistency checks that
     might take some time.

     This option is supplied automatically when compiling Fortran code
     via the `g77' or `gcc' command.  The description of this option is
     provided so that users seeing it in the output of, say, `g77 -v'
     understand why it is there.

     Also, developers who run `f771' directly might want to specify it
     by hand to get the same defaults as they would running `f771' via
     `g77' or `gcc'.  However, such developers should, after linking a
     new `f771' executable, invoke it without this option once, e.g.
     via `./f771 -quiet < /dev/null', to ensure that they have not
     introduced any internal inconsistencies (such as in the table of
     intrinsics) before proceeding--`g77' will crash with a diagnostic
     if it detects an inconsistency.

`-fno-silent'
     Print (to `stderr') the names of the program units as they are
     compiled, in a form similar to that used by popular UNIX `f77'
     implementations and `f2c'.

   *Note Options Controlling the Kind of Output: (gcc)Overall Options,
for information on more options that control the overall operation of
the `gcc' command (and, by extension, the `g77' command).


File: g77,  Node: Shorthand Options,  Next: Fortran Dialect Options,  Prev: Overall Options,  Up: Invoking G77

7.3 Shorthand Options
=====================

   The following options serve as "shorthand" for other options
accepted by the compiler:

`-fugly'
     _Note:_ This option is no longer supported.  The information,
     below, is provided to aid in the conversion of old scripts.

     Specify that certain "ugly" constructs are to be quietly accepted.
     Same as:

          -fugly-args -fugly-assign -fugly-assumed
          -fugly-comma -fugly-complex -fugly-init
          -fugly-logint

     These constructs are considered inappropriate to use in new or
     well-maintained portable Fortran code, but widely used in old code.
     *Note Distensions::, for more information.

`-fno-ugly'
     Specify that all "ugly" constructs are to be noisily rejected.
     Same as:

          -fno-ugly-args -fno-ugly-assign -fno-ugly-assumed
          -fno-ugly-comma -fno-ugly-complex -fno-ugly-init
          -fno-ugly-logint

     *Note Distensions::, for more information.

`-ff66'
     Specify that the program is written in idiomatic FORTRAN 66.  Same
     as `-fonetrip -fugly-assumed'.

     The `-fno-f66' option is the inverse of `-ff66'.  As such, it is
     the same as `-fno-onetrip -fno-ugly-assumed'.

     The meaning of this option is likely to be refined as future
     versions of `g77' provide more compatibility with other existing
     and obsolete Fortran implementations.

`-ff77'
     Specify that the program is written in idiomatic UNIX FORTRAN 77
     and/or the dialect accepted by the `f2c' product.  Same as
     `-fbackslash -fno-typeless-boz'.

     The meaning of this option is likely to be refined as future
     versions of `g77' provide more compatibility with other existing
     and obsolete Fortran implementations.

`-fno-f77'
     The `-fno-f77' option is _not_ the inverse of `-ff77'.  It
     specifies that the program is not written in idiomatic UNIX
     FORTRAN 77 or `f2c', but in a more widely portable dialect.
     `-fno-f77' is the same as `-fno-backslash'.

     The meaning of this option is likely to be refined as future
     versions of `g77' provide more compatibility with other existing
     and obsolete Fortran implementations.


File: g77,  Node: Fortran Dialect Options,  Next: Warning Options,  Prev: Shorthand Options,  Up: Invoking G77

7.4 Options Controlling Fortran Dialect
=======================================

   The following options control the dialect of Fortran that the
compiler accepts:

`-ffree-form'

`-fno-fixed-form'
     Specify that the source file is written in free form (introduced
     in Fortran 90) instead of the more-traditional fixed form.

`-ff90'
     Allow certain Fortran-90 constructs.

     This option controls whether certain Fortran 90 constructs are
     recognized.  (Other Fortran 90 constructs might or might not be
     recognized depending on other options such as `-fvxt',
     `-ff90-intrinsics-enable', and the current level of support for
     Fortran 90.)

     *Note Fortran 90::, for more information.

`-fvxt'
     Specify the treatment of certain constructs that have different
     meanings depending on whether the code is written in GNU Fortran
     (based on FORTRAN 77 and akin to Fortran 90) or VXT Fortran (more
     like VAX FORTRAN).

     The default is `-fno-vxt'.  `-fvxt' specifies that the VXT Fortran
     interpretations for those constructs are to be chosen.

     *Note VXT Fortran::, for more information.

`-fdollar-ok'
     Allow `$' as a valid character in a symbol name.

`-fno-backslash'
     Specify that `\' is not to be specially interpreted in character
     and Hollerith constants a la C and many UNIX Fortran compilers.

     For example, with `-fbackslash' in effect, `A\nB' specifies three
     characters, with the second one being newline.  With
     `-fno-backslash', it specifies four characters, `A', `\', `n', and
     `B'.

     Note that `g77' implements a fairly general form of backslash
     processing that is incompatible with the narrower forms supported
     by some other compilers.  For example, `'A\003B'' is a
     three-character string in `g77', whereas other compilers that
     support backslash might not support the three-octal-digit form,
     and thus treat that string as longer than three characters.

     *Note Backslash in Constants::, for information on why
     `-fbackslash' is the default instead of `-fno-backslash'.

`-fno-ugly-args'
     Disallow passing Hollerith and typeless constants as actual
     arguments (for example, `CALL FOO(4HABCD)').

     *Note Ugly Implicit Argument Conversion::, for more information.

`-fugly-assign'
     Use the same storage for a given variable regardless of whether it
     is used to hold an assigned-statement label (as in `ASSIGN 10 TO
     I') or used to hold numeric data (as in `I = 3').

     *Note Ugly Assigned Labels::, for more information.

`-fugly-assumed'
     Assume any dummy array with a final dimension specified as `1' is
     really an assumed-size array, as if `*' had been specified for the
     final dimension instead of `1'.

     For example, `DIMENSION X(1)' is treated as if it had read
     `DIMENSION X(*)'.

     *Note Ugly Assumed-Size Arrays::, for more information.

`-fugly-comma'
     In an external-procedure invocation, treat a trailing comma in the
     argument list as specification of a trailing null argument, and
     treat an empty argument list as specification of a single null
     argument.

     For example, `CALL FOO(,)' is treated as `CALL FOO(%VAL(0),
     %VAL(0))'.  That is, _two_ null arguments are specified by the
     procedure call when `-fugly-comma' is in force.  And `F = FUNC()'
     is treated as `F = FUNC(%VAL(0))'.

     The default behavior, `-fno-ugly-comma', is to ignore a single
     trailing comma in an argument list.  So, by default, `CALL
     FOO(X,)' is treated exactly the same as `CALL FOO(X)'.

     *Note Ugly Null Arguments::, for more information.

`-fugly-complex'
     Do not complain about `REAL(EXPR)' or `AIMAG(EXPR)' when EXPR is a
     `COMPLEX' type other than `COMPLEX(KIND=1)'--usually this is used
     to permit `COMPLEX(KIND=2)' (`DOUBLE COMPLEX') operands.

     The `-ff90' option controls the interpretation of this construct.

     *Note Ugly Complex Part Extraction::, for more information.

`-fno-ugly-init'
     Disallow use of Hollerith and typeless constants as initial values
     (in `PARAMETER' and `DATA' statements), and use of character
     constants to initialize numeric types and vice versa.

     For example, `DATA I/'F'/, CHRVAR/65/, J/4HABCD/' is disallowed by
     `-fno-ugly-init'.

     *Note Ugly Conversion of Initializers::, for more information.

`-fugly-logint'
     Treat `INTEGER' and `LOGICAL' variables and expressions as
     potential stand-ins for each other.

     For example, automatic conversion between `INTEGER' and `LOGICAL'
     is enabled, for many contexts, via this option.

     *Note Ugly Integer Conversions::, for more information.

`-fonetrip'
     Executable iterative `DO' loops are to be executed at least once
     each time they are reached.

     ANSI FORTRAN 77 and more recent versions of the Fortran standard
     specify that the body of an iterative `DO' loop is not executed if
     the number of iterations calculated from the parameters of the
     loop is less than 1.  (For example, `DO 10 I = 1, 0'.)  Such a
     loop is called a "zero-trip loop".

     Prior to ANSI FORTRAN 77, many compilers implemented `DO' loops
     such that the body of a loop would be executed at least once, even
     if the iteration count was zero.  Fortran code written assuming
     this behavior is said to require "one-trip loops".  For example,
     some code written to the FORTRAN 66 standard expects this behavior
     from its `DO' loops, although that standard did not specify this
     behavior.

     The `-fonetrip' option specifies that the source file(s) being
     compiled require one-trip loops.

     This option affects only those loops specified by the (iterative)
     `DO' statement and by implied-`DO' lists in I/O statements.  Loops
     specified by implied-`DO' lists in `DATA' and specification
     (non-executable) statements are not affected.

`-ftypeless-boz'
     Specifies that prefix-radix non-decimal constants, such as
     `Z'ABCD'', are typeless instead of `INTEGER(KIND=1)'.

     You can test for yourself whether a particular compiler treats the
     prefix form as `INTEGER(KIND=1)' or typeless by running the
     following program:

          EQUIVALENCE (I, R)
          R = Z'ABCD1234'
          J = Z'ABCD1234'
          IF (J .EQ. I) PRINT *, 'Prefix form is TYPELESS'
          IF (J .NE. I) PRINT *, 'Prefix form is INTEGER'
          END

     Reports indicate that many compilers process this form as
     `INTEGER(KIND=1)', though a few as typeless, and at least one
     based on a command-line option specifying some kind of
     compatibility.

`-fintrin-case-initcap'

`-fintrin-case-upper'

`-fintrin-case-lower'

`-fintrin-case-any'
     Specify expected case for intrinsic names.  `-fintrin-case-lower'
     is the default.

`-fmatch-case-initcap'

`-fmatch-case-upper'

`-fmatch-case-lower'

`-fmatch-case-any'
     Specify expected case for keywords.  `-fmatch-case-lower' is the
     default.

`-fsource-case-upper'

`-fsource-case-lower'

`-fsource-case-preserve'
     Specify whether source text other than character and Hollerith
     constants is to be translated to uppercase, to lowercase, or
     preserved as is.  `-fsource-case-lower' is the default.

`-fsymbol-case-initcap'

`-fsymbol-case-upper'

`-fsymbol-case-lower'

`-fsymbol-case-any'
     Specify valid cases for user-defined symbol names.
     `-fsymbol-case-any' is the default.

`-fcase-strict-upper'
     Same as `-fintrin-case-upper -fmatch-case-upper
     -fsource-case-preserve -fsymbol-case-upper'.  (Requires all
     pertinent source to be in uppercase.)

`-fcase-strict-lower'
     Same as `-fintrin-case-lower -fmatch-case-lower
     -fsource-case-preserve -fsymbol-case-lower'.  (Requires all
     pertinent source to be in lowercase.)

`-fcase-initcap'
     Same as `-fintrin-case-initcap -fmatch-case-initcap
     -fsource-case-preserve -fsymbol-case-initcap'.  (Requires all
     pertinent source to be in initial capitals, as in `Print
     *,SqRt(Value)'.)

`-fcase-upper'
     Same as `-fintrin-case-any -fmatch-case-any -fsource-case-upper
     -fsymbol-case-any'.  (Maps all pertinent source to uppercase.)

`-fcase-lower'
     Same as `-fintrin-case-any -fmatch-case-any -fsource-case-lower
     -fsymbol-case-any'.  (Maps all pertinent source to lowercase.)

`-fcase-preserve'
     Same as `-fintrin-case-any -fmatch-case-any -fsource-case-preserve
     -fsymbol-case-any'.  (Preserves all case in user-defined symbols,
     while allowing any-case matching of intrinsics and keywords.  For
     example, `call Foo(i,I)' would pass two _different_ variables
     named `i' and `I' to a procedure named `Foo'.)

`-fbadu77-intrinsics-delete'

`-fbadu77-intrinsics-hide'

`-fbadu77-intrinsics-disable'

`-fbadu77-intrinsics-enable'
     Specify status of UNIX intrinsics having inappropriate forms.
     `-fbadu77-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-ff2c-intrinsics-delete'

`-ff2c-intrinsics-hide'

`-ff2c-intrinsics-disable'

`-ff2c-intrinsics-enable'
     Specify status of f2c-specific intrinsics.
     `-ff2c-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-ff90-intrinsics-delete'

`-ff90-intrinsics-hide'

`-ff90-intrinsics-disable'

`-ff90-intrinsics-enable'
     Specify status of F90-specific intrinsics.
     `-ff90-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-fgnu-intrinsics-delete'

`-fgnu-intrinsics-hide'

`-fgnu-intrinsics-disable'

`-fgnu-intrinsics-enable'
     Specify status of Digital's COMPLEX-related intrinsics.
     `-fgnu-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-fmil-intrinsics-delete'

`-fmil-intrinsics-hide'

`-fmil-intrinsics-disable'

`-fmil-intrinsics-enable'
     Specify status of MIL-STD-1753-specific intrinsics.
     `-fmil-intrinsics-enable' is the default.  *Note Intrinsic
     Groups::.

`-funix-intrinsics-delete'

`-funix-intrinsics-hide'

`-funix-intrinsics-disable'

`-funix-intrinsics-enable'
     Specify status of UNIX intrinsics.  `-funix-intrinsics-enable' is
     the default.  *Note Intrinsic Groups::.

`-fvxt-intrinsics-delete'

`-fvxt-intrinsics-hide'

`-fvxt-intrinsics-disable'

`-fvxt-intrinsics-enable'
     Specify status of VXT intrinsics.  `-fvxt-intrinsics-enable' is
     the default.  *Note Intrinsic Groups::.

`-ffixed-line-length-N'
     Set column after which characters are ignored in typical fixed-form
     lines in the source file, and through which spaces are assumed (as
     if padded to that length) after the ends of short fixed-form lines.

     Popular values for N include 72 (the standard and the default), 80
     (card image), and 132 (corresponds to "extended-source" options in
     some popular compilers).  N may be `none', meaning that the entire
     line is meaningful and that continued character constants never
     have implicit spaces appended to them to fill out the line.
     `-ffixed-line-length-0' means the same thing as
     `-ffixed-line-length-none'.

     *Note Source Form::, for more information.


File: g77,  Node: Warning Options,  Next: Debugging Options,  Prev: Fortran Dialect Options,  Up: Invoking G77

7.5 Options to Request or Suppress Warnings
===========================================

   Warnings are diagnostic messages that report constructions which are
not inherently erroneous but which are risky or suggest there might
have been an error.

   You can request many specific warnings with options beginning `-W',
for example `-Wimplicit' to request warnings on implicit declarations.
Each of these specific warning options also has a negative form
beginning `-Wno-' to turn off warnings; for example, `-Wno-implicit'.
This manual lists only one of the two forms, whichever is not the
default.

   These options control the amount and kinds of warnings produced by
GNU Fortran:

`-fsyntax-only'
     Check the code for syntax errors, but don't do anything beyond
     that.

`-pedantic'
     Issue warnings for uses of extensions to ANSI FORTRAN 77.
     `-pedantic' also applies to C-language constructs where they occur
     in GNU Fortran source files, such as use of `\e' in a character
     constant within a directive like `#include'.

     Valid ANSI FORTRAN 77 programs should compile properly with or
     without this option.  However, without this option, certain GNU
     extensions and traditional Fortran features are supported as well.
     With this option, many of them are rejected.

     Some users try to use `-pedantic' to check programs for strict ANSI
     conformance.  They soon find that it does not do quite what they
     want--it finds some non-ANSI practices, but not all.  However,
     improvements to `g77' in this area are welcome.

`-pedantic-errors'
     Like `-pedantic', except that errors are produced rather than
     warnings.

`-fpedantic'
     Like `-pedantic', but applies only to Fortran constructs.

`-w'
     Inhibit all warning messages.

`-Wno-globals'
     Inhibit warnings about use of a name as both a global name (a
     subroutine, function, or block data program unit, or a common
     block) and implicitly as the name of an intrinsic in a source file.

     Also inhibit warnings about inconsistent invocations and/or
     definitions of global procedures (function and subroutines).  Such
     inconsistencies include different numbers of arguments and
     different types of arguments.

`-Wimplicit'
     Warn whenever a variable, array, or function is implicitly
     declared.  Has an effect similar to using the `IMPLICIT NONE'
     statement in every program unit.  (Some Fortran compilers provide
     this feature by an option named `-u' or `/WARNINGS=DECLARATIONS'.)

`-Wunused'
     Warn whenever a variable is unused aside from its declaration.

`-Wuninitialized'
     Warn whenever an automatic variable is used without first being
     initialized.

     These warnings are possible only in optimizing compilation,
     because they require data-flow information that is computed only
     when optimizing.  If you don't specify `-O', you simply won't get
     these warnings.

     These warnings occur only for variables that are candidates for
     register allocation.  Therefore, they do not occur for a variable
     whose address is taken, or whose size is other than 1, 2, 4 or 8
     bytes.  Also, they do not occur for arrays, even when they are in
     registers.

     Note that there might be no warning about a variable that is used
     only to compute a value that itself is never used, because such
     computations may be deleted by data-flow analysis before the
     warnings are printed.

     These warnings are made optional because GNU Fortran is not smart
     enough to see all the reasons why the code might be correct
     despite appearing to have an error.  Here is one example of how
     this can happen:

          SUBROUTINE DISPAT(J)
          IF (J.EQ.1) I=1
          IF (J.EQ.2) I=4
          IF (J.EQ.3) I=5
          CALL FOO(I)
          END

     If the value of `J' is always 1, 2 or 3, then `I' is always
     initialized, but GNU Fortran doesn't know this.  Here is another
     common case:

          SUBROUTINE MAYBE(FLAG)
          LOGICAL FLAG
          IF (FLAG) VALUE = 9.4
          ...
          IF (FLAG) PRINT *, VALUE
          END

     This has no bug because `VALUE' is used only if it is set.

`-Wall'
     The `-Wunused' and `-Wuninitialized' options combined.  These are
     all the options which pertain to usage that we recommend avoiding
     and that we believe is easy to avoid.  (As more warnings are added
     to `g77', some might be added to the list enabled by `-Wall'.)

   The remaining `-W...' options are not implied by `-Wall' because
they warn about constructions that we consider reasonable to use, on
occasion, in clean programs.

`-Wsurprising'
     Warn about "suspicious" constructs that are interpreted by the
     compiler in a way that might well be surprising to someone reading
     the code.  These differences can result in subtle,
     compiler-dependent (even machine-dependent) behavioral differences.
     The constructs warned about include:

        * Expressions having two arithmetic operators in a row, such as
          `X*-Y'.  Such a construct is nonstandard, and can produce
          unexpected results in more complicated situations such as
          `X**-Y*Z'.  `g77', along with many other compilers, interprets
          this example differently than many programmers, and a few
          other compilers.  Specifically, `g77' interprets `X**-Y*Z' as
          `(X**(-Y))*Z', while others might think it should be
          interpreted as `X**(-(Y*Z))'.

          A revealing example is the constant expression `2**-2*1.',
          which `g77' evaluates to .25, while others might evaluate it
          to 0., the difference resulting from the way precedence
          affects type promotion.

          (The `-fpedantic' option also warns about expressions having
          two arithmetic operators in a row.)

        * Expressions with a unary minus followed by an operand and then
          a binary operator other than plus or minus.  For example,
          `-2**2' produces a warning, because the precedence is
          `-(2**2)', yielding -4, not `(-2)**2', which yields 4, and
          which might represent what a programmer expects.

          An example of an expression producing different results in a
          surprising way is `-I*S', where I holds the value
          `-2147483648' and S holds `0.5'.  On many systems, negating I
          results in the same value, not a positive number, because it
          is already the lower bound of what an `INTEGER(KIND=1)'
          variable can hold.  So, the expression evaluates to a
          positive number, while the "expected" interpretation,
          `(-I)*S', would evaluate to a negative number.

          Even cases such as `-I*J' produce warnings, even though, in
          most configurations and situations, there is no computational
          difference between the results of the two
          interpretations--the purpose of this warning is to warn about
          differing interpretations and encourage a better style of
          coding, not to identify only those places where bugs might
          exist in the user's code.

        * `DO' loops with `DO' variables that are not of integral
          type--that is, using `REAL' variables as loop control
          variables.  Although such loops can be written to work in the
          "obvious" way, the way `g77' is required by the Fortran
          standard to interpret such code is likely to be quite
          different from the way many programmers expect.  (This is
          true of all `DO' loops, but the differences are pronounced
          for non-integral loop control variables.)

          *Note Loops::, for more information.

`-Werror'
     Make all warnings into errors.

`-W'
     Turns on "extra warnings" and, if optimization is specified via
     `-O', the `-Wuninitialized' option.  (This might change in future
     versions of `g77'.)

     "Extra warnings" are issued for:

        * Unused parameters to a procedure (when `-Wunused' also is
          specified).

        * Overflows involving floating-point constants (not available
          for certain configurations).

   *Note Options to Request or Suppress Warnings: (gcc)Warning Options,
for information on more options offered by the GBE shared by `g77',
`gcc', and other GNU compilers.

   Some of these have no effect when compiling programs written in
Fortran:

`-Wcomment'

`-Wformat'

`-Wparentheses'

`-Wswitch'

`-Wtraditional'

`-Wshadow'

`-Wid-clash-LEN'

`-Wlarger-than-LEN'

`-Wconversion'

`-Waggregate-return'

`-Wredundant-decls'
     These options all could have some relevant meaning for GNU Fortran
     programs, but are not yet supported.


File: g77,  Node: Debugging Options,  Next: Optimize Options,  Prev: Warning Options,  Up: Invoking G77

7.6 Options for Debugging Your Program or GNU Fortran
=====================================================

   GNU Fortran has various special options that are used for debugging
either your program or `g77'.

`-g'
     Produce debugging information in the operating system's native
     format (stabs, COFF, XCOFF, or DWARF).  GDB can work with this
     debugging information.

     Support for this option in Fortran programs is incomplete.  In
     particular, names of variables and arrays in common blocks or that
     are storage-associated via `EQUIVALENCE' are unavailable to the
     debugger.

     However, version 0.5.19 of `g77' does provide this information in
     a rudimentary way, as controlled by the `-fdebug-kludge' option.

     *Note Options for Code Generation Conventions: Code Gen Options,
     for more information.

   *Note Options for Debugging Your Program or GNU CC: (gcc)Debugging
Options, for more information on debugging options.


File: g77,  Node: Optimize Options,  Next: Preprocessor Options,  Prev: Debugging Options,  Up: Invoking G77

7.7 Options That Control Optimization
=====================================

   Most Fortran users will want to use no optimization when developing
and testing programs, and use `-O' or `-O2' when compiling programs for
late-cycle testing and for production use.  However, note that certain
diagnostics--such as for uninitialized variables--depend on the flow
analysis done by `-O', i.e. you must use `-O' or `-O2' to get such
diagnostics.

   The following flags have particular applicability when compiling
Fortran programs:

`-malign-double'
     (Intel x86 architecture only.)

     Noticeably improves performance of `g77' programs making heavy use
     of `REAL(KIND=2)' (`DOUBLE PRECISION') data on some systems.  In
     particular, systems using Pentium, Pentium Pro, 586, and 686
     implementations of the i386 architecture execute programs faster
     when `REAL(KIND=2)' (`DOUBLE PRECISION') data are aligned on
     64-bit boundaries in memory.

     This option can, at least, make benchmark results more consistent
     across various system configurations, versions of the program, and
     data sets.

     _Note:_ The warning in the `gcc' documentation about this option
     does not apply, generally speaking, to Fortran code compiled by
     `g77'.

     *Note Aligned Data::, for more information on alignment issues.

     _Also also note:_ The negative form of `-malign-double' is
     `-mno-align-double', not `-benign-double'.

`-ffloat-store'
     Might help a Fortran program that depends on exact IEEE
     conformance on some machines, but might slow down a program that
     doesn't.

     This option is effective when the floating-point unit is set to
     work in IEEE 854 `extended precision'--as it typically is on x86
     and m68k GNU systems--rather than IEEE 754 double precision.
     `-ffloat-store' tries to remove the extra precision by spilling
     data from floating-point registers into memory and this typically
     involves a big performance hit.  However, it doesn't affect
     intermediate results, so that it is only partially effective.
     `Excess precision' is avoided in code like:
          a = b + c
          d = a * e
     but not in code like:
                d = (b + c) * e

     For another, potentially better, way of controlling the precision,
     see *Note Floating-point precision::.

`-fforce-mem'

`-fforce-addr'
     Might improve optimization of loops.

`-fno-inline'
     Don't compile statement functions inline.  Might reduce the size
     of a program unit--which might be at expense of some speed (though
     it should compile faster).  Note that if you are not optimizing,
     no functions can be expanded inline.

`-ffast-math'
     Might allow some programs designed to not be too dependent on IEEE
     behavior for floating-point to run faster, or die trying.

`-fstrength-reduce'
     Might make some loops run faster.

`-frerun-cse-after-loop'

`-fexpensive-optimizations'

`-fdelayed-branch'

`-fschedule-insns'

`-fschedule-insns2'

`-fcaller-saves'
     Might improve performance on some code.

`-funroll-loops'
     Typically improves performance on code using iterative `DO' loops
     by unrolling them and is probably generally appropriate for
     Fortran, though it is not turned on at any optimization level.
     Note that outer loop unrolling isn't done specifically; decisions
     about whether to unroll a loop are made on the basis of its
     instruction count.

     Also, no `loop discovery'(1) is done, so only loops written with
     `DO' benefit from loop optimizations, including--but not limited
     to--unrolling.  Loops written with `IF' and `GOTO' are not
     currently recognized as such.  This option unrolls only iterative
     `DO' loops, not `DO WHILE' loops.

`-funroll-all-loops'
     Probably improves performance on code using `DO WHILE' loops by
     unrolling them in addition to iterative `DO' loops.  In the absence
     of `DO WHILE', this option is equivalent to `-funroll-loops' but
     possibly slower.

`-fno-move-all-movables'

`-fno-reduce-all-givs'

`-fno-rerun-loop-opt'
     _Version info:_ These options are not supported by versions of
     `g77' based on `gcc' version 2.8.

     Each of these might improve performance on some code.

     Analysis of Fortran code optimization and the resulting
     optimizations triggered by the above options were contributed by
     Toon Moene (<toon@moene.indiv.nluug.nl>).

     These three options are intended to be removed someday, once they
     have helped determine the efficacy of various approaches to
     improving the performance of Fortran code.

     Please let us know how use of these options affects the
     performance of your production code.  We're particularly
     interested in code that runs faster when these options are
     _disabled_, and in non-Fortran code that benefits when they are
     _enabled_ via the above `gcc' command-line options.

   *Note Options That Control Optimization: (gcc)Optimize Options, for
more information on options to optimize the generated machine code.

   ---------- Footnotes ----------

   (1) "loop discovery" refers to the process by which a compiler, or
indeed any reader of a program, determines which portions of the
program are more likely to be executed repeatedly as it is being run.
Such discovery typically is done early when compiling using
optimization techniques, so the "discovered" loops get more
attention--and more run-time resources, such as registers--from the
compiler.  It is easy to "discover" loops that are constructed out of
looping constructs in the language (such as Fortran's `DO').  For some
programs, "discovering" loops constructed out of lower-level constructs
(such as `IF' and `GOTO') can lead to generation of more optimal code
than otherwise.


File: g77,  Node: Preprocessor Options,  Next: Directory Options,  Prev: Optimize Options,  Up: Invoking G77

7.8 Options Controlling the Preprocessor
========================================

   These options control the C preprocessor, which is run on each C
source file before actual compilation.

   *Note Options Controlling the Preprocessor: (gcc)Preprocessor
Options, for information on C preprocessor options.

   Some of these options also affect how `g77' processes the `INCLUDE'
directive.  Since this directive is processed even when preprocessing
is not requested, it is not described in this section.  *Note Options
for Directory Search: Directory Options, for information on how `g77'
processes the `INCLUDE' directive.

   However, the `INCLUDE' directive does not apply preprocessing to the
contents of the included file itself.

   Therefore, any file that contains preprocessor directives (such as
`#include', `#define', and `#if') must be included via the `#include'
directive, not via the `INCLUDE' directive.  Therefore, any file
containing preprocessor directives, if included, is necessarily
included by a file that itself contains preprocessor directives.


File: g77,  Node: Directory Options,  Next: Code Gen Options,  Prev: Preprocessor Options,  Up: Invoking G77

7.9 Options for Directory Search
================================

   These options affect how the `cpp' preprocessor searches for files
specified via the `#include' directive.  Therefore, when compiling
Fortran programs, they are meaningful when the preprocessor is used.

   Some of these options also affect how `g77' searches for files
specified via the `INCLUDE' directive, although files included by that
directive are not, themselves, preprocessed.  These options are:

`-I-'

`-IDIR'
     These affect interpretation of the `INCLUDE' directive (as well as
     of the `#include' directive of the `cpp' preprocessor).

     Note that `-IDIR' must be specified _without_ any spaces between
     `-I' and the directory name--that is, `-Ifoo/bar' is valid, but
     `-I foo/bar' is rejected by the `g77' compiler (though the
     preprocessor supports the latter form).  Also note that the
     general behavior of `-I' and `INCLUDE' is pretty much the same as
     of `-I' with `#include' in the `cpp' preprocessor, with regard to
     looking for `header.gcc' files and other such things.

     *Note Options for Directory Search: (gcc)Directory Options, for
     information on the `-I' option.


File: g77,  Node: Code Gen Options,  Next: Environment Variables,  Prev: Directory Options,  Up: Invoking G77

7.10 Options for Code Generation Conventions
============================================

   These machine-independent options control the interface conventions
used in code generation.

   Most of them have both positive and negative forms; the negative form
of `-ffoo' would be `-fno-foo'.  In the table below, only one of the
forms is listed--the one which is not the default.  You can figure out
the other form by either removing `no-' or adding it.

`-fno-automatic'
     Treat each program unit as if the `SAVE' statement was specified
     for every local variable and array referenced in it.  Does not
     affect common blocks.  (Some Fortran compilers provide this option
     under the name `-static'.)

`-finit-local-zero'
     Specify that variables and arrays that are local to a program unit
     (not in a common block and not passed as an argument) are to be
     initialized to binary zeros.

     Since there is a run-time penalty for initialization of variables
     that are not given the `SAVE' attribute, it might be a good idea
     to also use `-fno-automatic' with `-finit-local-zero'.

`-fno-f2c'
     Do not generate code designed to be compatible with code generated
     by `f2c'; use the GNU calling conventions instead.

     The `f2c' calling conventions require functions that return type
     `REAL(KIND=1)' to actually return the C type `double', and
     functions that return type `COMPLEX' to return the values via an
     extra argument in the calling sequence that points to where to
     store the return value.  Under the GNU calling conventions, such
     functions simply return their results as they would in GNU
     C--`REAL(KIND=1)' functions return the C type `float', and
     `COMPLEX' functions return the GNU C type `complex' (or its
     `struct' equivalent).

     This does not affect the generation of code that interfaces with
     the `libg2c' library.

     However, because the `libg2c' library uses `f2c' calling
     conventions, `g77' rejects attempts to pass intrinsics implemented
     by routines in this library as actual arguments when `-fno-f2c' is
     used, to avoid bugs when they are actually called by code
     expecting the GNU calling conventions to work.

     For example, `INTRINSIC ABS;CALL FOO(ABS)' is rejected when
     `-fno-f2c' is in force.  (Future versions of the `g77' run-time
     library might offer routines that provide GNU-callable versions of
     the routines that implement the `f2c'-callable intrinsics that may
     be passed as actual arguments, so that valid programs need not be
     rejected when `-fno-f2c' is used.)

     *Caution:* If `-fno-f2c' is used when compiling any source file
     used in a program, it must be used when compiling _all_ Fortran
     source files used in that program.

`-ff2c-library'
     Specify that use of `libg2c' (or the original `libf2c') is
     required.  This is the default for the current version of `g77'.

     Currently it is not valid to specify `-fno-f2c-library'.  This
     option is provided so users can specify it in shell scripts that
     build programs and libraries that require the `libf2c' library,
     even when being compiled by future versions of `g77' that might
     otherwise default to generating code for an incompatible library.

`-fno-underscoring'
     Do not transform names of entities specified in the Fortran source
     file by appending underscores to them.

     With `-funderscoring' in effect, `g77' appends two underscores to
     names with underscores and one underscore to external names with
     no underscores.  (`g77' also appends two underscores to internal
     names with underscores to avoid naming collisions with external
     names.  The `-fno-second-underscore' option disables appending of
     the second underscore in all cases.)

     This is done to ensure compatibility with code produced by many
     UNIX Fortran compilers, including `f2c', which perform the same
     transformations.

     Use of `-fno-underscoring' is not recommended unless you are
     experimenting with issues such as integration of (GNU) Fortran into
     existing system environments (vis-a-vis existing libraries, tools,
     and so on).

     For example, with `-funderscoring', and assuming other defaults
     like `-fcase-lower' and that `j()' and `max_count()' are external
     functions while `my_var' and `lvar' are local variables, a
     statement like

          I = J() + MAX_COUNT (MY_VAR, LVAR)

     is implemented as something akin to:

          i = j_() + max_count__(&my_var__, &lvar);

     With `-fno-underscoring', the same statement is implemented as:

          i = j() + max_count(&my_var, &lvar);

     Use of `-fno-underscoring' allows direct specification of
     user-defined names while debugging and when interfacing
     `g77'-compiled code with other languages.

     Note that just because the names match does _not_ mean that the
     interface implemented by `g77' for an external name matches the
     interface implemented by some other language for that same name.
     That is, getting code produced by `g77' to link to code produced
     by some other compiler using this or any other method can be only a
     small part of the overall solution--getting the code generated by
     both compilers to agree on issues other than naming can require
     significant effort, and, unlike naming disagreements, linkers
     normally cannot detect disagreements in these other areas.

     Also, note that with `-fno-underscoring', the lack of appended
     underscores introduces the very real possibility that a
     user-defined external name will conflict with a name in a system
     library, which could make finding unresolved-reference bugs quite
     difficult in some cases--they might occur at program run time, and
     show up only as buggy behavior at run time.

     In future versions of `g77', we hope to improve naming and linking
     issues so that debugging always involves using the names as they
     appear in the source, even if the names as seen by the linker are
     mangled to prevent accidental linking between procedures with
     incompatible interfaces.

`-fno-second-underscore'
     Do not append a second underscore to names of entities specified
     in the Fortran source file.

     This option has no effect if `-fno-underscoring' is in effect.

     Otherwise, with this option, an external name such as `MAX_COUNT'
     is implemented as a reference to the link-time external symbol
     `max_count_', instead of `max_count__'.

`-fno-ident'
     Ignore the `#ident' directive.

`-fzeros'
     Treat initial values of zero as if they were any other value.

     As of version 0.5.18, `g77' normally treats `DATA' and other
     statements that are used to specify initial values of zero for
     variables and arrays as if no values were actually specified, in
     the sense that no diagnostics regarding multiple initializations
     are produced.

     This is done to speed up compiling of programs that initialize
     large arrays to zeros.

     Use `-fzeros' to revert to the simpler, slower behavior that can
     catch multiple initializations by keeping track of all
     initializations, zero or otherwise.

     _Caution:_ Future versions of `g77' might disregard this option
     (and its negative form, the default) or interpret it somewhat
     differently.  The interpretation changes will affect only
     non-standard programs; standard-conforming programs should not be
     affected.

`-fdebug-kludge'
     Emit information on `COMMON' and `EQUIVALENCE' members that might
     help users of debuggers work around lack of proper debugging
     information on such members.

     As of version 0.5.19, `g77' offers this option to emit information
     on members of aggregate areas to help users while debugging.  This
     information consists of establishing the type and contents of each
     such member so that, when a debugger is asked to print the
     contents, the printed information provides rudimentary debugging
     information.  This information identifies the name of the
     aggregate area (either the `COMMON' block name, or the
     `g77'-assigned name for the `EQUIVALENCE' name) and the offset, in
     bytes, of the member from the beginning of the area.

     Using `gdb', this information is not coherently displayed in the
     Fortran language mode, so temporarily switching to the C language
     mode to display the information is suggested.  Use `set language
     c' and `set language fortran' to accomplish this.

     For example:

                COMMON /X/A,B
                EQUIVALENCE (C,D)
                CHARACTER XX*50
                EQUIVALENCE (I,XX(20:20))
                END
          
          GDB is free software and you are welcome to distribute copies of it
           under certain conditions; type "show copying" to see the conditions.
          There is absolutely no warranty for GDB; type "show warranty" for details.
          GDB 4.16 (lm-gnits-dwim), Copyright 1996 Free Software Foundation, Inc...
          (gdb) b MAIN__
          Breakpoint 1 at 0t1200000201120112: file cd.f, line 5.
          (gdb) r
          Starting program: /home/user/a.out
          
          Breakpoint 1, MAIN__ () at cd.f:5
          Current language:  auto; currently fortran
          (gdb) set language c
          Warning: the current language does not match this frame.
          (gdb) p a
          $2 = "At (COMMON) `x_' plus 0 bytes"
          (gdb) p b
          $3 = "At (COMMON) `x_' plus 4 bytes"
          (gdb) p c
          $4 = "At (EQUIVALENCE) `__g77_equiv_c' plus 0 bytes"
          (gdb) p d
          $5 = "At (EQUIVALENCE) `__g77_equiv_c' plus 0 bytes"
          (gdb) p i
          $6 = "At (EQUIVALENCE) `__g77_equiv_xx' plus 20 bytes"
          (gdb) p xx
          $7 = "At (EQUIVALENCE) `__g77_equiv_xx' plus 1 bytes"
          (gdb) set language fortran
          (gdb)

     Use `-fdebug-kludge' to generate this information, which might
     make some programs noticeably larger.

     _Caution:_ Future versions of `g77' might disregard this option
     (and its negative form).  Current plans call for this to happen
     when published versions of `g77' and `gdb' exist that provide
     proper access to debugging information on `COMMON' and
     `EQUIVALENCE' members.

`-femulate-complex'
     Implement `COMPLEX' arithmetic via emulation, instead of using the
     facilities of the `gcc' back end that provide direct support of
     `complex' arithmetic.

     (`gcc' had some bugs in its back-end support for `complex'
     arithmetic, due primarily to the support not being completed as of
     version 2.8.1 and `egcs' 1.1.2.)

     Use `-femulate-complex' if you suspect code-generation bugs, or
     experience compiler crashes, that might result from `g77' using
     the `COMPLEX' support in the `gcc' back end.  If using that option
     fixes the bugs or crashes you are seeing, that indicates a likely
     `g77' bugs (though, all compiler crashes are considered bugs), so,
     please report it.  (Note that the known bugs, now believed fixed,
     produced compiler crashes rather than causing the generation of
     incorrect code.)

     Use of this option should not affect how Fortran code compiled by
     `g77' works in terms of its interfaces to other code, e.g. that
     compiled by `f2c'.

     _Caution:_ Future versions of `g77' might ignore both forms of
     this option.

`-falias-check'

`-fargument-alias'

`-fargument-noalias'

`-fno-argument-noalias-global'
     _Version info:_ These options are not supported by versions of
     `g77' based on `gcc' version 2.8.

     These options specify to what degree aliasing (overlap) is
     permitted between arguments (passed as pointers) and `COMMON'
     (external, or public) storage.

     The default for Fortran code, as mandated by the FORTRAN 77 and
     Fortran 90 standards, is `-fargument-noalias-global'.  The default
     for code written in the C language family is `-fargument-alias'.

     Note that, on some systems, compiling with `-fforce-addr' in
     effect can produce more optimal code when the default aliasing
     options are in effect (and when optimization is enabled).

     *Note Aliasing Assumed To Work::, for detailed information on the
     implications of compiling Fortran code that depends on the ability
     to alias dummy arguments.

`-fno-globals'
     Disable diagnostics about inter-procedural analysis problems, such
     as disagreements about the type of a function or a procedure's
     argument, that might cause a compiler crash when attempting to
     inline a reference to a procedure within a program unit.  (The
     diagnostics themselves are still produced, but as warnings, unless
     `-Wno-globals' is specified, in which case no relevant diagnostics
     are produced.)

     Further, this option disables such inlining, to avoid compiler
     crashes resulting from incorrect code that would otherwise be
     diagnosed.

     As such, this option might be quite useful when compiling
     existing, "working" code that happens to have a few bugs that do
     not generally show themselves, but which `g77' diagnoses.

     Use of this option therefore has the effect of instructing `g77'
     to behave more like it did up through version 0.5.19.1, when it
     paid little or no attention to disagreements between program units
     about a procedure's type and argument information, and when it
     performed no inlining of procedures (except statement functions).

     Without this option, `g77' defaults to performing the potentially
     inlining procedures as it started doing in version 0.5.20, but as
     of version 0.5.21, it also diagnoses disagreements that might
     cause such inlining to crash the compiler as (fatal) errors, and
     warns about similar disagreements that are currently believed to
     not likely to result in the compiler later crashing or producing
     incorrect code.

`-fflatten-arrays'
     Use back end's C-like constructs (pointer plus offset) instead of
     its `ARRAY_REF' construct to handle all array references.

     _Note:_ This option is not supported.  It is intended for use only
     by `g77' developers, to evaluate code-generation issues.  It might
     be removed at any time.

`-fbounds-check'
`-ffortran-bounds-check'
     Enable generation of run-time checks for array subscripts and
     substring start and end points against the (locally) declared
     minimum and maximum values.

     The current implementation uses the `libf2c' library routine
     `s_rnge' to print the diagnostic.

     However, whereas `f2c' generates a single check per reference for
     a multi-dimensional array, of the computed offset against the
     valid offset range (0 through the size of the array), `g77'
     generates a single check per _subscript_ expression.  This catches
     some cases of potential bugs that `f2c' does not, such as
     references to below the beginning of an assumed-size array.

     `g77' also generates checks for `CHARACTER' substring references,
     something `f2c' currently does not do.

     Use the new `-ffortran-bounds-check' option to specify
     bounds-checking for only the Fortran code you are compiling, not
     necessarily for code written in other languages.

     _Note:_ To provide more detailed information on the offending
     subscript, `g77' provides the `libg2c' run-time library routine
     `s_rnge' with somewhat differently-formatted information.  Here's
     a sample diagnostic:

          Subscript out of range on file line 4, procedure rnge.f/bf.
          Attempt to access the -6-th element of variable b[subscript-2-of-2].
          Aborted

     The above message indicates that the offending source line is line
     4 of the file `rnge.f', within the program unit (or statement
     function) named `bf'.  The offended array is named `b'.  The
     offended array dimension is the second for a two-dimensional array,
     and the offending, computed subscript expression was `-6'.

     For a `CHARACTER' substring reference, the second line has this
     appearance:

          Attempt to access the 11-th element of variable a[start-substring].

     This indicates that the offended `CHARACTER' variable or array is
     named `a', the offended substring position is the starting
     (leftmost) position, and the offending substring expression is
     `11'.

     (Though the verbage of `s_rnge' is not ideal for the purpose of
     the `g77' compiler, the above information should provide adequate
     diagnostic abilities to it users.)

   *Note Options for Code Generation Conventions: (gcc)Code Gen
Options, for information on more options offered by the GBE shared by
`g77', `gcc', and other GNU compilers.

   Some of these do _not_ work when compiling programs written in
Fortran:

`-fpcc-struct-return'

`-freg-struct-return'
     You should not use these except strictly the same way as you used
     them to build the version of `libg2c' with which you will be
     linking all code compiled by `g77' with the same option.

`-fshort-double'
     This probably either has no effect on Fortran programs, or makes
     them act loopy.

`-fno-common'
     Do not use this when compiling Fortran programs, or there will be
     Trouble.

`-fpack-struct'
     This probably will break any calls to the `libg2c' library, at the
     very least, even if it is built with the same option.


File: g77,  Node: Environment Variables,  Prev: Code Gen Options,  Up: Invoking G77

7.11 Environment Variables Affecting GNU Fortran
================================================

   GNU Fortran currently does not make use of any environment variables
to control its operation above and beyond those that affect the
operation of `gcc'.

   *Note Environment Variables Affecting GNU CC: (gcc)Environment
Variables, for information on environment variables.


File: g77,  Node: News,  Next: Changes,  Prev: Invoking G77,  Up: Top

8 News About GNU Fortran
************************

   Changes made to recent versions of GNU Fortran are listed below,
with the most recent version first.

   The changes are generally listed in order:

  1. Code-generation and run-time-library bug-fixes

  2. Compiler and run-time-library crashes involving valid code that
     have been fixed

  3. New features

  4. Fixes and enhancements to existing features

  5. New diagnostics

  6. Internal improvements

  7. Miscellany

   This order is not strict--for example, some items involve a
combination of these elements.

   Note that two variants of `g77' are tracked below.  The `egcs'
variant is described vis-a-vis previous versions of `egcs' and/or an
official FSF version, as appropriate.

   Therefore, `egcs' versions sometimes have multiple listings to help
clarify how they differ from other versions, though this can make
getting a complete picture of what a particular `egcs' version contains
somewhat more difficult.

   For information on bugs in the GCC-2.95 version of `g77', see *Note
Known Bugs In GNU Fortran: Known Bugs.

   An online, "live" version of this document (derived directly from
the mainline, development version of `g77' within `egcs') is available
at `http://www.gnu.org/software/gcc/onlinedocs/g77_news.html'.

   The following information was last updated on 1999-07-08:

In 0.5.25, `GCC' 2.95 (`EGCS' 1.2) versus `EGCS' 1.1.2:
=======================================================

   * `g77' no longer generates bad code for assignments, or other
     conversions, of `REAL' or `COMPLEX' constant expressions to type
     `INTEGER(KIND=2)' (often referred to as `INTEGER*8').

     For example, `INTEGER*8 J; J = 4E10' now works as documented.

   * `g77' no longer truncates `INTEGER(KIND=2)' (usually `INTEGER*8')
     subscript expressions when evaluating array references on systems
     with pointers widers than `INTEGER(KIND=1)' (such as Alphas).

   * `g77' no longer generates bad code for an assignment to a
     `COMPLEX' variable or array that partially overlaps one or more of
     the sources of the same assignment (a very rare construction).  It
     now assigns through a temporary, in cases where such partial
     overlap is deemed possible.

   * `libg2c' (`libf2c') no longer loses track of the file being worked
     on during a `BACKSPACE' operation.

   * `libg2c' (`libf2c') fixes a bug whereby input to a `NAMELIST' read
     involving a repeat count, such as `K(5)=10*3', was not properly
     handled by `libf2c'.  The first item was written to `K(5)', but
     the remaining nine were written elsewhere (still within the array),
     not necessarily starting at `K(6)'.

   * Automatic arrays now seem to be working on HP-UX systems.

   * The `Date' intrinsic now returns the correct result on big-endian
     systems.

   * Fix `g77' so it no longer crashes when compiling I/O statements
     using keywords that define `INTEGER' values, such as `IOSTAT=J',
     where J is other than default `INTEGER' (such as `INTEGER*2').
     Instead, it issues a diagnostic.

   * Fix `g77' so it properly handles `DATA A/RPT*VAL/', where RPT is
     not default `INTEGER', such as `INTEGER*2', instead of producing a
     spurious diagnostic.  Also fix `DATA (A(I),I=1,N)', where `N' is
     not default `INTEGER' to work instead of crashing `g77'.

   * The `-ax' option is now obeyed when compiling Fortran programs.
     (It is passed to the `f771' driver.)

   * The new `-fbounds-check' option causes `g77' to compile run-time
     bounds checks of array subscripts, as well as of substring start
     and end points.

   * `libg2c' now supports building as multilibbed library, which
     provides better support for systems that require options such as
     `-mieee' to work properly.

   * Source file names with the suffixes `.FOR' and `.FPP' now are
     recognized by `g77' as if they ended in `.for' and `.fpp',
     respectively.

   * The order of arguments to the _subroutine_ forms of the `CTime',
     `DTime', `ETime', and `TtyNam' intrinsics has been swapped.  The
     argument serving as the returned value for the corresponding
     function forms now is the _second_ argument, making these
     consistent with the other subroutine forms of `libU77' intrinsics.

   * `g77' now warns about a reference to an intrinsic that has an
     interface that is not Year 2000 (Y2K) compliant.  Also, `libg2c'
     has been changed to increase the likelihood of catching references
     to the implementations of these intrinsics using the `EXTERNAL'
     mechanism (which would avoid the new warnings).

     *Note Year 2000 (Y2K) Problems::, for more information.

   * `g77' now warns about a reference to a function when the
     corresponding _subsequent_ function program unit disagrees with
     the reference concerning the type of the function.

   * `-fno-emulate-complex' is now the default option.  This should
     result in improved performance of code that uses the `COMPLEX'
     data type.

   * The `-malign-double' option now reliably aligns _all_
     double-precision variables and arrays on Intel x86 targets.

   * Even without the `-malign-double' option, `g77' reliably aligns
     local double-precision variables that are not in `EQUIVALENCE'
     areas and not `SAVE''d.

   * `g77' now open-codes ("inlines") division of `COMPLEX' operands
     instead of generating a run-time call to the `libf2c' routines
     `c_div' or `z_div', unless the `-Os' option is specified.

   * `g77' no longer generates code to maintain `errno', a C-language
     concept, when performing operations such as the `SqRt' intrinsic.

   * `g77' developers can temporarily use the `-fflatten-arrays' option
     to compare how the compiler handles code generation using C-like
     constructs as compared to the Fortran-like method constructs
     normally used.

   * A substantial portion of the `g77' front end's code-generation
     component was rewritten.  It now generates code using facilities
     more robustly supported by the `gcc' back end.  One effect of this
     rewrite is that some codes no longer produce a spurious "label LAB
     used before containing binding contour" message.

   * Support for the `-fugly' option has been removed.

   * Improve documentation and indexing, including information on Year
     2000 (Y2K) compliance, and providing more information on internals
     of the front end.

   * Upgrade to `libf2c' as of 1999-05-10.

In 0.5.24 versus 0.5.23:
========================

   There is no `g77' version 0.5.24 at this time, or planned.  0.5.24
is the version number designated for bug fixes and, perhaps, some new
features added, to 0.5.23.  Version 0.5.23 requires `gcc' 2.8.1, as
0.5.24 was planned to require.

   Due to `EGCS' becoming `GCC' (which is now an acronym for "GNU
Compiler Collection"), and `EGCS' 1.2 becoming officially designated
`GCC' 2.95, there seems to be no need for an actual 0.5.24 release.

   To reduce the confusion already resulting from use of 0.5.24 to
designate `g77' versions within `EGCS' versions 1.0 and 1.1, as well as
in versions of `g77' documentation and notices during that period,
"mainline" `g77' version numbering resumes at 0.5.25 with `GCC' 2.95
(`EGCS' 1.2), skipping over 0.5.24 as a placeholder version number.

   To repeat, there is no `g77' 0.5.24, but there is now a 0.5.25.
Please remain calm and return to your keypunch units.

In `EGCS' 1.1.2 versus `EGCS' 1.1.1:
====================================

   * Fix the `IDate' intrinsic (VXT) (in `libg2c') so the returned year
     is in the documented, non-Y2K-compliant range of 0-99, instead of
     being returned as 100 in the year 2000.

     *Note IDate Intrinsic (VXT)::, for more information.

   * Fix the `Date_and_Time' intrinsic (in `libg2c') to return the
     milliseconds value properly in VALUES(8).

   * Fix the `LStat' intrinsic (in `libg2c') to return device-ID
     information properly in SARRAY(7).

   * Improve documentation.

In `EGCS' 1.1.1 versus `EGCS' 1.1:
==================================

   * Fix `libg2c' so it performs an implicit `ENDFILE' operation (as
     appropriate) whenever a `REWIND' is done.

     (This bug was introduced in 0.5.23 and `egcs' 1.1 in `g77''s
     version of `libf2c'.)

   * Fix `libg2c' so it no longer crashes with a spurious diagnostic
     upon doing any I/O following a direct formatted write.

     (This bug was introduced in 0.5.23 and `egcs' 1.1 in `g77''s
     version of `libf2c'.)

   * Fix `g77' so it no longer crashes compiling references to the
     `Rand' intrinsic on some systems.

   * Fix `g77' portion of installation process so it works better on
     some systems (those with shells requiring `else true' clauses on
     `if' constructs for the completion code to be set properly).

In `EGCS' 1.1 versus `EGCS' 1.0.3:
==================================

   * Fix bugs in the `libU77' intrinsic `HostNm' that wrote one byte
     beyond the end of its `CHARACTER' argument, and in the `libU77'
     intrinsics `GMTime' and `LTime' that overwrote their arguments.

   * Assumed arrays with negative bounds (such as `REAL A(-1:*)') no
     longer elicit spurious diagnostics from `g77', even on systems
     with pointers having different sizes than integers.

     This bug is not known to have existed in any recent version of
     `gcc'.  It was introduced in an early release of `egcs'.

   * Valid combinations of `EXTERNAL', passing that external as a dummy
     argument without explicitly giving it a type, and, in a subsequent
     program unit, referencing that external as an external function
     with a different type no longer crash `g77'.

   * `CASE DEFAULT' no longer crashes `g77'.

   * The `-Wunused' option no longer issues a spurious warning about
     the "master" procedure generated by `g77' for procedures
     containing `ENTRY' statements.

   * Support `FORMAT(I<EXPR>)' when EXPR is a compile-time constant
     `INTEGER' expression.

   * Fix `g77' `-g' option so procedures that use `ENTRY' can be
     stepped through, line by line, in `gdb'.

   * Allow any `REAL' argument to intrinsics `Second' and `CPU_Time'.

   * Use `tempnam', if available, to open scratch files (as in
     `OPEN(STATUS='SCRATCH')') so that the `TMPDIR' environment
     variable, if present, is used.

   * `g77''s version of `libf2c' separates out the setting of global
     state (such as command-line arguments and signal handling) from
     `main.o' into distinct, new library archive members.

     This should make it easier to write portable applications that
     have their own (non-Fortran) `main()' routine properly set up the
     `libf2c' environment, even when `libf2c' (now `libg2c') is a
     shared library.

   * `g77' no longer installs the `f77' command and `f77.1' man page in
     the `/usr' or `/usr/local' heirarchy, even if the `f77-install-ok'
     file exists in the source or build directory.  See the
     installation documentation for more information.

   * `g77' no longer installs the `libf2c.a' library and `f2c.h'
     include file in the `/usr' or `/usr/local' heirarchy, even if the
     `f2c-install-ok' or `f2c-exists-ok' files exist in the source or
     build directory.  See the installation documentation for more
     information.

   * The `libf2c.a' library produced by `g77' has been renamed to
     `libg2c.a'.  It is installed only in the `gcc' "private" directory
     heirarchy, `gcc-lib'.  This allows system administrators and users
     to choose which version of the `libf2c' library from `netlib' they
     wish to use on a case-by-case basis.  See the installation
     documentation for more information.

   * The `f2c.h' include (header) file produced by `g77' has been
     renamed to `g2c.h'.  It is installed only in the `gcc' "private"
     directory heirarchy, `gcc-lib'.  This allows system administrators
     and users to choose which version of the include file from
     `netlib' they wish to use on a case-by-case basis.  See the
     installation documentation for more information.

   * The `g77' command now expects the run-time library to be named
     `libg2c.a' instead of `libf2c.a', to ensure that a version other
     than the one built and installed as part of the same `g77' version
     is picked up.

   * During the configuration and build process, `g77' creates
     subdirectories it needs only as it needs them.  Other cleaning up
     of the configuration and build process has been performed as well.

   * `install-info' now used to update the directory of Info
     documentation to contain an entry for `g77' (during installation).

   * Some diagnostics have been changed from warnings to errors, to
     prevent inadvertent use of the resulting, probably buggy, programs.
     These mostly include diagnostics about use of unsupported features
     in the `OPEN', `INQUIRE', `READ', and `WRITE' statements, and
     about truncations of various sorts of constants.

   * Improve compilation of `FORMAT' expressions so that a null byte is
     appended to the last operand if it is a constant.  This provides a
     cleaner run-time diagnostic as provided by `libf2c' for statements
     like `PRINT '(I1', 42'.

   * Improve documentation and indexing.

   * The upgrade to `libf2c' as of 1998-06-18 should fix a variety of
     problems, including those involving some uses of the `T' format
     specifier, and perhaps some build (porting) problems as well.

In `EGCS' 1.1 versus `g77' 0.5.23:
==================================

   * Fix a code-generation bug that afflicted Intel x86 targets when
     `-O2' was specified compiling, for example, an old version of the
     `DNRM2' routine.

     The x87 coprocessor stack was being mismanaged in cases involving
     assigned `GOTO' and `ASSIGN'.

   * `g77' no longer produces incorrect code and initial values for
     `EQUIVALENCE' and `COMMON' aggregates that, due to "unnatural"
     ordering of members vis-a-vis their types, require initial padding.

   * Fix `g77' crash compiling code containing the construct
     `CMPLX(0.)' or similar.

   * `g77' no longer crashes when compiling code containing
     specification statements such as `INTEGER(KIND=7) PTR'.

   * `g77' no longer crashes when compiling code such as `J = SIGNAL(1,
     2)'.

   * `g77' now treats `%LOC(EXPR)' and `LOC(EXPR)' as "ordinary"
     expressions when they are used as arguments in procedure calls.
     This change applies only to global (filewide) analysis, making it
     consistent with how `g77' actually generates code for these cases.

     Previously, `g77' treated these expressions as denoting special
     "pointer" arguments for the purposes of filewide analysis.

   * Fix `g77' crash (or apparently infinite run-time) when compiling
     certain complicated expressions involving `COMPLEX' arithmetic
     (especially multiplication).

   * Align static double-precision variables and arrays on Intel x86
     targets regardless of whether `-malign-double' is specified.

     Generally, this affects only local variables and arrays having the
     `SAVE' attribute or given initial values via `DATA'.

   * The `g77' driver now ensures that `-lg2c' is specified in the link
     phase prior to any occurrence of `-lm'.  This prevents
     accidentally linking to a routine in the SunOS4 `-lm' library when
     the generated code wants to link to the one in `libf2c' (`libg2c').

   * `g77' emits more debugging information when `-g' is used.

     This new information allows, for example, `which __g77_length_a'
     to be used in `gdb' to determine the type of the phantom length
     argument supplied with `CHARACTER' variables.

     This information pertains to internally-generated type, variable,
     and other information, not to the longstanding deficiencies
     vis-a-vis `COMMON' and `EQUIVALENCE'.

   * The F90 `Date_and_Time' intrinsic now is supported.

   * The F90 `System_Clock' intrinsic allows the optional arguments
     (except for the `Count' argument) to be omitted.

   * Upgrade to `libf2c' as of 1998-06-18.

   * Improve documentation and indexing.

In 0.5.23 versus 0.5.22:
========================

   * This release contains several regressions against version 0.5.22
     of `g77', due to using the "vanilla" `gcc' back end instead of
     patching it to fix a few bugs and improve performance in a few
     cases.

     Features that have been dropped from this version of `g77' due to
     their being implemented via `g77'-specific patches to the `gcc'
     back end in previous releases include:

        - Support for `__restrict__' keyword, the options
          `-fargument-alias', `-fargument-noalias', and
          `-fargument-noalias-global', and the corresponding
          alias-analysis code.

          (`egcs' has the alias-analysis code, but not the
          `__restrict__' keyword.  `egcs' `g77' users benefit from the
          alias-analysis code despite the lack of the `__restrict__'
          keyword, which is a C-language construct.)

        - Support for the GNU compiler options `-fmove-all-movables',
          `-freduce-all-givs', and `-frerun-loop-opt'.

          (`egcs' supports these options.  `g77' users of `egcs'
          benefit from them even if they are not explicitly specified,
          because the defaults are optimized for `g77' users.)

        - Support for the `-W' option warning about integer division by
          zero.

        - The Intel x86-specific option `-malign-double' applying to
          stack-allocated data as well as statically-allocate data.

     Note that the `gcc/f/gbe/' subdirectory has been removed from this
     distribution as a result of `g77' no longer including patches for
     the `gcc' back end.

   * Fix bugs in the `libU77' intrinsic `HostNm' that wrote one byte
     beyond the end of its `CHARACTER' argument, and in the `libU77'
     intrinsics `GMTime' and `LTime' that overwrote their arguments.

   * Support `gcc' version 2.8, and remove support for prior versions
     of `gcc'.

   * Remove support for the `--driver' option, as `g77' now does all
     the driving, just like `gcc'.

   * `CASE DEFAULT' no longer crashes `g77'.

   * Valid combinations of `EXTERNAL', passing that external as a dummy
     argument without explicitly giving it a type, and, in a subsequent
     program unit, referencing that external as an external function
     with a different type no longer crash `g77'.

   * `g77' no longer installs the `f77' command and `f77.1' man page in
     the `/usr' or `/usr/local' heirarchy, even if the `f77-install-ok'
     file exists in the source or build directory.  See the
     installation documentation for more information.

   * `g77' no longer installs the `libf2c.a' library and `f2c.h'
     include file in the `/usr' or `/usr/local' heirarchy, even if the
     `f2c-install-ok' or `f2c-exists-ok' files exist in the source or
     build directory.  See the installation documentation for more
     information.

   * The `libf2c.a' library produced by `g77' has been renamed to
     `libg2c.a'.  It is installed only in the `gcc' "private" directory
     heirarchy, `gcc-lib'.  This allows system administrators and users
     to choose which version of the `libf2c' library from `netlib' they
     wish to use on a case-by-case basis.  See the installation
     documentation for more information.

   * The `f2c.h' include (header) file produced by `g77' has been
     renamed to `g2c.h'.  It is installed only in the `gcc' "private"
     directory heirarchy, `gcc-lib'.  This allows system administrators
     and users to choose which version of the include file from
     `netlib' they wish to use on a case-by-case basis.  See the
     installation documentation for more information.

   * The `g77' command now expects the run-time library to be named
     `libg2c.a' instead of `libf2c.a', to ensure that a version other
     than the one built and installed as part of the same `g77' version
     is picked up.

   * The `-Wunused' option no longer issues a spurious warning about
     the "master" procedure generated by `g77' for procedures
     containing `ENTRY' statements.

   * `g77''s version of `libf2c' separates out the setting of global
     state (such as command-line arguments and signal handling) from
     `main.o' into distinct, new library archive members.

     This should make it easier to write portable applications that
     have their own (non-Fortran) `main()' routine properly set up the
     `libf2c' environment, even when `libf2c' (now `libg2c') is a
     shared library.

   * During the configuration and build process, `g77' creates
     subdirectories it needs only as it needs them, thus avoiding
     unnecessary creation of, for example, `stage1/f/runtime' when
     doing a non-bootstrap build.  Other cleaning up of the
     configuration and build process has been performed as well.

   * `install-info' now used to update the directory of Info
     documentation to contain an entry for `g77' (during installation).

   * Some diagnostics have been changed from warnings to errors, to
     prevent inadvertent use of the resulting, probably buggy, programs.
     These mostly include diagnostics about use of unsupported features
     in the `OPEN', `INQUIRE', `READ', and `WRITE' statements, and
     about truncations of various sorts of constants.

   * Improve documentation and indexing.

   * Upgrade to `libf2c' as of 1998-04-20.

     This should fix a variety of problems, including those involving
     some uses of the `T' format specifier, and perhaps some build
     (porting) problems as well.

In 0.5.22 versus 0.5.21:
========================

   * Fix code generation for iterative `DO' loops that have one or more
     references to the iteration variable, or to aliases of it, in
     their control expressions.  For example, `DO 10 J=2,J' now is
     compiled correctly.

   * Fix a code-generation bug that afflicted Intel x86 targets when
     `-O2' was specified compiling, for example, an old version of the
     `DNRM2' routine.

     The x87 coprocessor stack was being mismanaged in cases involving
     assigned `GOTO' and `ASSIGN'.

   * Fix `DTime' intrinsic so as not to truncate results to integer
     values (on some systems).

   * Fix `Signal' intrinsic so it offers portable support for 64-bit
     systems (such as Digital Alphas running GNU/Linux).

   * Fix run-time crash involving `NAMELIST' on 64-bit machines such as
     Alphas.

   * Fix `g77' version of `libf2c' so it no longer produces a spurious
     `I/O recursion' diagnostic at run time when an I/O operation (such
     as `READ *,I') is interrupted in a manner that causes the program
     to be terminated via the `f_exit' routine (such as via `C-c').

   * Fix `g77' crash triggered by `CASE' statement with an omitted
     lower or upper bound.

   * Fix `g77' crash compiling references to `CPU_Time' intrinsic.

   * Fix `g77' crash (or apparently infinite run-time) when compiling
     certain complicated expressions involving `COMPLEX' arithmetic
     (especially multiplication).

   * Fix `g77' crash on statements such as `PRINT *,
     (REAL(Z(I)),I=1,2)', where `Z' is `DOUBLE COMPLEX'.

   * Fix a `g++' crash.

   * Support `FORMAT(I<EXPR>)' when EXPR is a compile-time constant
     `INTEGER' expression.

   * Fix `g77' `-g' option so procedures that use `ENTRY' can be
     stepped through, line by line, in `gdb'.

   * Fix a profiling-related bug in `gcc' back end for Intel x86
     architecture.

   * Allow any `REAL' argument to intrinsics `Second' and `CPU_Time'.

   * Allow any numeric argument to intrinsics `Int2' and `Int8'.

   * Use `tempnam', if available, to open scratch files (as in
     `OPEN(STATUS='SCRATCH')') so that the `TMPDIR' environment
     variable, if present, is used.

   * Rename the `gcc' keyword `restrict' to `__restrict__', to avoid
     rejecting valid, existing, C programs.  Support for `restrict' is
     now more like support for `complex'.

   * Fix `-fpedantic' to not reject procedure invocations such as
     `I=J()' and `CALL FOO()'.

   * Fix `-fugly-comma' to affect invocations of only external
     procedures.  Restore rejection of gratuitous trailing omitted
     arguments to intrinsics, as in `I=MAX(3,4,,)'.

   * Fix compiler so it accepts `-fgnu-intrinsics-*' and
     `-fbadu77-intrinsics-*' options.

   * Improve diagnostic messages from `libf2c' so it is more likely
     that the printing of the active format string is limited to the
     string, with no trailing garbage being printed.

     (Unlike `f2c', `g77' did not append a null byte to its compiled
     form of every format string specified via a `FORMAT' statement.
     However, `f2c' would exhibit the problem anyway for a statement
     like `PRINT '(I)garbage', 1' by printing `(I)garbage' as the
     format string.)

   * Improve compilation of `FORMAT' expressions so that a null byte is
     appended to the last operand if it is a constant.  This provides a
     cleaner run-time diagnostic as provided by `libf2c' for statements
     like `PRINT '(I1', 42'.

   * Fix various crashes involving code with diagnosed errors.

   * Fix cross-compilation bug when configuring `libf2c'.

   * Improve diagnostics.

   * Improve documentation and indexing.

   * Upgrade to `libf2c' as of 1997-09-23.  This fixes a formatted-I/O
     bug that afflicted 64-bit systems with 32-bit integers (such as
     Digital Alpha running GNU/Linux).

In `EGCS' 1.0.2 versus `EGCS' 1.0.1:
====================================

   * Fix `g77' crash triggered by `CASE' statement with an omitted
     lower or upper bound.

   * Fix `g77' crash on statements such as `PRINT *,
     (REAL(Z(I)),I=1,2)', where `Z' is `DOUBLE COMPLEX'.

   * Fix `-fPIC' (such as compiling for ELF targets) on the Intel x86
     architecture target so invalid assembler code is no longer
     produced.

   * Fix `-fpedantic' to not reject procedure invocations such as
     `I=J()' and `CALL FOO()'.

   * Fix `-fugly-comma' to affect invocations of only external
     procedures.  Restore rejection of gratuitous trailing omitted
     arguments to intrinsics, as in `I=MAX(3,4,,)'.

   * Fix compiler so it accepts `-fgnu-intrinsics-*' and
     `-fbadu77-intrinsics-*' options.

In `EGCS' 1.0.1 versus `EGCS' 1.0:
==================================

   * Fix run-time crash involving `NAMELIST' on 64-bit machines such as
     Alphas.

In `EGCS' 1.0 versus `g77' 0.5.21:
==================================

   * Version 1.0 of `egcs' contains several regressions against version
     0.5.21 of `g77', due to using the "vanilla" `gcc' back end instead
     of patching it to fix a few bugs and improve performance in a few
     cases.

     Features that have been dropped from this version of `g77' due to
     their being implemented via `g77'-specific patches to the `gcc'
     back end in previous releases include:

        - Support for the C-language `restrict' keyword.

        - Support for the `-W' option warning about integer division by
          zero.

        - The Intel x86-specific option `-malign-double' applying to
          stack-allocated data as well as statically-allocate data.

     Note that the `gcc/f/gbe/' subdirectory has been removed from this
     distribution as a result of `g77' being fully integrated with the
     `egcs' variant of the `gcc' back end.

   * Fix code generation for iterative `DO' loops that have one or more
     references to the iteration variable, or to aliases of it, in
     their control expressions.  For example, `DO 10 J=2,J' now is
     compiled correctly.

   * Fix `DTime' intrinsic so as not to truncate results to integer
     values (on some systems).

   * Some Fortran code, miscompiled by `g77' built on `gcc' version
     2.8.1 on m68k-next-nextstep3 configurations when using the `-O2'
     option, is now compiled correctly.  It is believed that a C
     function known to miscompile on that configuration when using the
     `-O2 -funroll-loops' options also is now compiled correctly.

   * Remove support for non-`egcs' versions of `gcc'.

   * Remove support for the `--driver' option, as `g77' now does all
     the driving, just like `gcc'.

   * Allow any numeric argument to intrinsics `Int2' and `Int8'.

   * Improve diagnostic messages from `libf2c' so it is more likely
     that the printing of the active format string is limited to the
     string, with no trailing garbage being printed.

     (Unlike `f2c', `g77' did not append a null byte to its compiled
     form of every format string specified via a `FORMAT' statement.
     However, `f2c' would exhibit the problem anyway for a statement
     like `PRINT '(I)garbage', 1' by printing `(I)garbage' as the
     format string.)

   * Upgrade to `libf2c' as of 1997-09-23.  This fixes a formatted-I/O
     bug that afflicted 64-bit systems with 32-bit integers (such as
     Digital Alpha running GNU/Linux).

In 0.5.21:
==========

   * Fix a code-generation bug introduced by 0.5.20 caused by loop
     unrolling (by specifying `-funroll-loops' or similar).  This bug
     afflicted all code compiled by version 2.7.2.2.f.2 of `gcc' (C,
     C++, Fortran, and so on).

   * Fix a code-generation bug manifested when combining local
     `EQUIVALENCE' with a `DATA' statement that follows the first
     executable statement (or is treated as an executable-context
     statement as a result of using the `-fpedantic' option).

   * Fix a compiler crash that occured when an integer division by a
     constant zero is detected.  Instead, when the `-W' option is
     specified, the `gcc' back end issues a warning about such a case.
     This bug afflicted all code compiled by version 2.7.2.2.f.2 of
     `gcc' (C, C++, Fortran, and so on).

   * Fix a compiler crash that occurred in some cases of procedure
     inlining.  (Such cases became more frequent in 0.5.20.)

   * Fix a compiler crash resulting from using `DATA' or similar to
     initialize a `COMPLEX' variable or array to zero.

   * Fix compiler crashes involving use of `AND', `OR', or `XOR'
     intrinsics.

   * Fix compiler bug triggered when using a `COMMON' or `EQUIVALENCE'
     variable as the target of an `ASSIGN' or assigned-`GOTO' statement.

   * Fix compiler crashes due to using the name of a some non-standard
     intrinsics (such as `FTell' or `FPutC') as such and as the name of
     a procedure or common block.  Such dual use of a name in a program
     is allowed by the standard.

   * Place automatic arrays on the stack, even if `SAVE' or the
     `-fno-automatic' option is in effect.  This avoids a compiler
     crash in some cases.

   * The `-malign-double' option now reliably aligns `DOUBLE PRECISION'
     optimally on Pentium and Pentium Pro architectures (586 and 686 in
     `gcc').

   * New option `-Wno-globals' disables warnings about "suspicious" use
     of a name both as a global name and as the implicit name of an
     intrinsic, and warnings about disagreements over the number or
     natures of arguments passed to global procedures, or the natures
     of the procedures themselves.

     The default is to issue such warnings, which are new as of this
     version of `g77'.

   * New option `-fno-globals' disables diagnostics about potentially
     fatal disagreements analysis problems, such as disagreements over
     the number or natures of arguments passed to global procedures, or
     the natures of those procedures themselves.

     The default is to issue such diagnostics and flag the compilation
     as unsuccessful.  With this option, the diagnostics are issued as
     warnings, or, if `-Wno-globals' is specified, are not issued at
     all.

     This option also disables inlining of global procedures, to avoid
     compiler crashes resulting from coding errors that these
     diagnostics normally would identify.

   * Diagnose cases where a reference to a procedure disagrees with the
     type of that procedure, or where disagreements about the number or
     nature of arguments exist.  This avoids a compiler crash.

   * Fix parsing bug whereby `g77' rejected a second initialization
     specification immediately following the first's closing `/' without
     an intervening comma in a `DATA' statement, and the second
     specification was an implied-DO list.

   * Improve performance of the `gcc' back end so certain complicated
     expressions involving `COMPLEX' arithmetic (especially
     multiplication) don't appear to take forever to compile.

   * Fix a couple of profiling-related bugs in `gcc' back end.

   * Integrate GNU Ada's (GNAT's) changes to the back end, which
     consist almost entirely of bug fixes.  These fixes are circa
     version 3.10p of GNAT.

   * Include some other `gcc' fixes that seem useful in `g77''s version
     of `gcc'.  (See `gcc/ChangeLog' for details--compare it to that
     file in the vanilla `gcc-2.7.2.3.tar.gz' distribution.)

   * Fix `libU77' routines that accept file and other names to strip
     trailing blanks from them, for consistency with other
     implementations.  Blanks may be forcibly appended to such names by
     appending a single null character (`CHAR(0)') to the significant
     trailing blanks.

   * Fix `CHMOD' intrinsic to work with file names that have embedded
     blanks, commas, and so on.

   * Fix `SIGNAL' intrinsic so it accepts an optional third `Status'
     argument.

   * Fix `IDATE()' intrinsic subroutine (VXT form) so it accepts
     arguments in the correct order.  Documentation fixed accordingly,
     and for `GMTIME()' and `LTIME()' as well.

   * Make many changes to `libU77' intrinsics to support existing code
     more directly.

     Such changes include allowing both subroutine and function forms
     of many routines, changing `MCLOCK()' and `TIME()' to return
     `INTEGER(KIND=1)' values, introducing `MCLOCK8()' and `TIME8()' to
     return `INTEGER(KIND=2)' values, and placing functions that are
     intended to perform side effects in a new intrinsic group,
     `badu77'.

   * Improve `libU77' so it is more portable.

   * Add options `-fbadu77-intrinsics-delete',
     `-fbadu77-intrinsics-hide', and so on.

   * Fix crashes involving diagnosed or invalid code.

   * `g77' and `gcc' now do a somewhat better job detecting and
     diagnosing arrays that are too large to handle before these cause
     diagnostics during the assembler or linker phase, a compiler
     crash, or generation of incorrect code.

   * Make some fixes to alias analysis code.

   * Add support for `restrict' keyword in `gcc' front end.

   * Support `gcc' version 2.7.2.3 (modified by `g77' into version
     2.7.2.3.f.1), and remove support for prior versions of `gcc'.

   * Incorporate GNAT's patches to the `gcc' back end into `g77''s, so
     GNAT users do not need to apply GNAT's patches to build both GNAT
     and `g77' from the same source tree.

   * Modify `make' rules and related code so that generation of Info
     documentation doesn't require compilation using `gcc'.  Now, any
     ANSI C compiler should be adequate to produce the `g77'
     documentation (in particular, the tables of intrinsics) from
     scratch.

   * Add `INT2' and `INT8' intrinsics.

   * Add `CPU_TIME' intrinsic.

   * Add `ALARM' intrinsic.

   * `CTIME' intrinsic now accepts any `INTEGER' argument, not just
     `INTEGER(KIND=2)'.

   * Warn when explicit type declaration disagrees with the type of an
     intrinsic invocation.

   * Support `*f771' entry in `gcc' `specs' file.

   * Fix typo in `make' rule `g77-cross', used only for cross-compiling.

   * Fix `libf2c' build procedure to re-archive library if previous
     attempt to archive was interrupted.

   * Change `gcc' to unroll loops only during the last invocation (of
     as many as two invocations) of loop optimization.

   * Improve handling of `-fno-f2c' so that code that attempts to pass
     an intrinsic as an actual argument, such as `CALL FOO(ABS)', is
     rejected due to the fact that the run-time-library routine is,
     effectively, compiled with `-ff2c' in effect.

   * Fix `g77' driver to recognize `-fsyntax-only' as an option that
     inhibits linking, just like `-c' or `-S', and to recognize and
     properly handle the `-nostdlib', `-M', `-MM', `-nodefaultlibs',
     and `-Xlinker' options.

   * Upgrade to `libf2c' as of 1997-08-16.

   * Modify `libf2c' to consistently and clearly diagnose recursive I/O
     (at run time).

   * `g77' driver now prints version information (such as produced by
     `g77 -v') to `stderr' instead of `stdout'.

   * The `.r' suffix now designates a Ratfor source file, to be
     preprocessed via the `ratfor' command, available separately.

   * Fix some aspects of how `gcc' determines what kind of system is
     being configured and what kinds are supported.  For example, GNU
     Linux/Alpha ELF systems now are directly supported.

   * Improve diagnostics.

   * Improve documentation and indexing.

   * Include all pertinent files for `libf2c' that come from
     `netlib.bell-labs.com'; give any such files that aren't quite
     accurate in `g77''s version of `libf2c' the suffix `.netlib'.

   * Reserve `INTEGER(KIND=0)' for future use.

In 0.5.20:
==========

   * The `-fno-typeless-boz' option is now the default.

     This option specifies that non-decimal-radix constants using the
     prefixed-radix form (such as `Z'1234'') are to be interpreted as
     `INTEGER(KIND=1)' constants.  Specify `-ftypeless-boz' to cause
     such constants to be interpreted as typeless.

     (Version 0.5.19 introduced `-fno-typeless-boz' and its inverse.)

     *Note Options Controlling Fortran Dialect: Fortran Dialect Options,
     for information on the `-ftypeless-boz' option.

   * Options `-ff90-intrinsics-enable' and `-fvxt-intrinsics-enable'
     now are the defaults.

     Some programs might use names that clash with intrinsic names
     defined (and now enabled) by these options or by the new `libU77'
     intrinsics.  Users of such programs might need to compile them
     differently (using, for example, `-ff90-intrinsics-disable') or,
     better yet, insert appropriate `EXTERNAL' statements specifying
     that these names are not intended to be names of intrinsics.

   * The `ALWAYS_FLUSH' macro is no longer defined when building
     `libf2c', which should result in improved I/O performance,
     especially over NFS.

     _Note:_ If you have code that depends on the behavior of `libf2c'
     when built with `ALWAYS_FLUSH' defined, you will have to modify
     `libf2c' accordingly before building it from this and future
     versions of `g77'.

     *Note Output Assumed To Flush::, for more information.

   * Dave Love's implementation of `libU77' has been added to the
     version of `libf2c' distributed with and built as part of `g77'.
     `g77' now knows about the routines in this library as intrinsics.

   * New option `-fvxt' specifies that the source file is written in
     VXT Fortran, instead of GNU Fortran.

     *Note VXT Fortran::, for more information on the constructs
     recognized when the `-fvxt' option is specified.

   * The `-fvxt-not-f90' option has been deleted, along with its
     inverse, `-ff90-not-vxt'.

     If you used one of these deleted options, you should re-read the
     pertinent documentation to determine which options, if any, are
     appropriate for compiling your code with this version of `g77'.

     *Note Other Dialects::, for more information.

   * The `-fugly' option now issues a warning, as it likely will be
     removed in a future version.

     (Enabling all the `-fugly-*' options is unlikely to be feasible,
     or sensible, in the future, so users should learn to specify only
     those `-fugly-*' options they really need for a particular source
     file.)

   * The `-fugly-assumed' option, introduced in version 0.5.19, has
     been changed to better accommodate old and new code.

     *Note Ugly Assumed-Size Arrays::, for more information.

   * Make a number of fixes to the `g77' front end and the `gcc' back
     end to better support Alpha (AXP) machines.  This includes
     providing at least one bug-fix to the `gcc' back end for Alphas.

   * Related to supporting Alpha (AXP) machines, the `LOC()' intrinsic
     and `%LOC()' construct now return values of `INTEGER(KIND=0)' type,
     as defined by the GNU Fortran language.

     This type is wide enough (holds the same number of bits) as the
     character-pointer type on the machine.

     On most machines, this won't make a difference, whereas, on Alphas
     and other systems with 64-bit pointers, the `INTEGER(KIND=0)' type
     is equivalent to `INTEGER(KIND=2)' (often referred to as
     `INTEGER*8') instead of the more common `INTEGER(KIND=1)' (often
     referred to as `INTEGER*4').

   * Emulate `COMPLEX' arithmetic in the `g77' front end, to avoid bugs
     in `complex' support in the `gcc' back end.  New option
     `-fno-emulate-complex' causes `g77' to revert the 0.5.19 behavior.

   * Fix bug whereby `REAL A(1)', for example, caused a compiler crash
     if `-fugly-assumed' was in effect and A was a local (automatic)
     array.  That case is no longer affected by the new handling of
     `-fugly-assumed'.

   * Fix `g77' command driver so that `g77 -o foo.f' no longer deletes
     `foo.f' before issuing other diagnostics, and so the `-x' option
     is properly handled.

   * Enable inlining of subroutines and functions by the `gcc' back end.
     This works as it does for `gcc' itself--program units may be
     inlined for invocations that follow them in the same program unit,
     as long as the appropriate compile-time options are specified.

   * Dummy arguments are no longer assumed to potentially alias
     (overlap) other dummy arguments or `COMMON' areas when any of
     these are defined (assigned to) by Fortran code.

     This can result in faster and/or smaller programs when compiling
     with optimization enabled, though on some systems this effect is
     observed only when `-fforce-addr' also is specified.

     New options `-falias-check', `-fargument-alias',
     `-fargument-noalias', and `-fno-argument-noalias-global' control
     the way `g77' handles potential aliasing.

     *Note Aliasing Assumed To Work::, for detailed information on why
     the new defaults might result in some programs no longer working
     the way they did when compiled by previous versions of `g77'.

   * The `CONJG()' and `DCONJG()' intrinsics now are compiled in-line.

   * The bug-fix for 0.5.19.1 has been re-done.  The `g77' compiler has
     been changed back to assume `libf2c' has no aliasing problems in
     its implementations of the `COMPLEX' (and `DOUBLE COMPLEX')
     intrinsics.  The `libf2c' has been changed to have no such
     problems.

     As a result, 0.5.20 is expected to offer improved performance over
     0.5.19.1, perhaps as good as 0.5.19 in most or all cases, due to
     this change alone.

     _Note:_ This change requires version 0.5.20 of `libf2c', at least,
     when linking code produced by any versions of `g77' other than
     0.5.19.1.  Use `g77 -v' to determine the version numbers of the
     `libF77', `libI77', and `libU77' components of the `libf2c'
     library.  (If these version numbers are not printed--in
     particular, if the linker complains about unresolved references to
     names like `g77__fvers__'--that strongly suggests your
     installation has an obsolete version of `libf2c'.)

   * New option `-fugly-assign' specifies that the same memory
     locations are to be used to hold the values assigned by both
     statements `I = 3' and `ASSIGN 10 TO I', for example.  (Normally,
     `g77' uses a separate memory location to hold assigned statement
     labels.)

     *Note Ugly Assigned Labels::, for more information.

   * `FORMAT' and `ENTRY' statements now are allowed to precede
     `IMPLICIT NONE' statements.

   * Produce diagnostic for unsupported `SELECT CASE' on `CHARACTER'
     type, instead of crashing, at compile time.

   * Fix crashes involving diagnosed or invalid code.

   * Change approach to building `libf2c' archive (`libf2c.a') so that
     members are added to it only when truly necessary, so the user
     that installs an already-built `g77' doesn't need to have write
     access to the build tree (whereas the user doing the build might
     not have access to install new software on the system).

   * Support `gcc' version 2.7.2.2 (modified by `g77' into version
     2.7.2.2.f.2), and remove support for prior versions of `gcc'.

   * Upgrade to `libf2c' as of 1997-02-08, and fix up some of the build
     procedures.

   * Improve general build procedures for `g77', fixing minor bugs
     (such as deletion of any file named `f771' in the parent directory
     of `gcc/').

   * Enable full support of `INTEGER(KIND=2)' (often referred to as
     `INTEGER*8') available in `libf2c' and `f2c.h' so that `f2c' users
     may make full use of its features via the `g77' version of `f2c.h'
     and the `INTEGER(KIND=2)' support routines in the `g77' version of
     `libf2c'.

   * Improve `g77' driver and `libf2c' so that `g77 -v' yields version
     information on the library.

   * The `SNGL' and `FLOAT' intrinsics now are specific intrinsics,
     instead of synonyms for the generic intrinsic `REAL'.

   * New intrinsics have been added.  These are `REALPART', `IMAGPART',
     `COMPLEX', `LONG', and `SHORT'.

   * A new group of intrinsics, `gnu', has been added to contain the
     new `REALPART', `IMAGPART', and `COMPLEX' intrinsics.  An old
     group, `dcp', has been removed.

   * Complain about industry-wide ambiguous references `REAL(EXPR)' and
     `AIMAG(EXPR)', where EXPR is `DOUBLE COMPLEX' (or any complex type
     other than `COMPLEX'), unless `-ff90' option specifies Fortran 90
     interpretation or new `-fugly-complex' option, in conjunction with
     `-fnot-f90', specifies `f2c' interpretation.

   * Make improvements to diagnostics.

   * Speed up compiler a bit.

   * Improvements to documentation and indexing, including a new
     chapter containing information on one, later more, diagnostics
     that users are directed to pull up automatically via a message in
     the diagnostic itself.

     (Hence the menu item `M' for the node `Diagnostics' in the
     top-level menu of the Info documentation.)

In previous versions:
=====================

   Information on previous versions is archived in
`egcs/gcc/f/news.texi' following the test of the `DOC-OLDNEWS' macro.


File: g77,  Node: Changes,  Next: Language,  Prev: News,  Up: Top

9 User-visible Changes
**********************

   This chapter describes changes to `g77' that are visible to the
programmers who actually write and maintain Fortran code they compile
with `g77'.  Information on changes to installation procedures, changes
to the documentation, and bug fixes is not provided here, unless it is
likely to affect how users use `g77'.  *Note News About GNU Fortran:
News, for information on such changes to `g77'.

   Note that two variants of `g77' are tracked below.  The `egcs'
variant is described vis-a-vis previous versions of `egcs' and/or an
official FSF version, as appropriate.

   Therefore, `egcs' versions sometimes have multiple listings to help
clarify how they differ from other versions, though this can make
getting a complete picture of what a particular `egcs' version contains
somewhat more difficult.

   For information on bugs in the GCC-2.95 version of `g77', see *Note
Known Bugs In GNU Fortran: Known Bugs.

   The following information was last updated on 1999-07-08:

In 0.5.25, `GCC' 2.95 (`EGCS' 1.2) versus `EGCS' 1.1.2:
=======================================================

   * The new `-fbounds-check' option causes `g77' to compile run-time
     bounds checks of array subscripts, as well as of substring start
     and end points.

   * `libg2c' now supports building as multilibbed library, which
     provides better support for systems that require options such as
     `-mieee' to work properly.

   * Source file names with the suffixes `.FOR' and `.FPP' now are
     recognized by `g77' as if they ended in `.for' and `.fpp',
     respectively.

   * The order of arguments to the _subroutine_ forms of the `CTime',
     `DTime', `ETime', and `TtyNam' intrinsics has been swapped.  The
     argument serving as the returned value for the corresponding
     function forms now is the _second_ argument, making these
     consistent with the other subroutine forms of `libU77' intrinsics.

   * `g77' now warns about a reference to an intrinsic that has an
     interface that is not Year 2000 (Y2K) compliant.  Also, `libg2c'
     has been changed to increase the likelihood of catching references
     to the implementations of these intrinsics using the `EXTERNAL'
     mechanism (which would avoid the new warnings).

     *Note Year 2000 (Y2K) Problems::, for more information.

   * `-fno-emulate-complex' is now the default option.  This should
     result in improved performance of code that uses the `COMPLEX'
     data type.

   * The `-malign-double' option now reliably aligns _all_
     double-precision variables and arrays on Intel x86 targets.

   * `g77' no longer generates code to maintain `errno', a C-language
     concept, when performing operations such as the `SqRt' intrinsic.

   * Support for the `-fugly' option has been removed.


In 0.5.24 versus 0.5.23:
========================

   There is no `g77' version 0.5.24 at this time, or planned.  0.5.24
is the version number designated for bug fixes and, perhaps, some new
features added, to 0.5.23.  Version 0.5.23 requires `gcc' 2.8.1, as
0.5.24 was planned to require.

   Due to `EGCS' becoming `GCC' (which is now an acronym for "GNU
Compiler Collection"), and `EGCS' 1.2 becoming officially designated
`GCC' 2.95, there seems to be no need for an actual 0.5.24 release.

   To reduce the confusion already resulting from use of 0.5.24 to
designate `g77' versions within `EGCS' versions 1.0 and 1.1, as well as
in versions of `g77' documentation and notices during that period,
"mainline" `g77' version numbering resumes at 0.5.25 with `GCC' 2.95
(`EGCS' 1.2), skipping over 0.5.24 as a placeholder version number.

   To repeat, there is no `g77' 0.5.24, but there is now a 0.5.25.
Please remain calm and return to your keypunch units.

In `EGCS' 1.1.2 versus `EGCS' 1.1.1:
====================================

In `EGCS' 1.1.1 versus `EGCS' 1.1:
==================================

In `EGCS' 1.1 versus `EGCS' 1.0.3:
==================================

   * Support `FORMAT(I<EXPR>)' when EXPR is a compile-time constant
     `INTEGER' expression.

   * Fix `g77' `-g' option so procedures that use `ENTRY' can be
     stepped through, line by line, in `gdb'.

   * Allow any `REAL' argument to intrinsics `Second' and `CPU_Time'.

   * Use `tempnam', if available, to open scratch files (as in
     `OPEN(STATUS='SCRATCH')') so that the `TMPDIR' environment
     variable, if present, is used.

   * `g77''s version of `libf2c' separates out the setting of global
     state (such as command-line arguments and signal handling) from
     `main.o' into distinct, new library archive members.

     This should make it easier to write portable applications that
     have their own (non-Fortran) `main()' routine properly set up the
     `libf2c' environment, even when `libf2c' (now `libg2c') is a
     shared library.

   * The `g77' command now expects the run-time library to be named
     `libg2c.a' instead of `libf2c.a', to ensure that a version other
     than the one built and installed as part of the same `g77' version
     is picked up.

   * Some diagnostics have been changed from warnings to errors, to
     prevent inadvertent use of the resulting, probably buggy, programs.
     These mostly include diagnostics about use of unsupported features
     in the `OPEN', `INQUIRE', `READ', and `WRITE' statements, and
     about truncations of various sorts of constants.


In `EGCS' 1.1 versus `g77' 0.5.23:
==================================

   * `g77' now treats `%LOC(EXPR)' and `LOC(EXPR)' as "ordinary"
     expressions when they are used as arguments in procedure calls.
     This change applies only to global (filewide) analysis, making it
     consistent with how `g77' actually generates code for these cases.

     Previously, `g77' treated these expressions as denoting special
     "pointer" arguments for the purposes of filewide analysis.

   * Align static double-precision variables and arrays on Intel x86
     targets regardless of whether `-malign-double' is specified.

     Generally, this affects only local variables and arrays having the
     `SAVE' attribute or given initial values via `DATA'.

   * The `g77' driver now ensures that `-lg2c' is specified in the link
     phase prior to any occurrence of `-lm'.  This prevents
     accidentally linking to a routine in the SunOS4 `-lm' library when
     the generated code wants to link to the one in `libf2c' (`libg2c').

   * `g77' emits more debugging information when `-g' is used.

     This new information allows, for example, `which __g77_length_a'
     to be used in `gdb' to determine the type of the phantom length
     argument supplied with `CHARACTER' variables.

     This information pertains to internally-generated type, variable,
     and other information, not to the longstanding deficiencies
     vis-a-vis `COMMON' and `EQUIVALENCE'.

   * The F90 `Date_and_Time' intrinsic now is supported.

   * The F90 `System_Clock' intrinsic allows the optional arguments
     (except for the `Count' argument) to be omitted.


In 0.5.23 versus 0.5.22:
========================

   * This release contains several regressions against version 0.5.22
     of `g77', due to using the "vanilla" `gcc' back end instead of
     patching it to fix a few bugs and improve performance in a few
     cases.

     Features that have been dropped from this version of `g77' due to
     their being implemented via `g77'-specific patches to the `gcc'
     back end in previous releases include:

        - Support for `__restrict__' keyword, the options
          `-fargument-alias', `-fargument-noalias', and
          `-fargument-noalias-global', and the corresponding
          alias-analysis code.

          (`egcs' has the alias-analysis code, but not the
          `__restrict__' keyword.  `egcs' `g77' users benefit from the
          alias-analysis code despite the lack of the `__restrict__'
          keyword, which is a C-language construct.)

        - Support for the GNU compiler options `-fmove-all-movables',
          `-freduce-all-givs', and `-frerun-loop-opt'.

          (`egcs' supports these options.  `g77' users of `egcs'
          benefit from them even if they are not explicitly specified,
          because the defaults are optimized for `g77' users.)

        - Support for the `-W' option warning about integer division by
          zero.

        - The Intel x86-specific option `-malign-double' applying to
          stack-allocated data as well as statically-allocate data.

   * Support `gcc' version 2.8, and remove support for prior versions
     of `gcc'.

   * Remove support for the `--driver' option, as `g77' now does all
     the driving, just like `gcc'.

   * The `g77' command now expects the run-time library to be named
     `libg2c.a' instead of `libf2c.a', to ensure that a version other
     than the one built and installed as part of the same `g77' version
     is picked up.

   * `g77''s version of `libf2c' separates out the setting of global
     state (such as command-line arguments and signal handling) from
     `main.o' into distinct, new library archive members.

     This should make it easier to write portable applications that
     have their own (non-Fortran) `main()' routine properly set up the
     `libf2c' environment, even when `libf2c' (now `libg2c') is a
     shared library.

   * Some diagnostics have been changed from warnings to errors, to
     prevent inadvertent use of the resulting, probably buggy, programs.
     These mostly include diagnostics about use of unsupported features
     in the `OPEN', `INQUIRE', `READ', and `WRITE' statements, and
     about truncations of various sorts of constants.


In 0.5.22 versus 0.5.21:
========================

   * Fix `Signal' intrinsic so it offers portable support for 64-bit
     systems (such as Digital Alphas running GNU/Linux).

   * Support `FORMAT(I<EXPR>)' when EXPR is a compile-time constant
     `INTEGER' expression.

   * Fix `g77' `-g' option so procedures that use `ENTRY' can be
     stepped through, line by line, in `gdb'.

   * Allow any `REAL' argument to intrinsics `Second' and `CPU_Time'.

   * Allow any numeric argument to intrinsics `Int2' and `Int8'.

   * Use `tempnam', if available, to open scratch files (as in
     `OPEN(STATUS='SCRATCH')') so that the `TMPDIR' environment
     variable, if present, is used.

   * Rename the `gcc' keyword `restrict' to `__restrict__', to avoid
     rejecting valid, existing, C programs.  Support for `restrict' is
     now more like support for `complex'.

   * Fix `-fugly-comma' to affect invocations of only external
     procedures.  Restore rejection of gratuitous trailing omitted
     arguments to intrinsics, as in `I=MAX(3,4,,)'.

   * Fix compiler so it accepts `-fgnu-intrinsics-*' and
     `-fbadu77-intrinsics-*' options.


In `EGCS' 1.0.2 versus `EGCS' 1.0.1:
====================================

   * Fix compiler so it accepts `-fgnu-intrinsics-*' and
     `-fbadu77-intrinsics-*' options.

In `EGCS' 1.0.1 versus `EGCS' 1.0:
==================================

In `EGCS' 1.0 versus `g77' 0.5.21:
==================================

   * Version 1.0 of `egcs' contains several regressions against version
     0.5.21 of `g77', due to using the "vanilla" `gcc' back end instead
     of patching it to fix a few bugs and improve performance in a few
     cases.

     Features that have been dropped from this version of `g77' due to
     their being implemented via `g77'-specific patches to the `gcc'
     back end in previous releases include:

        - Support for the C-language `restrict' keyword.

        - Support for the `-W' option warning about integer division by
          zero.

        - The Intel x86-specific option `-malign-double' applying to
          stack-allocated data as well as statically-allocate data.

   * Remove support for the `--driver' option, as `g77' now does all
     the driving, just like `gcc'.

   * Allow any numeric argument to intrinsics `Int2' and `Int8'.


In 0.5.21:
==========

   * When the `-W' option is specified, `gcc', `g77', and other GNU
     compilers that incorporate the `gcc' back end as modified by
     `g77', issue a warning about integer division by constant zero.

   * New option `-Wno-globals' disables warnings about "suspicious" use
     of a name both as a global name and as the implicit name of an
     intrinsic, and warnings about disagreements over the number or
     natures of arguments passed to global procedures, or the natures
     of the procedures themselves.

     The default is to issue such warnings, which are new as of this
     version of `g77'.

   * New option `-fno-globals' disables diagnostics about potentially
     fatal disagreements analysis problems, such as disagreements over
     the number or natures of arguments passed to global procedures, or
     the natures of those procedures themselves.

     The default is to issue such diagnostics and flag the compilation
     as unsuccessful.  With this option, the diagnostics are issued as
     warnings, or, if `-Wno-globals' is specified, are not issued at
     all.

     This option also disables inlining of global procedures, to avoid
     compiler crashes resulting from coding errors that these
     diagnostics normally would identify.

   * Fix `libU77' routines that accept file and other names to strip
     trailing blanks from them, for consistency with other
     implementations.  Blanks may be forcibly appended to such names by
     appending a single null character (`CHAR(0)') to the significant
     trailing blanks.

   * Fix `CHMOD' intrinsic to work with file names that have embedded
     blanks, commas, and so on.

   * Fix `SIGNAL' intrinsic so it accepts an optional third `Status'
     argument.

   * Make many changes to `libU77' intrinsics to support existing code
     more directly.

     Such changes include allowing both subroutine and function forms
     of many routines, changing `MCLOCK()' and `TIME()' to return
     `INTEGER(KIND=1)' values, introducing `MCLOCK8()' and `TIME8()' to
     return `INTEGER(KIND=2)' values, and placing functions that are
     intended to perform side effects in a new intrinsic group,
     `badu77'.

   * Add options `-fbadu77-intrinsics-delete',
     `-fbadu77-intrinsics-hide', and so on.

   * Add `INT2' and `INT8' intrinsics.

   * Add `CPU_TIME' intrinsic.

   * Add `ALARM' intrinsic.

   * `CTIME' intrinsic now accepts any `INTEGER' argument, not just
     `INTEGER(KIND=2)'.

   * `g77' driver now prints version information (such as produced by
     `g77 -v') to `stderr' instead of `stdout'.

   * The `.r' suffix now designates a Ratfor source file, to be
     preprocessed via the `ratfor' command, available separately.


In 0.5.20:
==========

   * The `-fno-typeless-boz' option is now the default.

     This option specifies that non-decimal-radix constants using the
     prefixed-radix form (such as `Z'1234'') are to be interpreted as
     `INTEGER(KIND=1)' constants.  Specify `-ftypeless-boz' to cause
     such constants to be interpreted as typeless.

     (Version 0.5.19 introduced `-fno-typeless-boz' and its inverse.)

     *Note Options Controlling Fortran Dialect: Fortran Dialect Options,
     for information on the `-ftypeless-boz' option.

   * Options `-ff90-intrinsics-enable' and `-fvxt-intrinsics-enable'
     now are the defaults.

     Some programs might use names that clash with intrinsic names
     defined (and now enabled) by these options or by the new `libU77'
     intrinsics.  Users of such programs might need to compile them
     differently (using, for example, `-ff90-intrinsics-disable') or,
     better yet, insert appropriate `EXTERNAL' statements specifying
     that these names are not intended to be names of intrinsics.

   * The `ALWAYS_FLUSH' macro is no longer defined when building
     `libf2c', which should result in improved I/O performance,
     especially over NFS.

     _Note:_ If you have code that depends on the behavior of `libf2c'
     when built with `ALWAYS_FLUSH' defined, you will have to modify
     `libf2c' accordingly before building it from this and future
     versions of `g77'.

     *Note Output Assumed To Flush::, for more information.

   * Dave Love's implementation of `libU77' has been added to the
     version of `libf2c' distributed with and built as part of `g77'.
     `g77' now knows about the routines in this library as intrinsics.

   * New option `-fvxt' specifies that the source file is written in
     VXT Fortran, instead of GNU Fortran.

     *Note VXT Fortran::, for more information on the constructs
     recognized when the `-fvxt' option is specified.

   * The `-fvxt-not-f90' option has been deleted, along with its
     inverse, `-ff90-not-vxt'.

     If you used one of these deleted options, you should re-read the
     pertinent documentation to determine which options, if any, are
     appropriate for compiling your code with this version of `g77'.

     *Note Other Dialects::, for more information.

   * The `-fugly' option now issues a warning, as it likely will be
     removed in a future version.

     (Enabling all the `-fugly-*' options is unlikely to be feasible,
     or sensible, in the future, so users should learn to specify only
     those `-fugly-*' options they really need for a particular source
     file.)

   * The `-fugly-assumed' option, introduced in version 0.5.19, has
     been changed to better accommodate old and new code.

     *Note Ugly Assumed-Size Arrays::, for more information.

   * Related to supporting Alpha (AXP) machines, the `LOC()' intrinsic
     and `%LOC()' construct now return values of `INTEGER(KIND=0)' type,
     as defined by the GNU Fortran language.

     This type is wide enough (holds the same number of bits) as the
     character-pointer type on the machine.

     On most machines, this won't make a difference, whereas, on Alphas
     and other systems with 64-bit pointers, the `INTEGER(KIND=0)' type
     is equivalent to `INTEGER(KIND=2)' (often referred to as
     `INTEGER*8') instead of the more common `INTEGER(KIND=1)' (often
     referred to as `INTEGER*4').

   * Emulate `COMPLEX' arithmetic in the `g77' front end, to avoid bugs
     in `complex' support in the `gcc' back end.  New option
     `-fno-emulate-complex' causes `g77' to revert the 0.5.19 behavior.

   * Dummy arguments are no longer assumed to potentially alias
     (overlap) other dummy arguments or `COMMON' areas when any of
     these are defined (assigned to) by Fortran code.

     This can result in faster and/or smaller programs when compiling
     with optimization enabled, though on some systems this effect is
     observed only when `-fforce-addr' also is specified.

     New options `-falias-check', `-fargument-alias',
     `-fargument-noalias', and `-fno-argument-noalias-global' control
     the way `g77' handles potential aliasing.

     *Note Aliasing Assumed To Work::, for detailed information on why
     the new defaults might result in some programs no longer working
     the way they did when compiled by previous versions of `g77'.

   * New option `-fugly-assign' specifies that the same memory
     locations are to be used to hold the values assigned by both
     statements `I = 3' and `ASSIGN 10 TO I', for example.  (Normally,
     `g77' uses a separate memory location to hold assigned statement
     labels.)

     *Note Ugly Assigned Labels::, for more information.

   * `FORMAT' and `ENTRY' statements now are allowed to precede
     `IMPLICIT NONE' statements.

   * Enable full support of `INTEGER(KIND=2)' (often referred to as
     `INTEGER*8') available in `libf2c' and `f2c.h' so that `f2c' users
     may make full use of its features via the `g77' version of `f2c.h'
     and the `INTEGER(KIND=2)' support routines in the `g77' version of
     `libf2c'.

   * Improve `g77' driver and `libf2c' so that `g77 -v' yields version
     information on the library.

   * The `SNGL' and `FLOAT' intrinsics now are specific intrinsics,
     instead of synonyms for the generic intrinsic `REAL'.

   * New intrinsics have been added.  These are `REALPART', `IMAGPART',
     `COMPLEX', `LONG', and `SHORT'.

   * A new group of intrinsics, `gnu', has been added to contain the
     new `REALPART', `IMAGPART', and `COMPLEX' intrinsics.  An old
     group, `dcp', has been removed.

   * Complain about industry-wide ambiguous references `REAL(EXPR)' and
     `AIMAG(EXPR)', where EXPR is `DOUBLE COMPLEX' (or any complex type
     other than `COMPLEX'), unless `-ff90' option specifies Fortran 90
     interpretation or new `-fugly-complex' option, in conjunction with
     `-fnot-f90', specifies `f2c' interpretation.


In previous versions:
=====================

   Information on previous versions is archived in
`egcs/gcc/f/news.texi' following the test of the `DOC-OLDNEWS' macro.


File: g77,  Node: Language,  Next: Compiler,  Prev: Changes,  Up: Top

10 The GNU Fortran Language
***************************

   GNU Fortran supports a variety of extensions to, and dialects of,
the Fortran language.  Its primary base is the ANSI FORTRAN 77
standard, currently available on the network at
`http://www.fortran.com/fortran/F77_std/rjcnf0001.html' or as
monolithic text at
`http://www.fortran.com/fortran/F77_std/f77_std.html'.  It offers some
extensions that are popular among users of UNIX `f77' and `f2c'
compilers, some that are popular among users of other compilers (such
as Digital products), some that are popular among users of the newer
Fortran 90 standard, and some that are introduced by GNU Fortran.

   (If you need a text on Fortran, a few freely available electronic
references have pointers from `http://www.fortran.com/fortran/Books/'.
There is a `cooperative net project', `User Notes on Fortran
Programming' at `ftp://vms.huji.ac.il/fortran/' and mirrors elsewhere;
some of this material might not apply specifically to `g77'.)

   Part of what defines a particular implementation of a Fortran
system, such as `g77', is the particular characteristics of how it
supports types, constants, and so on.  Much of this is left up to the
implementation by the various Fortran standards and accepted practice
in the industry.

   The GNU Fortran _language_ is described below.  Much of the material
is organized along the same lines as the ANSI FORTRAN 77 standard
itself.

   *Note Other Dialects::, for information on features `g77' supports
that are not part of the GNU Fortran language.

   _Note_: This portion of the documentation definitely needs a lot of
work!

* Menu:

Relationship to the ANSI FORTRAN 77 standard:
* Direction of Language Development::  Where GNU Fortran is headed.
* Standard Support::  Degree of support for the standard.

Extensions to the ANSI FORTRAN 77 standard:
* Conformance::
* Notation Used::
* Terms and Concepts::
* Characters Lines Sequence::
* Data Types and Constants::
* Expressions::
* Specification Statements::
* Control Statements::
* Functions and Subroutines::
* Scope and Classes of Names::
* I/O::
* Fortran 90 Features::


File: g77,  Node: Direction of Language Development,  Next: Standard Support,  Up: Language

10.1 Direction of Language Development
======================================

   The purpose of the following description of the GNU Fortran language
is to promote wide portability of GNU Fortran programs.

   GNU Fortran is an evolving language, due to the fact that `g77'
itself is in beta test.  Some current features of the language might
later be redefined as dialects of Fortran supported by `g77' when
better ways to express these features are added to `g77', for example.
Such features would still be supported by `g77', but would be available
only when one or more command-line options were used.

   The GNU Fortran _language_ is distinct from the GNU Fortran
_compilation system_ (`g77').

   For example, `g77' supports various dialects of Fortran--in a sense,
these are languages other than GNU Fortran--though its primary purpose
is to support the GNU Fortran language, which also is described in its
documentation and by its implementation.

   On the other hand, non-GNU compilers might offer support for the GNU
Fortran language, and are encouraged to do so.

   Currently, the GNU Fortran language is a fairly fuzzy object.  It
represents something of a cross between what `g77' accepts when
compiling using the prevailing defaults and what this document
describes as being part of the language.

   Future versions of `g77' are expected to clarify the definition of
the language in the documentation.  Often, this will mean adding new
features to the language, in the form of both new documentation and new
support in `g77'.  However, it might occasionally mean removing a
feature from the language itself to "dialect" status.  In such a case,
the documentation would be adjusted to reflect the change, and `g77'
itself would likely be changed to require one or more command-line
options to continue supporting the feature.

   The development of the GNU Fortran language is intended to strike a
balance between:

   * Serving as a mostly-upwards-compatible language from the de facto
     UNIX Fortran dialect as supported by `f77'.

   * Offering new, well-designed language features.  Attributes of such
     features include not making existing code any harder to read (for
     those who might be unaware that the new features are not in use)
     and not making state-of-the-art compilers take longer to issue
     diagnostics, among others.

   * Supporting existing, well-written code without gratuitously
     rejecting non-standard constructs, regardless of the origin of the
     code (its dialect).

   * Offering default behavior and command-line options to reduce and,
     where reasonable, eliminate the need for programmers to make any
     modifications to code that already works in existing production
     environments.

   * Diagnosing constructs that have different meanings in different
     systems, languages, and dialects, while offering clear, less
     ambiguous ways to express each of the different meanings so
     programmers can change their code appropriately.

   One of the biggest practical challenges for the developers of the
GNU Fortran language is meeting the sometimes contradictory demands of
the above items.

   For example, a feature might be widely used in one popular
environment, but the exact same code that utilizes that feature might
not work as expected--perhaps it might mean something entirely
different--in another popular environment.

   Traditionally, Fortran compilers--even portable ones--have solved
this problem by simply offering the appropriate feature to users of the
respective systems.  This approach treats users of various Fortran
systems and dialects as remote "islands", or camps, of programmers, and
assume that these camps rarely come into contact with each other (or,
especially, with each other's code).

   Project GNU takes a radically different approach to software and
language design, in that it assumes that users of GNU software do not
necessarily care what kind of underlying system they are using,
regardless of whether they are using software (at the user-interface
level) or writing it (for example, writing Fortran or C code).

   As such, GNU users rarely need consider just what kind of underlying
hardware (or, in many cases, operating system) they are using at any
particular time.  They can use and write software designed for a
general-purpose, widely portable, heterogenous environment--the GNU
environment.

   In line with this philosophy, GNU Fortran must evolve into a product
that is widely ported and portable not only in the sense that it can be
successfully built, installed, and run by users, but in the larger
sense that its users can use it in the same way, and expect largely the
same behaviors from it, regardless of the kind of system they are using
at any particular time.

   This approach constrains the solutions `g77' can use to resolve
conflicts between various camps of Fortran users.  If these two camps
disagree about what a particular construct should mean, `g77' cannot
simply be changed to treat that particular construct as having one
meaning without comment (such as a warning), lest the users expecting
it to have the other meaning are unpleasantly surprised that their code
misbehaves when executed.

   The use of the ASCII backslash character in character constants is
an excellent (and still somewhat unresolved) example of this kind of
controversy.  *Note Backslash in Constants::.  Other examples are
likely to arise in the future, as `g77' developers strive to improve
its ability to accept an ever-wider variety of existing Fortran code
without requiring significant modifications to said code.

   Development of GNU Fortran is further constrained by the desire to
avoid requiring programmers to change their code.  This is important
because it allows programmers, administrators, and others to more
faithfully evaluate and validate `g77' (as an overall product and as
new versions are distributed) without having to support multiple
versions of their programs so that they continue to work the same way
on their existing systems (non-GNU perhaps, but possibly also earlier
versions of `g77').


File: g77,  Node: Standard Support,  Next: Conformance,  Prev: Direction of Language Development,  Up: Language

10.2 ANSI FORTRAN 77 Standard Support
=====================================

   GNU Fortran supports ANSI FORTRAN 77 with the following caveats.  In
summary, the only ANSI FORTRAN 77 features `g77' doesn't support are
those that are probably rarely used in actual code, some of which are
explicitly disallowed by the Fortran 90 standard.

* Menu:

* No Passing External Assumed-length::  CHAR*(*) CFUNC restriction.
* No Passing Dummy Assumed-length::     CHAR*(*) CFUNC restriction.
* No Pathological Implied-DO::          No `((..., I=...), I=...)'.
* No Useless Implied-DO::               No `(A, I=1, 1)'.


File: g77,  Node: No Passing External Assumed-length,  Next: No Passing Dummy Assumed-length,  Up: Standard Support

10.2.1 No Passing External Assumed-length
-----------------------------------------

   `g77' disallows passing of an external procedure as an actual
argument if the procedure's type is declared `CHARACTER*(*)'.  For
example:

     CHARACTER*(*) CFUNC
     EXTERNAL CFUNC
     CALL FOO(CFUNC)
     END

It isn't clear whether the standard considers this conforming.


File: g77,  Node: No Passing Dummy Assumed-length,  Next: No Pathological Implied-DO,  Prev: No Passing External Assumed-length,  Up: Standard Support

10.2.2 No Passing Dummy Assumed-length
--------------------------------------

   `g77' disallows passing of a dummy procedure as an actual argument
if the procedure's type is declared `CHARACTER*(*)'.

     SUBROUTINE BAR(CFUNC)
     CHARACTER*(*) CFUNC
     EXTERNAL CFUNC
     CALL FOO(CFUNC)
     END

It isn't clear whether the standard considers this conforming.


File: g77,  Node: No Pathological Implied-DO,  Next: No Useless Implied-DO,  Prev: No Passing Dummy Assumed-length,  Up: Standard Support

10.2.3 No Pathological Implied-DO
---------------------------------

   The `DO' variable for an implied-`DO' construct in a `DATA'
statement may not be used as the `DO' variable for an outer
implied-`DO' construct.  For example, this fragment is disallowed by
`g77':

     DATA ((A(I, I), I= 1, 10), I= 1, 10) /.../

This also is disallowed by Fortran 90, as it offers no additional
capabilities and would have a variety of possible meanings.

   Note that it is _very_ unlikely that any production Fortran code
tries to use this unsupported construct.


File: g77,  Node: No Useless Implied-DO,  Prev: No Pathological Implied-DO,  Up: Standard Support

10.2.4 No Useless Implied-DO
----------------------------

   An array element initializer in an implied-`DO' construct in a
`DATA' statement must contain at least one reference to the `DO'
variables of each outer implied-`DO' construct.  For example, this
fragment is disallowed by `g77':

     DATA (A, I= 1, 1) /1./

This also is disallowed by Fortran 90, as FORTRAN 77's more permissive
requirements offer no additional capabilities.  However, `g77' doesn't
necessarily diagnose all cases where this requirement is not met.

   Note that it is _very_ unlikely that any production Fortran code
tries to use this unsupported construct.


File: g77,  Node: Conformance,  Next: Notation Used,  Prev: Standard Support,  Up: Language

10.3 Conformance
================

   (The following information augments or overrides the information in
Section 1.4 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 1 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

   The definition of the GNU Fortran language is akin to that of the
ANSI FORTRAN 77 language in that it does not generally require
conforming implementations to diagnose cases where programs do not
conform to the language.

   However, `g77' as a compiler is being developed in a way that is
intended to enable it to diagnose such cases in an easy-to-understand
manner.

   A program that conforms to the GNU Fortran language should, when
compiled, linked, and executed using a properly installed `g77' system,
perform as described by the GNU Fortran language definition.  Reasons
for different behavior include, among others:

   * Use of resources (memory--heap, stack, and so on; disk space; CPU
     time; etc.) exceeds those of the system.

   * Range and/or precision of calculations required by the program
     exceeds that of the system.

   * Excessive reliance on behaviors that are system-dependent
     (non-portable Fortran code).

   * Bugs in the program.

   * Bug in `g77'.

   * Bugs in the system.

   Despite these "loopholes", the availability of a clear specification
of the language of programs submitted to `g77', as this document is
intended to provide, is considered an important aspect of providing a
robust, clean, predictable Fortran implementation.

   The definition of the GNU Fortran language, while having no special
legal status, can therefore be viewed as a sort of contract, or
agreement.  This agreement says, in essence, "if you write a program in
this language, and run it in an environment (such as a `g77' system)
that supports this language, the program should behave in a largely
predictable way".


File: g77,  Node: Notation Used,  Next: Terms and Concepts,  Prev: Conformance,  Up: Language

10.4 Notation Used in This Chapter
==================================

   (The following information augments or overrides the information in
Section 1.5 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 1 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

   In this chapter, "must" denotes a requirement, "may" denotes
permission, and "must not" and "may not" denote prohibition.  Terms
such as "might", "should", and "can" generally add little or nothing in
the way of weight to the GNU Fortran language itself, but are used to
explain or illustrate the language.

   For example:

     ``The `FROBNITZ' statement must precede all executable
     statements in a program unit, and may not specify any dummy
     arguments.  It may specify local or common variables and arrays.
     Its use should be limited to portions of the program designed to
     be non-portable and system-specific, because it might cause the
     containing program unit to behave quite differently on different
     systems.''

   Insofar as the GNU Fortran language is specified, the requirements
and permissions denoted by the above sample statement are limited to
the placement of the statement and the kinds of things it may specify.
The rest of the statement--the content regarding non-portable portions
of the program and the differing behavior of program units containing
the `FROBNITZ' statement--does not pertain the GNU Fortran language
itself.  That content offers advice and warnings about the `FROBNITZ'
statement.

   _Remember:_ The GNU Fortran language definition specifies both what
constitutes a valid GNU Fortran program and how, given such a program,
a valid GNU Fortran implementation is to interpret that program.

   It is _not_ incumbent upon a valid GNU Fortran implementation to
behave in any particular way, any consistent way, or any predictable
way when it is asked to interpret input that is _not_ a valid GNU
Fortran program.

   Such input is said to have "undefined" behavior when interpreted by
a valid GNU Fortran implementation, though an implementation may choose
to specify behaviors for some cases of inputs that are not valid GNU
Fortran programs.

   Other notation used herein is that of the GNU texinfo format, which
is used to generate printed hardcopy, on-line hypertext (Info), and
on-line HTML versions, all from a single source document.  This
notation is used as follows:

   * Keywords defined by the GNU Fortran language are shown in
     uppercase, as in: `COMMON', `INTEGER', and `BLOCK DATA'.

     Note that, in practice, many Fortran programs are written in
     lowercase--uppercase is used in this manual as a means to readily
     distinguish keywords and sample Fortran-related text from the
     prose in this document.

   * Portions of actual sample program, input, or output text look like
     this: `Actual program text'.

     Generally, uppercase is used for all Fortran-specific and
     Fortran-related text, though this does not always include literal
     text within Fortran code.

     For example: `PRINT *, 'My name is Bob''.

   * A metasyntactic variable--that is, a name used in this document to
     serve as a placeholder for whatever text is used by the user or
     programmer--appears as shown in the following example:

     "The `INTEGER IVAR' statement specifies that IVAR is a variable or
     array of type `INTEGER'."

     In the above example, any valid text may be substituted for the
     metasyntactic variable IVAR to make the statement apply to a
     specific instance, as long as the same text is substituted for
     _both_ occurrences of IVAR.

   * Ellipses ("...") are used to indicate further text that is either
     unimportant or expanded upon further, elsewhere.

   * Names of data types are in the style of Fortran 90, in most cases.

     *Note Kind Notation::, for information on the relationship between
     Fortran 90 nomenclature (such as `INTEGER(KIND=1)') and the more
     traditional, less portably concise nomenclature (such as
     `INTEGER*4').


File: g77,  Node: Terms and Concepts,  Next: Characters Lines Sequence,  Prev: Notation Used,  Up: Language

10.5 Fortran Terms and Concepts
===============================

   (The following information augments or overrides the information in
Chapter 2 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 2 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

* Menu:

* Syntactic Items::
* Statements Comments Lines::
* Scope of Names and Labels::


File: g77,  Node: Syntactic Items,  Next: Statements Comments Lines,  Up: Terms and Concepts

10.5.1 Syntactic Items
----------------------

   (Corresponds to Section 2.2 of ANSI X3.9-1978 FORTRAN 77.)

   In GNU Fortran, a symbolic name is at least one character long, and
has no arbitrary upper limit on length.  However, names of entities
requiring external linkage (such as external functions, external
subroutines, and `COMMON' areas) might be restricted to some arbitrary
length by the system.  Such a restriction is no more constrained than
that of one through six characters.

   Underscores (`_') are accepted in symbol names after the first
character (which must be a letter).


File: g77,  Node: Statements Comments Lines,  Next: Scope of Names and Labels,  Prev: Syntactic Items,  Up: Terms and Concepts

10.5.2 Statements, Comments, and Lines
--------------------------------------

   (Corresponds to Section 2.3 of ANSI X3.9-1978 FORTRAN 77.)

   Use of an exclamation point (`!') to begin a trailing comment (a
comment that extends to the end of the same source line) is permitted
under the following conditions:

   * The exclamation point does not appear in column 6.  Otherwise, it
     is treated as an indicator of a continuation line.

   * The exclamation point appears outside a character or Hollerith
     constant.  Otherwise, the exclamation point is considered part of
     the constant.

   * The exclamation point appears to the left of any other possible
     trailing comment.  That is, a trailing comment may contain
     exclamation points in their commentary text.

   Use of a semicolon (`;') as a statement separator is permitted under
the following conditions:

   * The semicolon appears outside a character or Hollerith constant.
     Otherwise, the semicolon is considered part of the constant.

   * The semicolon appears to the left of a trailing comment.
     Otherwise, the semicolon is considered part of that comment.

   * Neither a logical `IF' statement nor a non-construct `WHERE'
     statement (a Fortran 90 feature) may be followed (in the same,
     possibly continued, line) by a semicolon used as a statement
     separator.

     This restriction avoids the confusion that can result when reading
     a line such as:

          IF (VALIDP) CALL FOO; CALL BAR

     Some readers might think the `CALL BAR' is executed only if
     `VALIDP' is `.TRUE.', while others might assume its execution is
     unconditional.

     (At present, `g77' does not diagnose code that violates this
     restriction.)


File: g77,  Node: Scope of Names and Labels,  Prev: Statements Comments Lines,  Up: Terms and Concepts

10.5.3 Scope of Symbolic Names and Statement Labels
---------------------------------------------------

   (Corresponds to Section 2.9 of ANSI X3.9-1978 FORTRAN 77.)

   Included in the list of entities that have a scope of a program unit
are construct names (a Fortran 90 feature).  *Note Construct Names::,
for more information.


File: g77,  Node: Characters Lines Sequence,  Next: Data Types and Constants,  Prev: Terms and Concepts,  Up: Language

10.6 Characters, Lines, and Execution Sequence
==============================================

   (The following information augments or overrides the information in
Chapter 3 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 3 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

* Menu:

* Character Set::
* Lines::
* Continuation Line::
* Statements::
* Statement Labels::
* Order::
* INCLUDE::
* Cpp-style directives::


File: g77,  Node: Character Set,  Next: Lines,  Up: Characters Lines Sequence

10.6.1 GNU Fortran Character Set
--------------------------------

   (Corresponds to Section 3.1 of ANSI X3.9-1978 FORTRAN 77.)

   Letters include uppercase letters (the twenty-six characters of the
English alphabet) and lowercase letters (their lowercase equivalent).
Generally, lowercase letters may be used in place of uppercase letters,
though in character and Hollerith constants, they are distinct.

   Special characters include:

   * Semicolon (`;')

   * Exclamation point (`!')

   * Double quote (`"')

   * Backslash (`\')

   * Question mark (`?')

   * Hash mark (`#')

   * Ampersand (`&')

   * Percent sign (`%')

   * Underscore (`_')

   * Open angle (`<')

   * Close angle (`>')

   * The FORTRAN 77 special characters (<SPC>, `=', `+', `-', `*', `/',
     `(', `)', `,', `.', `$', `'', and `:')

   Note that this document refers to <SPC> as "space", while X3.9-1978
FORTRAN 77 refers to it as "blank".


File: g77,  Node: Lines,  Next: Continuation Line,  Prev: Character Set,  Up: Characters Lines Sequence

10.6.2 Lines
------------

   (Corresponds to Section 3.2 of ANSI X3.9-1978 FORTRAN 77.)

   The way a Fortran compiler views source files depends entirely on the
implementation choices made for the compiler, since those choices are
explicitly left to the implementation by the published Fortran
standards.

   The GNU Fortran language mandates a view applicable to UNIX-like
text files--files that are made up of an arbitrary number of lines,
each with an arbitrary number of characters (sometimes called
stream-based files).

   This view does not apply to types of files that are specified as
having a particular number of characters on every single line (sometimes
referred to as record-based files).

   Because a "line in a program unit is a sequence of 72 characters",
to quote X3.9-1978, the GNU Fortran language specifies that a
stream-based text file is translated to GNU Fortran lines as follows:

   * A newline in the file is the character that represents the end of
     a line of text to the underlying system.  For example, on
     ASCII-based systems, a newline is the <NL> character, which has
     ASCII value 10 (decimal).

   * Each newline in the file serves to end the line of text that
     precedes it (and that does not contain a newline).

   * The end-of-file marker (`EOF') also serves to end the line of text
     that precedes it (and that does not contain a newline).

   * Any line of text that is shorter than 72 characters is padded to
     that length with spaces (called "blanks" in the standard).

   * Any line of text that is longer than 72 characters is truncated to
     that length, but the truncated remainder must consist entirely of
     spaces.

   * Characters other than newline and the GNU Fortran character set
     are invalid.

   For the purposes of the remainder of this description of the GNU
Fortran language, the translation described above has already taken
place, unless otherwise specified.

   The result of the above translation is that the source file appears,
in terms of the remainder of this description of the GNU Fortran
language, as if it had an arbitrary number of 72-character lines, each
character being among the GNU Fortran character set.

   For example, if the source file itself has two newlines in a row,
the second newline becomes, after the above translation, a single line
containing 72 spaces.


File: g77,  Node: Continuation Line,  Next: Statements,  Prev: Lines,  Up: Characters Lines Sequence

10.6.3 Continuation Line
------------------------

   (Corresponds to Section 3.2.3 of ANSI X3.9-1978 FORTRAN 77.)

   A continuation line is any line that both

   * Contains a continuation character, and

   * Contains only spaces in columns 1 through 5

   A continuation character is any character of the GNU Fortran
character set other than space (<SPC>) or zero (`0') in column 6, or a
digit (`0' through `9') in column 7 through 72 of a line that has only
spaces to the left of that digit.

   The continuation character is ignored as far as the content of the
statement is concerned.

   The GNU Fortran language places no limit on the number of
continuation lines in a statement.  In practice, the limit depends on a
variety of factors, such as available memory, statement content, and so
on, but no GNU Fortran system may impose an arbitrary limit.


File: g77,  Node: Statements,  Next: Statement Labels,  Prev: Continuation Line,  Up: Characters Lines Sequence

10.6.4 Statements
-----------------

   (Corresponds to Section 3.3 of ANSI X3.9-1978 FORTRAN 77.)

   Statements may be written using an arbitrary number of continuation
lines.

   Statements may be separated using the semicolon (`;'), except that
the logical `IF' and non-construct `WHERE' statements may not be
separated from subsequent statements using only a semicolon as
statement separator.

   The `END PROGRAM', `END SUBROUTINE', `END FUNCTION', and `END BLOCK
DATA' statements are alternatives to the `END' statement.  These
alternatives may be written as normal statements--they are not subject
to the restrictions of the `END' statement.

   However, no statement other than `END' may have an initial line that
appears to be an `END' statement--even `END PROGRAM', for example, must
not be written as:

           END
          &PROGRAM


File: g77,  Node: Statement Labels,  Next: Order,  Prev: Statements,  Up: Characters Lines Sequence

10.6.5 Statement Labels
-----------------------

   (Corresponds to Section 3.4 of ANSI X3.9-1978 FORTRAN 77.)

   A statement separated from its predecessor via a semicolon may be
labeled as follows:

   * The semicolon is followed by the label for the statement, which in
     turn follows the label.

   * The label must be no more than five digits in length.

   * The first digit of the label for the statement is not the first
     non-space character on a line.  Otherwise, that character is
     treated as a continuation character.

   A statement may have only one label defined for it.


File: g77,  Node: Order,  Next: INCLUDE,  Prev: Statement Labels,  Up: Characters Lines Sequence

10.6.6 Order of Statements and Lines
------------------------------------

   (Corresponds to Section 3.5 of ANSI X3.9-1978 FORTRAN 77.)

   Generally, `DATA' statements may precede executable statements.
However, specification statements pertaining to any entities
initialized by a `DATA' statement must precede that `DATA' statement.
For example, after `DATA I/1/', `INTEGER I' is not permitted, but
`INTEGER J' is permitted.

   The last line of a program unit may be an `END' statement, or may be:

   * An `END PROGRAM' statement, if the program unit is a main program.

   * An `END SUBROUTINE' statement, if the program unit is a subroutine.

   * An `END FUNCTION' statement, if the program unit is a function.

   * An `END BLOCK DATA' statement, if the program unit is a block data.


File: g77,  Node: INCLUDE,  Next: Cpp-style directives,  Prev: Order,  Up: Characters Lines Sequence

10.6.7 Including Source Text
----------------------------

   Additional source text may be included in the processing of the
source file via the `INCLUDE' directive:

     INCLUDE FILENAME

The source text to be included is identified by FILENAME, which is a
literal GNU Fortran character constant.  The meaning and interpretation
of FILENAME depends on the implementation, but typically is a filename.

   (`g77' treats it as a filename that it searches for in the current
directory and/or directories specified via the `-I' command-line
option.)

   The effect of the `INCLUDE' directive is as if the included text
directly replaced the directive in the source file prior to
interpretation of the program.  Included text may itself use `INCLUDE'.
The depth of nested `INCLUDE' references depends on the implementation,
but typically is a positive integer.

   This virtual replacement treats the statements and `INCLUDE'
directives in the included text as syntactically distinct from those in
the including text.

   Therefore, the first non-comment line of the included text must not
be a continuation line.  The included text must therefore have, after
the non-comment lines, either an initial line (statement), an `INCLUDE'
directive, or nothing (the end of the included text).

   Similarly, the including text may end the `INCLUDE' directive with a
semicolon or the end of the line, but it cannot follow an `INCLUDE'
directive at the end of its line with a continuation line.  Thus, the
last statement in an included text may not be continued.

   Any statements between two `INCLUDE' directives on the same line are
treated as if they appeared in between the respective included texts.
For example:

     INCLUDE 'A'; PRINT *, 'B'; INCLUDE 'C'; END PROGRAM

If the text included by `INCLUDE 'A'' constitutes a `PRINT *, 'A''
statement and the text included by `INCLUDE 'C'' constitutes a `PRINT
*, 'C'' statement, then the output of the above sample program would be

     A
     B
     C

(with suitable allowances for how an implementation defines its
handling of output).

   Included text must not include itself directly or indirectly,
regardless of whether the FILENAME used to reference the text is the
same.

   Note that `INCLUDE' is _not_ a statement.  As such, it is neither a
non-executable or executable statement.  However, if the text it
includes constitutes one or more executable statements, then the
placement of `INCLUDE' is subject to effectively the same restrictions
as those on executable statements.

   An `INCLUDE' directive may be continued across multiple lines as if
it were a statement.  This permits long names to be used for FILENAME.


File: g77,  Node: Cpp-style directives,  Prev: INCLUDE,  Up: Characters Lines Sequence

10.6.8 Cpp-style directives
---------------------------

   `cpp' output-style `#' directives (*note C Preprocessor Output:
(cpp)C Preprocessor Output.)  are recognized by the compiler even when
the preprocessor isn't run on the input (as it is when compiling `.F'
files).  (Note the distinction between these `cpp' `#' _output_
directives and `#line' _input_ directives.)


File: g77,  Node: Data Types and Constants,  Next: Expressions,  Prev: Characters Lines Sequence,  Up: Language

10.7 Data Types and Constants
=============================

   (The following information augments or overrides the information in
Chapter 4 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 4 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

   To more concisely express the appropriate types for entities, this
document uses the more concise Fortran 90 nomenclature such as
`INTEGER(KIND=1)' instead of the more traditional, but less portably
concise, byte-size-based nomenclature such as `INTEGER*4', wherever
reasonable.

   When referring to generic types--in contexts where the specific
precision and range of a type are not important--this document uses the
generic type names `INTEGER', `LOGICAL', `REAL', `COMPLEX', and
`CHARACTER'.

   In some cases, the context requires specification of a particular
type.  This document uses the `KIND=' notation to accomplish this
throughout, sometimes supplying the more traditional notation for
clarification, though the traditional notation might not work the same
way on all GNU Fortran implementations.

   Use of `KIND=' makes this document more concise because `g77' is
able to define values for `KIND=' that have the same meanings on all
systems, due to the way the Fortran 90 standard specifies these values
are to be used.

   (In particular, that standard permits an implementation to
arbitrarily assign nonnegative values.  There are four distinct sets of
assignments: one to the `CHARACTER' type; one to the `INTEGER' type;
one to the `LOGICAL' type; and the fourth to both the `REAL' and
`COMPLEX' types.  Implementations are free to assign these values in
any order, leave gaps in the ordering of assignments, and assign more
than one value to a representation.)

   This makes `KIND=' values superior to the values used in
non-standard statements such as `INTEGER*4', because the meanings of
the values in those statements vary from machine to machine, compiler
to compiler, even operating system to operating system.

   However, use of `KIND=' is _not_ generally recommended when writing
portable code (unless, for example, the code is going to be compiled
only via `g77', which is a widely ported compiler).  GNU Fortran does
not yet have adequate language constructs to permit use of `KIND=' in a
fashion that would make the code portable to Fortran 90
implementations; and, this construct is known to _not_ be accepted by
many popular FORTRAN 77 implementations, so it cannot be used in code
that is to be ported to those.

   The distinction here is that this document is able to use specific
values for `KIND=' to concisely document the types of various
operations and operands.

   A Fortran program should use the FORTRAN 77 designations for the
appropriate GNU Fortran types--such as `INTEGER' for `INTEGER(KIND=1)',
`REAL' for `REAL(KIND=1)', and `DOUBLE COMPLEX' for
`COMPLEX(KIND=2)'--and, where no such designations exist, make use of
appropriate techniques (preprocessor macros, parameters, and so on) to
specify the types in a fashion that may be easily adjusted to suit each
particular implementation to which the program is ported.  (These types
generally won't need to be adjusted for ports of `g77'.)

   Further details regarding GNU Fortran data types and constants are
provided below.

* Menu:

* Types::
* Constants::
* Integer Type::
* Character Type::


File: g77,  Node: Types,  Next: Constants,  Up: Data Types and Constants

10.7.1 Data Types
-----------------

   (Corresponds to Section 4.1 of ANSI X3.9-1978 FORTRAN 77.)

   GNU Fortran supports these types:

  1. Integer (generic type `INTEGER')

  2. Real (generic type `REAL')

  3. Double precision

  4. Complex (generic type `COMPLEX')

  5. Logical (generic type `LOGICAL')

  6. Character (generic type `CHARACTER')

  7. Double Complex

   (The types numbered 1 through 6 above are standard FORTRAN 77 types.)

   The generic types shown above are referred to in this document using
only their generic type names.  Such references usually indicate that
any specific type (kind) of that generic type is valid.

   For example, a context described in this document as accepting the
`COMPLEX' type also is likely to accept the `DOUBLE COMPLEX' type.

   The GNU Fortran language supports three ways to specify a specific
kind of a generic type.

* Menu:

* Double Notation::  As in `DOUBLE COMPLEX'.
* Star Notation::    As in `INTEGER*4'.
* Kind Notation::    As in `INTEGER(KIND=1)'.


File: g77,  Node: Double Notation,  Next: Star Notation,  Up: Types

10.7.1.1 Double Notation
........................

   The GNU Fortran language supports two uses of the keyword `DOUBLE'
to specify a specific kind of type:

   * `DOUBLE PRECISION', equivalent to `REAL(KIND=2)'

   * `DOUBLE COMPLEX', equivalent to `COMPLEX(KIND=2)'

   Use one of the above forms where a type name is valid.

   While use of this notation is popular, it doesn't scale well in a
language or dialect rich in intrinsic types, as is the case for the GNU
Fortran language (especially planned future versions of it).

   After all, one rarely sees type names such as `DOUBLE INTEGER',
`QUADRUPLE REAL', or `QUARTER INTEGER'.  Instead, `INTEGER*8',
`REAL*16', and `INTEGER*1' often are substituted for these,
respectively, even though they do not always have the same meanings on
all systems.  (And, the fact that `DOUBLE REAL' does not exist as such
is an inconsistency.)

   Therefore, this document uses "double notation" only on occasion for
the benefit of those readers who are accustomed to it.


File: g77,  Node: Star Notation,  Next: Kind Notation,  Prev: Double Notation,  Up: Types

10.7.1.2 Star Notation
......................

   The following notation specifies the storage size for a type:

     GENERIC-TYPE*N

GENERIC-TYPE must be a generic type--one of `INTEGER', `REAL',
`COMPLEX', `LOGICAL', or `CHARACTER'.  N must be one or more digits
comprising a decimal integer number greater than zero.

   Use the above form where a type name is valid.

   The `*N' notation specifies that the amount of storage occupied by
variables and array elements of that type is N times the storage
occupied by a `CHARACTER*1' variable.

   This notation might indicate a different degree of precision and/or
range for such variables and array elements, and the functions that
return values of types using this notation.  It does not limit the
precision or range of values of that type in any particular way--use
explicit code to do that.

   Further, the GNU Fortran language requires no particular values for
N to be supported by an implementation via the `*N' notation.  `g77'
supports `INTEGER*1' (as `INTEGER(KIND=3)') on all systems, for example,
but not all implementations are required to do so, and `g77' is known
to not support `REAL*1' on most (or all) systems.

   As a result, except for GENERIC-TYPE of `CHARACTER', uses of this
notation should be limited to isolated portions of a program that are
intended to handle system-specific tasks and are expected to be
non-portable.

   (Standard FORTRAN 77 supports the `*N' notation for only
`CHARACTER', where it signifies not only the amount of storage
occupied, but the number of characters in entities of that type.
However, almost all Fortran compilers have supported this notation for
generic types, though with a variety of meanings for N.)

   Specifications of types using the `*N' notation always are
interpreted as specifications of the appropriate types described in
this document using the `KIND=N' notation, described below.

   While use of this notation is popular, it doesn't serve well in the
context of a widely portable dialect of Fortran, such as the GNU
Fortran language.

   For example, even on one particular machine, two or more popular
Fortran compilers might well disagree on the size of a type declared
`INTEGER*2' or `REAL*16'.  Certainly there is known to be disagreement
over such things among Fortran compilers on _different_ systems.

   Further, this notation offers no elegant way to specify sizes that
are not even multiples of the "byte size" typically designated by
`INTEGER*1'.  Use of "absurd" values (such as `INTEGER*1000') would
certainly be possible, but would perhaps be stretching the original
intent of this notation beyond the breaking point in terms of
widespread readability of documentation and code making use of it.

   Therefore, this document uses "star notation" only on occasion for
the benefit of those readers who are accustomed to it.


File: g77,  Node: Kind Notation,  Prev: Star Notation,  Up: Types

10.7.1.3 Kind Notation
......................

   The following notation specifies the kind-type selector of a type:

     GENERIC-TYPE(KIND=N)

Use the above form where a type name is valid.

   GENERIC-TYPE must be a generic type--one of `INTEGER', `REAL',
`COMPLEX', `LOGICAL', or `CHARACTER'.  N must be an integer
initialization expression that is a positive, nonzero value.

   Programmers are discouraged from writing these values directly into
their code.  Future versions of the GNU Fortran language will offer
facilities that will make the writing of code portable to `g77' _and_
Fortran 90 implementations simpler.

   However, writing code that ports to existing FORTRAN 77
implementations depends on avoiding the `KIND=' construct.

   The `KIND=' construct is thus useful in the context of GNU Fortran
for two reasons:

   * It provides a means to specify a type in a fashion that is
     portable across all GNU Fortran implementations (though not other
     FORTRAN 77 and Fortran 90 implementations).

   * It provides a sort of Rosetta stone for this document to use to
     concisely describe the types of various operations and operands.

   The values of N in the GNU Fortran language are assigned using a
scheme that:

   * Attempts to maximize the ability of readers of this document to
     quickly familiarize themselves with assignments for popular types

   * Provides a unique value for each specific desired meaning

   * Provides a means to automatically assign new values so they have a
     "natural" relationship to existing values, if appropriate, or, if
     no such relationship exists, will not interfere with future values
     assigned on the basis of such relationships

   * Avoids using values that are similar to values used in the
     existing, popular `*N' notation, to prevent readers from expecting
     that these implied correspondences work on all GNU Fortran
     implementations

   The assignment system accomplishes this by assigning to each
"fundamental meaning" of a specific type a unique prime number.
Combinations of fundamental meanings--for example, a type that is two
times the size of some other type--are assigned values of N that are
the products of the values for those fundamental meanings.

   A prime value of N is never given more than one fundamental meaning,
to avoid situations where some code or system cannot reasonably provide
those meanings in the form of a single type.

   The values of N assigned so far are:

`KIND=0'
     This value is reserved for future use.

     The planned future use is for this value to designate, explicitly,
     context-sensitive kind-type selection.  For example, the
     expression `1D0 * 0.1_0' would be equivalent to `1D0 * 0.1D0'.

`KIND=1'
     This corresponds to the default types for `REAL', `INTEGER',
     `LOGICAL', `COMPLEX', and `CHARACTER', as appropriate.

     These are the "default" types described in the Fortran 90 standard,
     though that standard does not assign any particular `KIND=' value
     to these types.

     (Typically, these are `REAL*4', `INTEGER*4', `LOGICAL*4', and
     `COMPLEX*8'.)

`KIND=2'
     This corresponds to types that occupy twice as much storage as the
     default types.  `REAL(KIND=2)' is `DOUBLE PRECISION' (typically
     `REAL*8'), `COMPLEX(KIND=2)' is `DOUBLE COMPLEX' (typically
     `COMPLEX*16'),

     These are the "double precision" types described in the Fortran 90
     standard, though that standard does not assign any particular
     `KIND=' value to these types.

     N of 4 thus corresponds to types that occupy four times as much
     storage as the default types, N of 8 to types that occupy eight
     times as much storage, and so on.

     The `INTEGER(KIND=2)' and `LOGICAL(KIND=2)' types are not
     necessarily supported by every GNU Fortran implementation.

`KIND=3'
     This corresponds to types that occupy as much storage as the
     default `CHARACTER' type, which is the same effective type as
     `CHARACTER(KIND=1)' (making that type effectively the same as
     `CHARACTER(KIND=3)').

     (Typically, these are `INTEGER*1' and `LOGICAL*1'.)

     N of 6 thus corresponds to types that occupy twice as much storage
     as the N=3 types, N of 12 to types that occupy four times as much
     storage, and so on.

     These are not necessarily supported by every GNU Fortran
     implementation.

`KIND=5'
     This corresponds to types that occupy half the storage as the
     default (N=1) types.

     (Typically, these are `INTEGER*2' and `LOGICAL*2'.)

     N of 25 thus corresponds to types that occupy one-quarter as much
     storage as the default types.

     These are not necessarily supported by every GNU Fortran
     implementation.

`KIND=7'
     This is valid only as `INTEGER(KIND=7)' and denotes the `INTEGER'
     type that has the smallest storage size that holds a pointer on
     the system.

     A pointer representable by this type is capable of uniquely
     addressing a `CHARACTER*1' variable, array, array element, or
     substring.

     (Typically this is equivalent to `INTEGER*4' or, on 64-bit
     systems, `INTEGER*8'.  In a compatible C implementation, it
     typically would be the same size and semantics of the C type `void
     *'.)

   Note that these are _proposed_ correspondences and might change in
future versions of `g77'--avoid writing code depending on them while
`g77', and therefore the GNU Fortran language it defines, is in beta
testing.

   Values not specified in the above list are reserved to future
versions of the GNU Fortran language.

   Implementation-dependent meanings will be assigned new, unique prime
numbers so as to not interfere with other implementation-dependent
meanings, and offer the possibility of increasing the portability of
code depending on such types by offering support for them in other GNU
Fortran implementations.

   Other meanings that might be given unique values are:

   * Types that make use of only half their storage size for
     representing precision and range.

     For example, some compilers offer options that cause `INTEGER'
     types to occupy the amount of storage that would be needed for
     `INTEGER(KIND=2)' types, but the range remains that of
     `INTEGER(KIND=1)'.

   * The IEEE single floating-point type.

   * Types with a specific bit pattern (endianness), such as the
     little-endian form of `INTEGER(KIND=1)'.  These could permit,
     conceptually, use of portable code and implementations on data
     files written by existing systems.

   Future _prime_ numbers should be given meanings in as incremental a
fashion as possible, to allow for flexibility and expressiveness in
combining types.

   For example, instead of defining a prime number for little-endian
IEEE doubles, one prime number might be assigned the meaning
"little-endian", another the meaning "IEEE double", and the value of N
for a little-endian IEEE double would thus naturally be the product of
those two respective assigned values.  (It could even be reasonable to
have IEEE values result from the products of prime values denoting
exponent and fraction sizes and meanings, hidden bit usage,
availability and representations of special values such as subnormals,
infinities, and Not-A-Numbers (NaNs), and so on.)

   This assignment mechanism, while not inherently required for future
versions of the GNU Fortran language, is worth using because it could
ease management of the "space" of supported types much easier in the
long run.

   The above approach suggests a mechanism for specifying inheritance
of intrinsic (built-in) types for an entire, widely portable product
line.  It is certainly reasonable that, unlike programmers of other
languages offering inheritance mechanisms that employ verbose names for
classes and subclasses, along with graphical browsers to elucidate the
relationships, Fortran programmers would employ a mechanism that works
by multiplying prime numbers together and finding the prime factors of
such products.

   Most of the advantages for the above scheme have been explained
above.  One disadvantage is that it could lead to the defining, by the
GNU Fortran language, of some fairly large prime numbers.  This could
lead to the GNU Fortran language being declared "munitions" by the
United States Department of Defense.


File: g77,  Node: Constants,  Next: Integer Type,  Prev: Types,  Up: Data Types and Constants

10.7.2 Constants
----------------

   (Corresponds to Section 4.2 of ANSI X3.9-1978 FORTRAN 77.)

   A "typeless constant" has one of the following forms:

     'BINARY-DIGITS'B
     'OCTAL-DIGITS'O
     'HEXADECIMAL-DIGITS'Z
     'HEXADECIMAL-DIGITS'X

BINARY-DIGITS, OCTAL-DIGITS, and HEXADECIMAL-DIGITS are nonempty
strings of characters in the set `01', `01234567', and
`0123456789ABCDEFabcdef', respectively.  (The value for `A' (and `a')
is 10, for `B' and `b' is 11, and so on.)

   A prefix-radix constant, such as `Z'ABCD'', can optionally be
treated as typeless.  *Note Options Controlling Fortran Dialect:
Fortran Dialect Options, for information on the `-ftypeless-boz' option.

   Typeless constants have values that depend on the context in which
they are used.

   All other constants, called "typed constants", are
interpreted--converted to internal form--according to their inherent
type.  Thus, context is _never_ a determining factor for the type, and
hence the interpretation, of a typed constant.  (All constants in the
ANSI FORTRAN 77 language are typed constants.)

   For example, `1' is always type `INTEGER(KIND=1)' in GNU Fortran
(called default INTEGER in Fortran 90), `9.435784839284958' is always
type `REAL(KIND=1)' (even if the additional precision specified is
lost, and even when used in a `REAL(KIND=2)' context), `1E0' is always
type `REAL(KIND=2)', and `1D0' is always type `REAL(KIND=2)'.


File: g77,  Node: Integer Type,  Next: Character Type,  Prev: Constants,  Up: Data Types and Constants

10.7.3 Integer Type
-------------------

   (Corresponds to Section 4.3 of ANSI X3.9-1978 FORTRAN 77.)

   An integer constant also may have one of the following forms:

     B'BINARY-DIGITS'
     O'OCTAL-DIGITS'
     Z'HEXADECIMAL-DIGITS'
     X'HEXADECIMAL-DIGITS'

BINARY-DIGITS, OCTAL-DIGITS, and HEXADECIMAL-DIGITS are nonempty
strings of characters in the set `01', `01234567', and
`0123456789ABCDEFabcdef', respectively.  (The value for `A' (and `a')
is 10, for `B' and `b' is 11, and so on.)


File: g77,  Node: Character Type,  Prev: Integer Type,  Up: Data Types and Constants

10.7.4 Character Type
---------------------

   (Corresponds to Section 4.8 of ANSI X3.9-1978 FORTRAN 77.)

   A character constant may be delimited by a pair of double quotes
(`"') instead of apostrophes.  In this case, an apostrophe within the
constant represents a single apostrophe, while a double quote is
represented in the source text of the constant by two consecutive double
quotes with no intervening spaces.

   A character constant may be empty (have a length of zero).

   A character constant may include a substring specification, The
value of such a constant is the value of the substring--for example,
the value of `'hello'(3:5)' is the same as the value of `'llo''.


File: g77,  Node: Expressions,  Next: Specification Statements,  Prev: Data Types and Constants,  Up: Language

10.8 Expressions
================

   (The following information augments or overrides the information in
Chapter 6 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 6 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

* Menu:

* %LOC()::


File: g77,  Node: %LOC(),  Up: Expressions

10.8.1 The `%LOC()' Construct
-----------------------------

     %LOC(ARG)

   The `%LOC()' construct is an expression that yields the value of the
location of its argument, ARG, in memory.  The size of the type of the
expression depends on the system--typically, it is equivalent to either
`INTEGER(KIND=1)' or `INTEGER(KIND=2)', though it is actually type
`INTEGER(KIND=7)'.

   The argument to `%LOC()' must be suitable as the left-hand side of
an assignment statement.  That is, it may not be a general expression
involving operators such as addition, subtraction, and so on, nor may
it be a constant.

   Use of `%LOC()' is recommended only for code that is accessing
facilities outside of GNU Fortran, such as operating system or
windowing facilities.  It is best to constrain such uses to isolated
portions of a program--portions that deal specifically and exclusively
with low-level, system-dependent facilities.  Such portions might well
provide a portable interface for use by the program as a whole, but are
themselves not portable, and should be thoroughly tested each time they
are rebuilt using a new compiler or version of a compiler.

   Do not depend on `%LOC()' returning a pointer that can be safely
used to _define_ (change) the argument.  While this might work in some
circumstances, it is hard to predict whether it will continue to work
when a program (that works using this unsafe behavior) is recompiled
using different command-line options or a different version of `g77'.

   Generally, `%LOC()' is safe when used as an argument to a procedure
that makes use of the value of the corresponding dummy argument only
during its activation, and only when such use is restricted to
referencing (reading) the value of the argument to `%LOC()'.

   _Implementation Note:_ Currently, `g77' passes arguments (those not
passed using a construct such as `%VAL()') by reference or descriptor,
depending on the type of the actual argument.  Thus, given `INTEGER I',
`CALL FOO(I)' would seem to mean the same thing as `CALL
FOO(%VAL(%LOC(I)))', and in fact might compile to identical code.

   However, `CALL FOO(%VAL(%LOC(I)))' emphatically means "pass, by
value, the address of `I' in memory".  While `CALL FOO(I)' might use
that same approach in a particular version of `g77', another version or
compiler might choose a different implementation, such as
copy-in/copy-out, to effect the desired behavior--and which will
therefore not necessarily compile to the same code as would `CALL
FOO(%VAL(%LOC(I)))' using the same version or compiler.

   *Note Debugging and Interfacing::, for detailed information on how
this particular version of `g77' implements various constructs.


File: g77,  Node: Specification Statements,  Next: Control Statements,  Prev: Expressions,  Up: Language

10.9 Specification Statements
=============================

   (The following information augments or overrides the information in
Chapter 8 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 8 of that document otherwise serves as the basis for
the relevant aspects of GNU Fortran.)

* Menu:

* NAMELIST::
* DOUBLE COMPLEX::


File: g77,  Node: NAMELIST,  Next: DOUBLE COMPLEX,  Up: Specification Statements

10.9.1 `NAMELIST' Statement
---------------------------

   The `NAMELIST' statement, and related I/O constructs, are supported
by the GNU Fortran language in essentially the same way as they are by
`f2c'.

   This follows Fortran 90 with the restriction that on `NAMELIST'
input, subscripts must have the form
     SUBSCRIPT [ `:' SUBSCRIPT [ `:' STRIDE]]
   i.e.
     &xx x(1:3,8:10:2)=1,2,3,4,5,6/
   is allowed, but not, say,
     &xx x(:3,8::2)=1,2,3,4,5,6/

   As an extension of the Fortran 90 form, `$' and `$END' may be used
in place of `&' and `/' in `NAMELIST' input, so that
     $&xx x(1:3,8:10:2)=1,2,3,4,5,6 $end
   could be used instead of the example above.


File: g77,  Node: DOUBLE COMPLEX,  Prev: NAMELIST,  Up: Specification Statements

10.9.2 `DOUBLE COMPLEX' Statement
---------------------------------

   `DOUBLE COMPLEX' is a type-statement (and type) that specifies the
type `COMPLEX(KIND=2)' in GNU Fortran.


File: g77,  Node: Control Statements,  Next: Functions and Subroutines,  Prev: Specification Statements,  Up: Language

10.10 Control Statements
========================

   (The following information augments or overrides the information in
Chapter 11 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 11 of that document otherwise serves as the basis
for the relevant aspects of GNU Fortran.)

* Menu:

* DO WHILE::
* END DO::
* Construct Names::
* CYCLE and EXIT::


File: g77,  Node: DO WHILE,  Next: END DO,  Up: Control Statements

10.10.1 DO WHILE
----------------

   The `DO WHILE' statement, a feature of both the MIL-STD 1753 and
Fortran 90 standards, is provided by the GNU Fortran language.  The
Fortran 90 "do forever" statement comprising just `DO' is also
supported.


File: g77,  Node: END DO,  Next: Construct Names,  Prev: DO WHILE,  Up: Control Statements

10.10.2 END DO
--------------

   The `END DO' statement is provided by the GNU Fortran language.

   This statement is used in one of two ways:

   * The Fortran 90 meaning, in which it specifies the termination
     point of a single `DO' loop started with a `DO' statement that
     specifies no termination label.

   * The MIL-STD 1753 meaning, in which it specifies the termination
     point of one or more `DO' loops, all of which start with a `DO'
     statement that specify the label defined for the `END DO'
     statement.

     This kind of `END DO' statement is merely a synonym for
     `CONTINUE', except it is permitted only when the statement is
     labeled and a target of one or more labeled `DO' loops.

     It is expected that this use of `END DO' will be removed from the
     GNU Fortran language in the future, though it is likely that it
     will long be supported by `g77' as a dialect form.


File: g77,  Node: Construct Names,  Next: CYCLE and EXIT,  Prev: END DO,  Up: Control Statements

10.10.3 Construct Names
-----------------------

   The GNU Fortran language supports construct names as defined by the
Fortran 90 standard.  These names are local to the program unit and are
defined as follows:

     CONSTRUCT-NAME: BLOCK-STATEMENT

Here, CONSTRUCT-NAME is the construct name itself; its definition is
connoted by the single colon (`:'); and BLOCK-STATEMENT is an `IF',
`DO', or `SELECT CASE' statement that begins a block.

   A block that is given a construct name must also specify the same
construct name in its termination statement:

     END BLOCK CONSTRUCT-NAME

Here, BLOCK must be `IF', `DO', or `SELECT', as appropriate.


File: g77,  Node: CYCLE and EXIT,  Prev: Construct Names,  Up: Control Statements

10.10.4 The `CYCLE' and `EXIT' Statements
-----------------------------------------

   The `CYCLE' and `EXIT' statements specify that the remaining
statements in the current iteration of a particular active (enclosing)
`DO' loop are to be skipped.

   `CYCLE' specifies that these statements are skipped, but the `END
DO' statement that marks the end of the `DO' loop be executed--that is,
the next iteration, if any, is to be started.  If the statement marking
the end of the `DO' loop is not `END DO'--in other words, if the loop
is not a block `DO'--the `CYCLE' statement does not execute that
statement, but does start the next iteration (if any).

   `EXIT' specifies that the loop specified by the `DO' construct is
terminated.

   The `DO' loop affected by `CYCLE' and `EXIT' is the innermost
enclosing `DO' loop when the following forms are used:

     CYCLE
     EXIT

   Otherwise, the following forms specify the construct name of the
pertinent `DO' loop:

     CYCLE CONSTRUCT-NAME
     EXIT CONSTRUCT-NAME

   `CYCLE' and `EXIT' can be viewed as glorified `GO TO' statements.
However, they cannot be easily thought of as `GO TO' statements in
obscure cases involving FORTRAN 77 loops.  For example:

           DO 10 I = 1, 5
           DO 10 J = 1, 5
              IF (J .EQ. 5) EXIT
           DO 10 K = 1, 5
              IF (K .EQ. 3) CYCLE
     10    PRINT *, 'I=', I, ' J=', J, ' K=', K
     20    CONTINUE

In particular, neither the `EXIT' nor `CYCLE' statements above are
equivalent to a `GO TO' statement to either label `10' or `20'.

   To understand the effect of `CYCLE' and `EXIT' in the above
fragment, it is helpful to first translate it to its equivalent using
only block `DO' loops:

           DO I = 1, 5
              DO J = 1, 5
                 IF (J .EQ. 5) EXIT
                 DO K = 1, 5
                    IF (K .EQ. 3) CYCLE
     10             PRINT *, 'I=', I, ' J=', J, ' K=', K
                 END DO
              END DO
           END DO
     20    CONTINUE

   Adding new labels allows translation of `CYCLE' and `EXIT' to `GO
TO' so they may be more easily understood by programmers accustomed to
FORTRAN coding:

           DO I = 1, 5
              DO J = 1, 5
                 IF (J .EQ. 5) GOTO 18
                 DO K = 1, 5
                    IF (K .EQ. 3) GO TO 12
     10             PRINT *, 'I=', I, ' J=', J, ' K=', K
     12          END DO
              END DO
     18    END DO
     20    CONTINUE

Thus, the `CYCLE' statement in the innermost loop skips over the
`PRINT' statement as it begins the next iteration of the loop, while
the `EXIT' statement in the middle loop ends that loop but _not_ the
outermost loop.


File: g77,  Node: Functions and Subroutines,  Next: Scope and Classes of Names,  Prev: Control Statements,  Up: Language

10.11 Functions and Subroutines
===============================

   (The following information augments or overrides the information in
Chapter 15 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 15 of that document otherwise serves as the basis
for the relevant aspects of GNU Fortran.)

* Menu:

* %VAL()::
* %REF()::
* %DESCR()::
* Generics and Specifics::
* REAL() and AIMAG() of Complex::
* CMPLX() of DOUBLE PRECISION::
* MIL-STD 1753::
* f77/f2c Intrinsics::
* Table of Intrinsic Functions::


File: g77,  Node: %VAL(),  Next: %REF(),  Up: Functions and Subroutines

10.11.1 The `%VAL()' Construct
------------------------------

     %VAL(ARG)

   The `%VAL()' construct specifies that an argument, ARG, is to be
passed by value, instead of by reference or descriptor.

   `%VAL()' is restricted to actual arguments in invocations of
external procedures.

   Use of `%VAL()' is recommended only for code that is accessing
facilities outside of GNU Fortran, such as operating system or
windowing facilities.  It is best to constrain such uses to isolated
portions of a program--portions the deal specifically and exclusively
with low-level, system-dependent facilities.  Such portions might well
provide a portable interface for use by the program as a whole, but are
themselves not portable, and should be thoroughly tested each time they
are rebuilt using a new compiler or version of a compiler.

   _Implementation Note:_ Currently, `g77' passes all arguments either
by reference or by descriptor.

   Thus, use of `%VAL()' tends to be restricted to cases where the
called procedure is written in a language other than Fortran that
supports call-by-value semantics.  (C is an example of such a language.)

   *Note Procedures (SUBROUTINE and FUNCTION): Procedures, for detailed
information on how this particular version of `g77' passes arguments to
procedures.


File: g77,  Node: %REF(),  Next: %DESCR(),  Prev: %VAL(),  Up: Functions and Subroutines

10.11.2 The `%REF()' Construct
------------------------------

     %REF(ARG)

   The `%REF()' construct specifies that an argument, ARG, is to be
passed by reference, instead of by value or descriptor.

   `%REF()' is restricted to actual arguments in invocations of
external procedures.

   Use of `%REF()' is recommended only for code that is accessing
facilities outside of GNU Fortran, such as operating system or
windowing facilities.  It is best to constrain such uses to isolated
portions of a program--portions the deal specifically and exclusively
with low-level, system-dependent facilities.  Such portions might well
provide a portable interface for use by the program as a whole, but are
themselves not portable, and should be thoroughly tested each time they
are rebuilt using a new compiler or version of a compiler.

   Do not depend on `%REF()' supplying a pointer to the procedure being
invoked.  While that is a likely implementation choice, other
implementation choices are available that preserve Fortran
pass-by-reference semantics without passing a pointer to the argument,
ARG.  (For example, a copy-in/copy-out implementation.)

   _Implementation Note:_ Currently, `g77' passes all arguments (other
than variables and arrays of type `CHARACTER') by reference.  Future
versions of, or dialects supported by, `g77' might not pass `CHARACTER'
functions by reference.

   Thus, use of `%REF()' tends to be restricted to cases where ARG is
type `CHARACTER' but the called procedure accesses it via a means other
than the method used for Fortran `CHARACTER' arguments.

   *Note Procedures (SUBROUTINE and FUNCTION): Procedures, for detailed
information on how this particular version of `g77' passes arguments to
procedures.


File: g77,  Node: %DESCR(),  Next: Generics and Specifics,  Prev: %REF(),  Up: Functions and Subroutines

10.11.3 The `%DESCR()' Construct
--------------------------------

     %DESCR(ARG)

   The `%DESCR()' construct specifies that an argument, ARG, is to be
passed by descriptor, instead of by value or reference.

   `%DESCR()' is restricted to actual arguments in invocations of
external procedures.

   Use of `%DESCR()' is recommended only for code that is accessing
facilities outside of GNU Fortran, such as operating system or
windowing facilities.  It is best to constrain such uses to isolated
portions of a program--portions the deal specifically and exclusively
with low-level, system-dependent facilities.  Such portions might well
provide a portable interface for use by the program as a whole, but are
themselves not portable, and should be thoroughly tested each time they
are rebuilt using a new compiler or version of a compiler.

   Do not depend on `%DESCR()' supplying a pointer and/or a length
passed by value to the procedure being invoked.  While that is a likely
implementation choice, other implementation choices are available that
preserve the pass-by-reference semantics without passing a pointer to
the argument, ARG.  (For example, a copy-in/copy-out implementation.)
And, future versions of `g77' might change the way descriptors are
implemented, such as passing a single argument pointing to a record
containing the pointer/length information instead of passing that same
information via two arguments as it currently does.

   _Implementation Note:_ Currently, `g77' passes all variables and
arrays of type `CHARACTER' by descriptor.  Future versions of, or
dialects supported by, `g77' might pass `CHARACTER' functions by
descriptor as well.

   Thus, use of `%DESCR()' tends to be restricted to cases where ARG is
not type `CHARACTER' but the called procedure accesses it via a means
similar to the method used for Fortran `CHARACTER' arguments.

   *Note Procedures (SUBROUTINE and FUNCTION): Procedures, for detailed
information on how this particular version of `g77' passes arguments to
procedures.


File: g77,  Node: Generics and Specifics,  Next: REAL() and AIMAG() of Complex,  Prev: %DESCR(),  Up: Functions and Subroutines

10.11.4 Generics and Specifics
------------------------------

   The ANSI FORTRAN 77 language defines generic and specific intrinsics.
In short, the distinctions are:

   * _Specific_ intrinsics have specific types for their arguments and
     a specific return type.

   * _Generic_ intrinsics are treated, on a case-by-case basis in the
     program's source code, as one of several possible specific
     intrinsics.

     Typically, a generic intrinsic has a return type that is
     determined by the type of one or more of its arguments.

   The GNU Fortran language generalizes these concepts somewhat,
especially by providing intrinsic subroutines and generic intrinsics
that are treated as either a specific intrinsic subroutine or a
specific intrinsic function (e.g. `SECOND').

   However, GNU Fortran avoids generalizing this concept to the point
where existing code would be accepted as meaning something possibly
different than what was intended.

   For example, `ABS' is a generic intrinsic, so all working code
written using `ABS' of an `INTEGER' argument expects an `INTEGER'
return value.  Similarly, all such code expects that `ABS' of an
`INTEGER*2' argument returns an `INTEGER*2' return value.

   Yet, `IABS' is a _specific_ intrinsic that accepts only an
`INTEGER(KIND=1)' argument.  Code that passes something other than an
`INTEGER(KIND=1)' argument to `IABS' is not valid GNU Fortran code,
because it is not clear what the author intended.

   For example, if `J' is `INTEGER(KIND=6)', `IABS(J)' is not defined
by the GNU Fortran language, because the programmer might have used
that construct to mean any of the following, subtly different, things:

   * Convert `J' to `INTEGER(KIND=1)' first (as if `IABS(INT(J))' had
     been written).

   * Convert the result of the intrinsic to `INTEGER(KIND=1)' (as if
     `INT(ABS(J))' had been written).

   * No conversion (as if `ABS(J)' had been written).

   The distinctions matter especially when types and values wider than
`INTEGER(KIND=1)' (such as `INTEGER(KIND=2)'), or when operations
performing more "arithmetic" than absolute-value, are involved.

   The following sample program is not a valid GNU Fortran program, but
might be accepted by other compilers.  If so, the output is likely to
be revealing in terms of how a given compiler treats intrinsics (that
normally are specific) when they are given arguments that do not
conform to their stated requirements:

           PROGRAM JCB002
     C Version 1:
     C Modified 1999-02-15 (Burley) to delete my email address.
     C Modified 1997-05-21 (Burley) to accommodate compilers that implement
     C INT(I1-I2) as INT(I1)-INT(I2) given INTEGER*2 I1,I2.
     C
     C Version 0:
     C Written by James Craig Burley 1997-02-20.
     C
     C Purpose:
     C Determine how compilers handle non-standard IDIM
     C on INTEGER*2 operands, which presumably can be
     C extrapolated into understanding how the compiler
     C generally treats specific intrinsics that are passed
     C arguments not of the correct types.
     C
     C If your compiler implements INTEGER*2 and INTEGER
     C as the same type, change all INTEGER*2 below to
     C INTEGER*1.
     C
           INTEGER*2 I0, I4
           INTEGER I1, I2, I3
           INTEGER*2 ISMALL, ILARGE
           INTEGER*2 ITOOLG, ITWO
           INTEGER*2 ITMP
           LOGICAL L2, L3, L4
     C
     C Find smallest INTEGER*2 number.
     C
           ISMALL=0
      10   I0 = ISMALL-1
           IF ((I0 .GE. ISMALL) .OR. (I0+1 .NE. ISMALL)) GOTO 20
           ISMALL = I0
           GOTO 10
      20   CONTINUE
     C
     C Find largest INTEGER*2 number.
     C
           ILARGE=0
      30   I0 = ILARGE+1
           IF ((I0 .LE. ILARGE) .OR. (I0-1 .NE. ILARGE)) GOTO 40
           ILARGE = I0
           GOTO 30
      40   CONTINUE
     C
     C Multiplying by two adds stress to the situation.
     C
           ITWO = 2
     C
     C Need a number that, added to -2, is too wide to fit in I*2.
     C
           ITOOLG = ISMALL
     C
     C Use IDIM the straightforward way.
     C
           I1 = IDIM (ILARGE, ISMALL) * ITWO + ITOOLG
     C
     C Calculate result for first interpretation.
     C
           I2 = (INT (ILARGE) - INT (ISMALL)) * ITWO + ITOOLG
     C
     C Calculate result for second interpretation.
     C
           ITMP = ILARGE - ISMALL
           I3 = (INT (ITMP)) * ITWO + ITOOLG
     C
     C Calculate result for third interpretation.
     C
           I4 = (ILARGE - ISMALL) * ITWO + ITOOLG
     C
     C Print results.
     C
           PRINT *, 'ILARGE=', ILARGE
           PRINT *, 'ITWO=', ITWO
           PRINT *, 'ITOOLG=', ITOOLG
           PRINT *, 'ISMALL=', ISMALL
           PRINT *, 'I1=', I1
           PRINT *, 'I2=', I2
           PRINT *, 'I3=', I3
           PRINT *, 'I4=', I4
           PRINT *
           L2 = (I1 .EQ. I2)
           L3 = (I1 .EQ. I3)
           L4 = (I1 .EQ. I4)
           IF (L2 .AND. .NOT.L3 .AND. .NOT.L4) THEN
              PRINT *, 'Interp 1: IDIM(I*2,I*2) => IDIM(INT(I*2),INT(I*2))'
              STOP
           END IF
           IF (L3 .AND. .NOT.L2 .AND. .NOT.L4) THEN
              PRINT *, 'Interp 2: IDIM(I*2,I*2) => INT(DIM(I*2,I*2))'
              STOP
           END IF
           IF (L4 .AND. .NOT.L2 .AND. .NOT.L3) THEN
              PRINT *, 'Interp 3: IDIM(I*2,I*2) => DIM(I*2,I*2)'
              STOP
           END IF
           PRINT *, 'Results need careful analysis.'
           END

   No future version of the GNU Fortran language will likely permit
specific intrinsic invocations with wrong-typed arguments (such as
`IDIM' in the above example), since it has been determined that
disagreements exist among many production compilers on the
interpretation of such invocations.  These disagreements strongly
suggest that Fortran programmers, and certainly existing Fortran
programs, disagree about the meaning of such invocations.

   The first version of `JCB002' didn't accommodate some compilers'
treatment of `INT(I1-I2)' where `I1' and `I2' are `INTEGER*2'.  In such
a case, these compilers apparently convert both operands to `INTEGER*4'
and then do an `INTEGER*4' subtraction, instead of doing an `INTEGER*2'
subtraction on the original values in `I1' and `I2'.

   However, the results of the careful analyses done on the outputs of
programs compiled by these various compilers show that they all
implement either `Interp 1' or `Interp 2' above.

   Specifically, it is believed that the new version of `JCB002' above
will confirm that:

   * Digital Semiconductor ("DEC") Alpha OSF/1, HP-UX 10.0.1, AIX 3.2.5
     `f77' compilers all implement `Interp 1'.

   * IRIX 5.3 `f77' compiler implements `Interp 2'.

   * Solaris 2.5, SunOS 4.1.3, DECstation ULTRIX 4.3, and IRIX 6.1
     `f77' compilers all implement `Interp 3'.

   If you get different results than the above for the stated
compilers, or have results for other compilers that might be worth
adding to the above list, please let us know the details (compiler
product, version, machine, results, and so on).


File: g77,  Node: REAL() and AIMAG() of Complex,  Next: CMPLX() of DOUBLE PRECISION,  Prev: Generics and Specifics,  Up: Functions and Subroutines

10.11.5 `REAL()' and `AIMAG()' of Complex
-----------------------------------------

   The GNU Fortran language disallows `REAL(EXPR)' and `AIMAG(EXPR)',
where EXPR is any `COMPLEX' type other than `COMPLEX(KIND=1)', except
when they are used in the following way:

     REAL(REAL(EXPR))
     REAL(AIMAG(EXPR))

The above forms explicitly specify that the desired effect is to
convert the real or imaginary part of EXPR, which might be some `REAL'
type other than `REAL(KIND=1)', to type `REAL(KIND=1)', and have that
serve as the value of the expression.

   The GNU Fortran language offers clearly named intrinsics to extract
the real and imaginary parts of a complex entity without any conversion:

     REALPART(EXPR)
     IMAGPART(EXPR)

   To express the above using typical extended FORTRAN 77, use the
following constructs (when EXPR is `COMPLEX(KIND=2)'):

     DBLE(EXPR)
     DIMAG(EXPR)

   The FORTRAN 77 language offers no way to explicitly specify the real
and imaginary parts of a complex expression of arbitrary type,
apparently as a result of requiring support for only one `COMPLEX' type
(`COMPLEX(KIND=1)').  The concepts of converting an expression to type
`REAL(KIND=1)' and of extracting the real part of a complex expression
were thus "smooshed" by FORTRAN 77 into a single intrinsic, since they
happened to have the exact same effect in that language (due to having
only one `COMPLEX' type).

   _Note:_ When `-ff90' is in effect, `g77' treats `REAL(EXPR)', where
EXPR is of type `COMPLEX', as `REALPART(EXPR)', whereas with
`-fugly-complex -fno-f90' in effect, it is treated as
`REAL(REALPART(EXPR))'.

   *Note Ugly Complex Part Extraction::, for more information.


File: g77,  Node: CMPLX() of DOUBLE PRECISION,  Next: MIL-STD 1753,  Prev: REAL() and AIMAG() of Complex,  Up: Functions and Subroutines

10.11.6 `CMPLX()' of `DOUBLE PRECISION'
---------------------------------------

   In accordance with Fortran 90 and at least some (perhaps all) other
compilers, the GNU Fortran language defines `CMPLX()' as always
returning a result that is type `COMPLEX(KIND=1)'.

   This means `CMPLX(D1,D2)', where `D1' and `D2' are `REAL(KIND=2)'
(`DOUBLE PRECISION'), is treated as:

     CMPLX(SNGL(D1), SNGL(D2))

   (It was necessary for Fortran 90 to specify this behavior for
`DOUBLE PRECISION' arguments, since that is the behavior mandated by
FORTRAN 77.)

   The GNU Fortran language also provides the `DCMPLX()' intrinsic,
which is provided by some FORTRAN 77 compilers to construct a `DOUBLE
COMPLEX' entity from of `DOUBLE PRECISION' operands.  However, this
solution does not scale well when more `COMPLEX' types (having various
precisions and ranges) are offered by Fortran implementations.

   Fortran 90 extends the `CMPLX()' intrinsic by adding an extra
argument used to specify the desired kind of complex result.  However,
this solution is somewhat awkward to use, and `g77' currently does not
support it.

   The GNU Fortran language provides a simple way to build a complex
value out of two numbers, with the precise type of the value determined
by the types of the two numbers (via the usual type-promotion
mechanism):

     COMPLEX(REAL, IMAG)

   When REAL and IMAG are the same `REAL' types, `COMPLEX()' performs
no conversion other than to put them together to form a complex result
of the same (complex version of real) type.

   *Note Complex Intrinsic::, for more information.


File: g77,  Node: MIL-STD 1753,  Next: f77/f2c Intrinsics,  Prev: CMPLX() of DOUBLE PRECISION,  Up: Functions and Subroutines

10.11.7 MIL-STD 1753 Support
----------------------------

   The GNU Fortran language includes the MIL-STD 1753 intrinsics
`BTEST', `IAND', `IBCLR', `IBITS', `IBSET', `IEOR', `IOR', `ISHFT',
`ISHFTC', `MVBITS', and `NOT'.


File: g77,  Node: f77/f2c Intrinsics,  Next: Table of Intrinsic Functions,  Prev: MIL-STD 1753,  Up: Functions and Subroutines

10.11.8 `f77'/`f2c' Intrinsics
------------------------------

   The bit-manipulation intrinsics supported by traditional `f77' and
by `f2c' are available in the GNU Fortran language.  These include
`AND', `LSHIFT', `OR', `RSHIFT', and `XOR'.

   Also supported are the intrinsics `CDABS', `CDCOS', `CDEXP',
`CDLOG', `CDSIN', `CDSQRT', `DCMPLX', `DCONJG', `DFLOAT', `DIMAG',
`DREAL', and `IMAG', `ZABS', `ZCOS', `ZEXP', `ZLOG', `ZSIN', and
`ZSQRT'.


File: g77,  Node: Table of Intrinsic Functions,  Prev: f77/f2c Intrinsics,  Up: Functions and Subroutines

10.11.9 Table of Intrinsic Functions
------------------------------------

   (Corresponds to Section 15.10 of ANSI X3.9-1978 FORTRAN 77.)

   The GNU Fortran language adds various functions, subroutines, types,
and arguments to the set of intrinsic functions in ANSI FORTRAN 77.
The complete set of intrinsics supported by the GNU Fortran language is
described below.

   Note that a name is not treated as that of an intrinsic if it is
specified in an `EXTERNAL' statement in the same program unit; if a
command-line option is used to disable the groups to which the
intrinsic belongs; or if the intrinsic is not named in an `INTRINSIC'
statement and a command-line option is used to hide the groups to which
the intrinsic belongs.

   So, it is recommended that any reference in a program unit to an
intrinsic procedure that is not a standard FORTRAN 77 intrinsic be
accompanied by an appropriate `INTRINSIC' statement in that program
unit.  This sort of defensive programming makes it more likely that an
implementation will issue a diagnostic rather than generate incorrect
code for such a reference.

   The terminology used below is based on that of the Fortran 90
standard, so that the text may be more concise and accurate:

   * `OPTIONAL' means the argument may be omitted.

   * `A-1, A-2, ..., A-n' means more than one argument (generally named
     `A') may be specified.

   * `scalar' means the argument must not be an array (must be a
     variable or array element, or perhaps a constant if expressions
     are permitted).

   * `DIMENSION(4)' means the argument must be an array having 4
     elements.

   * `INTENT(IN)' means the argument must be an expression (such as a
     constant or a variable that is defined upon invocation of the
     intrinsic).

   * `INTENT(OUT)' means the argument must be definable by the
     invocation of the intrinsic (that is, must not be a constant nor
     an expression involving operators other than array reference and
     substring reference).

   * `INTENT(INOUT)' means the argument must be defined prior to, and
     definable by, invocation of the intrinsic (a combination of the
     requirements of `INTENT(IN)' and `INTENT(OUT)'.

   * *Note Kind Notation::, for an explanation of `KIND'.

   (Note that the empty lines appearing in the menu below are not
intentional--they result from a bug in the GNU `makeinfo' program...a
program that, if it did not exist, would leave this document in far
worse shape!)

* Menu:


* Abort Intrinsic::     Abort the program.

* Abs Intrinsic::       Absolute value.

* Access Intrinsic::    Check file accessibility.

* AChar Intrinsic::     ASCII character from code.

* ACos Intrinsic::      Arc cosine.

* AdjustL Intrinsic::   (Reserved for future use.)
* AdjustR Intrinsic::   (Reserved for future use.)

* AImag Intrinsic::     Convert/extract imaginary part of complex.

* AInt Intrinsic::      Truncate to whole number.

* Alarm Intrinsic::     Execute a routine after a given delay.

* All Intrinsic::       (Reserved for future use.)
* Allocated Intrinsic:: (Reserved for future use.)

* ALog Intrinsic::      Natural logarithm (archaic).
* ALog10 Intrinsic::    Common logarithm (archaic).
* AMax0 Intrinsic::     Maximum value (archaic).
* AMax1 Intrinsic::     Maximum value (archaic).
* AMin0 Intrinsic::     Minimum value (archaic).
* AMin1 Intrinsic::     Minimum value (archaic).
* AMod Intrinsic::      Remainder (archaic).

* And Intrinsic::       Boolean AND.

* ANInt Intrinsic::     Round to nearest whole number.

* Any Intrinsic::       (Reserved for future use.)

* ASin Intrinsic::      Arc sine.

* Associated Intrinsic:: (Reserved for future use.)

* ATan Intrinsic::      Arc tangent.
* ATan2 Intrinsic::     Arc tangent.

* BesJ0 Intrinsic::     Bessel function.
* BesJ1 Intrinsic::     Bessel function.
* BesJN Intrinsic::     Bessel function.
* BesY0 Intrinsic::     Bessel function.
* BesY1 Intrinsic::     Bessel function.
* BesYN Intrinsic::     Bessel function.

* Bit_Size Intrinsic::  Number of bits in argument's type.

* BTest Intrinsic::     Test bit.

* CAbs Intrinsic::      Absolute value (archaic).
* CCos Intrinsic::      Cosine (archaic).

* Ceiling Intrinsic::   (Reserved for future use.)

* CExp Intrinsic::      Exponential (archaic).
* Char Intrinsic::      Character from code.

* ChDir Intrinsic (subroutine):: Change directory.

* ChMod Intrinsic (subroutine):: Change file modes.

* CLog Intrinsic::      Natural logarithm (archaic).
* Cmplx Intrinsic::     Construct `COMPLEX(KIND=1)' value.

* Complex Intrinsic::   Build complex value from real and
                         imaginary parts.

* Conjg Intrinsic::     Complex conjugate.
* Cos Intrinsic::       Cosine.

* CosH Intrinsic::      Hyperbolic cosine.

* Count Intrinsic::     (Reserved for future use.)
* CPU_Time Intrinsic::  Get current CPU time.
* CShift Intrinsic::    (Reserved for future use.)

* CSin Intrinsic::      Sine (archaic).
* CSqRt Intrinsic::     Square root (archaic).

* CTime Intrinsic (subroutine):: Convert time to Day Mon dd hh:mm:ss yyyy.
* CTime Intrinsic (function):: Convert time to Day Mon dd hh:mm:ss yyyy.

* DAbs Intrinsic::      Absolute value (archaic).
* DACos Intrinsic::     Arc cosine (archaic).

* DASin Intrinsic::     Arc sine (archaic).

* DATan Intrinsic::     Arc tangent (archaic).
* DATan2 Intrinsic::    Arc tangent (archaic).

* Date_and_Time Intrinsic:: Get the current date and time.

* DbesJ0 Intrinsic::    Bessel function (archaic).
* DbesJ1 Intrinsic::    Bessel function (archaic).
* DbesJN Intrinsic::    Bessel function (archaic).
* DbesY0 Intrinsic::    Bessel function (archaic).
* DbesY1 Intrinsic::    Bessel function (archaic).
* DbesYN Intrinsic::    Bessel function (archaic).

* Dble Intrinsic::      Convert to double precision.

* DCos Intrinsic::      Cosine (archaic).

* DCosH Intrinsic::     Hyperbolic cosine (archaic).
* DDiM Intrinsic::      Difference magnitude (archaic).

* DErF Intrinsic::      Error function (archaic).
* DErFC Intrinsic::     Complementary error function (archaic).

* DExp Intrinsic::      Exponential (archaic).

* Digits Intrinsic::    (Reserved for future use.)

* DiM Intrinsic::       Difference magnitude (non-negative subtract).

* DInt Intrinsic::      Truncate to whole number (archaic).
* DLog Intrinsic::      Natural logarithm (archaic).
* DLog10 Intrinsic::    Common logarithm (archaic).
* DMax1 Intrinsic::     Maximum value (archaic).
* DMin1 Intrinsic::     Minimum value (archaic).
* DMod Intrinsic::      Remainder (archaic).
* DNInt Intrinsic::     Round to nearest whole number (archaic).

* Dot_Product Intrinsic:: (Reserved for future use.)

* DProd Intrinsic::     Double-precision product.

* DSign Intrinsic::     Apply sign to magnitude (archaic).
* DSin Intrinsic::      Sine (archaic).

* DSinH Intrinsic::     Hyperbolic sine (archaic).
* DSqRt Intrinsic::     Square root (archaic).
* DTan Intrinsic::      Tangent (archaic).

* DTanH Intrinsic::     Hyperbolic tangent (archaic).

* DTime Intrinsic (subroutine):: Get elapsed time since last time.

* EOShift Intrinsic::   (Reserved for future use.)
* Epsilon Intrinsic::   (Reserved for future use.)

* ErF Intrinsic::       Error function.
* ErFC Intrinsic::      Complementary error function.
* ETime Intrinsic (subroutine):: Get elapsed time for process.
* ETime Intrinsic (function):: Get elapsed time for process.
* Exit Intrinsic::      Terminate the program.

* Exp Intrinsic::       Exponential.

* Exponent Intrinsic::  (Reserved for future use.)

* FDate Intrinsic (subroutine):: Get current time as Day Mon dd hh:mm:ss yyyy.
* FDate Intrinsic (function):: Get current time as Day Mon dd hh:mm:ss yyyy.
* FGet Intrinsic (subroutine):: Read a character from unit 5 stream-wise.

* FGetC Intrinsic (subroutine):: Read a character stream-wise.

* Float Intrinsic::     Conversion (archaic).

* Floor Intrinsic::     (Reserved for future use.)

* Flush Intrinsic::     Flush buffered output.
* FNum Intrinsic::      Get file descriptor from Fortran unit number.
* FPut Intrinsic (subroutine):: Write a character to unit 6 stream-wise.

* FPutC Intrinsic (subroutine):: Write a character stream-wise.

* Fraction Intrinsic::  (Reserved for future use.)

* FSeek Intrinsic::     Position file (low-level).
* FStat Intrinsic (subroutine):: Get file information.
* FStat Intrinsic (function):: Get file information.
* FTell Intrinsic (subroutine):: Get file position (low-level).
* FTell Intrinsic (function):: Get file position (low-level).
* GError Intrinsic::    Get error message for last error.
* GetArg Intrinsic::    Obtain command-line argument.
* GetCWD Intrinsic (subroutine):: Get current working directory.
* GetCWD Intrinsic (function):: Get current working directory.
* GetEnv Intrinsic::    Get environment variable.
* GetGId Intrinsic::    Get process group id.
* GetLog Intrinsic::    Get login name.
* GetPId Intrinsic::    Get process id.
* GetUId Intrinsic::    Get process user id.
* GMTime Intrinsic::    Convert time to GMT time info.
* HostNm Intrinsic (subroutine):: Get host name.
* HostNm Intrinsic (function):: Get host name.

* Huge Intrinsic::      (Reserved for future use.)

* IAbs Intrinsic::      Absolute value (archaic).

* IAChar Intrinsic::    ASCII code for character.

* IAnd Intrinsic::      Boolean AND.

* IArgC Intrinsic::     Obtain count of command-line arguments.

* IBClr Intrinsic::     Clear a bit.
* IBits Intrinsic::     Extract a bit subfield of a variable.
* IBSet Intrinsic::     Set a bit.

* IChar Intrinsic::     Code for character.

* IDate Intrinsic (UNIX):: Get local time info.

* IDiM Intrinsic::      Difference magnitude (archaic).
* IDInt Intrinsic::     Convert to `INTEGER' value truncated
                         to whole number (archaic).
* IDNInt Intrinsic::    Convert to `INTEGER' value rounded
                         to nearest whole number (archaic).

* IEOr Intrinsic::      Boolean XOR.

* IErrNo Intrinsic::    Get error number for last error.

* IFix Intrinsic::      Conversion (archaic).

* Imag Intrinsic::      Extract imaginary part of complex.

* ImagPart Intrinsic::  Extract imaginary part of complex.

* Index Intrinsic::     Locate a CHARACTER substring.

* Int Intrinsic::       Convert to `INTEGER' value truncated
                         to whole number.

* Int2 Intrinsic::      Convert to `INTEGER(KIND=6)' value
                         truncated to whole number.
* Int8 Intrinsic::      Convert to `INTEGER(KIND=2)' value
                         truncated to whole number.

* IOr Intrinsic::       Boolean OR.

* IRand Intrinsic::     Random number.
* IsaTty Intrinsic::    Is unit connected to a terminal?

* IShft Intrinsic::     Logical bit shift.
* IShftC Intrinsic::    Circular bit shift.

* ISign Intrinsic::     Apply sign to magnitude (archaic).

* ITime Intrinsic::     Get local time of day.

* Kill Intrinsic (subroutine):: Signal a process.

* Kind Intrinsic::      (Reserved for future use.)
* LBound Intrinsic::    (Reserved for future use.)

* Len Intrinsic::       Length of character entity.

* Len_Trim Intrinsic::  Get last non-blank character in string.

* LGe Intrinsic::       Lexically greater than or equal.
* LGt Intrinsic::       Lexically greater than.

* Link Intrinsic (subroutine):: Make hard link in file system.

* LLe Intrinsic::       Lexically less than or equal.
* LLt Intrinsic::       Lexically less than.

* LnBlnk Intrinsic::    Get last non-blank character in string.
* Loc Intrinsic::       Address of entity in core.

* Log Intrinsic::       Natural logarithm.
* Log10 Intrinsic::     Common logarithm.

* Logical Intrinsic::   (Reserved for future use.)

* Long Intrinsic::      Conversion to `INTEGER(KIND=1)' (archaic).

* LShift Intrinsic::    Left-shift bits.

* LStat Intrinsic (subroutine):: Get file information.
* LStat Intrinsic (function):: Get file information.
* LTime Intrinsic::     Convert time to local time info.

* MatMul Intrinsic::    (Reserved for future use.)

* Max Intrinsic::       Maximum value.
* Max0 Intrinsic::      Maximum value (archaic).
* Max1 Intrinsic::      Maximum value (archaic).

* MaxExponent Intrinsic:: (Reserved for future use.)
* MaxLoc Intrinsic::    (Reserved for future use.)
* MaxVal Intrinsic::    (Reserved for future use.)

* MClock Intrinsic::    Get number of clock ticks for process.
* MClock8 Intrinsic::   Get number of clock ticks for process.

* Merge Intrinsic::     (Reserved for future use.)

* Min Intrinsic::       Minimum value.
* Min0 Intrinsic::      Minimum value (archaic).
* Min1 Intrinsic::      Minimum value (archaic).

* MinExponent Intrinsic:: (Reserved for future use.)
* MinLoc Intrinsic::    (Reserved for future use.)
* MinVal Intrinsic::    (Reserved for future use.)

* Mod Intrinsic::       Remainder.

* Modulo Intrinsic::    (Reserved for future use.)

* MvBits Intrinsic::    Moving a bit field.

* Nearest Intrinsic::   (Reserved for future use.)

* NInt Intrinsic::      Convert to `INTEGER' value rounded
                         to nearest whole number.

* Not Intrinsic::       Boolean NOT.

* Or Intrinsic::        Boolean OR.

* Pack Intrinsic::      (Reserved for future use.)

* PError Intrinsic::    Print error message for last error.

* Precision Intrinsic:: (Reserved for future use.)
* Present Intrinsic::   (Reserved for future use.)
* Product Intrinsic::   (Reserved for future use.)

* Radix Intrinsic::     (Reserved for future use.)

* Rand Intrinsic::      Random number.

* Random_Number Intrinsic:: (Reserved for future use.)
* Random_Seed Intrinsic:: (Reserved for future use.)
* Range Intrinsic::     (Reserved for future use.)

* Real Intrinsic::      Convert value to type `REAL(KIND=1)'.

* RealPart Intrinsic::  Extract real part of complex.

* Rename Intrinsic (subroutine):: Rename file.

* Repeat Intrinsic::    (Reserved for future use.)
* Reshape Intrinsic::   (Reserved for future use.)
* RRSpacing Intrinsic:: (Reserved for future use.)

* RShift Intrinsic::    Right-shift bits.

* Scale Intrinsic::     (Reserved for future use.)
* Scan Intrinsic::      (Reserved for future use.)

* Second Intrinsic (function):: Get CPU time for process in seconds.
* Second Intrinsic (subroutine):: Get CPU time for process
                         in seconds.

* Selected_Int_Kind Intrinsic:: (Reserved for future use.)
* Selected_Real_Kind Intrinsic:: (Reserved for future use.)
* Set_Exponent Intrinsic:: (Reserved for future use.)
* Shape Intrinsic::     (Reserved for future use.)

* Short Intrinsic::     Convert to `INTEGER(KIND=6)' value
                         truncated to whole number.

* Sign Intrinsic::      Apply sign to magnitude.

* Signal Intrinsic (subroutine):: Muck with signal handling.

* Sin Intrinsic::       Sine.

* SinH Intrinsic::      Hyperbolic sine.

* Sleep Intrinsic::     Sleep for a specified time.

* Sngl Intrinsic::      Convert (archaic).

* Spacing Intrinsic::   (Reserved for future use.)
* Spread Intrinsic::    (Reserved for future use.)

* SqRt Intrinsic::      Square root.

* SRand Intrinsic::     Random seed.
* Stat Intrinsic (subroutine):: Get file information.
* Stat Intrinsic (function):: Get file information.

* Sum Intrinsic::       (Reserved for future use.)

* SymLnk Intrinsic (subroutine):: Make symbolic link in file system.

* System Intrinsic (subroutine):: Invoke shell (system) command.

* System_Clock Intrinsic:: Get current system clock value.

* Tan Intrinsic::       Tangent.

* TanH Intrinsic::      Hyperbolic tangent.

* Time Intrinsic (UNIX):: Get current time as time value.

* Time8 Intrinsic::     Get current time as time value.

* Tiny Intrinsic::      (Reserved for future use.)
* Transfer Intrinsic::  (Reserved for future use.)
* Transpose Intrinsic:: (Reserved for future use.)
* Trim Intrinsic::      (Reserved for future use.)

* TtyNam Intrinsic (subroutine):: Get name of terminal device for unit.
* TtyNam Intrinsic (function):: Get name of terminal device for unit.

* UBound Intrinsic::    (Reserved for future use.)

* UMask Intrinsic (subroutine):: Set file creation permissions mask.

* Unlink Intrinsic (subroutine):: Unlink file.

* Unpack Intrinsic::    (Reserved for future use.)
* Verify Intrinsic::    (Reserved for future use.)

* XOr Intrinsic::       Boolean XOR.
* ZAbs Intrinsic::      Absolute value (archaic).
* ZCos Intrinsic::      Cosine (archaic).
* ZExp Intrinsic::      Exponential (archaic).

* ZLog Intrinsic::      Natural logarithm (archaic).
* ZSin Intrinsic::      Sine (archaic).
* ZSqRt Intrinsic::     Square root (archaic).


File: g77,  Node: Abort Intrinsic,  Next: Abs Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.1 Abort Intrinsic
.........................

     CALL Abort()

Intrinsic groups: `unix'.

Description:

   Prints a message and potentially causes a core dump via `abort(3)'.


File: g77,  Node: Abs Intrinsic,  Next: Access Intrinsic,  Prev: Abort Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.2 Abs Intrinsic
.......................

     Abs(A)

Abs: `INTEGER' or `REAL' function.  The exact type depends on that of
argument A--if A is `COMPLEX', this function's type is `REAL' with the
same `KIND=' value as the type of A.  Otherwise, this function's type
is the same as that of A.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the absolute value of A.

   If A is type `COMPLEX', the absolute value is computed as:

     SQRT(REALPART(A)**2, IMAGPART(A)**2)

Otherwise, it is computed by negating the A if it is negative, or
returning A.

   *Note Sign Intrinsic::, for how to explicitly compute the positive
or negative form of the absolute value of an expression.


File: g77,  Node: Access Intrinsic,  Next: AChar Intrinsic,  Prev: Abs Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.3 Access Intrinsic
..........................

     Access(NAME, MODE)

Access: `INTEGER(KIND=1)' function.

NAME: `CHARACTER'; scalar; INTENT(IN).

MODE: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Checks file NAME for accessibility in the mode specified by MODE and
returns 0 if the file is accessible in that mode, otherwise an error
code if the file is inaccessible or MODE is invalid.  See `access(2)'.
A null character (`CHAR(0)') marks the end of the name in
NAME--otherwise, trailing blanks in NAME are ignored.  MODE may be a
concatenation of any of the following characters:

`r'
     Read permission

`w'
     Write permission

`x'
     Execute permission

`SPC'
     Existence


File: g77,  Node: AChar Intrinsic,  Next: ACos Intrinsic,  Prev: Access Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.4 AChar Intrinsic
.........................

     AChar(I)

AChar: `CHARACTER*1' function.

I: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `f90'.

Description:

   Returns the ASCII character corresponding to the code specified by I.

   *Note IAChar Intrinsic::, for the inverse of this function.

   *Note Char Intrinsic::, for the function corresponding to the
system's native character set.


File: g77,  Node: ACos Intrinsic,  Next: AdjustL Intrinsic,  Prev: AChar Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.5 ACos Intrinsic
........................

     ACos(X)

ACos: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the arc-cosine (inverse cosine) of X in radians.

   *Note Cos Intrinsic::, for the inverse of this function.


File: g77,  Node: AdjustL Intrinsic,  Next: AdjustR Intrinsic,  Prev: ACos Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.6 AdjustL Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AdjustL' to use this name for
an external procedure.


File: g77,  Node: AdjustR Intrinsic,  Next: AImag Intrinsic,  Prev: AdjustL Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.7 AdjustR Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AdjustR' to use this name for
an external procedure.


File: g77,  Node: AImag Intrinsic,  Next: AInt Intrinsic,  Prev: AdjustR Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.8 AImag Intrinsic
.........................

     AImag(Z)

AImag: `REAL' function.  This intrinsic is valid when argument Z is
`COMPLEX(KIND=1)'.  When Z is any other `COMPLEX' type, this intrinsic
is valid only when used as the argument to `REAL()', as explained below.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the (possibly converted) imaginary part of Z.

   Use of `AIMAG()' with an argument of a type other than
`COMPLEX(KIND=1)' is restricted to the following case:

     REAL(AIMAG(Z))

This expression converts the imaginary part of Z to `REAL(KIND=1)'.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77,  Node: AInt Intrinsic,  Next: Alarm Intrinsic,  Prev: AImag Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.9 AInt Intrinsic
........................

     AInt(A)

AInt: `REAL' function, the `KIND=' value of the type being that of
argument A.

A: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved.  (Also called "truncation towards zero".)

   *Note ANInt Intrinsic::, for how to round to nearest whole number.

   *Note Int Intrinsic::, for how to truncate and then convert number
to `INTEGER'.


File: g77,  Node: Alarm Intrinsic,  Next: All Intrinsic,  Prev: AInt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.10 Alarm Intrinsic
..........................

     CALL Alarm(SECONDS, HANDLER, STATUS)

SECONDS: `INTEGER'; scalar; INTENT(IN).

HANDLER: Signal handler (`INTEGER FUNCTION' or `SUBROUTINE') or
dummy/global `INTEGER(KIND=1)' scalar.

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Causes external subroutine HANDLER to be executed after a delay of
SECONDS seconds by using `alarm(1)' to set up a signal and `signal(2)'
to catch it.  If STATUS is supplied, it will be returned with the
number of seconds remaining until any previously scheduled alarm was
due to be delivered, or zero if there was no previously scheduled alarm.
*Note Signal Intrinsic (subroutine)::.


File: g77,  Node: All Intrinsic,  Next: Allocated Intrinsic,  Prev: Alarm Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.11 All Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL All' to use this name for an
external procedure.


File: g77,  Node: Allocated Intrinsic,  Next: ALog Intrinsic,  Prev: All Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.12 Allocated Intrinsic
..............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Allocated' to use this name
for an external procedure.


File: g77,  Node: ALog Intrinsic,  Next: ALog10 Intrinsic,  Prev: Allocated Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.13 ALog Intrinsic
.........................

     ALog(X)

ALog: `REAL(KIND=1)' function.

X: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77,  Node: ALog10 Intrinsic,  Next: AMax0 Intrinsic,  Prev: ALog Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.14 ALog10 Intrinsic
...........................

     ALog10(X)

ALog10: `REAL(KIND=1)' function.

X: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG10()' that is specific to one type for X.  *Note
Log10 Intrinsic::.


File: g77,  Node: AMax0 Intrinsic,  Next: AMax1 Intrinsic,  Prev: ALog10 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.15 AMax0 Intrinsic
..........................

     AMax0(A-1, A-2, ..., A-n)

AMax0: `REAL(KIND=1)' function.

A: `INTEGER(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A and a
different return type.  *Note Max Intrinsic::.


File: g77,  Node: AMax1 Intrinsic,  Next: AMin0 Intrinsic,  Prev: AMax0 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.16 AMax1 Intrinsic
..........................

     AMax1(A-1, A-2, ..., A-n)

AMax1: `REAL(KIND=1)' function.

A: `REAL(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A.  *Note
Max Intrinsic::.


File: g77,  Node: AMin0 Intrinsic,  Next: AMin1 Intrinsic,  Prev: AMax1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.17 AMin0 Intrinsic
..........................

     AMin0(A-1, A-2, ..., A-n)

AMin0: `REAL(KIND=1)' function.

A: `INTEGER(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A and a
different return type.  *Note Min Intrinsic::.


File: g77,  Node: AMin1 Intrinsic,  Next: AMod Intrinsic,  Prev: AMin0 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.18 AMin1 Intrinsic
..........................

     AMin1(A-1, A-2, ..., A-n)

AMin1: `REAL(KIND=1)' function.

A: `REAL(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A.  *Note
Min Intrinsic::.


File: g77,  Node: AMod Intrinsic,  Next: And Intrinsic,  Prev: AMin1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.19 AMod Intrinsic
.........................

     AMod(A, P)

AMod: `REAL(KIND=1)' function.

A: `REAL(KIND=1)'; scalar; INTENT(IN).

P: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MOD()' that is specific to one type for A.  *Note
Mod Intrinsic::.


File: g77,  Node: And Intrinsic,  Next: ANInt Intrinsic,  Prev: AMod Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.20 And Intrinsic
........................

     And(I, J)

And: `INTEGER' or `LOGICAL' function, the exact type being the result
of cross-promoting the types of all the arguments.

I: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

J: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns value resulting from boolean AND of pair of bits in each of
I and J.


File: g77,  Node: ANInt Intrinsic,  Next: Any Intrinsic,  Prev: And Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.21 ANInt Intrinsic
..........................

     ANInt(A)

ANInt: `REAL' function, the `KIND=' value of the type being that of
argument A.

A: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A with the fractional portion of its magnitude eliminated by
rounding to the nearest whole number and with its sign preserved.

   A fractional portion exactly equal to `.5' is rounded to the whole
number that is larger in magnitude.  (Also called "Fortran round".)

   *Note AInt Intrinsic::, for how to truncate to whole number.

   *Note NInt Intrinsic::, for how to round and then convert number to
`INTEGER'.


File: g77,  Node: Any Intrinsic,  Next: ASin Intrinsic,  Prev: ANInt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.22 Any Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Any' to use this name for an
external procedure.


File: g77,  Node: ASin Intrinsic,  Next: Associated Intrinsic,  Prev: Any Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.23 ASin Intrinsic
.........................

     ASin(X)

ASin: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the arc-sine (inverse sine) of X in radians.

   *Note Sin Intrinsic::, for the inverse of this function.


File: g77,  Node: Associated Intrinsic,  Next: ATan Intrinsic,  Prev: ASin Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.24 Associated Intrinsic
...............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Associated' to use this name
for an external procedure.


File: g77,  Node: ATan Intrinsic,  Next: ATan2 Intrinsic,  Prev: Associated Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.25 ATan Intrinsic
.........................

     ATan(X)

ATan: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the arc-tangent (inverse tangent) of X in radians.

   *Note Tan Intrinsic::, for the inverse of this function.


File: g77,  Node: ATan2 Intrinsic,  Next: BesJ0 Intrinsic,  Prev: ATan Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.26 ATan2 Intrinsic
..........................

     ATan2(Y, X)

ATan2: `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

Y: `REAL'; scalar; INTENT(IN).

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the arc-tangent (inverse tangent) of the complex number (Y,
X) in radians.

   *Note Tan Intrinsic::, for the inverse of this function.


File: g77,  Node: BesJ0 Intrinsic,  Next: BesJ1 Intrinsic,  Prev: ATan2 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.27 BesJ0 Intrinsic
..........................

     BesJ0(X)

BesJ0: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the first kind of order 0 of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77,  Node: BesJ1 Intrinsic,  Next: BesJN Intrinsic,  Prev: BesJ0 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.28 BesJ1 Intrinsic
..........................

     BesJ1(X)

BesJ1: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the first kind of order 1 of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77,  Node: BesJN Intrinsic,  Next: BesY0 Intrinsic,  Prev: BesJ1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.29 BesJN Intrinsic
..........................

     BesJN(N, X)

BesJN: `REAL' function, the `KIND=' value of the type being that of
argument X.

N: `INTEGER'; scalar; INTENT(IN).

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the first kind of order N of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77,  Node: BesY0 Intrinsic,  Next: BesY1 Intrinsic,  Prev: BesJN Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.30 BesY0 Intrinsic
..........................

     BesY0(X)

BesY0: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the second kind of order 0 of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77,  Node: BesY1 Intrinsic,  Next: BesYN Intrinsic,  Prev: BesY0 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.31 BesY1 Intrinsic
..........................

     BesY1(X)

BesY1: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the second kind of order 1 of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77,  Node: BesYN Intrinsic,  Next: Bit_Size Intrinsic,  Prev: BesY1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.32 BesYN Intrinsic
..........................

     BesYN(N, X)

BesYN: `REAL' function, the `KIND=' value of the type being that of
argument X.

N: `INTEGER'; scalar; INTENT(IN).

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Calculates the Bessel function of the second kind of order N of X.
See `bessel(3m)', on whose implementation the function depends.


File: g77,  Node: Bit_Size Intrinsic,  Next: BTest Intrinsic,  Prev: BesYN Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.33 Bit_Size Intrinsic
.............................

     Bit_Size(I)

Bit_Size: `INTEGER' function, the `KIND=' value of the type being that
of argument I.

I: `INTEGER'; scalar.

Intrinsic groups: `f90'.

Description:

   Returns the number of bits (integer precision plus sign bit)
represented by the type for I.

   *Note BTest Intrinsic::, for how to test the value of a bit in a
variable or array.

   *Note IBSet Intrinsic::, for how to set a bit in a variable to 1.

   *Note IBClr Intrinsic::, for how to set a bit in a variable to 0.


File: g77,  Node: BTest Intrinsic,  Next: CAbs Intrinsic,  Prev: Bit_Size Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.34 BTest Intrinsic
..........................

     BTest(I, POS)

BTest: `LOGICAL(KIND=1)' function.

I: `INTEGER'; scalar; INTENT(IN).

POS: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns `.TRUE.' if bit POS in I is 1, `.FALSE.' otherwise.

   (Bit 0 is the low-order (rightmost) bit, adding the value 2**0, or 1,
to the number if set to 1; bit 1 is the next-higher-order bit, adding
2**1, or 2; bit 2 adds 2**2, or 4; and so on.)

   *Note Bit_Size Intrinsic::, for how to obtain the number of bits in
a type.  The leftmost bit of I is `BIT_SIZE(I-1)'.


File: g77,  Node: CAbs Intrinsic,  Next: CCos Intrinsic,  Prev: BTest Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.35 CAbs Intrinsic
.........................

     CAbs(A)

CAbs: `REAL(KIND=1)' function.

A: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77,  Node: CCos Intrinsic,  Next: Ceiling Intrinsic,  Prev: CAbs Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.36 CCos Intrinsic
.........................

     CCos(X)

CCos: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `COS()' that is specific to one type for X.  *Note
Cos Intrinsic::.


File: g77,  Node: Ceiling Intrinsic,  Next: CExp Intrinsic,  Prev: CCos Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.37 Ceiling Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Ceiling' to use this name for
an external procedure.


File: g77,  Node: CExp Intrinsic,  Next: Char Intrinsic,  Prev: Ceiling Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.38 CExp Intrinsic
.........................

     CExp(X)

CExp: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `EXP()' that is specific to one type for X.  *Note
Exp Intrinsic::.


File: g77,  Node: Char Intrinsic,  Next: ChDir Intrinsic (subroutine),  Prev: CExp Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.39 Char Intrinsic
.........................

     Char(I)

Char: `CHARACTER*1' function.

I: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the character corresponding to the code specified by I,
using the system's native character set.

   Because the system's native character set is used, the
correspondence between character and their codes is not necessarily the
same between GNU Fortran implementations.

   Note that no intrinsic exists to convert a numerical value to a
printable character string.  For example, there is no intrinsic that,
given an `INTEGER' or `REAL' argument with the value `154', returns the
`CHARACTER' result `'154''.

   Instead, you can use internal-file I/O to do this kind of conversion.
For example:

     INTEGER VALUE
     CHARACTER*10 STRING
     VALUE = 154
     WRITE (STRING, '(I10)'), VALUE
     PRINT *, STRING
     END

   The above program, when run, prints:

             154

   *Note IChar Intrinsic::, for the inverse of the `CHAR' function.

   *Note AChar Intrinsic::, for the function corresponding to the ASCII
character set.


File: g77,  Node: ChDir Intrinsic (subroutine),  Next: ChMod Intrinsic (subroutine),  Prev: Char Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.40 ChDir Intrinsic (subroutine)
.......................................

     CALL ChDir(DIR, STATUS)

DIR: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets the current working directory to be DIR.  If the STATUS
argument is supplied, it contains 0 on success or a non-zero error code
otherwise upon return.  See `chdir(3)'.

   _Caution:_ Using this routine during I/O to a unit connected with a
non-absolute file name can cause subsequent I/O on such a unit to fail
because the I/O library might reopen files by name.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note ChDir
Intrinsic (function)::.


File: g77,  Node: ChMod Intrinsic (subroutine),  Next: CLog Intrinsic,  Prev: ChDir Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.41 ChMod Intrinsic (subroutine)
.......................................

     CALL ChMod(NAME, MODE, STATUS)

NAME: `CHARACTER'; scalar; INTENT(IN).

MODE: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Changes the access mode of file NAME according to the specification
MODE, which is given in the format of `chmod(1)'.  A null character
(`CHAR(0)') marks the end of the name in NAME--otherwise, trailing
blanks in NAME are ignored.  Currently, NAME must not contain the
single quote character.

   If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return.

   Note that this currently works by actually invoking `/bin/chmod' (or
the `chmod' found when the library was configured) and so might fail in
some circumstances and will, anyway, be slow.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note ChMod
Intrinsic (function)::.


File: g77,  Node: CLog Intrinsic,  Next: Cmplx Intrinsic,  Prev: ChMod Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.42 CLog Intrinsic
.........................

     CLog(X)

CLog: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77,  Node: Cmplx Intrinsic,  Next: Complex Intrinsic,  Prev: CLog Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.43 Cmplx Intrinsic
..........................

     Cmplx(X, Y)

Cmplx: `COMPLEX(KIND=1)' function.

X: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Y: `INTEGER' or `REAL'; OPTIONAL (must be omitted if X is `COMPLEX');
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   If X is not type `COMPLEX', constructs a value of type
`COMPLEX(KIND=1)' from the real and imaginary values specified by X and
Y, respectively.  If Y is omitted, `0.' is assumed.

   If X is type `COMPLEX', converts it to type `COMPLEX(KIND=1)'.

   *Note Complex Intrinsic::, for information on easily constructing a
`COMPLEX' value of arbitrary precision from `REAL' arguments.


File: g77,  Node: Complex Intrinsic,  Next: Conjg Intrinsic,  Prev: Cmplx Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.44 Complex Intrinsic
............................

     Complex(REAL, IMAG)

Complex: `COMPLEX' function, the exact type being the result of
cross-promoting the types of all the arguments.

REAL: `INTEGER' or `REAL'; scalar; INTENT(IN).

IMAG: `INTEGER' or `REAL'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   Returns a `COMPLEX' value that has `Real' and `Imag' as its real and
imaginary parts, respectively.

   If REAL and IMAG are the same type, and that type is not `INTEGER',
no data conversion is performed, and the type of the resulting value
has the same kind value as the types of REAL and IMAG.

   If REAL and IMAG are not the same type, the usual type-promotion
rules are applied to both, converting either or both to the appropriate
`REAL' type.  The type of the resulting value has the same kind value
as the type to which both REAL and IMAG were converted, in this case.

   If REAL and IMAG are both `INTEGER', they are both converted to
`REAL(KIND=1)', and the result of the `COMPLEX()' invocation is type
`COMPLEX(KIND=1)'.

   _Note:_ The way to do this in standard Fortran 90 is too hairy to
describe here, but it is important to note that `CMPLX(D1,D2)' returns
a `COMPLEX(KIND=1)' result even if `D1' and `D2' are type
`REAL(KIND=2)'.  Hence the availability of `COMPLEX()' in GNU Fortran.


File: g77,  Node: Conjg Intrinsic,  Next: Cos Intrinsic,  Prev: Complex Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.45 Conjg Intrinsic
..........................

     Conjg(Z)

Conjg: `COMPLEX' function, the `KIND=' value of the type being that of
argument Z.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the complex conjugate:

     COMPLEX(REALPART(Z), -IMAGPART(Z))


File: g77,  Node: Cos Intrinsic,  Next: CosH Intrinsic,  Prev: Conjg Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.46 Cos Intrinsic
........................

     Cos(X)

Cos: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the cosine of X, an angle measured in radians.

   *Note ACos Intrinsic::, for the inverse of this function.


File: g77,  Node: CosH Intrinsic,  Next: Count Intrinsic,  Prev: Cos Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.47 CosH Intrinsic
.........................

     CosH(X)

CosH: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the hyperbolic cosine of X.


File: g77,  Node: Count Intrinsic,  Next: CPU_Time Intrinsic,  Prev: CosH Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.48 Count Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Count' to use this name for an
external procedure.


File: g77,  Node: CPU_Time Intrinsic,  Next: CShift Intrinsic,  Prev: Count Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.49 CPU_Time Intrinsic
.............................

     CALL CPU_Time(SECONDS)

SECONDS: `REAL'; scalar; INTENT(OUT).

Intrinsic groups: `f90'.

Description:

   Returns in SECONDS the current value of the system time.  This
implementation of the Fortran 95 intrinsic is just an alias for
`second' *Note Second Intrinsic (subroutine)::.

   On some systems, the underlying timings are represented using types
with sufficiently small limits that overflows (wraparounds) are
possible, such as 32-bit types.  Therefore, the values returned by this
intrinsic might be, or become, negative, or numerically less than
previous values, during a single run of the compiled program.


File: g77,  Node: CShift Intrinsic,  Next: CSin Intrinsic,  Prev: CPU_Time Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.50 CShift Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL CShift' to use this name for an
external procedure.


File: g77,  Node: CSin Intrinsic,  Next: CSqRt Intrinsic,  Prev: CShift Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.51 CSin Intrinsic
.........................

     CSin(X)

CSin: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SIN()' that is specific to one type for X.  *Note
Sin Intrinsic::.


File: g77,  Node: CSqRt Intrinsic,  Next: CTime Intrinsic (subroutine),  Prev: CSin Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.52 CSqRt Intrinsic
..........................

     CSqRt(X)

CSqRt: `COMPLEX(KIND=1)' function.

X: `COMPLEX(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SQRT()' that is specific to one type for X.  *Note
SqRt Intrinsic::.


File: g77,  Node: CTime Intrinsic (subroutine),  Next: CTime Intrinsic (function),  Prev: CSqRt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.53 CTime Intrinsic (subroutine)
.......................................

     CALL CTime(STIME, RESULT)

STIME: `INTEGER'; scalar; INTENT(IN).

RESULT: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Converts STIME, a system time value, such as returned by `TIME8()',
to a string of the form `Sat Aug 19 18:13:14 1995', and returns that
string in RESULT.

   *Note Time8 Intrinsic::.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note CTime
Intrinsic (function)::.


File: g77,  Node: CTime Intrinsic (function),  Next: DAbs Intrinsic,  Prev: CTime Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.54 CTime Intrinsic (function)
.....................................

     CTime(STIME)

CTime: `CHARACTER*(*)' function.

STIME: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Converts STIME, a system time value, such as returned by `TIME8()',
to a string of the form `Sat Aug 19 18:13:14 1995', and returns that
string as the function value.

   *Note Time8 Intrinsic::.

   For information on other intrinsics with the same name: *Note CTime
Intrinsic (subroutine)::.


File: g77,  Node: DAbs Intrinsic,  Next: DACos Intrinsic,  Prev: CTime Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.55 DAbs Intrinsic
.........................

     DAbs(A)

DAbs: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77,  Node: DACos Intrinsic,  Next: DASin Intrinsic,  Prev: DAbs Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.56 DACos Intrinsic
..........................

     DACos(X)

DACos: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ACOS()' that is specific to one type for X.  *Note
ACos Intrinsic::.


File: g77,  Node: DASin Intrinsic,  Next: DATan Intrinsic,  Prev: DACos Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.57 DASin Intrinsic
..........................

     DASin(X)

DASin: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ASIN()' that is specific to one type for X.  *Note
ASin Intrinsic::.


File: g77,  Node: DATan Intrinsic,  Next: DATan2 Intrinsic,  Prev: DASin Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.58 DATan Intrinsic
..........................

     DATan(X)

DATan: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ATAN()' that is specific to one type for X.  *Note
ATan Intrinsic::.


File: g77,  Node: DATan2 Intrinsic,  Next: Date_and_Time Intrinsic,  Prev: DATan Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.59 DATan2 Intrinsic
...........................

     DATan2(Y, X)

DATan2: `REAL(KIND=2)' function.

Y: `REAL(KIND=2)'; scalar; INTENT(IN).

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ATAN2()' that is specific to one type for Y and X.
*Note ATan2 Intrinsic::.


File: g77,  Node: Date_and_Time Intrinsic,  Next: DbesJ0 Intrinsic,  Prev: DATan2 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.60 Date_and_Time Intrinsic
..................................

     CALL Date_and_Time(DATE, TIME, ZONE, VALUES)

DATE: `CHARACTER'; scalar; INTENT(OUT).

TIME: `CHARACTER'; OPTIONAL; scalar; INTENT(OUT).

ZONE: `CHARACTER'; OPTIONAL; scalar; INTENT(OUT).

VALUES: `INTEGER(KIND=1)'; OPTIONAL; DIMENSION(8); INTENT(OUT).

Intrinsic groups: `f90'.

Description:

   Returns:
DATE
     The date in the form CCYYMMDD: century, year, month and day;

TIME
     The time in the form `HHMMSS.SS': hours, minutes, seconds and
     milliseconds;

ZONE
     The difference between local time and UTC (GMT) in the form SHHMM:
     sign, hours and minutes, e.g. `-0500' (winter in New York);

VALUES
     The year, month of the year, day of the month, time difference in
     minutes from UTC, hour of the day, minutes of the hour, seconds of
     the minute, and milliseconds of the second in successive values of
     the array.

   Programs making use of this intrinsic might not be Year 10000 (Y10K)
compliant.  For example, the date might appear, to such programs, to
wrap around (change from a larger value to a smaller one) as of the
Year 10000.

   On systems where a millisecond timer isn't available, the millisecond
value is returned as zero.


File: g77,  Node: DbesJ0 Intrinsic,  Next: DbesJ1 Intrinsic,  Prev: Date_and_Time Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.61 DbesJ0 Intrinsic
...........................

     DbesJ0(X)

DbesJ0: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESJ0()' that is specific to one type for X.  *Note
BesJ0 Intrinsic::.


File: g77,  Node: DbesJ1 Intrinsic,  Next: DbesJN Intrinsic,  Prev: DbesJ0 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.62 DbesJ1 Intrinsic
...........................

     DbesJ1(X)

DbesJ1: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESJ1()' that is specific to one type for X.  *Note
BesJ1 Intrinsic::.


File: g77,  Node: DbesJN Intrinsic,  Next: DbesY0 Intrinsic,  Prev: DbesJ1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.63 DbesJN Intrinsic
...........................

     DbesJN(N, X)

DbesJN: `REAL(KIND=2)' function.

N: `INTEGER'; scalar; INTENT(IN).

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESJN()' that is specific to one type for X.  *Note
BesJN Intrinsic::.


File: g77,  Node: DbesY0 Intrinsic,  Next: DbesY1 Intrinsic,  Prev: DbesJN Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.64 DbesY0 Intrinsic
...........................

     DbesY0(X)

DbesY0: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESY0()' that is specific to one type for X.  *Note
BesY0 Intrinsic::.


File: g77,  Node: DbesY1 Intrinsic,  Next: DbesYN Intrinsic,  Prev: DbesY0 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.65 DbesY1 Intrinsic
...........................

     DbesY1(X)

DbesY1: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESY1()' that is specific to one type for X.  *Note
BesY1 Intrinsic::.


File: g77,  Node: DbesYN Intrinsic,  Next: Dble Intrinsic,  Prev: DbesY1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.66 DbesYN Intrinsic
...........................

     DbesYN(N, X)

DbesYN: `REAL(KIND=2)' function.

N: `INTEGER'; scalar; INTENT(IN).

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `BESYN()' that is specific to one type for X.  *Note
BesYN Intrinsic::.


File: g77,  Node: Dble Intrinsic,  Next: DCos Intrinsic,  Prev: DbesYN Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.67 Dble Intrinsic
.........................

     Dble(A)

Dble: `REAL(KIND=2)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A converted to double precision (`REAL(KIND=2)').  If A is
`COMPLEX', the real part of A is used for the conversion and the
imaginary part disregarded.

   *Note Sngl Intrinsic::, for the function that converts to single
precision.

   *Note Int Intrinsic::, for the function that converts to `INTEGER'.

   *Note Complex Intrinsic::, for the function that converts to
`COMPLEX'.


File: g77,  Node: DCos Intrinsic,  Next: DCosH Intrinsic,  Prev: Dble Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.68 DCos Intrinsic
.........................

     DCos(X)

DCos: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `COS()' that is specific to one type for X.  *Note
Cos Intrinsic::.


File: g77,  Node: DCosH Intrinsic,  Next: DDiM Intrinsic,  Prev: DCos Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.69 DCosH Intrinsic
..........................

     DCosH(X)

DCosH: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `COSH()' that is specific to one type for X.  *Note
CosH Intrinsic::.


File: g77,  Node: DDiM Intrinsic,  Next: DErF Intrinsic,  Prev: DCosH Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.70 DDiM Intrinsic
.........................

     DDiM(X, Y)

DDiM: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Y: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `DIM()' that is specific to one type for X and Y.
*Note DiM Intrinsic::.


File: g77,  Node: DErF Intrinsic,  Next: DErFC Intrinsic,  Prev: DDiM Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.71 DErF Intrinsic
.........................

     DErF(X)

DErF: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `ERF()' that is specific to one type for X.  *Note
ErF Intrinsic::.


File: g77,  Node: DErFC Intrinsic,  Next: DExp Intrinsic,  Prev: DErF Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.72 DErFC Intrinsic
..........................

     DErFC(X)

DErFC: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `ERFC()' that is specific to one type for X.  *Note
ErFC Intrinsic::.


File: g77,  Node: DExp Intrinsic,  Next: Digits Intrinsic,  Prev: DErFC Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.73 DExp Intrinsic
.........................

     DExp(X)

DExp: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `EXP()' that is specific to one type for X.  *Note
Exp Intrinsic::.


File: g77,  Node: Digits Intrinsic,  Next: DiM Intrinsic,  Prev: DExp Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.74 Digits Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Digits' to use this name for an
external procedure.


File: g77,  Node: DiM Intrinsic,  Next: DInt Intrinsic,  Prev: Digits Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.75 DiM Intrinsic
........................

     DiM(X, Y)

DiM: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

X: `INTEGER' or `REAL'; scalar; INTENT(IN).

Y: `INTEGER' or `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `X-Y' if X is greater than Y; otherwise returns zero.


File: g77,  Node: DInt Intrinsic,  Next: DLog Intrinsic,  Prev: DiM Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.76 DInt Intrinsic
.........................

     DInt(A)

DInt: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `AINT()' that is specific to one type for A.  *Note
AInt Intrinsic::.


File: g77,  Node: DLog Intrinsic,  Next: DLog10 Intrinsic,  Prev: DInt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.77 DLog Intrinsic
.........................

     DLog(X)

DLog: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77,  Node: DLog10 Intrinsic,  Next: DMax1 Intrinsic,  Prev: DLog Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.78 DLog10 Intrinsic
...........................

     DLog10(X)

DLog10: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `LOG10()' that is specific to one type for X.  *Note
Log10 Intrinsic::.


File: g77,  Node: DMax1 Intrinsic,  Next: DMin1 Intrinsic,  Prev: DLog10 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.79 DMax1 Intrinsic
..........................

     DMax1(A-1, A-2, ..., A-n)

DMax1: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A.  *Note
Max Intrinsic::.


File: g77,  Node: DMin1 Intrinsic,  Next: DMod Intrinsic,  Prev: DMax1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.80 DMin1 Intrinsic
..........................

     DMin1(A-1, A-2, ..., A-n)

DMin1: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A.  *Note
Min Intrinsic::.


File: g77,  Node: DMod Intrinsic,  Next: DNInt Intrinsic,  Prev: DMin1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.81 DMod Intrinsic
.........................

     DMod(A, P)

DMod: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

P: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MOD()' that is specific to one type for A.  *Note
Mod Intrinsic::.


File: g77,  Node: DNInt Intrinsic,  Next: Dot_Product Intrinsic,  Prev: DMod Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.82 DNInt Intrinsic
..........................

     DNInt(A)

DNInt: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ANINT()' that is specific to one type for A.  *Note
ANInt Intrinsic::.


File: g77,  Node: Dot_Product Intrinsic,  Next: DProd Intrinsic,  Prev: DNInt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.83 Dot_Product Intrinsic
................................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Dot_Product' to use this name
for an external procedure.


File: g77,  Node: DProd Intrinsic,  Next: DSign Intrinsic,  Prev: Dot_Product Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.84 DProd Intrinsic
..........................

     DProd(X, Y)

DProd: `REAL(KIND=2)' function.

X: `REAL(KIND=1)'; scalar; INTENT(IN).

Y: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `DBLE(X)*DBLE(Y)'.


File: g77,  Node: DSign Intrinsic,  Next: DSin Intrinsic,  Prev: DProd Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.85 DSign Intrinsic
..........................

     DSign(A, B)

DSign: `REAL(KIND=2)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

B: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SIGN()' that is specific to one type for A and B.
*Note Sign Intrinsic::.


File: g77,  Node: DSin Intrinsic,  Next: DSinH Intrinsic,  Prev: DSign Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.86 DSin Intrinsic
.........................

     DSin(X)

DSin: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SIN()' that is specific to one type for X.  *Note
Sin Intrinsic::.


File: g77,  Node: DSinH Intrinsic,  Next: DSqRt Intrinsic,  Prev: DSin Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.87 DSinH Intrinsic
..........................

     DSinH(X)

DSinH: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SINH()' that is specific to one type for X.  *Note
SinH Intrinsic::.


File: g77,  Node: DSqRt Intrinsic,  Next: DTan Intrinsic,  Prev: DSinH Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.88 DSqRt Intrinsic
..........................

     DSqRt(X)

DSqRt: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SQRT()' that is specific to one type for X.  *Note
SqRt Intrinsic::.


File: g77,  Node: DTan Intrinsic,  Next: DTanH Intrinsic,  Prev: DSqRt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.89 DTan Intrinsic
.........................

     DTan(X)

DTan: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `TAN()' that is specific to one type for X.  *Note
Tan Intrinsic::.


File: g77,  Node: DTanH Intrinsic,  Next: DTime Intrinsic (subroutine),  Prev: DTan Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.90 DTanH Intrinsic
..........................

     DTanH(X)

DTanH: `REAL(KIND=2)' function.

X: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `TANH()' that is specific to one type for X.  *Note
TanH Intrinsic::.


File: g77,  Node: DTime Intrinsic (subroutine),  Next: EOShift Intrinsic,  Prev: DTanH Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.91 DTime Intrinsic (subroutine)
.......................................

     CALL DTime(TARRAY, RESULT)

TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT).

RESULT: `REAL(KIND=1)'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Initially, return the number of seconds of runtime since the start
of the process's execution in RESULT, and the user and system
components of this in `TARRAY(1)' and `TARRAY(2)' respectively.  The
value of RESULT is equal to `TARRAY(1) + TARRAY(2)'.

   Subsequent invocations of `DTIME()' set values based on accumulations
since the previous invocation.

   On some systems, the underlying timings are represented using types
with sufficiently small limits that overflows (wraparounds) are
possible, such as 32-bit types.  Therefore, the values returned by this
intrinsic might be, or become, negative, or numerically less than
previous values, during a single run of the compiled program.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note DTime
Intrinsic (function)::.


File: g77,  Node: EOShift Intrinsic,  Next: Epsilon Intrinsic,  Prev: DTime Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.92 EOShift Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL EOShift' to use this name for
an external procedure.


File: g77,  Node: Epsilon Intrinsic,  Next: ErF Intrinsic,  Prev: EOShift Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.93 Epsilon Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Epsilon' to use this name for
an external procedure.


File: g77,  Node: ErF Intrinsic,  Next: ErFC Intrinsic,  Prev: Epsilon Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.94 ErF Intrinsic
........................

     ErF(X)

ErF: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the error function of X.  See `erf(3m)', which provides the
implementation.


File: g77,  Node: ErFC Intrinsic,  Next: ETime Intrinsic (subroutine),  Prev: ErF Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.95 ErFC Intrinsic
.........................

     ErFC(X)

ErFC: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the complementary error function of X: `ERFC(R) = 1 -
ERF(R)' (except that the result might be more accurate than explicitly
evaluating that formulae would give).  See `erfc(3m)', which provides
the implementation.


File: g77,  Node: ETime Intrinsic (subroutine),  Next: ETime Intrinsic (function),  Prev: ErFC Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.96 ETime Intrinsic (subroutine)
.......................................

     CALL ETime(TARRAY, RESULT)

TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT).

RESULT: `REAL(KIND=1)'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Return the number of seconds of runtime since the start of the
process's execution in RESULT, and the user and system components of
this in `TARRAY(1)' and `TARRAY(2)' respectively.  The value of RESULT
is equal to `TARRAY(1) + TARRAY(2)'.

   On some systems, the underlying timings are represented using types
with sufficiently small limits that overflows (wraparounds) are
possible, such as 32-bit types.  Therefore, the values returned by this
intrinsic might be, or become, negative, or numerically less than
previous values, during a single run of the compiled program.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note ETime
Intrinsic (function)::.


File: g77,  Node: ETime Intrinsic (function),  Next: Exit Intrinsic,  Prev: ETime Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.97 ETime Intrinsic (function)
.....................................

     ETime(TARRAY)

ETime: `REAL(KIND=1)' function.

TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Return the number of seconds of runtime since the start of the
process's execution as the function value, and the user and system
components of this in `TARRAY(1)' and `TARRAY(2)' respectively.  The
functions' value is equal to `TARRAY(1) + TARRAY(2)'.

   On some systems, the underlying timings are represented using types
with sufficiently small limits that overflows (wraparounds) are
possible, such as 32-bit types.  Therefore, the values returned by this
intrinsic might be, or become, negative, or numerically less than
previous values, during a single run of the compiled program.

   For information on other intrinsics with the same name: *Note ETime
Intrinsic (subroutine)::.


File: g77,  Node: Exit Intrinsic,  Next: Exp Intrinsic,  Prev: ETime Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.98 Exit Intrinsic
.........................

     CALL Exit(STATUS)

STATUS: `INTEGER'; OPTIONAL; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Exit the program with status STATUS after closing open Fortran I/O
units and otherwise behaving as `exit(2)'.  If STATUS is omitted the
canonical `success' value will be returned to the system.


File: g77,  Node: Exp Intrinsic,  Next: Exponent Intrinsic,  Prev: Exit Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.99 Exp Intrinsic
........................

     Exp(X)

Exp: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `E**X', where E is approximately 2.7182818.

   *Note Log Intrinsic::, for the inverse of this function.


File: g77,  Node: Exponent Intrinsic,  Next: FDate Intrinsic (subroutine),  Prev: Exp Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.100 Exponent Intrinsic
..............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Exponent' to use this name for
an external procedure.


File: g77,  Node: FDate Intrinsic (subroutine),  Next: FDate Intrinsic (function),  Prev: Exponent Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.101 FDate Intrinsic (subroutine)
........................................

     CALL FDate(DATE)

DATE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the current date (using the same format as `CTIME()') in
DATE.

   Equivalent to:

     CALL CTIME(DATE, TIME8())

   Programs making use of this intrinsic might not be Year 10000 (Y10K)
compliant.  For example, the date might appear, to such programs, to
wrap around (change from a larger value to a smaller one) as of the
Year 10000.

   *Note CTime Intrinsic (subroutine)::.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note FDate
Intrinsic (function)::.


File: g77,  Node: FDate Intrinsic (function),  Next: FGet Intrinsic (subroutine),  Prev: FDate Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.102 FDate Intrinsic (function)
......................................

     FDate()

FDate: `CHARACTER*(*)' function.

Intrinsic groups: `unix'.

Description:

   Returns the current date (using the same format as `CTIME()').

   Equivalent to:

     CTIME(TIME8())

   Programs making use of this intrinsic might not be Year 10000 (Y10K)
compliant.  For example, the date might appear, to such programs, to
wrap around (change from a larger value to a smaller one) as of the
Year 10000.

   *Note CTime Intrinsic (function)::.

   For information on other intrinsics with the same name: *Note FDate
Intrinsic (subroutine)::.


File: g77,  Node: FGet Intrinsic (subroutine),  Next: FGetC Intrinsic (subroutine),  Prev: FDate Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.103 FGet Intrinsic (subroutine)
.......................................

     CALL FGet(C, STATUS)

C: `CHARACTER'; scalar; INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Reads a single character into C in stream mode from unit 5
(by-passing normal formatted output) using `getc(3)'.  Returns in
STATUS 0 on success, -1 on end-of-file, and the error code from
`ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FGet
Intrinsic (function)::.


File: g77,  Node: FGetC Intrinsic (subroutine),  Next: Float Intrinsic,  Prev: FGet Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.104 FGetC Intrinsic (subroutine)
........................................

     CALL FGetC(UNIT, C, STATUS)

UNIT: `INTEGER'; scalar; INTENT(IN).

C: `CHARACTER'; scalar; INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Reads a single character into C in stream mode from unit UNIT
(by-passing normal formatted output) using `getc(3)'.  Returns in
STATUS 0 on success, -1 on end-of-file, and the error code from
`ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FGetC
Intrinsic (function)::.


File: g77,  Node: Float Intrinsic,  Next: Floor Intrinsic,  Prev: FGetC Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.105 Float Intrinsic
...........................

     Float(A)

Float: `REAL(KIND=1)' function.

A: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `REAL()' that is specific to one type for A.  *Note
Real Intrinsic::.


File: g77,  Node: Floor Intrinsic,  Next: Flush Intrinsic,  Prev: Float Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.106 Floor Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Floor' to use this name for an
external procedure.


File: g77,  Node: Flush Intrinsic,  Next: FNum Intrinsic,  Prev: Floor Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.107 Flush Intrinsic
...........................

     CALL Flush(UNIT)

UNIT: `INTEGER'; OPTIONAL; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Flushes Fortran unit(s) currently open for output.  Without the
optional argument, all such units are flushed, otherwise just the unit
specified by UNIT.

   Some non-GNU implementations of Fortran provide this intrinsic as a
library procedure that might or might not support the (optional) UNIT
argument.


File: g77,  Node: FNum Intrinsic,  Next: FPut Intrinsic (subroutine),  Prev: Flush Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.108 FNum Intrinsic
..........................

     FNum(UNIT)

FNum: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the Unix file descriptor number corresponding to the open
Fortran I/O unit UNIT.  This could be passed to an interface to C I/O
routines.


File: g77,  Node: FPut Intrinsic (subroutine),  Next: FPutC Intrinsic (subroutine),  Prev: FNum Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.109 FPut Intrinsic (subroutine)
.......................................

     CALL FPut(C, STATUS)

C: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Writes the single character C in stream mode to unit 6 (by-passing
normal formatted output) using `putc(3)'.  Returns in STATUS 0 on
success, the error code from `ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FPut
Intrinsic (function)::.


File: g77,  Node: FPutC Intrinsic (subroutine),  Next: Fraction Intrinsic,  Prev: FPut Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.110 FPutC Intrinsic (subroutine)
........................................

     CALL FPutC(UNIT, C, STATUS)

UNIT: `INTEGER'; scalar; INTENT(IN).

C: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Writes the single character UNIT in stream mode to unit 6
(by-passing normal formatted output) using `putc(3)'.  Returns in C 0
on success, the error code from `ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FPutC
Intrinsic (function)::.


File: g77,  Node: Fraction Intrinsic,  Next: FSeek Intrinsic,  Prev: FPutC Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.111 Fraction Intrinsic
..............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Fraction' to use this name for
an external procedure.


File: g77,  Node: FSeek Intrinsic,  Next: FStat Intrinsic (subroutine),  Prev: Fraction Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.112 FSeek Intrinsic
...........................

     CALL FSeek(UNIT, OFFSET, WHENCE, ERRLAB)

UNIT: `INTEGER'; scalar; INTENT(IN).

OFFSET: `INTEGER'; scalar; INTENT(IN).

WHENCE: `INTEGER'; scalar; INTENT(IN).

ERRLAB: `*LABEL', where LABEL is the label of an executable statement;
OPTIONAL.

Intrinsic groups: `unix'.

Description:

   Attempts to move Fortran unit UNIT to the specified OFFSET: absolute
offset if WHENCE=0; relative to the current offset if WHENCE=1;
relative to the end of the file if WHENCE=2.  It branches to label
ERRLAB if UNIT is not open or if the call otherwise fails.


File: g77,  Node: FStat Intrinsic (subroutine),  Next: FStat Intrinsic (function),  Prev: FSeek Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.113 FStat Intrinsic (subroutine)
........................................

     CALL FStat(UNIT, SARRAY, STATUS)

UNIT: `INTEGER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the file open on Fortran I/O unit UNIT and places
them in the array SARRAY.  The values in this array are extracted from
the `stat' structure as returned by `fstat(2)' q.v., as follows:

  1. Device ID

  2. Inode number

  3. File mode

  4. Number of links

  5. Owner's uid

  6. Owner's gid

  7. ID of device containing directory entry for file (0 if not
     available)

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size (-1 if not available)

 13. Number of blocks allocated (-1 if not available)

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note FStat
Intrinsic (function)::.


File: g77,  Node: FStat Intrinsic (function),  Next: FTell Intrinsic (subroutine),  Prev: FStat Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.114 FStat Intrinsic (function)
......................................

     FStat(UNIT, SARRAY)

FStat: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the file open on Fortran I/O unit UNIT and places
them in the array SARRAY.  The values in this array are extracted from
the `stat' structure as returned by `fstat(2)' q.v., as follows:

  1. Device ID

  2. Inode number

  3. File mode

  4. Number of links

  5. Owner's uid

  6. Owner's gid

  7. ID of device containing directory entry for file (0 if not
     available)

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size (-1 if not available)

 13. Number of blocks allocated (-1 if not available)

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   Returns 0 on success or a non-zero error code.

   For information on other intrinsics with the same name: *Note FStat
Intrinsic (subroutine)::.


File: g77,  Node: FTell Intrinsic (subroutine),  Next: FTell Intrinsic (function),  Prev: FStat Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.115 FTell Intrinsic (subroutine)
........................................

     CALL FTell(UNIT, OFFSET)

UNIT: `INTEGER'; scalar; INTENT(IN).

OFFSET: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets OFFSET to the current offset of Fortran unit UNIT (or to -1 if
UNIT is not open).

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note FTell
Intrinsic (function)::.


File: g77,  Node: FTell Intrinsic (function),  Next: GError Intrinsic,  Prev: FTell Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.116 FTell Intrinsic (function)
......................................

     FTell(UNIT)

FTell: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the current offset of Fortran unit UNIT (or -1 if UNIT is
not open).

   For information on other intrinsics with the same name: *Note FTell
Intrinsic (subroutine)::.


File: g77,  Node: GError Intrinsic,  Next: GetArg Intrinsic,  Prev: FTell Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.117 GError Intrinsic
............................

     CALL GError(MESSAGE)

MESSAGE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the system error message corresponding to the last system
error (C `errno').


File: g77,  Node: GetArg Intrinsic,  Next: GetCWD Intrinsic (subroutine),  Prev: GError Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.118 GetArg Intrinsic
............................

     CALL GetArg(POS, VALUE)

POS: `INTEGER'; scalar; INTENT(IN).

VALUE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets VALUE to the POS-th command-line argument (or to all blanks if
there are fewer than VALUE command-line arguments); `CALL GETARG(0,
VALUE)' sets VALUE to the name of the program (on systems that support
this feature).

   *Note IArgC Intrinsic::, for information on how to get the number of
arguments.


File: g77,  Node: GetCWD Intrinsic (subroutine),  Next: GetCWD Intrinsic (function),  Prev: GetArg Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.119 GetCWD Intrinsic (subroutine)
.........................................

     CALL GetCWD(NAME, STATUS)

NAME: `CHARACTER'; scalar; INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Places the current working directory in NAME.  If the STATUS
argument is supplied, it contains 0 success or a non-zero error code
upon return (`ENOSYS' if the system does not provide `getcwd(3)' or
`getwd(3)').

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note GetCWD
Intrinsic (function)::.


File: g77,  Node: GetCWD Intrinsic (function),  Next: GetEnv Intrinsic,  Prev: GetCWD Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.120 GetCWD Intrinsic (function)
.......................................

     GetCWD(NAME)

GetCWD: `INTEGER(KIND=1)' function.

NAME: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Places the current working directory in NAME.  Returns 0 on success,
otherwise a non-zero error code (`ENOSYS' if the system does not
provide `getcwd(3)' or `getwd(3)').

   For information on other intrinsics with the same name: *Note GetCWD
Intrinsic (subroutine)::.


File: g77,  Node: GetEnv Intrinsic,  Next: GetGId Intrinsic,  Prev: GetCWD Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.121 GetEnv Intrinsic
............................

     CALL GetEnv(NAME, VALUE)

NAME: `CHARACTER'; scalar; INTENT(IN).

VALUE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets VALUE to the value of environment variable given by the value
of NAME (`$name' in shell terms) or to blanks if `$name' has not been
set.  A null character (`CHAR(0)') marks the end of the name in
NAME--otherwise, trailing blanks in NAME are ignored.


File: g77,  Node: GetGId Intrinsic,  Next: GetLog Intrinsic,  Prev: GetEnv Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.122 GetGId Intrinsic
............................

     GetGId()

GetGId: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the group id for the current process.


File: g77,  Node: GetLog Intrinsic,  Next: GetPId Intrinsic,  Prev: GetGId Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.123 GetLog Intrinsic
............................

     CALL GetLog(LOGIN)

LOGIN: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the login name for the process in LOGIN.

   _Caution:_ On some systems, the `getlogin(3)' function, which this
intrinsic calls at run time, is either not implemented or returns a
null pointer.  In the latter case, this intrinsic returns blanks in
LOGIN.


File: g77,  Node: GetPId Intrinsic,  Next: GetUId Intrinsic,  Prev: GetLog Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.124 GetPId Intrinsic
............................

     GetPId()

GetPId: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the process id for the current process.


File: g77,  Node: GetUId Intrinsic,  Next: GMTime Intrinsic,  Prev: GetPId Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.125 GetUId Intrinsic
............................

     GetUId()

GetUId: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the user id for the current process.


File: g77,  Node: GMTime Intrinsic,  Next: HostNm Intrinsic (subroutine),  Prev: GetUId Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.126 GMTime Intrinsic
............................

     CALL GMTime(STIME, TARRAY)

STIME: `INTEGER(KIND=1)'; scalar; INTENT(IN).

TARRAY: `INTEGER(KIND=1)'; DIMENSION(9); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Given a system time value STIME, fills TARRAY with values extracted
from it appropriate to the GMT time zone using `gmtime(3)'.

   The array elements are as follows:

  1. Seconds after the minute, range 0-59 or 0-61 to allow for leap
     seconds

  2. Minutes after the hour, range 0-59

  3. Hours past midnight, range 0-23

  4. Day of month, range 0-31

  5. Number of months since January, range 0-12

  6. Years since 1900

  7. Number of days since Sunday, range 0-6

  8. Days since January 1

  9. Daylight savings indicator: positive if daylight savings is in
     effect, zero if not, and negative if the information isn't
     available.


File: g77,  Node: HostNm Intrinsic (subroutine),  Next: HostNm Intrinsic (function),  Prev: GMTime Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.127 HostNm Intrinsic (subroutine)
.........................................

     CALL HostNm(NAME, STATUS)

NAME: `CHARACTER'; scalar; INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Fills NAME with the system's host name returned by `gethostname(2)'.
If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return (`ENOSYS' if the system does not
provide `gethostname(2)').

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   On some systems (specifically SCO) it might be necessary to link the
"socket" library if you call this routine.  Typically this means adding
`-lg2c -lsocket -lm' to the `g77' command line when linking the program.

   For information on other intrinsics with the same name: *Note HostNm
Intrinsic (function)::.


File: g77,  Node: HostNm Intrinsic (function),  Next: Huge Intrinsic,  Prev: HostNm Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.128 HostNm Intrinsic (function)
.......................................

     HostNm(NAME)

HostNm: `INTEGER(KIND=1)' function.

NAME: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Fills NAME with the system's host name returned by `gethostname(2)',
returning 0 on success or a non-zero error code (`ENOSYS' if the system
does not provide `gethostname(2)').

   On some systems (specifically SCO) it might be necessary to link the
"socket" library if you call this routine.  Typically this means adding
`-lg2c -lsocket -lm' to the `g77' command line when linking the program.

   For information on other intrinsics with the same name: *Note HostNm
Intrinsic (subroutine)::.


File: g77,  Node: Huge Intrinsic,  Next: IAbs Intrinsic,  Prev: HostNm Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.129 Huge Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Huge' to use this name for an
external procedure.


File: g77,  Node: IAbs Intrinsic,  Next: IAChar Intrinsic,  Prev: Huge Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.130 IAbs Intrinsic
..........................

     IAbs(A)

IAbs: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77,  Node: IAChar Intrinsic,  Next: IAnd Intrinsic,  Prev: IAbs Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.131 IAChar Intrinsic
............................

     IAChar(C)

IAChar: `INTEGER(KIND=1)' function.

C: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `f90'.

Description:

   Returns the code for the ASCII character in the first character
position of C.

   *Note AChar Intrinsic::, for the inverse of this function.

   *Note IChar Intrinsic::, for the function corresponding to the
system's native character set.


File: g77,  Node: IAnd Intrinsic,  Next: IArgC Intrinsic,  Prev: IAChar Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.132 IAnd Intrinsic
..........................

     IAnd(I, J)

IAnd: `INTEGER' function, the exact type being the result of
cross-promoting the types of all the arguments.

I: `INTEGER'; scalar; INTENT(IN).

J: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns value resulting from boolean AND of pair of bits in each of
I and J.


File: g77,  Node: IArgC Intrinsic,  Next: IBClr Intrinsic,  Prev: IAnd Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.133 IArgC Intrinsic
...........................

     IArgC()

IArgC: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the number of command-line arguments.

   This count does not include the specification of the program name
itself.


File: g77,  Node: IBClr Intrinsic,  Next: IBits Intrinsic,  Prev: IArgC Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.134 IBClr Intrinsic
...........................

     IBClr(I, POS)

IBClr: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

POS: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns the value of I with bit POS cleared (set to zero).  *Note
BTest Intrinsic::, for information on bit positions.


File: g77,  Node: IBits Intrinsic,  Next: IBSet Intrinsic,  Prev: IBClr Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.135 IBits Intrinsic
...........................

     IBits(I, POS, LEN)

IBits: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

POS: `INTEGER'; scalar; INTENT(IN).

LEN: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Extracts a subfield of length LEN from I, starting from bit position
POS and extending left for LEN bits.  The result is right-justified and
the remaining bits are zeroed.  The value of `POS+LEN' must be less
than or equal to the value `BIT_SIZE(I)'.  *Note Bit_Size Intrinsic::.


File: g77,  Node: IBSet Intrinsic,  Next: IChar Intrinsic,  Prev: IBits Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.136 IBSet Intrinsic
...........................

     IBSet(I, POS)

IBSet: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

POS: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns the value of I with bit POS set (to one).  *Note BTest
Intrinsic::, for information on bit positions.


File: g77,  Node: IChar Intrinsic,  Next: IDate Intrinsic (UNIX),  Prev: IBSet Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.137 IChar Intrinsic
...........................

     IChar(C)

IChar: `INTEGER(KIND=1)' function.

C: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the code for the character in the first character position
of C.

   Because the system's native character set is used, the
correspondence between character and their codes is not necessarily the
same between GNU Fortran implementations.

   Note that no intrinsic exists to convert a printable character
string to a numerical value.  For example, there is no intrinsic that,
given the `CHARACTER' value `'154'', returns an `INTEGER' or `REAL'
value with the value `154'.

   Instead, you can use internal-file I/O to do this kind of conversion.
For example:

     INTEGER VALUE
     CHARACTER*10 STRING
     STRING = '154'
     READ (STRING, '(I10)'), VALUE
     PRINT *, VALUE
     END

   The above program, when run, prints:

      154

   *Note Char Intrinsic::, for the inverse of the `ICHAR' function.

   *Note IAChar Intrinsic::, for the function corresponding to the
ASCII character set.


File: g77,  Node: IDate Intrinsic (UNIX),  Next: IDiM Intrinsic,  Prev: IChar Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.138 IDate Intrinsic (UNIX)
..................................

     CALL IDate(TARRAY)

TARRAY: `INTEGER(KIND=1)'; DIMENSION(3); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Fills TARRAY with the numerical values at the current local time of
day, month (in the range 1-12), and year in elements 1, 2, and 3,
respectively.  The year has four significant digits.

   Programs making use of this intrinsic might not be Year 10000 (Y10K)
compliant.  For example, the date might appear, to such programs, to
wrap around (change from a larger value to a smaller one) as of the
Year 10000.

   For information on other intrinsics with the same name: *Note IDate
Intrinsic (VXT)::.


File: g77,  Node: IDiM Intrinsic,  Next: IDInt Intrinsic,  Prev: IDate Intrinsic (UNIX),  Up: Table of Intrinsic Functions

10.11.9.139 IDiM Intrinsic
..........................

     IDiM(X, Y)

IDiM: `INTEGER(KIND=1)' function.

X: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Y: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `DIM()' that is specific to one type for X and Y.
*Note DiM Intrinsic::.


File: g77,  Node: IDInt Intrinsic,  Next: IDNInt Intrinsic,  Prev: IDiM Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.140 IDInt Intrinsic
...........................

     IDInt(A)

IDInt: `INTEGER(KIND=1)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `INT()' that is specific to one type for A.  *Note
Int Intrinsic::.


File: g77,  Node: IDNInt Intrinsic,  Next: IEOr Intrinsic,  Prev: IDInt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.141 IDNInt Intrinsic
............................

     IDNInt(A)

IDNInt: `INTEGER(KIND=1)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `NINT()' that is specific to one type for A.  *Note
NInt Intrinsic::.


File: g77,  Node: IEOr Intrinsic,  Next: IErrNo Intrinsic,  Prev: IDNInt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.142 IEOr Intrinsic
..........................

     IEOr(I, J)

IEOr: `INTEGER' function, the exact type being the result of
cross-promoting the types of all the arguments.

I: `INTEGER'; scalar; INTENT(IN).

J: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns value resulting from boolean exclusive-OR of pair of bits in
each of I and J.


File: g77,  Node: IErrNo Intrinsic,  Next: IFix Intrinsic,  Prev: IEOr Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.143 IErrNo Intrinsic
............................

     IErrNo()

IErrNo: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the last system error number (corresponding to the C
`errno').


File: g77,  Node: IFix Intrinsic,  Next: Imag Intrinsic,  Prev: IErrNo Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.144 IFix Intrinsic
..........................

     IFix(A)

IFix: `INTEGER(KIND=1)' function.

A: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `INT()' that is specific to one type for A.  *Note
Int Intrinsic::.


File: g77,  Node: Imag Intrinsic,  Next: ImagPart Intrinsic,  Prev: IFix Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.145 Imag Intrinsic
..........................

     Imag(Z)

Imag: `REAL' function, the `KIND=' value of the type being that of
argument Z.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   The imaginary part of Z is returned, without conversion.

   _Note:_ The way to do this in standard Fortran 90 is `AIMAG(Z)'.
However, when, for example, Z is `DOUBLE COMPLEX', `AIMAG(Z)' means
something different for some compilers that are not true Fortran 90
compilers but offer some extensions standardized by Fortran 90 (such as
the `DOUBLE COMPLEX' type, also known as `COMPLEX(KIND=2)').

   The advantage of `IMAG()' is that, while not necessarily more or
less portable than `AIMAG()', it is more likely to cause a compiler
that doesn't support it to produce a diagnostic than generate incorrect
code.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77,  Node: ImagPart Intrinsic,  Next: Index Intrinsic,  Prev: Imag Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.146 ImagPart Intrinsic
..............................

     ImagPart(Z)

ImagPart: `REAL' function, the `KIND=' value of the type being that of
argument Z.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   The imaginary part of Z is returned, without conversion.

   _Note:_ The way to do this in standard Fortran 90 is `AIMAG(Z)'.
However, when, for example, Z is `DOUBLE COMPLEX', `AIMAG(Z)' means
something different for some compilers that are not true Fortran 90
compilers but offer some extensions standardized by Fortran 90 (such as
the `DOUBLE COMPLEX' type, also known as `COMPLEX(KIND=2)').

   The advantage of `IMAGPART()' is that, while not necessarily more or
less portable than `AIMAG()', it is more likely to cause a compiler
that doesn't support it to produce a diagnostic than generate incorrect
code.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77,  Node: Index Intrinsic,  Next: Int Intrinsic,  Prev: ImagPart Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.147 Index Intrinsic
...........................

     Index(STRING, SUBSTRING)

Index: `INTEGER(KIND=1)' function.

STRING: `CHARACTER'; scalar; INTENT(IN).

SUBSTRING: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the position of the start of the first occurrence of string
SUBSTRING as a substring in STRING, counting from one.  If SUBSTRING
doesn't occur in STRING, zero is returned.


File: g77,  Node: Int Intrinsic,  Next: Int2 Intrinsic,  Prev: Index Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.148 Int Intrinsic
.........................

     Int(A)

Int: `INTEGER(KIND=1)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved, converted to type `INTEGER(KIND=1)'.

   If A is type `COMPLEX', its real part is truncated and converted,
and its imaginary part is disregarded.

   *Note NInt Intrinsic::, for how to convert, rounded to nearest whole
number.

   *Note AInt Intrinsic::, for how to truncate to whole number without
converting.


File: g77,  Node: Int2 Intrinsic,  Next: Int8 Intrinsic,  Prev: Int Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.149 Int2 Intrinsic
..........................

     Int2(A)

Int2: `INTEGER(KIND=6)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved, converted to type `INTEGER(KIND=6)'.

   If A is type `COMPLEX', its real part is truncated and converted,
and its imaginary part is disgregarded.

   *Note Int Intrinsic::.

   The precise meaning of this intrinsic might change in a future
version of the GNU Fortran language, as more is learned about how it is
used.


File: g77,  Node: Int8 Intrinsic,  Next: IOr Intrinsic,  Prev: Int2 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.150 Int8 Intrinsic
..........................

     Int8(A)

Int8: `INTEGER(KIND=2)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved, converted to type `INTEGER(KIND=2)'.

   If A is type `COMPLEX', its real part is truncated and converted,
and its imaginary part is disgregarded.

   *Note Int Intrinsic::.

   The precise meaning of this intrinsic might change in a future
version of the GNU Fortran language, as more is learned about how it is
used.


File: g77,  Node: IOr Intrinsic,  Next: IRand Intrinsic,  Prev: Int8 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.151 IOr Intrinsic
.........................

     IOr(I, J)

IOr: `INTEGER' function, the exact type being the result of
cross-promoting the types of all the arguments.

I: `INTEGER'; scalar; INTENT(IN).

J: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns value resulting from boolean OR of pair of bits in each of I
and J.


File: g77,  Node: IRand Intrinsic,  Next: IsaTty Intrinsic,  Prev: IOr Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.152 IRand Intrinsic
...........................

     IRand(FLAG)

IRand: `INTEGER(KIND=1)' function.

FLAG: `INTEGER'; OPTIONAL; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns a uniform quasi-random number up to a system-dependent limit.
If FLAG is 0, the next number in sequence is returned; if FLAG is 1,
the generator is restarted by calling the UNIX function `srand(0)'; if
FLAG has any other value, it is used as a new seed with `srand()'.

   *Note SRand Intrinsic::.

   _Note:_ As typically implemented (by the routine of the same name in
the C library), this random number generator is a very poor one, though
the BSD and GNU libraries provide a much better implementation than the
`traditional' one.  On a different system you almost certainly want to
use something better.


File: g77,  Node: IsaTty Intrinsic,  Next: IShft Intrinsic,  Prev: IRand Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.153 IsaTty Intrinsic
............................

     IsaTty(UNIT)

IsaTty: `LOGICAL(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns `.TRUE.' if and only if the Fortran I/O unit specified by
UNIT is connected to a terminal device.  See `isatty(3)'.


File: g77,  Node: IShft Intrinsic,  Next: IShftC Intrinsic,  Prev: IsaTty Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.154 IShft Intrinsic
...........................

     IShft(I, SHIFT)

IShft: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

SHIFT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   All bits representing I are shifted SHIFT places.  `SHIFT.GT.0'
indicates a left shift, `SHIFT.EQ.0' indicates no shift and
`SHIFT.LT.0' indicates a right shift.  If the absolute value of the
shift count is greater than `BIT_SIZE(I)', the result is undefined.
Bits shifted out from the left end or the right end are lost.  Zeros
are shifted in from the opposite end.

   *Note IShftC Intrinsic::, for the circular-shift equivalent.


File: g77,  Node: IShftC Intrinsic,  Next: ISign Intrinsic,  Prev: IShft Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.155 IShftC Intrinsic
............................

     IShftC(I, SHIFT, SIZE)

IShftC: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

SHIFT: `INTEGER'; scalar; INTENT(IN).

SIZE: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   The rightmost SIZE bits of the argument I are shifted circularly
SHIFT places, i.e. the bits shifted out of one end are shifted into the
opposite end.  No bits are lost.  The unshifted bits of the result are
the same as the unshifted bits of I.  The  absolute value of the
argument SHIFT must be less than or equal to SIZE.  The value of SIZE
must be greater than or equal to one and less than or equal to
`BIT_SIZE(I)'.

   *Note IShft Intrinsic::, for the logical shift equivalent.


File: g77,  Node: ISign Intrinsic,  Next: ITime Intrinsic,  Prev: IShftC Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.156 ISign Intrinsic
...........................

     ISign(A, B)

ISign: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=1)'; scalar; INTENT(IN).

B: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `SIGN()' that is specific to one type for A and B.
*Note Sign Intrinsic::.


File: g77,  Node: ITime Intrinsic,  Next: Kill Intrinsic (subroutine),  Prev: ISign Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.157 ITime Intrinsic
...........................

     CALL ITime(TARRAY)

TARRAY: `INTEGER(KIND=1)'; DIMENSION(3); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the current local time hour, minutes, and seconds in elements
1, 2, and 3 of TARRAY, respectively.


File: g77,  Node: Kill Intrinsic (subroutine),  Next: Kind Intrinsic,  Prev: ITime Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.158 Kill Intrinsic (subroutine)
.......................................

     CALL Kill(PID, SIGNAL, STATUS)

PID: `INTEGER'; scalar; INTENT(IN).

SIGNAL: `INTEGER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sends the signal specified by SIGNAL to the process PID.  If the
STATUS argument is supplied, it contains 0 on success or a non-zero
error code upon return.  See `kill(2)'.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Kill
Intrinsic (function)::.


File: g77,  Node: Kind Intrinsic,  Next: LBound Intrinsic,  Prev: Kill Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.159 Kind Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Kind' to use this name for an
external procedure.


File: g77,  Node: LBound Intrinsic,  Next: Len Intrinsic,  Prev: Kind Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.160 LBound Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL LBound' to use this name for an
external procedure.


File: g77,  Node: Len Intrinsic,  Next: Len_Trim Intrinsic,  Prev: LBound Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.161 Len Intrinsic
.........................

     Len(STRING)

Len: `INTEGER(KIND=1)' function.

STRING: `CHARACTER'; scalar.

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the length of STRING.

   If STRING is an array, the length of an element of STRING is
returned.

   Note that STRING need not be defined when this intrinsic is invoked,
since only the length, not the content, of STRING is needed.

   *Note Bit_Size Intrinsic::, for the function that determines the
size of its argument in bits.


File: g77,  Node: Len_Trim Intrinsic,  Next: LGe Intrinsic,  Prev: Len Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.162 Len_Trim Intrinsic
..............................

     Len_Trim(STRING)

Len_Trim: `INTEGER(KIND=1)' function.

STRING: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `f90'.

Description:

   Returns the index of the last non-blank character in STRING.
`LNBLNK' and `LEN_TRIM' are equivalent.


File: g77,  Node: LGe Intrinsic,  Next: LGt Intrinsic,  Prev: Len_Trim Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.163 LGe Intrinsic
.........................

     LGe(STRING_A, STRING_B)

LGe: `LOGICAL(KIND=1)' function.

STRING_A: `CHARACTER'; scalar; INTENT(IN).

STRING_B: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `.TRUE.' if `STRING_A.GE.STRING_B', `.FALSE.' otherwise.
STRING_A and STRING_B are interpreted as containing ASCII character
codes.  If either value contains a character not in the ASCII character
set, the result is processor dependent.

   If the STRING_A and STRING_B are not the same length, the shorter is
compared as if spaces were appended to it to form a value that has the
same length as the longer.

   The lexical comparison intrinsics `LGe', `LGt', `LLe', and `LLt'
differ from the corresponding intrinsic operators `.GE.', `.GT.',
`.LE.', `.LT.'.  Because the ASCII collating sequence is assumed, the
following expressions always return `.TRUE.':

     LGE ('0', ' ')
     LGE ('A', '0')
     LGE ('a', 'A')

   The following related expressions do _not_ always return `.TRUE.',
as they are not necessarily evaluated assuming the arguments use ASCII
encoding:

     '0' .GE. ' '
     'A' .GE. '0'
     'a' .GE. 'A'

   The same difference exists between `LGt' and `.GT.'; between `LLe'
and `.LE.'; and between `LLt' and `.LT.'.


File: g77,  Node: LGt Intrinsic,  Next: Link Intrinsic (subroutine),  Prev: LGe Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.164 LGt Intrinsic
.........................

     LGt(STRING_A, STRING_B)

LGt: `LOGICAL(KIND=1)' function.

STRING_A: `CHARACTER'; scalar; INTENT(IN).

STRING_B: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `.TRUE.' if `STRING_A.GT.STRING_B', `.FALSE.' otherwise.
STRING_A and STRING_B are interpreted as containing ASCII character
codes.  If either value contains a character not in the ASCII character
set, the result is processor dependent.

   If the STRING_A and STRING_B are not the same length, the shorter is
compared as if spaces were appended to it to form a value that has the
same length as the longer.

   *Note LGe Intrinsic::, for information on the distinction between
the `LGT' intrinsic and the `.GT.' operator.


File: g77,  Node: Link Intrinsic (subroutine),  Next: LLe Intrinsic,  Prev: LGt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.165 Link Intrinsic (subroutine)
.......................................

     CALL Link(PATH1, PATH2, STATUS)

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Makes a (hard) link from file PATH1 to PATH2.  A null character
(`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise,
trailing blanks in PATH1 and PATH2 are ignored.  If the STATUS argument
is supplied, it contains 0 on success or a non-zero error code upon
return.  See `link(2)'.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Link
Intrinsic (function)::.


File: g77,  Node: LLe Intrinsic,  Next: LLt Intrinsic,  Prev: Link Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.166 LLe Intrinsic
.........................

     LLe(STRING_A, STRING_B)

LLe: `LOGICAL(KIND=1)' function.

STRING_A: `CHARACTER'; scalar; INTENT(IN).

STRING_B: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `.TRUE.' if `STRING_A.LE.STRING_B', `.FALSE.' otherwise.
STRING_A and STRING_B are interpreted as containing ASCII character
codes.  If either value contains a character not in the ASCII character
set, the result is processor dependent.

   If the STRING_A and STRING_B are not the same length, the shorter is
compared as if spaces were appended to it to form a value that has the
same length as the longer.

   *Note LGe Intrinsic::, for information on the distinction between
the `LLE' intrinsic and the `.LE.' operator.


File: g77,  Node: LLt Intrinsic,  Next: LnBlnk Intrinsic,  Prev: LLe Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.167 LLt Intrinsic
.........................

     LLt(STRING_A, STRING_B)

LLt: `LOGICAL(KIND=1)' function.

STRING_A: `CHARACTER'; scalar; INTENT(IN).

STRING_B: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `.TRUE.' if `STRING_A.LT.STRING_B', `.FALSE.' otherwise.
STRING_A and STRING_B are interpreted as containing ASCII character
codes.  If either value contains a character not in the ASCII character
set, the result is processor dependent.

   If the STRING_A and STRING_B are not the same length, the shorter is
compared as if spaces were appended to it to form a value that has the
same length as the longer.

   *Note LGe Intrinsic::, for information on the distinction between
the `LLT' intrinsic and the `.LT.' operator.


File: g77,  Node: LnBlnk Intrinsic,  Next: Loc Intrinsic,  Prev: LLt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.168 LnBlnk Intrinsic
............................

     LnBlnk(STRING)

LnBlnk: `INTEGER(KIND=1)' function.

STRING: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the index of the last non-blank character in STRING.
`LNBLNK' and `LEN_TRIM' are equivalent.


File: g77,  Node: Loc Intrinsic,  Next: Log Intrinsic,  Prev: LnBlnk Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.169 Loc Intrinsic
.........................

     Loc(ENTITY)

Loc: `INTEGER(KIND=7)' function.

ENTITY: Any type; cannot be a constant or expression.

Intrinsic groups: `unix'.

Description:

   The `LOC()' intrinsic works the same way as the `%LOC()' construct.
*Note The `%LOC()' Construct: %LOC(), for more information.


File: g77,  Node: Log Intrinsic,  Next: Log10 Intrinsic,  Prev: Loc Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.170 Log Intrinsic
.........................

     Log(X)

Log: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the natural logarithm of X, which must be greater than zero
or, if type `COMPLEX', must not be zero.

   *Note Exp Intrinsic::, for the inverse of this function.

   *Note Log10 Intrinsic::, for the `common' (base-10) logarithm
function.


File: g77,  Node: Log10 Intrinsic,  Next: Logical Intrinsic,  Prev: Log Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.171 Log10 Intrinsic
...........................

     Log10(X)

Log10: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the common logarithm (base 10) of X, which must be greater
than zero.

   The inverse of this function is `10. ** LOG10(X)'.

   *Note Log Intrinsic::, for the natural logarithm function.


File: g77,  Node: Logical Intrinsic,  Next: Long Intrinsic,  Prev: Log10 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.172 Logical Intrinsic
.............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Logical' to use this name for
an external procedure.


File: g77,  Node: Long Intrinsic,  Next: LShift Intrinsic,  Prev: Logical Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.173 Long Intrinsic
..........................

     Long(A)

Long: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=6)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Archaic form of `INT()' that is specific to one type for A.  *Note
Int Intrinsic::.

   The precise meaning of this intrinsic might change in a future
version of the GNU Fortran language, as more is learned about how it is
used.


File: g77,  Node: LShift Intrinsic,  Next: LStat Intrinsic (subroutine),  Prev: Long Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.174 LShift Intrinsic
............................

     LShift(I, SHIFT)

LShift: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

SHIFT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns I shifted to the left SHIFT bits.

   Although similar to the expression `I*(2**SHIFT)', there are
important differences.  For example, the sign of the result is not
necessarily the same as the sign of I.

   Currently this intrinsic is defined assuming the underlying
representation of I is as a two's-complement integer.  It is unclear at
this point whether that definition will apply when a different
representation is involved.

   *Note LShift Intrinsic::, for the inverse of this function.

   *Note IShft Intrinsic::, for information on a more widely available
left-shifting intrinsic that is also more precisely defined.


File: g77,  Node: LStat Intrinsic (subroutine),  Next: LStat Intrinsic (function),  Prev: LShift Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.175 LStat Intrinsic (subroutine)
........................................

     CALL LStat(FILE, SARRAY, STATUS)

FILE: `CHARACTER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the given file FILE and places them in the array
SARRAY.  A null character (`CHAR(0)') marks the end of the name in
FILE--otherwise, trailing blanks in FILE are ignored.  If FILE is a
symbolic link it returns data on the link itself, so the routine is
available only on systems that support symbolic links.  The values in
this array are extracted from the `stat' structure as returned by
`fstat(2)' q.v., as follows:

  1. Device ID

  2. Inode number

  3. File mode

  4. Number of links

  5. Owner's uid

  6. Owner's gid

  7. ID of device containing directory entry for file (0 if not
     available)

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size (-1 if not available)

 13. Number of blocks allocated (-1 if not available)

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return (`ENOSYS' if the system does not
provide `lstat(2)').

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note LStat
Intrinsic (function)::.


File: g77,  Node: LStat Intrinsic (function),  Next: LTime Intrinsic,  Prev: LStat Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.176 LStat Intrinsic (function)
......................................

     LStat(FILE, SARRAY)

LStat: `INTEGER(KIND=1)' function.

FILE: `CHARACTER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the given file FILE and places them in the array
SARRAY.  A null character (`CHAR(0)') marks the end of the name in
FILE--otherwise, trailing blanks in FILE are ignored.  If FILE is a
symbolic link it returns data on the link itself, so the routine is
available only on systems that support symbolic links.  The values in
this array are extracted from the `stat' structure as returned by
`fstat(2)' q.v., as follows:

  1. Device ID

  2. Inode number

  3. File mode

  4. Number of links

  5. Owner's uid

  6. Owner's gid

  7. ID of device containing directory entry for file (0 if not
     available)

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size (-1 if not available)

 13. Number of blocks allocated (-1 if not available)

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   Returns 0 on success or a non-zero error code (`ENOSYS' if the
system does not provide `lstat(2)').

   For information on other intrinsics with the same name: *Note LStat
Intrinsic (subroutine)::.


File: g77,  Node: LTime Intrinsic,  Next: MatMul Intrinsic,  Prev: LStat Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.177 LTime Intrinsic
...........................

     CALL LTime(STIME, TARRAY)

STIME: `INTEGER(KIND=1)'; scalar; INTENT(IN).

TARRAY: `INTEGER(KIND=1)'; DIMENSION(9); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Given a system time value STIME, fills TARRAY with values extracted
from it appropriate to the GMT time zone using `localtime(3)'.

   The array elements are as follows:

  1. Seconds after the minute, range 0-59 or 0-61 to allow for leap
     seconds

  2. Minutes after the hour, range 0-59

  3. Hours past midnight, range 0-23

  4. Day of month, range 0-31

  5. Number of months since January, range 0-12

  6. Years since 1900

  7. Number of days since Sunday, range 0-6

  8. Days since January 1

  9. Daylight savings indicator: positive if daylight savings is in
     effect, zero if not, and negative if the information isn't
     available.


File: g77,  Node: MatMul Intrinsic,  Next: Max Intrinsic,  Prev: LTime Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.178 MatMul Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MatMul' to use this name for an
external procedure.


File: g77,  Node: Max Intrinsic,  Next: Max0 Intrinsic,  Prev: MatMul Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.179 Max Intrinsic
.........................

     Max(A-1, A-2, ..., A-n)

Max: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

A: `INTEGER' or `REAL'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the argument with the largest value.

   *Note Min Intrinsic::, for the opposite function.


File: g77,  Node: Max0 Intrinsic,  Next: Max1 Intrinsic,  Prev: Max Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.180 Max0 Intrinsic
..........................

     Max0(A-1, A-2, ..., A-n)

Max0: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A.  *Note
Max Intrinsic::.


File: g77,  Node: Max1 Intrinsic,  Next: MaxExponent Intrinsic,  Prev: Max0 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.181 Max1 Intrinsic
..........................

     Max1(A-1, A-2, ..., A-n)

Max1: `INTEGER(KIND=1)' function.

A: `REAL(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MAX()' that is specific to one type for A and a
different return type.  *Note Max Intrinsic::.


File: g77,  Node: MaxExponent Intrinsic,  Next: MaxLoc Intrinsic,  Prev: Max1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.182 MaxExponent Intrinsic
.................................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MaxExponent' to use this name
for an external procedure.


File: g77,  Node: MaxLoc Intrinsic,  Next: MaxVal Intrinsic,  Prev: MaxExponent Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.183 MaxLoc Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MaxLoc' to use this name for an
external procedure.


File: g77,  Node: MaxVal Intrinsic,  Next: MClock Intrinsic,  Prev: MaxLoc Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.184 MaxVal Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MaxVal' to use this name for an
external procedure.


File: g77,  Node: MClock Intrinsic,  Next: MClock8 Intrinsic,  Prev: MaxVal Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.185 MClock Intrinsic
............................

     MClock()

MClock: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the number of clock ticks since the start of the process.
Supported on systems with `clock(3)' (q.v.).

   This intrinsic is not fully portable, such as to systems with 32-bit
`INTEGER' types but supporting times wider than 32 bits.  Therefore,
the values returned by this intrinsic might be, or become, negative, or
numerically less than previous values, during a single run of the
compiled program.

   *Note MClock8 Intrinsic::, for information on a similar intrinsic
that might be portable to more GNU Fortran implementations, though to
fewer Fortran compilers.

   If the system does not support `clock(3)', -1 is returned.


File: g77,  Node: MClock8 Intrinsic,  Next: Merge Intrinsic,  Prev: MClock Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.186 MClock8 Intrinsic
.............................

     MClock8()

MClock8: `INTEGER(KIND=2)' function.

Intrinsic groups: `unix'.

Description:

   Returns the number of clock ticks since the start of the process.
Supported on systems with `clock(3)' (q.v.).

   _Warning:_ this intrinsic does not increase the range of the timing
values over that returned by `clock(3)'.  On a system with a 32-bit
`clock(3)', `MCLOCK8' will return a 32-bit value, even though converted
to an `INTEGER(KIND=2)' value.  That means overflows of the 32-bit
value can still occur.  Therefore, the values returned by this intrinsic
might be, or become, negative, or numerically less than previous values,
during a single run of the compiled program.

   No Fortran implementations other than GNU Fortran are known to
support this intrinsic at the time of this writing.  *Note MClock
Intrinsic::, for information on a similar intrinsic that might be
portable to more Fortran compilers, though to fewer GNU Fortran
implementations.

   If the system does not support `clock(3)', -1 is returned.


File: g77,  Node: Merge Intrinsic,  Next: Min Intrinsic,  Prev: MClock8 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.187 Merge Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Merge' to use this name for an
external procedure.


File: g77,  Node: Min Intrinsic,  Next: Min0 Intrinsic,  Prev: Merge Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.188 Min Intrinsic
.........................

     Min(A-1, A-2, ..., A-n)

Min: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

A: `INTEGER' or `REAL'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the argument with the smallest value.

   *Note Max Intrinsic::, for the opposite function.


File: g77,  Node: Min0 Intrinsic,  Next: Min1 Intrinsic,  Prev: Min Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.189 Min0 Intrinsic
..........................

     Min0(A-1, A-2, ..., A-n)

Min0: `INTEGER(KIND=1)' function.

A: `INTEGER(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A.  *Note
Min Intrinsic::.


File: g77,  Node: Min1 Intrinsic,  Next: MinExponent Intrinsic,  Prev: Min0 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.190 Min1 Intrinsic
..........................

     Min1(A-1, A-2, ..., A-n)

Min1: `INTEGER(KIND=1)' function.

A: `REAL(KIND=1)'; at least two such arguments must be provided;
scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `MIN()' that is specific to one type for A and a
different return type.  *Note Min Intrinsic::.


File: g77,  Node: MinExponent Intrinsic,  Next: MinLoc Intrinsic,  Prev: Min1 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.191 MinExponent Intrinsic
.................................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MinExponent' to use this name
for an external procedure.


File: g77,  Node: MinLoc Intrinsic,  Next: MinVal Intrinsic,  Prev: MinExponent Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.192 MinLoc Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MinLoc' to use this name for an
external procedure.


File: g77,  Node: MinVal Intrinsic,  Next: Mod Intrinsic,  Prev: MinLoc Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.193 MinVal Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL MinVal' to use this name for an
external procedure.


File: g77,  Node: Mod Intrinsic,  Next: Modulo Intrinsic,  Prev: MinVal Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.194 Mod Intrinsic
.........................

     Mod(A, P)

Mod: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

A: `INTEGER' or `REAL'; scalar; INTENT(IN).

P: `INTEGER' or `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns remainder calculated as:

     A - (INT(A / P) * P)

   P must not be zero.


File: g77,  Node: Modulo Intrinsic,  Next: MvBits Intrinsic,  Prev: Mod Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.195 Modulo Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Modulo' to use this name for an
external procedure.


File: g77,  Node: MvBits Intrinsic,  Next: Nearest Intrinsic,  Prev: Modulo Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.196 MvBits Intrinsic
............................

     CALL MvBits(FROM, FROMPOS, LEN, TO, TOPOS)

FROM: `INTEGER'; scalar; INTENT(IN).

FROMPOS: `INTEGER'; scalar; INTENT(IN).

LEN: `INTEGER'; scalar; INTENT(IN).

TO: `INTEGER' with same `KIND=' value as for FROM; scalar;
INTENT(INOUT).

TOPOS: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Moves LEN bits from positions FROMPOS through `FROMPOS+LEN-1' of
FROM to positions TOPOS through `FROMPOS+LEN-1' of TO.  The portion of
argument TO not affected by the movement of bits is unchanged.
Arguments FROM and TO are permitted to be the same numeric storage
unit.  The values of `FROMPOS+LEN' and `TOPOS+LEN' must be less than or
equal to `BIT_SIZE(FROM)'.


File: g77,  Node: Nearest Intrinsic,  Next: NInt Intrinsic,  Prev: MvBits Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.197 Nearest Intrinsic
.............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Nearest' to use this name for
an external procedure.


File: g77,  Node: NInt Intrinsic,  Next: Not Intrinsic,  Prev: Nearest Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.198 NInt Intrinsic
..........................

     NInt(A)

NInt: `INTEGER(KIND=1)' function.

A: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns A with the fractional portion of its magnitude eliminated by
rounding to the nearest whole number and with its sign preserved,
converted to type `INTEGER(KIND=1)'.

   If A is type `COMPLEX', its real part is rounded and converted.

   A fractional portion exactly equal to `.5' is rounded to the whole
number that is larger in magnitude.  (Also called "Fortran round".)

   *Note Int Intrinsic::, for how to convert, truncate to whole number.

   *Note ANInt Intrinsic::, for how to round to nearest whole number
without converting.


File: g77,  Node: Not Intrinsic,  Next: Or Intrinsic,  Prev: NInt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.199 Not Intrinsic
.........................

     Not(I)

Not: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `mil', `f90', `vxt'.

Description:

   Returns value resulting from boolean NOT of each bit in I.


File: g77,  Node: Or Intrinsic,  Next: Pack Intrinsic,  Prev: Not Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.200 Or Intrinsic
........................

     Or(I, J)

Or: `INTEGER' or `LOGICAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

I: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

J: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns value resulting from boolean OR of pair of bits in each of I
and J.


File: g77,  Node: Pack Intrinsic,  Next: PError Intrinsic,  Prev: Or Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.201 Pack Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Pack' to use this name for an
external procedure.


File: g77,  Node: PError Intrinsic,  Next: Precision Intrinsic,  Prev: Pack Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.202 PError Intrinsic
............................

     CALL PError(STRING)

STRING: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Prints (on the C `stderr' stream) a newline-terminated error message
corresponding to the last system error.  This is prefixed by STRING, a
colon and a space.  See `perror(3)'.


File: g77,  Node: Precision Intrinsic,  Next: Present Intrinsic,  Prev: PError Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.203 Precision Intrinsic
...............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Precision' to use this name
for an external procedure.


File: g77,  Node: Present Intrinsic,  Next: Product Intrinsic,  Prev: Precision Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.204 Present Intrinsic
.............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Present' to use this name for
an external procedure.


File: g77,  Node: Product Intrinsic,  Next: Radix Intrinsic,  Prev: Present Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.205 Product Intrinsic
.............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Product' to use this name for
an external procedure.


File: g77,  Node: Radix Intrinsic,  Next: Rand Intrinsic,  Prev: Product Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.206 Radix Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Radix' to use this name for an
external procedure.


File: g77,  Node: Rand Intrinsic,  Next: Random_Number Intrinsic,  Prev: Radix Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.207 Rand Intrinsic
..........................

     Rand(FLAG)

Rand: `REAL(KIND=1)' function.

FLAG: `INTEGER'; OPTIONAL; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns a uniform quasi-random number between 0 and 1.  If FLAG is
0, the next number in sequence is returned; if FLAG is 1, the generator
is restarted by calling `srand(0)'; if FLAG has any other value, it is
used as a new seed with `srand'.

   *Note SRand Intrinsic::.

   _Note:_ As typically implemented (by the routine of the same name in
the C library), this random number generator is a very poor one, though
the BSD and GNU libraries provide a much better implementation than the
`traditional' one.  On a different system you almost certainly want to
use something better.


File: g77,  Node: Random_Number Intrinsic,  Next: Random_Seed Intrinsic,  Prev: Rand Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.208 Random_Number Intrinsic
...................................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Random_Number' to use this
name for an external procedure.


File: g77,  Node: Random_Seed Intrinsic,  Next: Range Intrinsic,  Prev: Random_Number Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.209 Random_Seed Intrinsic
.................................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Random_Seed' to use this name
for an external procedure.


File: g77,  Node: Range Intrinsic,  Next: Real Intrinsic,  Prev: Random_Seed Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.210 Range Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Range' to use this name for an
external procedure.


File: g77,  Node: Real Intrinsic,  Next: RealPart Intrinsic,  Prev: Range Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.211 Real Intrinsic
..........................

     Real(A)

Real: `REAL' function.  The exact type is `REAL(KIND=1)' when argument
A is any type other than `COMPLEX', or when it is `COMPLEX(KIND=1)'.
When A is any `COMPLEX' type other than `COMPLEX(KIND=1)', this
intrinsic is valid only when used as the argument to `REAL()', as
explained below.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Converts A to `REAL(KIND=1)'.

   Use of `REAL()' with a `COMPLEX' argument (other than
`COMPLEX(KIND=1)') is restricted to the following case:

     REAL(REAL(A))

This expression converts the real part of A to `REAL(KIND=1)'.

   *Note RealPart Intrinsic::, for information on a GNU Fortran
intrinsic that extracts the real part of an arbitrary `COMPLEX' value.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77,  Node: RealPart Intrinsic,  Next: Rename Intrinsic (subroutine),  Prev: Real Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.212 RealPart Intrinsic
..............................

     RealPart(Z)

RealPart: `REAL' function, the `KIND=' value of the type being that of
argument Z.

Z: `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `gnu'.

Description:

   The real part of Z is returned, without conversion.

   _Note:_ The way to do this in standard Fortran 90 is `REAL(Z)'.
However, when, for example, Z is `COMPLEX(KIND=2)', `REAL(Z)' means
something different for some compilers that are not true Fortran 90
compilers but offer some extensions standardized by Fortran 90 (such as
the `DOUBLE COMPLEX' type, also known as `COMPLEX(KIND=2)').

   The advantage of `REALPART()' is that, while not necessarily more or
less portable than `REAL()', it is more likely to cause a compiler that
doesn't support it to produce a diagnostic than generate incorrect code.

   *Note REAL() and AIMAG() of Complex::, for more information.


File: g77,  Node: Rename Intrinsic (subroutine),  Next: Repeat Intrinsic,  Prev: RealPart Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.213 Rename Intrinsic (subroutine)
.........................................

     CALL Rename(PATH1, PATH2, STATUS)

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Renames the file PATH1 to PATH2.  A null character (`CHAR(0)') marks
the end of the names in PATH1 and PATH2--otherwise, trailing blanks in
PATH1 and PATH2 are ignored.  See `rename(2)'.  If the STATUS argument
is supplied, it contains 0 on success or a non-zero error code upon
return.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Rename
Intrinsic (function)::.


File: g77,  Node: Repeat Intrinsic,  Next: Reshape Intrinsic,  Prev: Rename Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.214 Repeat Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Repeat' to use this name for an
external procedure.


File: g77,  Node: Reshape Intrinsic,  Next: RRSpacing Intrinsic,  Prev: Repeat Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.215 Reshape Intrinsic
.............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Reshape' to use this name for
an external procedure.


File: g77,  Node: RRSpacing Intrinsic,  Next: RShift Intrinsic,  Prev: Reshape Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.216 RRSpacing Intrinsic
...............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL RRSpacing' to use this name
for an external procedure.


File: g77,  Node: RShift Intrinsic,  Next: Scale Intrinsic,  Prev: RRSpacing Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.217 RShift Intrinsic
............................

     RShift(I, SHIFT)

RShift: `INTEGER' function, the `KIND=' value of the type being that of
argument I.

I: `INTEGER'; scalar; INTENT(IN).

SHIFT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns I shifted to the right SHIFT bits.

   Although similar to the expression `I/(2**SHIFT)', there are
important differences.  For example, the sign of the result is
undefined.

   Currently this intrinsic is defined assuming the underlying
representation of I is as a two's-complement integer.  It is unclear at
this point whether that definition will apply when a different
representation is involved.

   *Note RShift Intrinsic::, for the inverse of this function.

   *Note IShft Intrinsic::, for information on a more widely available
right-shifting intrinsic that is also more precisely defined.


File: g77,  Node: Scale Intrinsic,  Next: Scan Intrinsic,  Prev: RShift Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.218 Scale Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Scale' to use this name for an
external procedure.


File: g77,  Node: Scan Intrinsic,  Next: Second Intrinsic (function),  Prev: Scale Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.219 Scan Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Scan' to use this name for an
external procedure.


File: g77,  Node: Second Intrinsic (function),  Next: Second Intrinsic (subroutine),  Prev: Scan Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.220 Second Intrinsic (function)
.......................................

     Second()

Second: `REAL(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the process's runtime in seconds--the same value as the UNIX
function `etime' returns.

   On some systems, the underlying timings are represented using types
with sufficiently small limits that overflows (wraparounds) are
possible, such as 32-bit types.  Therefore, the values returned by this
intrinsic might be, or become, negative, or numerically less than
previous values, during a single run of the compiled program.

   For information on other intrinsics with the same name: *Note Second
Intrinsic (subroutine)::.


File: g77,  Node: Second Intrinsic (subroutine),  Next: Selected_Int_Kind Intrinsic,  Prev: Second Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.221 Second Intrinsic (subroutine)
.........................................

     CALL Second(SECONDS)

SECONDS: `REAL'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Returns the process's runtime in seconds in SECONDS--the same value
as the UNIX function `etime' returns.

   On some systems, the underlying timings are represented using types
with sufficiently small limits that overflows (wraparounds) are
possible, such as 32-bit types.  Therefore, the values returned by this
intrinsic might be, or become, negative, or numerically less than
previous values, during a single run of the compiled program.

   This routine is known from Cray Fortran.  *Note CPU_Time Intrinsic::,
for a standard equivalent.

   For information on other intrinsics with the same name: *Note Second
Intrinsic (function)::.


File: g77,  Node: Selected_Int_Kind Intrinsic,  Next: Selected_Real_Kind Intrinsic,  Prev: Second Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.222 Selected_Int_Kind Intrinsic
.......................................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Selected_Int_Kind' to use this
name for an external procedure.


File: g77,  Node: Selected_Real_Kind Intrinsic,  Next: Set_Exponent Intrinsic,  Prev: Selected_Int_Kind Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.223 Selected_Real_Kind Intrinsic
........................................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Selected_Real_Kind' to use
this name for an external procedure.


File: g77,  Node: Set_Exponent Intrinsic,  Next: Shape Intrinsic,  Prev: Selected_Real_Kind Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.224 Set_Exponent Intrinsic
..................................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Set_Exponent' to use this name
for an external procedure.


File: g77,  Node: Shape Intrinsic,  Next: Short Intrinsic,  Prev: Set_Exponent Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.225 Shape Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Shape' to use this name for an
external procedure.


File: g77,  Node: Short Intrinsic,  Next: Sign Intrinsic,  Prev: Shape Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.226 Short Intrinsic
...........................

     Short(A)

Short: `INTEGER(KIND=6)' function.

A: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns A with the fractional portion of its magnitude truncated and
its sign preserved, converted to type `INTEGER(KIND=6)'.

   If A is type `COMPLEX', its real part is truncated and converted,
and its imaginary part is disgregarded.

   *Note Int Intrinsic::.

   The precise meaning of this intrinsic might change in a future
version of the GNU Fortran language, as more is learned about how it is
used.


File: g77,  Node: Sign Intrinsic,  Next: Signal Intrinsic (subroutine),  Prev: Short Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.227 Sign Intrinsic
..........................

     Sign(A, B)

Sign: `INTEGER' or `REAL' function, the exact type being the result of
cross-promoting the types of all the arguments.

A: `INTEGER' or `REAL'; scalar; INTENT(IN).

B: `INTEGER' or `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns `ABS(A)*S', where S is +1 if `B.GE.0', -1 otherwise.

   *Note Abs Intrinsic::, for the function that returns the magnitude
of a value.


File: g77,  Node: Signal Intrinsic (subroutine),  Next: Sin Intrinsic,  Prev: Sign Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.228 Signal Intrinsic (subroutine)
.........................................

     CALL Signal(NUMBER, HANDLER, STATUS)

NUMBER: `INTEGER'; scalar; INTENT(IN).

HANDLER: Signal handler (`INTEGER FUNCTION' or `SUBROUTINE') or
dummy/global `INTEGER(KIND=1)' scalar.

STATUS: `INTEGER(KIND=7)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   If HANDLER is a an `EXTERNAL' routine, arranges for it to be invoked
with a single integer argument (of system-dependent length) when signal
NUMBER occurs.  If HANDLER is an integer, it can be used to turn off
handling of signal NUMBER or revert to its default action.  See
`signal(2)'.

   Note that HANDLER will be called using C conventions, so the value
of its argument in Fortran terms Fortran terms is obtained by applying
`%LOC()' (or LOC()) to it.

   The value returned by `signal(2)' is written to STATUS, if that
argument is supplied.  Otherwise the return value is ignored.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   _Warning:_ Use of the `libf2c' run-time library function `signal_'
directly (such as via `EXTERNAL SIGNAL') requires use of the `%VAL()'
construct to pass an `INTEGER' value (such as `SIG_IGN' or `SIG_DFL')
for the HANDLER argument.

   However, while `CALL SIGNAL(SIGNUM, %VAL(SIG_IGN))' works when
`SIGNAL' is treated as an external procedure (and resolves, at link
time, to `libf2c''s `signal_' routine), this construct is not valid
when `SIGNAL' is recognized as the intrinsic of that name.

   Therefore, for maximum portability and reliability, code such
references to the `SIGNAL' facility as follows:

     INTRINSIC SIGNAL
     ...
     CALL SIGNAL(SIGNUM, SIG_IGN)

   `g77' will compile such a call correctly, while other compilers will
generally either do so as well or reject the `INTRINSIC SIGNAL'
statement via a diagnostic, allowing you to take appropriate action.

   For information on other intrinsics with the same name: *Note Signal
Intrinsic (function)::.


File: g77,  Node: Sin Intrinsic,  Next: SinH Intrinsic,  Prev: Signal Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.229 Sin Intrinsic
.........................

     Sin(X)

Sin: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the sine of X, an angle measured in radians.

   *Note ASin Intrinsic::, for the inverse of this function.


File: g77,  Node: SinH Intrinsic,  Next: Sleep Intrinsic,  Prev: Sin Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.230 SinH Intrinsic
..........................

     SinH(X)

SinH: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the hyperbolic sine of X.


File: g77,  Node: Sleep Intrinsic,  Next: Sngl Intrinsic,  Prev: SinH Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.231 Sleep Intrinsic
...........................

     CALL Sleep(SECONDS)

SECONDS: `INTEGER(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Causes the process to pause for SECONDS seconds.  See `sleep(2)'.


File: g77,  Node: Sngl Intrinsic,  Next: Spacing Intrinsic,  Prev: Sleep Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.232 Sngl Intrinsic
..........................

     Sngl(A)

Sngl: `REAL(KIND=1)' function.

A: `REAL(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Archaic form of `REAL()' that is specific to one type for A.  *Note
Real Intrinsic::.


File: g77,  Node: Spacing Intrinsic,  Next: Spread Intrinsic,  Prev: Sngl Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.233 Spacing Intrinsic
.............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Spacing' to use this name for
an external procedure.


File: g77,  Node: Spread Intrinsic,  Next: SqRt Intrinsic,  Prev: Spacing Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.234 Spread Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Spread' to use this name for an
external procedure.


File: g77,  Node: SqRt Intrinsic,  Next: SRand Intrinsic,  Prev: Spread Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.235 SqRt Intrinsic
..........................

     SqRt(X)

SqRt: `REAL' or `COMPLEX' function, the exact type being that of
argument X.

X: `REAL' or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the square root of X, which must not be negative.

   To calculate and represent the square root of a negative number,
complex arithmetic must be used.  For example, `SQRT(COMPLEX(X))'.

   The inverse of this function is `SQRT(X) * SQRT(X)'.


File: g77,  Node: SRand Intrinsic,  Next: Stat Intrinsic (subroutine),  Prev: SqRt Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.236 SRand Intrinsic
...........................

     CALL SRand(SEED)

SEED: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Reinitialises the generator with the seed in SEED.  *Note IRand
Intrinsic::.  *Note Rand Intrinsic::.


File: g77,  Node: Stat Intrinsic (subroutine),  Next: Stat Intrinsic (function),  Prev: SRand Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.237 Stat Intrinsic (subroutine)
.......................................

     CALL Stat(FILE, SARRAY, STATUS)

FILE: `CHARACTER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the given file FILE and places them in the array
SARRAY.  A null character (`CHAR(0)') marks the end of the name in
FILE--otherwise, trailing blanks in FILE are ignored.  The values in
this array are extracted from the `stat' structure as returned by
`fstat(2)' q.v., as follows:

  1. Device ID

  2. Inode number

  3. File mode

  4. Number of links

  5. Owner's uid

  6. Owner's gid

  7. ID of device containing directory entry for file (0 if not
     available)

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size (-1 if not available)

 13. Number of blocks allocated (-1 if not available)

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   If the STATUS argument is supplied, it contains 0 on success or a
non-zero error code upon return.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Stat
Intrinsic (function)::.


File: g77,  Node: Stat Intrinsic (function),  Next: Sum Intrinsic,  Prev: Stat Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.238 Stat Intrinsic (function)
.....................................

     Stat(FILE, SARRAY)

Stat: `INTEGER(KIND=1)' function.

FILE: `CHARACTER'; scalar; INTENT(IN).

SARRAY: `INTEGER(KIND=1)'; DIMENSION(13); INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Obtains data about the given file FILE and places them in the array
SARRAY.  A null character (`CHAR(0)') marks the end of the name in
FILE--otherwise, trailing blanks in FILE are ignored.  The values in
this array are extracted from the `stat' structure as returned by
`fstat(2)' q.v., as follows:

  1. Device ID

  2. Inode number

  3. File mode

  4. Number of links

  5. Owner's uid

  6. Owner's gid

  7. ID of device containing directory entry for file (0 if not
     available)

  8. File size (bytes)

  9. Last access time

 10. Last modification time

 11. Last file status change time

 12. Preferred I/O block size (-1 if not available)

 13. Number of blocks allocated (-1 if not available)

   Not all these elements are relevant on all systems.  If an element
is not relevant, it is returned as 0.

   Returns 0 on success or a non-zero error code.

   For information on other intrinsics with the same name: *Note Stat
Intrinsic (subroutine)::.


File: g77,  Node: Sum Intrinsic,  Next: SymLnk Intrinsic (subroutine),  Prev: Stat Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.239 Sum Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Sum' to use this name for an
external procedure.


File: g77,  Node: SymLnk Intrinsic (subroutine),  Next: System Intrinsic (subroutine),  Prev: Sum Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.240 SymLnk Intrinsic (subroutine)
.........................................

     CALL SymLnk(PATH1, PATH2, STATUS)

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Makes a symbolic link from file PATH1 to PATH2.  A null character
(`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise,
trailing blanks in PATH1 and PATH2 are ignored.  If the STATUS argument
is supplied, it contains 0 on success or a non-zero error code upon
return (`ENOSYS' if the system does not provide `symlink(2)').

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note SymLnk
Intrinsic (function)::.


File: g77,  Node: System Intrinsic (subroutine),  Next: System_Clock Intrinsic,  Prev: SymLnk Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.241 System Intrinsic (subroutine)
.........................................

     CALL System(COMMAND, STATUS)

COMMAND: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Passes the command COMMAND to a shell (see `system(3)').  If
argument STATUS is present, it contains the value returned by
`system(3)', presumably 0 if the shell command succeeded.  Note that
which shell is used to invoke the command is system-dependent and
environment-dependent.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note System
Intrinsic (function)::.


File: g77,  Node: System_Clock Intrinsic,  Next: Tan Intrinsic,  Prev: System Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.242 System_Clock Intrinsic
..................................

     CALL System_Clock(COUNT, RATE, MAX)

COUNT: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

RATE: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

MAX: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `f90'.

Description:

   Returns in COUNT the current value of the system clock; this is the
value returned by the UNIX function `times(2)' in this implementation,
but isn't in general.  RATE is the number of clock ticks per second and
MAX is the maximum value this can take, which isn't very useful in this
implementation since it's just the maximum C `unsigned int' value.

   On some systems, the underlying timings are represented using types
with sufficiently small limits that overflows (wraparounds) are
possible, such as 32-bit types.  Therefore, the values returned by this
intrinsic might be, or become, negative, or numerically less than
previous values, during a single run of the compiled program.


File: g77,  Node: Tan Intrinsic,  Next: TanH Intrinsic,  Prev: System_Clock Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.243 Tan Intrinsic
.........................

     Tan(X)

Tan: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the tangent of X, an angle measured in radians.

   *Note ATan Intrinsic::, for the inverse of this function.


File: g77,  Node: TanH Intrinsic,  Next: Time Intrinsic (UNIX),  Prev: Tan Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.244 TanH Intrinsic
..........................

     TanH(X)

TanH: `REAL' function, the `KIND=' value of the type being that of
argument X.

X: `REAL'; scalar; INTENT(IN).

Intrinsic groups: (standard FORTRAN 77).

Description:

   Returns the hyperbolic tangent of X.


File: g77,  Node: Time Intrinsic (UNIX),  Next: Time8 Intrinsic,  Prev: TanH Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.245 Time Intrinsic (UNIX)
.................................

     Time()

Time: `INTEGER(KIND=1)' function.

Intrinsic groups: `unix'.

Description:

   Returns the current time encoded as an integer (in the manner of the
UNIX function `time(3)').  This value is suitable for passing to
`CTIME', `GMTIME', and `LTIME'.

   This intrinsic is not fully portable, such as to systems with 32-bit
`INTEGER' types but supporting times wider than 32 bits.  Therefore,
the values returned by this intrinsic might be, or become, negative, or
numerically less than previous values, during a single run of the
compiled program.

   *Note Time8 Intrinsic::, for information on a similar intrinsic that
might be portable to more GNU Fortran implementations, though to fewer
Fortran compilers.

   For information on other intrinsics with the same name: *Note Time
Intrinsic (VXT)::.


File: g77,  Node: Time8 Intrinsic,  Next: Tiny Intrinsic,  Prev: Time Intrinsic (UNIX),  Up: Table of Intrinsic Functions

10.11.9.246 Time8 Intrinsic
...........................

     Time8()

Time8: `INTEGER(KIND=2)' function.

Intrinsic groups: `unix'.

Description:

   Returns the current time encoded as a long integer (in the manner of
the UNIX function `time(3)').  This value is suitable for passing to
`CTIME', `GMTIME', and `LTIME'.

   _Warning:_ this intrinsic does not increase the range of the timing
values over that returned by `time(3)'.  On a system with a 32-bit
`time(3)', `TIME8' will return a 32-bit value, even though converted to
an `INTEGER(KIND=2)' value.  That means overflows of the 32-bit value
can still occur.  Therefore, the values returned by this intrinsic
might be, or become, negative, or numerically less than previous values,
during a single run of the compiled program.

   No Fortran implementations other than GNU Fortran are known to
support this intrinsic at the time of this writing.  *Note Time
Intrinsic (UNIX)::, for information on a similar intrinsic that might
be portable to more Fortran compilers, though to fewer GNU Fortran
implementations.


File: g77,  Node: Tiny Intrinsic,  Next: Transfer Intrinsic,  Prev: Time8 Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.247 Tiny Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Tiny' to use this name for an
external procedure.


File: g77,  Node: Transfer Intrinsic,  Next: Transpose Intrinsic,  Prev: Tiny Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.248 Transfer Intrinsic
..............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Transfer' to use this name for
an external procedure.


File: g77,  Node: Transpose Intrinsic,  Next: Trim Intrinsic,  Prev: Transfer Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.249 Transpose Intrinsic
...............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Transpose' to use this name
for an external procedure.


File: g77,  Node: Trim Intrinsic,  Next: TtyNam Intrinsic (subroutine),  Prev: Transpose Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.250 Trim Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Trim' to use this name for an
external procedure.


File: g77,  Node: TtyNam Intrinsic (subroutine),  Next: TtyNam Intrinsic (function),  Prev: Trim Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.251 TtyNam Intrinsic (subroutine)
.........................................

     CALL TtyNam(UNIT, NAME)

UNIT: `INTEGER'; scalar; INTENT(IN).

NAME: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets NAME to the name of the terminal device open on logical unit
UNIT or to a blank string if UNIT is not connected to a terminal.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note TtyNam
Intrinsic (function)::.


File: g77,  Node: TtyNam Intrinsic (function),  Next: UBound Intrinsic,  Prev: TtyNam Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.252 TtyNam Intrinsic (function)
.......................................

     TtyNam(UNIT)

TtyNam: `CHARACTER*(*)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `unix'.

Description:

   Returns the name of the terminal device open on logical unit UNIT or
a blank string if UNIT is not connected to a terminal.

   For information on other intrinsics with the same name: *Note TtyNam
Intrinsic (subroutine)::.


File: g77,  Node: UBound Intrinsic,  Next: UMask Intrinsic (subroutine),  Prev: TtyNam Intrinsic (function),  Up: Table of Intrinsic Functions

10.11.9.253 UBound Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL UBound' to use this name for an
external procedure.


File: g77,  Node: UMask Intrinsic (subroutine),  Next: Unlink Intrinsic (subroutine),  Prev: UBound Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.254 UMask Intrinsic (subroutine)
........................................

     CALL UMask(MASK, OLD)

MASK: `INTEGER'; scalar; INTENT(IN).

OLD: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Sets the file creation mask to MASK and returns the old value in
argument OLD if it is supplied.  See `umask(2)'.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine.

   For information on other intrinsics with the same name: *Note UMask
Intrinsic (function)::.


File: g77,  Node: Unlink Intrinsic (subroutine),  Next: Unpack Intrinsic,  Prev: UMask Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.255 Unlink Intrinsic (subroutine)
.........................................

     CALL Unlink(FILE, STATUS)

FILE: `CHARACTER'; scalar; INTENT(IN).

STATUS: `INTEGER(KIND=1)'; OPTIONAL; scalar; INTENT(OUT).

Intrinsic groups: `unix'.

Description:

   Unlink the file FILE.  A null character (`CHAR(0)') marks the end of
the name in FILE--otherwise, trailing blanks in FILE are ignored.  If
the STATUS argument is supplied, it contains 0 on success or a non-zero
error code upon return.  See `unlink(2)'.

   Some non-GNU implementations of Fortran provide this intrinsic as
only a function, not as a subroutine, or do not support the (optional)
STATUS argument.

   For information on other intrinsics with the same name: *Note Unlink
Intrinsic (function)::.


File: g77,  Node: Unpack Intrinsic,  Next: Verify Intrinsic,  Prev: Unlink Intrinsic (subroutine),  Up: Table of Intrinsic Functions

10.11.9.256 Unpack Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Unpack' to use this name for an
external procedure.


File: g77,  Node: Verify Intrinsic,  Next: XOr Intrinsic,  Prev: Unpack Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.257 Verify Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL Verify' to use this name for an
external procedure.


File: g77,  Node: XOr Intrinsic,  Next: ZAbs Intrinsic,  Prev: Verify Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.258 XOr Intrinsic
.........................

     XOr(I, J)

XOr: `INTEGER' or `LOGICAL' function, the exact type being the result
of cross-promoting the types of all the arguments.

I: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

J: `INTEGER' or `LOGICAL'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Returns value resulting from boolean exclusive-OR of pair of bits in
each of I and J.


File: g77,  Node: ZAbs Intrinsic,  Next: ZCos Intrinsic,  Prev: XOr Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.259 ZAbs Intrinsic
..........................

     ZAbs(A)

ZAbs: `REAL(KIND=2)' function.

A: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77,  Node: ZCos Intrinsic,  Next: ZExp Intrinsic,  Prev: ZAbs Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.260 ZCos Intrinsic
..........................

     ZCos(X)

ZCos: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `COS()' that is specific to one type for X.  *Note
Cos Intrinsic::.


File: g77,  Node: ZExp Intrinsic,  Next: ZLog Intrinsic,  Prev: ZCos Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.261 ZExp Intrinsic
..........................

     ZExp(X)

ZExp: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `EXP()' that is specific to one type for X.  *Note
Exp Intrinsic::.


File: g77,  Node: ZLog Intrinsic,  Next: ZSin Intrinsic,  Prev: ZExp Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.262 ZLog Intrinsic
..........................

     ZLog(X)

ZLog: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77,  Node: ZSin Intrinsic,  Next: ZSqRt Intrinsic,  Prev: ZLog Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.263 ZSin Intrinsic
..........................

     ZSin(X)

ZSin: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `SIN()' that is specific to one type for X.  *Note
Sin Intrinsic::.


File: g77,  Node: ZSqRt Intrinsic,  Prev: ZSin Intrinsic,  Up: Table of Intrinsic Functions

10.11.9.264 ZSqRt Intrinsic
...........................

     ZSqRt(X)

ZSqRt: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c'.

Description:

   Archaic form of `SQRT()' that is specific to one type for X.  *Note
SqRt Intrinsic::.


File: g77,  Node: Scope and Classes of Names,  Next: I/O,  Prev: Functions and Subroutines,  Up: Language

10.12 Scope and Classes of Symbolic Names
=========================================

   (The following information augments or overrides the information in
Chapter 18 of ANSI X3.9-1978 FORTRAN 77 in specifying the GNU Fortran
language.  Chapter 18 of that document otherwise serves as the basis
for the relevant aspects of GNU Fortran.)

* Menu:

* Underscores in Symbol Names::


File: g77,  Node: Underscores in Symbol Names,  Up: Scope and Classes of Names

10.12.1 Underscores in Symbol Names
-----------------------------------

   Underscores (`_') are accepted in symbol names after the first
character (which must be a letter).


File: g77,  Node: I/O,  Next: Fortran 90 Features,  Prev: Scope and Classes of Names,  Up: Language

10.13 I/O
=========

   A dollar sign at the end of an output format specification suppresses
the newline at the end of the output.

   Edit descriptors in `FORMAT' statements may contain compile-time
`INTEGER' constant expressions in angle brackets, such as
     10    FORMAT (I<WIDTH>)

   The `OPEN' specifier `NAME=' is equivalent to `FILE='.

   These Fortran 90 features are supported:
   * The `O' and `Z' edit descriptors are supported for I/O of integers
     in octal and hexadecimal formats, respectively.

   * The `FILE=' specifier may be omitted in an `OPEN' statement if
     `STATUS='SCRATCH'' is supplied.  The `STATUS='REPLACE'' specifier
     is supported.


File: g77,  Node: Fortran 90 Features,  Prev: I/O,  Up: Language

10.14 Fortran 90 Features
=========================

   For convenience this section collects a list (probably incomplete) of
the Fortran 90 features supported by the GNU Fortran language, even if
they are documented elsewhere.  *Note Characters, Lines, and Execution
Sequence: Characters Lines Sequence, for information on additional
fixed source form lexical issues.  Further, the free source form is
supported through the `-ffree-form' option.  Other Fortran 90 features
can be turned on by the `-ff90' option; see *Note Fortran 90::.  For
information on the Fortran 90 intrinsics available, see *Note Table of
Intrinsic Functions::.

Automatic arrays in procedures

Character assignments
     In character assignments, the variable being assigned may occur on
     the right hand side of the assignment.

Character strings
     Strings may have zero length and substrings of character constants
     are permitted.  Character constants may be enclosed in double
     quotes (`"') as well as single quotes.  *Note Character Type::.

Construct names
     (Symbolic tags on blocks.)  *Note Construct Names::.

`CYCLE' and `EXIT'
     *Note The `CYCLE' and `EXIT' Statements: CYCLE and EXIT.

`DOUBLE COMPLEX'
     *Note `DOUBLE COMPLEX' Statement: DOUBLE COMPLEX.

`DO WHILE'
     *Note DO WHILE::.

`END' decoration
     *Note Statements::.

`END DO'
     *Note END DO::.

`KIND'

`IMPLICIT NONE'

`INCLUDE' statements
     *Note INCLUDE::.

List-directed and namelist I/O on internal files

Binary, octal and hexadecimal constants
     These are supported more generally than required by Fortran 90.
     *Note Integer Type::.

`O' and `Z' edit descriptors

`NAMELIST'
     *Note NAMELIST::.

`OPEN' specifiers
     `STATUS='REPLACE'' is supported.  The `FILE=' specifier may be
     omitted in an `OPEN' statement if `STATUS='SCRATCH'' is supplied.

`FORMAT' edit descriptors
     The `Z' edit descriptor is supported.

Relational operators
     The operators `<', `<=', `==', `/=', `>' and `>=' may be used
     instead of `.LT.', `.LE.', `.EQ.', `.NE.', `.GT.' and `.GE.'
     respectively.

`SELECT CASE'
     Not fully implemented.  *Note `SELECT CASE' on `CHARACTER' Type:
     SELECT CASE on CHARACTER Type.

Specification statements
     A limited subset of the Fortran 90 syntax and semantics for
     variable declarations is supported, including `KIND'.  *Note Kind
     Notation::.  (`KIND' is of limited usefulness in the absence of the
     `KIND'-related intrinsics, since these intrinsics permit writing
     more widely portable code.)  An example of supported `KIND' usage
     is:
          INTEGER (KIND=1) :: FOO=1, BAR=2
          CHARACTER (LEN=3) FOO
     `PARAMETER' and `DIMENSION' attributes aren't supported.


File: g77,  Node: Other Dialects,  Next: Other Compilers,  Prev: Compiler,  Up: Top

11 Other Dialects
*****************

   GNU Fortran supports a variety of features that are not considered
part of the GNU Fortran language itself, but are representative of
various dialects of Fortran that `g77' supports in whole or in part.

   Any of the features listed below might be disallowed by `g77' unless
some command-line option is specified.  Currently, some of the features
are accepted using the default invocation of `g77', but that might
change in the future.

   _Note: This portion of the documentation definitely needs a lot of
work!_

* Menu:

* Source Form::       Details of fixed-form and free-form source.
* Trailing Comment::  Use of `/*' to start a comment.
* Debug Line::        Use of `D' in column 1.
* Dollar Signs::      Use of `$' in symbolic names.
* Case Sensitivity::  Uppercase and lowercase in source files.
* VXT Fortran::       ...versus the GNU Fortran language.
* Fortran 90::        ...versus the GNU Fortran language.
* Pedantic Compilation::  Enforcing the standard.
* Distensions::       Misfeatures supported by GNU Fortran.


File: g77,  Node: Source Form,  Next: Trailing Comment,  Up: Other Dialects

11.1 Source Form
================

   GNU Fortran accepts programs written in either fixed form or free
form.

   Fixed form corresponds to ANSI FORTRAN 77 (plus popular extensions,
such as allowing tabs) and Fortran 90's fixed form.

   Free form corresponds to Fortran 90's free form (though possibly not
entirely up-to-date, and without complaining about some things that for
which Fortran 90 requires diagnostics, such as the spaces in the
constant in `R = 3 . 1').

   The way a Fortran compiler views source files depends entirely on the
implementation choices made for the compiler, since those choices are
explicitly left to the implementation by the published Fortran
standards.  GNU Fortran currently tries to be somewhat like a few
popular compilers (`f2c', Digital ("DEC") Fortran, and so on), though a
cleaner default definition along with more flexibility offered by
command-line options is likely to be offered in version 0.6.

   This section describes how `g77' interprets source lines.

* Menu:

* Carriage Returns::  Carriage returns ignored.
* Tabs::              Tabs converted to spaces.
* Short Lines::       Short lines padded with spaces (fixed-form only).
* Long Lines::        Long lines truncated.
* Ampersands::        Special Continuation Lines.


File: g77,  Node: Carriage Returns,  Next: Tabs,  Up: Source Form

11.1.1 Carriage Returns
-----------------------

   Carriage returns (`\r') in source lines are ignored.  This is
somewhat different from `f2c', which seems to treat them as spaces
outside character/Hollerith constants, and encodes them as `\r' inside
such constants.


File: g77,  Node: Tabs,  Next: Short Lines,  Prev: Carriage Returns,  Up: Source Form

11.1.2 Tabs
-----------

   A source line with a <TAB> character anywhere in it is treated as
entirely significant--however long it is--instead of ending in column
72 (for fixed-form source) or 132 (for free-form source).  This also is
different from `f2c', which encodes tabs as `\t' (the ASCII <TAB>
character) inside character and Hollerith constants, but nevertheless
seems to treat the column position as if it had been affected by the
canonical tab positioning.

   `g77' effectively translates tabs to the appropriate number of
spaces (a la the default for the UNIX `expand' command) before doing
any other processing, other than (currently) noting whether a tab was
found on a line and using this information to decide how to interpret
the length of the line and continued constants.

   Note that this default behavior probably will change for version 0.6,
when it will presumably be available via a command-line option.  The
default as of version 0.6 is planned to be a "pure visual" model, where
tabs are immediately converted to spaces and otherwise have no effect,
so the way a typical user sees source lines produces a consistent
result no matter how the spacing in those source lines is actually
implemented via tabs, spaces, and trailing tabs/spaces before newline.
Command-line options are likely to be added to specify whether all or
just-tabbed lines are to be extended to 132 or full input-line length,
and perhaps even an option will be added to specify the truncated-line
behavior to which some Digital compilers default (and which affects the
way continued character/Hollerith constants are interpreted).


File: g77,  Node: Short Lines,  Next: Long Lines,  Prev: Tabs,  Up: Source Form

11.1.3 Short Lines
------------------

   Source lines shorter than the applicable fixed-form length are
treated as if they were padded with spaces to that length.  (None of
this is relevant to source files written in free form.)

   This affects only continued character and Hollerith constants, and
is a different interpretation than provided by some other popular
compilers (although a bit more consistent with the traditional
punched-card basis of Fortran and the way the Fortran standard
expressed fixed source form).

   `g77' might someday offer an option to warn about cases where
differences might be seen as a result of this treatment, and perhaps an
option to specify the alternate behavior as well.

   Note that this padding cannot apply to lines that are effectively of
infinite length--such lines are specified using command-line options
like `-ffixed-line-length-none', for example.


File: g77,  Node: Long Lines,  Next: Ampersands,  Prev: Short Lines,  Up: Source Form

11.1.4 Long Lines
-----------------

   Source lines longer than the applicable length are truncated to that
length.  Currently, `g77' does not warn if the truncated characters are
not spaces, to accommodate existing code written for systems that
treated truncated text as commentary (especially in columns 73 through
80).

   *Note Options Controlling Fortran Dialect: Fortran Dialect Options,
for information on the `-ffixed-line-length-N' option, which can be
used to set the line length applicable to fixed-form source files.


File: g77,  Node: Ampersands,  Prev: Long Lines,  Up: Source Form

11.1.5 Ampersand Continuation Line
----------------------------------

   A `&' in column 1 of fixed-form source denotes an arbitrary-length
continuation line, imitating the behavior of `f2c'.


File: g77,  Node: Trailing Comment,  Next: Debug Line,  Prev: Source Form,  Up: Other Dialects

11.2 Trailing Comment
=====================

   `g77' supports use of `/*' to start a trailing comment.  In the GNU
Fortran language, `!' is used for this purpose.

   `/*' is not in the GNU Fortran language because the use of `/*' in a
program might suggest to some readers that a block, not trailing,
comment is started (and thus ended by `*/', not end of line), since
that is the meaning of `/*' in C.

   Also, such readers might think they can use `//' to start a trailing
comment as an alternative to `/*', but `//' already denotes
concatenation, and such a "comment" might actually result in a program
that compiles without error (though it would likely behave incorrectly).


File: g77,  Node: Debug Line,  Next: Dollar Signs,  Prev: Trailing Comment,  Up: Other Dialects

11.3 Debug Line
===============

   Use of `D' or `d' as the first character (column 1) of a source line
denotes a debug line.

   In turn, a debug line is treated as either a comment line or a
normal line, depending on whether debug lines are enabled.

   When treated as a comment line, a line beginning with `D' or `d' is
treated as if it the first character was `C' or `c', respectively.
When treated as a normal line, such a line is treated as if the first
character was <SPC> (space).

   (Currently, `g77' provides no means for treating debug lines as
normal lines.)


File: g77,  Node: Dollar Signs,  Next: Case Sensitivity,  Prev: Debug Line,  Up: Other Dialects

11.4 Dollar Signs in Symbol Names
=================================

   Dollar signs (`$') are allowed in symbol names (after the first
character) when the `-fdollar-ok' option is specified.


File: g77,  Node: Case Sensitivity,  Next: VXT Fortran,  Prev: Dollar Signs,  Up: Other Dialects

11.5 Case Sensitivity
=====================

   GNU Fortran offers the programmer way too much flexibility in
deciding how source files are to be treated vis-a-vis uppercase and
lowercase characters.  There are 66 useful settings that affect case
sensitivity, plus 10 settings that are nearly useless, with the
remaining 116 settings being either redundant or useless.

   None of these settings have any effect on the contents of comments
(the text after a `c' or `C' in Column 1, for example) or of character
or Hollerith constants.  Note that things like the `E' in the statement
`CALL FOO(3.2E10)' and the `TO' in `ASSIGN 10 TO LAB' are considered
built-in keywords, and so are affected by these settings.

   Low-level switches are identified in this section as follows:

     A Source Case Conversion:

          0 Preserve (see Note 1)

          1 Convert to Upper Case

          2 Convert to Lower Case

     B Built-in Keyword Matching:

          0 Match Any Case (per-character basis)

          1 Match Upper Case Only

          2 Match Lower Case Only

          3 Match InitialCaps Only (see tables for spellings)

     C Built-in Intrinsic Matching:

          0 Match Any Case (per-character basis)

          1 Match Upper Case Only

          2 Match Lower Case Only

          3 Match InitialCaps Only (see tables for spellings)

     D User-defined Symbol Possibilities (warnings only):

          0 Allow Any Case (per-character basis)

          1 Allow Upper Case Only

          2 Allow Lower Case Only

          3 Allow InitialCaps Only (see Note 2)

   Note 1: `g77' eventually will support `NAMELIST' in a manner that is
consistent with these source switches--in the sense that input will be
expected to meet the same requirements as source code in terms of
matching symbol names and keywords (for the exponent letters).

   Currently, however, `NAMELIST' is supported by `libg2c', which
uppercases `NAMELIST' input and symbol names for matching.  This means
not only that `NAMELIST' output currently shows symbol (and keyword)
names in uppercase even if lower-case source conversion (option A2) is
selected, but that `NAMELIST' cannot be adequately supported when
source case preservation (option A0) is selected.

   If A0 is selected, a warning message will be output for each
`NAMELIST' statement to this effect.  The behavior of the program is
undefined at run time if two or more symbol names appear in a given
`NAMELIST' such that the names are identical when converted to upper
case (e.g. `NAMELIST /X/ VAR, Var, var').  For complete and total
elegance, perhaps there should be a warning when option A2 is selected,
since the output of NAMELIST is currently in uppercase but will someday
be lowercase (when a `libg77' is written), but that seems to be
overkill for a product in beta test.

   Note 2: Rules for InitialCaps names are:

   - Must be a single uppercase letter, *or*

   - Must start with an uppercase letter and contain at least one
     lowercase letter.

   So `A', `Ab', `ABc', `AbC', and `Abc' are valid InitialCaps names,
but `AB', `A2', and `ABC' are not.  Note that most, but not all,
built-in names meet these requirements--the exceptions are some of the
two-letter format specifiers, such as `BN' and `BZ'.

   Here are the names of the corresponding command-line options:

     A0: -fsource-case-preserve
     A1: -fsource-case-upper
     A2: -fsource-case-lower
     
     B0: -fmatch-case-any
     B1: -fmatch-case-upper
     B2: -fmatch-case-lower
     B3: -fmatch-case-initcap
     
     C0: -fintrin-case-any
     C1: -fintrin-case-upper
     C2: -fintrin-case-lower
     C3: -fintrin-case-initcap
     
     D0: -fsymbol-case-any
     D1: -fsymbol-case-upper
     D2: -fsymbol-case-lower
     D3: -fsymbol-case-initcap

   Useful combinations of the above settings, along with abbreviated
option names that set some of these combinations all at once:

      1: A0--  B0---  C0---  D0---    -fcase-preserve
      2: A0--  B0---  C0---  D-1--
      3: A0--  B0---  C0---  D--2-
      4: A0--  B0---  C0---  D---3
      5: A0--  B0---  C-1--  D0---
      6: A0--  B0---  C-1--  D-1--
      7: A0--  B0---  C-1--  D--2-
      8: A0--  B0---  C-1--  D---3
      9: A0--  B0---  C--2-  D0---
     10: A0--  B0---  C--2-  D-1--
     11: A0--  B0---  C--2-  D--2-
     12: A0--  B0---  C--2-  D---3
     13: A0--  B0---  C---3  D0---
     14: A0--  B0---  C---3  D-1--
     15: A0--  B0---  C---3  D--2-
     16: A0--  B0---  C---3  D---3
     17: A0--  B-1--  C0---  D0---
     18: A0--  B-1--  C0---  D-1--
     19: A0--  B-1--  C0---  D--2-
     20: A0--  B-1--  C0---  D---3
     21: A0--  B-1--  C-1--  D0---
     22: A0--  B-1--  C-1--  D-1--    -fcase-strict-upper
     23: A0--  B-1--  C-1--  D--2-
     24: A0--  B-1--  C-1--  D---3
     25: A0--  B-1--  C--2-  D0---
     26: A0--  B-1--  C--2-  D-1--
     27: A0--  B-1--  C--2-  D--2-
     28: A0--  B-1--  C--2-  D---3
     29: A0--  B-1--  C---3  D0---
     30: A0--  B-1--  C---3  D-1--
     31: A0--  B-1--  C---3  D--2-
     32: A0--  B-1--  C---3  D---3
     33: A0--  B--2-  C0---  D0---
     34: A0--  B--2-  C0---  D-1--
     35: A0--  B--2-  C0---  D--2-
     36: A0--  B--2-  C0---  D---3
     37: A0--  B--2-  C-1--  D0---
     38: A0--  B--2-  C-1--  D-1--
     39: A0--  B--2-  C-1--  D--2-
     40: A0--  B--2-  C-1--  D---3
     41: A0--  B--2-  C--2-  D0---
     42: A0--  B--2-  C--2-  D-1--
     43: A0--  B--2-  C--2-  D--2-    -fcase-strict-lower
     44: A0--  B--2-  C--2-  D---3
     45: A0--  B--2-  C---3  D0---
     46: A0--  B--2-  C---3  D-1--
     47: A0--  B--2-  C---3  D--2-
     48: A0--  B--2-  C---3  D---3
     49: A0--  B---3  C0---  D0---
     50: A0--  B---3  C0---  D-1--
     51: A0--  B---3  C0---  D--2-
     52: A0--  B---3  C0---  D---3
     53: A0--  B---3  C-1--  D0---
     54: A0--  B---3  C-1--  D-1--
     55: A0--  B---3  C-1--  D--2-
     56: A0--  B---3  C-1--  D---3
     57: A0--  B---3  C--2-  D0---
     58: A0--  B---3  C--2-  D-1--
     59: A0--  B---3  C--2-  D--2-
     60: A0--  B---3  C--2-  D---3
     61: A0--  B---3  C---3  D0---
     62: A0--  B---3  C---3  D-1--
     63: A0--  B---3  C---3  D--2-
     64: A0--  B---3  C---3  D---3    -fcase-initcap
     65: A-1-  B01--  C01--  D01--    -fcase-upper
     66: A--2  B0-2-  C0-2-  D0-2-    -fcase-lower

   Number 22 is the "strict" ANSI FORTRAN 77 model wherein all input
(except comments, character constants, and Hollerith strings) must be
entered in uppercase.  Use `-fcase-strict-upper' to specify this
combination.

   Number 43 is like Number 22 except all input must be lowercase.  Use
`-fcase-strict-lower' to specify this combination.

   Number 65 is the "classic" ANSI FORTRAN 77 model as implemented on
many non-UNIX machines whereby all the source is translated to
uppercase.  Use `-fcase-upper' to specify this combination.

   Number 66 is the "canonical" UNIX model whereby all the source is
translated to lowercase.  Use `-fcase-lower' to specify this
combination.

   There are a few nearly useless combinations:

     67: A-1-  B01--  C01--  D--2-
     68: A-1-  B01--  C01--  D---3
     69: A-1-  B01--  C--23  D01--
     70: A-1-  B01--  C--23  D--2-
     71: A-1-  B01--  C--23  D---3
     72: A--2  B01--  C0-2-  D-1--
     73: A--2  B01--  C0-2-  D---3
     74: A--2  B01--  C-1-3  D0-2-
     75: A--2  B01--  C-1-3  D-1--
     76: A--2  B01--  C-1-3  D---3

   The above allow some programs to be compiled but with restrictions
that make most useful programs impossible: Numbers 67 and 72 warn about
_any_ user-defined symbol names (such as `SUBROUTINE FOO'); Numbers 68
and 73 warn about any user-defined symbol names longer than one
character that don't have at least one non-alphabetic character after
the first; Numbers 69 and 74 disallow any references to intrinsics; and
Numbers 70, 71, 75, and 76 are combinations of the restrictions in
67+69, 68+69, 72+74, and 73+74, respectively.

   All redundant combinations are shown in the above tables anyplace
where more than one setting is shown for a low-level switch.  For
example, `B0-2-' means either setting 0 or 2 is valid for switch B.
The "proper" setting in such a case is the one that copies the setting
of switch A--any other setting might slightly reduce the speed of the
compiler, though possibly to an unmeasurable extent.

   All remaining combinations are useless in that they prevent
successful compilation of non-null source files (source files with
something other than comments).


File: g77,  Node: VXT Fortran,  Next: Fortran 90,  Prev: Case Sensitivity,  Up: Other Dialects

11.6 VXT Fortran
================

   `g77' supports certain constructs that have different meanings in
VXT Fortran than they do in the GNU Fortran language.

   Generally, this manual uses the invented term VXT Fortran to refer
VAX FORTRAN (circa v4).  That compiler offered many popular features,
though not necessarily those that are specific to the VAX processor
architecture, the VMS operating system, or Digital Equipment
Corporation's Fortran product line.  (VAX and VMS probably are
trademarks of Digital Equipment Corporation.)

   An extension offered by a Digital Fortran product that also is
offered by several other Fortran products for different kinds of
systems is probably going to be considered for inclusion in `g77'
someday, and is considered a VXT Fortran feature.

   The `-fvxt' option generally specifies that, where the meaning of a
construct is ambiguous (means one thing in GNU Fortran and another in
VXT Fortran), the VXT Fortran meaning is to be assumed.

* Menu:

* Double Quote Meaning::  `"2000' as octal constant.
* Exclamation Point::     `!' in column 6.


File: g77,  Node: Double Quote Meaning,  Next: Exclamation Point,  Up: VXT Fortran

11.6.1 Meaning of Double Quote
------------------------------

   `g77' treats double-quote (`"') as beginning an octal constant of
`INTEGER(KIND=1)' type when the `-fvxt' option is specified.  The form
of this octal constant is

     "OCTAL-DIGITS

where OCTAL-DIGITS is a nonempty string of characters in the set
`01234567'.

   For example, the `-fvxt' option permits this:

     PRINT *, "20
     END

The above program would print the value `16'.

   *Note Integer Type::, for information on the preferred construct for
integer constants specified using GNU Fortran's octal notation.

   (In the GNU Fortran language, the double-quote character (`"')
delimits a character constant just as does apostrophe (`'').  There is
no way to allow both constructs in the general case, since statements
like `PRINT *,"2000 !comment?"' would be ambiguous.)


File: g77,  Node: Exclamation Point,  Prev: Double Quote Meaning,  Up: VXT Fortran

11.6.2 Meaning of Exclamation Point in Column 6
-----------------------------------------------

   `g77' treats an exclamation point (`!') in column 6 of a fixed-form
source file as a continuation character rather than as the beginning of
a comment (as it does in any other column) when the `-fvxt' option is
specified.

   The following program, when run, prints a message indicating whether
it is interpreted according to GNU Fortran (and Fortran 90) rules or
VXT Fortran rules:

     C234567  (This line begins in column 1.)
           I = 0
          !1
           IF (I.EQ.0) PRINT *, ' I am a VXT Fortran program'
           IF (I.EQ.1) PRINT *, ' I am a Fortran 90 program'
           IF (I.LT.0 .OR. I.GT.1) PRINT *, ' I am a HAL 9000 computer'
           END

   (In the GNU Fortran and Fortran 90 languages, exclamation point is a
valid character and, unlike space (<SPC>) or zero (`0'), marks a line
as a continuation line when it appears in column 6.)


File: g77,  Node: Fortran 90,  Next: Pedantic Compilation,  Prev: VXT Fortran,  Up: Other Dialects

11.7 Fortran 90
===============

   The GNU Fortran language includes a number of features that are part
of Fortran 90, even when the `-ff90' option is not specified.  The
features enabled by `-ff90' are intended to be those that, when `-ff90'
is not specified, would have another meaning to `g77'--usually meaning
something invalid in the GNU Fortran language.

   So, the purpose of `-ff90' is not to specify whether `g77' is to
gratuitously reject Fortran 90 constructs.  The `-pedantic' option
specified with `-fno-f90' is intended to do that, although its
implementation is certainly incomplete at this point.

   When `-ff90' is specified:

   * The type of `REAL(EXPR)' and `AIMAG(EXPR)', where EXPR is
     `COMPLEX' type, is the same type as the real part of EXPR.

     For example, assuming `Z' is type `COMPLEX(KIND=2)', `REAL(Z)'
     would return a value of type `REAL(KIND=2)', not of type
     `REAL(KIND=1)', since `-ff90' is specified.


File: g77,  Node: Pedantic Compilation,  Next: Distensions,  Prev: Fortran 90,  Up: Other Dialects

11.8 Pedantic Compilation
=========================

   The `-fpedantic' command-line option specifies that `g77' is to warn
about code that is not standard-conforming.  This is useful for finding
some extensions `g77' accepts that other compilers might not accept.
(Note that the `-pedantic' and `-pedantic-errors' options always imply
`-fpedantic'.)

   With `-fno-f90' in force, ANSI FORTRAN 77 is used as the standard
for conforming code.  With `-ff90' in force, Fortran 90 is used.

   The constructs for which `g77' issues diagnostics when `-fpedantic'
and `-fno-f90' are in force are:

   * Automatic arrays, as in

          SUBROUTINE X(N)
          REAL A(N)
          ...

     where `A' is not listed in any `ENTRY' statement, and thus is not
     a dummy argument.

   * The commas in `READ (5), I' and `WRITE (10), J'.

     These commas are disallowed by FORTRAN 77, but, while strictly
     superfluous, are syntactically elegant, especially given that
     commas are required in statements such as `READ 99, I' and `PRINT
     *, J'.  Many compilers permit the superfluous commas for this
     reason.

   * `DOUBLE COMPLEX', either explicitly or implicitly.

     An explicit use of this type is via a `DOUBLE COMPLEX' or
     `IMPLICIT DOUBLE COMPLEX' statement, for examples.

     An example of an implicit use is the expression `C*D', where `C'
     is `COMPLEX(KIND=1)' and `D' is `DOUBLE PRECISION'.  This
     expression is prohibited by ANSI FORTRAN 77 because the rules of
     promotion would suggest that it produce a `DOUBLE COMPLEX'
     result--a type not provided for by that standard.

   * Automatic conversion of numeric expressions to `INTEGER(KIND=1)'
     in contexts such as:

        - Array-reference indexes.

        - Alternate-return values.

        - Computed `GOTO'.

        - `FORMAT' run-time expressions (not yet supported).

        - Dimension lists in specification statements.

        - Numbers for I/O statements (such as `READ (UNIT=3.2), I')

        - Sizes of `CHARACTER' entities in specification statements.

        - Kind types in specification entities (a Fortran 90 feature).

        - Initial, terminal, and incrementation parameters for
          implied-`DO' constructs in `DATA' statements.

   * Automatic conversion of `LOGICAL' expressions to `INTEGER' in
     contexts such as arithmetic `IF' (where `COMPLEX' expressions are
     disallowed anyway).

   * Zero-size array dimensions, as in:

          INTEGER I(10,20,4:2)

   * Zero-length `CHARACTER' entities, as in:

          PRINT *, ''

   * Substring operators applied to character constants and named
     constants, as in:

          PRINT *, 'hello'(3:5)

   * Null arguments passed to statement function, as in:

          PRINT *, FOO(,3)

   * Disagreement among program units regarding whether a given `COMMON'
     area is `SAVE'd (for targets where program units in a single source
     file are "glued" together as they typically are for UNIX
     development environments).

   * Disagreement among program units regarding the size of a named
     `COMMON' block.

   * Specification statements following first `DATA' statement.

     (In the GNU Fortran language, `DATA I/1/' may be followed by
     `INTEGER J', but not `INTEGER I'.  The `-fpedantic' option
     disallows both of these.)

   * Semicolon as statement separator, as in:

          CALL FOO; CALL BAR

   * Use of `&' in column 1 of fixed-form source (to indicate
     continuation).

   * Use of `CHARACTER' constants to initialize numeric entities, and
     vice versa.

   * Expressions having two arithmetic operators in a row, such as
     `X*-Y'.

   If `-fpedantic' is specified along with `-ff90', the following
constructs result in diagnostics:

   * Use of semicolon as a statement separator on a line that has an
     `INCLUDE' directive.


File: g77,  Node: Distensions,  Prev: Pedantic Compilation,  Up: Other Dialects

11.9 Distensions
================

   The `-fugly-*' command-line options determine whether certain
features supported by VAX FORTRAN and other such compilers, but
considered too ugly to be in code that can be changed to use safer
and/or more portable constructs, are accepted.  These are humorously
referred to as "distensions", extensions that just plain look ugly in
the harsh light of day.

* Menu:

* Ugly Implicit Argument Conversion::  Disabled via `-fno-ugly-args'.
* Ugly Assumed-Size Arrays::           Enabled via `-fugly-assumed'.
* Ugly Null Arguments::                Enabled via `-fugly-comma'.
* Ugly Complex Part Extraction::       Enabled via `-fugly-complex'.
* Ugly Conversion of Initializers::    Disabled via `-fno-ugly-init'.
* Ugly Integer Conversions::           Enabled via `-fugly-logint'.
* Ugly Assigned Labels::               Enabled via `-fugly-assign'.


File: g77,  Node: Ugly Implicit Argument Conversion,  Next: Ugly Assumed-Size Arrays,  Up: Distensions

11.9.1 Implicit Argument Conversion
-----------------------------------

   The `-fno-ugly-args' option disables passing typeless and Hollerith
constants as actual arguments in procedure invocations.  For example:

     CALL FOO(4HABCD)
     CALL BAR('123'O)

These constructs can be too easily used to create non-portable code,
but are not considered as "ugly" as others.  Further, they are widely
used in existing Fortran source code in ways that often are quite
portable.  Therefore, they are enabled by default.


File: g77,  Node: Ugly Assumed-Size Arrays,  Next: Ugly Null Arguments,  Prev: Ugly Implicit Argument Conversion,  Up: Distensions

11.9.2 Ugly Assumed-Size Arrays
-------------------------------

   The `-fugly-assumed' option enables the treatment of any array with
a final dimension specified as `1' as an assumed-size array, as if `*'
had been specified instead.

   For example, `DIMENSION X(1)' is treated as if it had read
`DIMENSION X(*)' if `X' is listed as a dummy argument in a preceding
`SUBROUTINE', `FUNCTION', or `ENTRY' statement in the same program unit.

   Use an explicit lower bound to avoid this interpretation.  For
example, `DIMENSION X(1:1)' is never treated as if it had read
`DIMENSION X(*)' or `DIMENSION X(1:*)'.  Nor is `DIMENSION X(2-1)'
affected by this option, since that kind of expression is unlikely to
have been intended to designate an assumed-size array.

   This option is used to prevent warnings being issued about apparent
out-of-bounds reference such as `X(2) = 99'.

   It also prevents the array from being used in contexts that disallow
assumed-size arrays, such as `PRINT *,X'.  In such cases, a diagnostic
is generated and the source file is not compiled.

   The construct affected by this option is used only in old code that
pre-exists the widespread acceptance of adjustable and assumed-size
arrays in the Fortran community.

   _Note:_ This option does not affect how `DIMENSION X(1)' is treated
if `X' is listed as a dummy argument only _after_ the `DIMENSION'
statement (presumably in an `ENTRY' statement).  For example,
`-fugly-assumed' has no effect on the following program unit:

     SUBROUTINE X
     REAL A(1)
     RETURN
     ENTRY Y(A)
     PRINT *, A
     END


File: g77,  Node: Ugly Complex Part Extraction,  Next: Ugly Conversion of Initializers,  Prev: Ugly Null Arguments,  Up: Distensions

11.9.3 Ugly Complex Part Extraction
-----------------------------------

   The `-fugly-complex' option enables use of the `REAL()' and `AIMAG()'
intrinsics with arguments that are `COMPLEX' types other than
`COMPLEX(KIND=1)'.

   With `-ff90' in effect, these intrinsics return the unconverted real
and imaginary parts (respectively) of their argument.

   With `-fno-f90' in effect, these intrinsics convert the real and
imaginary parts to `REAL(KIND=1)', and return the result of that
conversion.

   Due to this ambiguity, the GNU Fortran language defines these
constructs as invalid, except in the specific case where they are
entirely and solely passed as an argument to an invocation of the
`REAL()' intrinsic.  For example,

     REAL(REAL(Z))

is permitted even when `Z' is `COMPLEX(KIND=2)' and `-fno-ugly-complex'
is in effect, because the meaning is clear.

   `g77' enforces this restriction, unless `-fugly-complex' is
specified, in which case the appropriate interpretation is chosen and
no diagnostic is issued.

   *Note CMPAMBIG::, for information on how to cope with existing code
with unclear expectations of `REAL()' and `AIMAG()' with
`COMPLEX(KIND=2)' arguments.

   *Note RealPart Intrinsic::, for information on the `REALPART()'
intrinsic, used to extract the real part of a complex expression
without conversion.  *Note ImagPart Intrinsic::, for information on the
`IMAGPART()' intrinsic, used to extract the imaginary part of a complex
expression without conversion.


File: g77,  Node: Ugly Null Arguments,  Next: Ugly Complex Part Extraction,  Prev: Ugly Assumed-Size Arrays,  Up: Distensions

11.9.4 Ugly Null Arguments
--------------------------

   The `-fugly-comma' option enables use of a single trailing comma to
mean "pass an extra trailing null argument" in a list of actual
arguments to an external procedure, and use of an empty list of
arguments to such a procedure to mean "pass a single null argument".

   (Null arguments often are used in some procedure-calling schemes to
indicate omitted arguments.)

   For example, `CALL FOO(,)' means "pass two null arguments", rather
than "pass one null argument".  Also, `CALL BAR()' means "pass one null
argument".

   This construct is considered "ugly" because it does not provide an
elegant way to pass a single null argument that is syntactically
distinct from passing no arguments.  That is, this construct changes
the meaning of code that makes no use of the construct.

   So, with `-fugly-comma' in force, `CALL FOO()' and `I = JFUNC()'
pass a single null argument, instead of passing no arguments as
required by the Fortran 77 and 90 standards.

   _Note:_ Many systems gracefully allow the case where a procedure
call passes one extra argument that the called procedure does not
expect.

   So, in practice, there might be no difference in the behavior of a
program that does `CALL FOO()' or `I = JFUNC()' and is compiled with
`-fugly-comma' in force as compared to its behavior when compiled with
the default, `-fno-ugly-comma', in force, assuming `FOO' and `JFUNC' do
not expect any arguments to be passed.


File: g77,  Node: Ugly Conversion of Initializers,  Next: Ugly Integer Conversions,  Prev: Ugly Complex Part Extraction,  Up: Distensions

11.9.5 Ugly Conversion of Initializers
--------------------------------------

   The constructs disabled by `-fno-ugly-init' are:

   * Use of Hollerith and typeless constants in contexts where they set
     initial (compile-time) values for variables, arrays, and named
     constants--that is, `DATA' and `PARAMETER' statements, plus
     type-declaration statements specifying initial values.

     Here are some sample initializations that are disabled by the
     `-fno-ugly-init' option:

          PARAMETER (VAL='9A304FFE'X)
          REAL*8 STRING/8HOUTPUT00/
          DATA VAR/4HABCD/

   * In the same contexts as above, use of character constants to
     initialize numeric items and vice versa (one constant per item).

     Here are more sample initializations that are disabled by the
     `-fno-ugly-init' option:

          INTEGER IA
          CHARACTER BELL
          PARAMETER (IA = 'A')
          PARAMETER (BELL = 7)

   * Use of Hollerith and typeless constants on the right-hand side of
     assignment statements to numeric types, and in other contexts
     (such as passing arguments in invocations of intrinsic procedures
     and statement functions) that are treated as assignments to known
     types (the dummy arguments, in these cases).

     Here are sample statements that are disabled by the
     `-fno-ugly-init' option:

          IVAR = 4HABCD
          PRINT *, IMAX0(2HAB, 2HBA)

   The above constructs, when used, can tend to result in non-portable
code.  But, they are widely used in existing Fortran code in ways that
often are quite portable.  Therefore, they are enabled by default.


File: g77,  Node: Ugly Integer Conversions,  Next: Ugly Assigned Labels,  Prev: Ugly Conversion of Initializers,  Up: Distensions

11.9.6 Ugly Integer Conversions
-------------------------------

   The constructs enabled via `-fugly-logint' are:

   * Automatic conversion between `INTEGER' and `LOGICAL' as dictated by
     context (typically implies nonportable dependencies on how a
     particular implementation encodes `.TRUE.' and `.FALSE.').

   * Use of a `LOGICAL' variable in `ASSIGN' and assigned-`GOTO'
     statements.

   The above constructs are disabled by default because use of them
tends to lead to non-portable code.  Even existing Fortran code that
uses that often turns out to be non-portable, if not outright buggy.

   Some of this is due to differences among implementations as far as
how `.TRUE.' and `.FALSE.' are encoded as `INTEGER' values--Fortran
code that assumes a particular coding is likely to use one of the above
constructs, and is also likely to not work correctly on implementations
using different encodings.

   *Note Equivalence Versus Equality::, for more information.


File: g77,  Node: Ugly Assigned Labels,  Prev: Ugly Integer Conversions,  Up: Distensions

11.9.7 Ugly Assigned Labels
---------------------------

   The `-fugly-assign' option forces `g77' to use the same storage for
assigned labels as it would for a normal assignment to the same
variable.

   For example, consider the following code fragment:

     I = 3
     ASSIGN 10 TO I

Normally, for portability and improved diagnostics, `g77' reserves
distinct storage for a "sibling" of `I', used only for `ASSIGN'
statements to that variable (along with the corresponding
assigned-`GOTO' and assigned-`FORMAT'-I/O statements that reference the
variable).

   However, some code (that violates the ANSI FORTRAN 77 standard)
attempts to copy assigned labels among variables involved with `ASSIGN'
statements, as in:

     ASSIGN 10 TO I
     ISTATE(5) = I
     ...
     J = ISTATE(ICUR)
     GOTO J

Such code doesn't work under `g77' unless `-fugly-assign' is specified
on the command-line, ensuring that the value of `I' referenced in the
second line is whatever value `g77' uses to designate statement label
`10', so the value may be copied into the `ISTATE' array, later
retrieved into a variable of the appropriate type (`J'), and used as
the target of an assigned-`GOTO' statement.

   _Note:_ To avoid subtle program bugs, when `-fugly-assign' is
specified, `g77' requires the type of variables specified in
assigned-label contexts _must_ be the same type returned by `%LOC()'.
On many systems, this type is effectively the same as
`INTEGER(KIND=1)', while, on others, it is effectively the same as
`INTEGER(KIND=2)'.

   Do _not_ depend on `g77' actually writing valid pointers to these
variables, however.  While `g77' currently chooses that implementation,
it might be changed in the future.

   *Note Assigned Statement Labels (ASSIGN and GOTO): Assigned
Statement Labels, for implementation details on assigned-statement
labels.


File: g77,  Node: Compiler,  Next: Other Dialects,  Prev: Language,  Up: Top

12 The GNU Fortran Compiler
***************************

   The GNU Fortran compiler, `g77', supports programs written in the
GNU Fortran language and in some other dialects of Fortran.

   Some aspects of how `g77' works are universal regardless of dialect,
and yet are not properly part of the GNU Fortran language itself.
These are described below.

   _Note: This portion of the documentation definitely needs a lot of
work!_

* Menu:

* Compiler Limits::
* Run-time Environment Limits::
* Compiler Types::
* Compiler Constants::
* Compiler Intrinsics::


File: g77,  Node: Compiler Limits,  Next: Run-time Environment Limits,  Up: Compiler

12.1 Compiler Limits
====================

   `g77', as with GNU tools in general, imposes few arbitrary
restrictions on lengths of identifiers, number of continuation lines,
number of external symbols in a program, and so on.

   For example, some other Fortran compiler have an option (such as
`-NlX') to increase the limit on the number of continuation lines.
Also, some Fortran compilation systems have an option (such as `-NxX')
to increase the limit on the number of external symbols.

   `g77', `gcc', and GNU `ld' (the GNU linker) have no equivalent
options, since they do not impose arbitrary limits in these areas.

   `g77' does currently limit the number of dimensions in an array to
the same degree as do the Fortran standards--seven (7).  This
restriction might be lifted in a future version.


File: g77,  Node: Run-time Environment Limits,  Next: Compiler Types,  Prev: Compiler Limits,  Up: Compiler

12.2 Run-time Environment Limits
================================

   As a portable Fortran implementation, `g77' offers its users direct
access to, and otherwise depends upon, the underlying facilities of the
system used to build `g77', the system on which `g77' itself is used to
compile programs, and the system on which the `g77'-compiled program is
actually run.  (For most users, the three systems are of the same
type--combination of operating environment and hardware--often the same
physical system.)

   The run-time environment for a particular system inevitably imposes
some limits on a program's use of various system facilities.  These
limits vary from system to system.

   Even when such limits might be well beyond the possibility of being
encountered on a particular system, the `g77' run-time environment has
certain built-in limits, usually, but not always, stemming from
intrinsics with inherently limited interfaces.

   Currently, the `g77' run-time environment does not generally offer a
less-limiting environment by augmenting the underlying system's own
environment.

   Therefore, code written in the GNU Fortran language, while
syntactically and semantically portable, might nevertheless make
non-portable assumptions about the run-time environment--assumptions
that prove to be false for some particular environments.

   The GNU Fortran language, the `g77' compiler and run-time
environment, and the `g77' documentation do not yet offer comprehensive
portable work-arounds for such limits, though programmers should be
able to find their own in specific instances.

   Not all of the limitations are described in this document.  Some of
the known limitations include:

* Menu:

* Timer Wraparounds::
* Year 2000 (Y2K) Problems::
* Array Size::
* Character-variable Length::
* Year 10000 (Y10K) Problems::


File: g77,  Node: Timer Wraparounds,  Next: Year 2000 (Y2K) Problems,  Up: Run-time Environment Limits

12.2.1 Timer Wraparounds
------------------------

   Intrinsics that return values computed from system timers, whether
elapsed (wall-clock) timers, process CPU timers, or other kinds of
timers, are prone to experiencing wrap-around errors (or returning
wrapped-around values from successive calls) due to insufficient ranges
offered by the underlying system's timers.

   Some of the symptoms of such behaviors include apparently negative
time being computed for a duration, an extremely short amount of time
being computed for a long duration, and an extremely long amount of
time being computed for a short duration.

   See the following for intrinsics known to have potential problems in
these areas on at least some systems: *Note CPU_Time Intrinsic::, *Note
DTime Intrinsic (function)::, *Note DTime Intrinsic (subroutine)::,
*Note ETime Intrinsic (function)::, *Note ETime Intrinsic
(subroutine)::, *Note MClock Intrinsic::, *Note MClock8 Intrinsic::,
*Note Secnds Intrinsic::, *Note Second Intrinsic (function)::, *Note
Second Intrinsic (subroutine)::, *Note System_Clock Intrinsic::, *Note
Time Intrinsic (UNIX)::, *Note Time Intrinsic (VXT)::, *Note Time8
Intrinsic::.


File: g77,  Node: Year 2000 (Y2K) Problems,  Next: Array Size,  Prev: Timer Wraparounds,  Up: Run-time Environment Limits

12.2.2 Year 2000 (Y2K) Problems
-------------------------------

   While the `g77' compiler itself is believed to be Year-2000 (Y2K)
compliant, some intrinsics are not, and, potentially, some underlying
systems are not, perhaps rendering some Y2K-compliant intrinsics
non-compliant when used on those particular systems.

   Fortran code that uses non-Y2K-compliant intrinsics (listed below)
is, itself, almost certainly not compliant, and should be modified to
use Y2K-compliant intrinsics instead.

   Fortran code that uses no non-Y2K-compliant intrinsics, but which
currently is running on a non-Y2K-compliant system, can be made more
Y2K compliant by compiling and linking it for use on a new
Y2K-compliant system, such as a new version of an old,
non-Y2K-compliant, system.

   Currently, information on Y2K and related issues is being maintained
at `http://www.gnu.org/software/year2000-list.html'.

   See the following for intrinsics known to have potential problems in
these areas on at least some systems: *Note Date Intrinsic::, *Note
IDate Intrinsic (VXT)::.

   The `libg2c' library shipped with any `g77' that warns about
invocation of a non-Y2K-compliant intrinsic has renamed the `EXTERNAL'
procedure names of those intrinsics.  This is done so that the `libg2c'
implementations of these intrinsics cannot be directly linked to as
`EXTERNAL' names (which normally would avoid the non-Y2K-intrinsic
warning).

   The renamed forms of the `EXTERNAL' names of these renamed procedures
may be linked to by appending the string `_y2kbug' to the name of the
procedure in the source code.  For example:

     CHARACTER*20 STR
     INTEGER YY, MM, DD
     EXTERNAL DATE_Y2KBUG, VXTIDATE_Y2KBUG
     CALL DATE_Y2KBUG (STR)
     CALL VXTIDATE_Y2KBUG (MM, DD, YY)

   (Note that the `EXTERNAL' statement is not actually required, since
the modified names are not recognized as intrinsics by the current
version of `g77'.  But it is shown in this specific case, for purposes
of illustration.)

   The renaming of `EXTERNAL' procedure names of these intrinsics
causes unresolved references at link time.  For example, `EXTERNAL
DATE; CALL DATE(STR)' is normally compiled by `g77' as, in C,
`date_(&str, 20);'.  This, in turn, links to the `date_' procedure in
the `libE77' portion of `libg2c', which purposely calls a nonexistent
procedure named `G77_date_y2kbuggy_0'.  The resulting link-time error
is designed, via this name, to encourage the programmer to look up the
index entries to this portion of the `g77' documentation.

   Generally, we recommend that the `EXTERNAL' method of invoking
procedures in `libg2c' _not_ be used.  When used, some of the
correctness checking normally performed by `g77' is skipped.

   In particular, it is probably better to use the `INTRINSIC' method
of invoking non-Y2K-compliant procedures, so anyone compiling the code
can quickly notice the potential Y2K problems (via the warnings
printing by `g77') without having to even look at the code itself.

   If there are problems linking `libg2c' to code compiled by `g77'
that involve the string `y2kbug', and these are not explained above,
that probably indicates that a version of `libg2c' older than `g77' is
being linked to, or that the new library is being linked to code
compiled by an older version of `g77'.

   That's because, as of the version that warns about non-Y2K-compliant
intrinsic invocation, `g77' references the `libg2c' implementations of
those intrinsics using new names, containing the string `y2kbug'.

   So, linking newly-compiled code (invoking one of the intrinsics in
question) to an old library might yield an unresolved reference to
`G77_date_y2kbug_0'.  (The old library calls it `G77_date_0'.)

   Similarly, linking previously-compiled code to a new library might
yield an unresolved reference to `G77_vxtidate_0'.  (The new library
calls it `G77_vxtidate_y2kbug_0'.)

   The proper fix for the above problems is to obtain the latest
release of `g77' and related products (including `libg2c') and install
them on all systems, then recompile, relink, and install (as
appropriate) all existing Fortran programs.

   (Normally, this sort of renaming is steadfastly avoided.  In this
case, however, it seems more important to highlight potential Y2K
problems than to ease the transition of potentially non-Y2K-compliant
code to new versions of `g77' and `libg2c'.)


File: g77,  Node: Array Size,  Next: Character-variable Length,  Prev: Year 2000 (Y2K) Problems,  Up: Run-time Environment Limits

12.2.3 Array Size
-----------------

   Currently, `g77' uses the default `INTEGER' type for array indexes,
which limits the sizes of single-dimension arrays on systems offering a
larger address space than can be addressed by that type.  (That `g77'
puts all arrays in memory could be considered another limitation--it
could use large temporary files--but that decision is left to the
programmer as an implementation choice by most Fortran implementations.)

   It is not yet clear whether this limitation never, sometimes, or
always applies to the sizes of multiple-dimension arrays as a whole.

   For example, on a system with 64-bit addresses and 32-bit default
`INTEGER', an array with a size greater than can be addressed by a
32-bit offset can be declared using multiple dimensions.  Such an array
is therefore larger than a single-dimension array can be, on the same
system.

   Whether large multiple-dimension arrays are reliably supported
depends mostly on the `gcc' back end (code generator) used by `g77',
and has not yet been fully investigated.


File: g77,  Node: Character-variable Length,  Next: Year 10000 (Y10K) Problems,  Prev: Array Size,  Up: Run-time Environment Limits

12.2.4 Character-variable Length
--------------------------------

   Currently, `g77' uses the default `INTEGER' type for the lengths of
`CHARACTER' variables and array elements.

   This means that, for example, a system with a 64-bit address space
and a 32-bit default `INTEGER' type does not, under `g77', support a
`CHARACTER*N' declaration where N is greater than 2147483647.


File: g77,  Node: Year 10000 (Y10K) Problems,  Prev: Character-variable Length,  Up: Run-time Environment Limits

12.2.5 Year 10000 (Y10K) Problems
---------------------------------

   Most intrinsics returning, or computing values based on, date
information are prone to Year-10000 (Y10K) problems, due to supporting
only 4 digits for the year.

   See the following for examples: *Note FDate Intrinsic (function)::,
*Note FDate Intrinsic (subroutine)::, *Note IDate Intrinsic (UNIX)::,
*Note Time Intrinsic (VXT)::, *Note Date_and_Time Intrinsic::.


File: g77,  Node: Compiler Types,  Next: Compiler Constants,  Prev: Run-time Environment Limits,  Up: Compiler

12.3 Compiler Types
===================

   Fortran implementations have a fair amount of freedom given them by
the standard as far as how much storage space is used and how much
precision and range is offered by the various types such as
`LOGICAL(KIND=1)', `INTEGER(KIND=1)', `REAL(KIND=1)', `REAL(KIND=2)',
`COMPLEX(KIND=1)', and `CHARACTER'.  Further, many compilers offer
so-called `*N' notation, but the interpretation of N varies across
compilers and target architectures.

   The standard requires that `LOGICAL(KIND=1)', `INTEGER(KIND=1)', and
`REAL(KIND=1)' occupy the same amount of storage space, and that
`COMPLEX(KIND=1)' and `REAL(KIND=2)' take twice as much storage space
as `REAL(KIND=1)'.  Further, it requires that `COMPLEX(KIND=1)'
entities be ordered such that when a `COMPLEX(KIND=1)' variable is
storage-associated (such as via `EQUIVALENCE') with a two-element
`REAL(KIND=1)' array named `R', `R(1)' corresponds to the real element
and `R(2)' to the imaginary element of the `COMPLEX(KIND=1)' variable.

   (Few requirements as to precision or ranges of any of these are
placed on the implementation, nor is the relationship of storage sizes
of these types to the `CHARACTER' type specified, by the standard.)

   `g77' follows the above requirements, warning when compiling a
program requires placement of items in memory that contradict the
requirements of the target architecture.  (For example, a program can
require placement of a `REAL(KIND=2)' on a boundary that is not an even
multiple of its size, but still an even multiple of the size of a
`REAL(KIND=1)' variable.  On some target architectures, using the
canonical mapping of Fortran types to underlying architectural types,
such placement is prohibited by the machine definition or the
Application Binary Interface (ABI) in force for the configuration
defined for building `gcc' and `g77'.  `g77' warns about such
situations when it encounters them.)

   `g77' follows consistent rules for configuring the mapping between
Fortran types, including the `*N' notation, and the underlying
architectural types as accessed by a similarly-configured applicable
version of the `gcc' compiler.  These rules offer a widely portable,
consistent Fortran/C environment, although they might well conflict
with the expectations of users of Fortran compilers designed and
written for particular architectures.

   These rules are based on the configuration that is in force for the
version of `gcc' built in the same release as `g77' (and which was
therefore used to build both the `g77' compiler components and the
`libg2c' run-time library):

`REAL(KIND=1)'
     Same as `float' type.

`REAL(KIND=2)'
     Same as whatever floating-point type that is twice the size of a
     `float'--usually, this is a `double'.

`INTEGER(KIND=1)'
     Same as an integral type that is occupies the same amount of
     memory storage as `float'--usually, this is either an `int' or a
     `long int'.

`LOGICAL(KIND=1)'
     Same `gcc' type as `INTEGER(KIND=1)'.

`INTEGER(KIND=2)'
     Twice the size, and usually nearly twice the range, as
     `INTEGER(KIND=1)'--usually, this is either a `long int' or a `long
     long int'.

`LOGICAL(KIND=2)'
     Same `gcc' type as `INTEGER(KIND=2)'.

`INTEGER(KIND=3)'
     Same `gcc' type as signed `char'.

`LOGICAL(KIND=3)'
     Same `gcc' type as `INTEGER(KIND=3)'.

`INTEGER(KIND=6)'
     Twice the size, and usually nearly twice the range, as
     `INTEGER(KIND=3)'--usually, this is a `short'.

`LOGICAL(KIND=6)'
     Same `gcc' type as `INTEGER(KIND=6)'.

`COMPLEX(KIND=1)'
     Two `REAL(KIND=1)' scalars (one for the real part followed by one
     for the imaginary part).

`COMPLEX(KIND=2)'
     Two `REAL(KIND=2)' scalars.

`NUMERIC-TYPE*N'
     (Where NUMERIC-TYPE is any type other than `CHARACTER'.)  Same as
     whatever `gcc' type occupies N times the storage space of a `gcc'
     `char' item.

`DOUBLE PRECISION'
     Same as `REAL(KIND=2)'.

`DOUBLE COMPLEX'
     Same as `COMPLEX(KIND=2)'.

   Note that the above are proposed correspondences and might change in
future versions of `g77'--avoid writing code depending on them.

   Other types supported by `g77' are derived from gcc types such as
`char', `short', `int', `long int', `long long int', `long double', and
so on.  That is, whatever types `gcc' already supports, `g77' supports
now or probably will support in a future version.  The rules for the
`NUMERIC-TYPE*N' notation apply to these types, and new values for
`NUMERIC-TYPE(KIND=N)' will be assigned in a way that encourages
clarity, consistency, and portability.


File: g77,  Node: Compiler Constants,  Next: Compiler Intrinsics,  Prev: Compiler Types,  Up: Compiler

12.4 Compiler Constants
=======================

   `g77' strictly assigns types to _all_ constants not documented as
"typeless" (typeless constants including `'1'Z', for example).  Many
other Fortran compilers attempt to assign types to typed constants
based on their context.  This results in hard-to-find bugs, nonportable
code, and is not in the spirit (though it strictly follows the letter)
of the 77 and 90 standards.

   `g77' might offer, in a future release, explicit constructs by which
a wider variety of typeless constants may be specified, and/or
user-requested warnings indicating places where `g77' might differ from
how other compilers assign types to constants.

   *Note Context-Sensitive Constants::, for more information on this
issue.


File: g77,  Node: Compiler Intrinsics,  Prev: Compiler Constants,  Up: Compiler

12.5 Compiler Intrinsics
========================

   `g77' offers an ever-widening set of intrinsics.  Currently these
all are procedures (functions and subroutines).

   Some of these intrinsics are unimplemented, but their names reserved
to reduce future problems with existing code as they are implemented.
Others are implemented as part of the GNU Fortran language, while yet
others are provided for compatibility with other dialects of Fortran
but are not part of the GNU Fortran language.

   To manage these distinctions, `g77' provides intrinsic _groups_, a
facility that is simply an extension of the intrinsic groups provided
by the GNU Fortran language.

* Menu:

* Intrinsic Groups::  How intrinsics are grouped for easy management.
* Other Intrinsics::  Intrinsics other than those in the GNU
                       Fortran language.


File: g77,  Node: Intrinsic Groups,  Next: Other Intrinsics,  Up: Compiler Intrinsics

12.5.1 Intrinsic Groups
-----------------------

   A given specific intrinsic belongs in one or more groups.  Each
group is deleted, disabled, hidden, or enabled by default or a
command-line option.  The meaning of each term follows.

Deleted
     No intrinsics are recognized as belonging to that group.

Disabled
     Intrinsics are recognized as belonging to the group, but
     references to them (other than via the `INTRINSIC' statement) are
     disallowed through that group.

Hidden
     Intrinsics in that group are recognized and enabled (if
     implemented) _only_ if the first mention of the actual name of an
     intrinsic in a program unit is in an `INTRINSIC' statement.

Enabled
     Intrinsics in that group are recognized and enabled (if
     implemented).

   The distinction between deleting and disabling a group is illustrated
by the following example.  Assume intrinsic `FOO' belongs only to group
`FGR'.  If group `FGR' is deleted, the following program unit will
successfully compile, because `FOO()' will be seen as a reference to an
external function named `FOO':

     PRINT *, FOO()
     END

If group `FGR' is disabled, compiling the above program will produce
diagnostics, either because the `FOO' intrinsic is improperly invoked
or, if properly invoked, it is not enabled.  To change the above
program so it references an external function `FOO' instead of the
disabled `FOO' intrinsic, add the following line to the top:

     EXTERNAL FOO

So, deleting a group tells `g77' to pretend as though the intrinsics in
that group do not exist at all, whereas disabling it tells `g77' to
recognize them as (disabled) intrinsics in intrinsic-like contexts.

   Hiding a group is like enabling it, but the intrinsic must be first
named in an `INTRINSIC' statement to be considered a reference to the
intrinsic rather than to an external procedure.  This might be the
"safest" way to treat a new group of intrinsics when compiling old
code, because it allows the old code to be generally written as if
those new intrinsics never existed, but to be changed to use them by
inserting `INTRINSIC' statements in the appropriate places.  However,
it should be the goal of development to use `EXTERNAL' for all names of
external procedures that might be intrinsic names.

   If an intrinsic is in more than one group, it is enabled if any of
its containing groups are enabled; if not so enabled, it is hidden if
any of its containing groups are hidden; if not so hidden, it is
disabled if any of its containing groups are disabled; if not so
disabled, it is deleted.  This extra complication is necessary because
some intrinsics, such as `IBITS', belong to more than one group, and
hence should be enabled if any of the groups to which they belong are
enabled, and so on.

   The groups are:

`badu77'
     UNIX intrinsics having inappropriate forms (usually functions that
     have intended side effects).

`gnu'
     Intrinsics the GNU Fortran language supports that are extensions to
     the Fortran standards (77 and 90).

`f2c'
     Intrinsics supported by AT&T's `f2c' converter and/or `libf2c'.

`f90'
     Fortran 90 intrinsics.

`mil'
     MIL-STD 1753 intrinsics (`MVBITS', `IAND', `BTEST', and so on).

`unix'
     UNIX intrinsics (`IARGC', `EXIT', `ERF', and so on).

`vxt'
     VAX/VMS FORTRAN (current as of v4) intrinsics.


File: g77,  Node: Other Intrinsics,  Prev: Intrinsic Groups,  Up: Compiler Intrinsics

12.5.2 Other Intrinsics
-----------------------

   `g77' supports intrinsics other than those in the GNU Fortran
language proper.  This set of intrinsics is described below.

   (Note that the empty lines appearing in the menu below are not
intentional--they result from a bug in the `makeinfo' program.)

* Menu:


* ACosD Intrinsic::     (Reserved for future use.)

* AIMax0 Intrinsic::    (Reserved for future use.)
* AIMin0 Intrinsic::    (Reserved for future use.)

* AJMax0 Intrinsic::    (Reserved for future use.)
* AJMin0 Intrinsic::    (Reserved for future use.)

* ASinD Intrinsic::     (Reserved for future use.)

* ATan2D Intrinsic::    (Reserved for future use.)
* ATanD Intrinsic::     (Reserved for future use.)

* BITest Intrinsic::    (Reserved for future use.)

* BJTest Intrinsic::    (Reserved for future use.)

* CDAbs Intrinsic::     Absolute value (archaic).
* CDCos Intrinsic::     Cosine (archaic).
* CDExp Intrinsic::     Exponential (archaic).
* CDLog Intrinsic::     Natural logarithm (archaic).
* CDSin Intrinsic::     Sine (archaic).
* CDSqRt Intrinsic::    Square root (archaic).

* ChDir Intrinsic (function):: Change directory.

* ChMod Intrinsic (function):: Change file modes.

* CosD Intrinsic::      (Reserved for future use.)

* DACosD Intrinsic::    (Reserved for future use.)

* DASinD Intrinsic::    (Reserved for future use.)

* DATan2D Intrinsic::   (Reserved for future use.)
* DATanD Intrinsic::    (Reserved for future use.)
* Date Intrinsic::      Get current date as dd-Mon-yy.

* DbleQ Intrinsic::     (Reserved for future use.)

* DCmplx Intrinsic::    Construct `COMPLEX(KIND=2)' value.
* DConjg Intrinsic::    Complex conjugate (archaic).

* DCosD Intrinsic::     (Reserved for future use.)

* DFloat Intrinsic::    Conversion (archaic).

* DFlotI Intrinsic::    (Reserved for future use.)
* DFlotJ Intrinsic::    (Reserved for future use.)

* DImag Intrinsic::     Convert/extract imaginary part of complex (archaic).

* DReal Intrinsic::     Convert value to type `REAL(KIND=2)'.

* DSinD Intrinsic::     (Reserved for future use.)

* DTanD Intrinsic::     (Reserved for future use.)

* DTime Intrinsic (function):: Get elapsed time since last time.

* FGet Intrinsic (function):: Read a character from unit 5 stream-wise.

* FGetC Intrinsic (function):: Read a character stream-wise.

* FloatI Intrinsic::    (Reserved for future use.)
* FloatJ Intrinsic::    (Reserved for future use.)

* FPut Intrinsic (function):: Write a character to unit 6 stream-wise.

* FPutC Intrinsic (function):: Write a character stream-wise.

* IDate Intrinsic (VXT):: Get local time info (VAX/VMS).

* IIAbs Intrinsic::     (Reserved for future use.)
* IIAnd Intrinsic::     (Reserved for future use.)
* IIBClr Intrinsic::    (Reserved for future use.)
* IIBits Intrinsic::    (Reserved for future use.)
* IIBSet Intrinsic::    (Reserved for future use.)
* IIDiM Intrinsic::     (Reserved for future use.)
* IIDInt Intrinsic::    (Reserved for future use.)
* IIDNnt Intrinsic::    (Reserved for future use.)
* IIEOr Intrinsic::     (Reserved for future use.)
* IIFix Intrinsic::     (Reserved for future use.)
* IInt Intrinsic::      (Reserved for future use.)
* IIOr Intrinsic::      (Reserved for future use.)
* IIQint Intrinsic::    (Reserved for future use.)
* IIQNnt Intrinsic::    (Reserved for future use.)
* IIShftC Intrinsic::   (Reserved for future use.)
* IISign Intrinsic::    (Reserved for future use.)

* IMax0 Intrinsic::     (Reserved for future use.)
* IMax1 Intrinsic::     (Reserved for future use.)
* IMin0 Intrinsic::     (Reserved for future use.)
* IMin1 Intrinsic::     (Reserved for future use.)
* IMod Intrinsic::      (Reserved for future use.)

* INInt Intrinsic::     (Reserved for future use.)
* INot Intrinsic::      (Reserved for future use.)

* IZExt Intrinsic::     (Reserved for future use.)
* JIAbs Intrinsic::     (Reserved for future use.)
* JIAnd Intrinsic::     (Reserved for future use.)
* JIBClr Intrinsic::    (Reserved for future use.)
* JIBits Intrinsic::    (Reserved for future use.)
* JIBSet Intrinsic::    (Reserved for future use.)
* JIDiM Intrinsic::     (Reserved for future use.)
* JIDInt Intrinsic::    (Reserved for future use.)
* JIDNnt Intrinsic::    (Reserved for future use.)
* JIEOr Intrinsic::     (Reserved for future use.)
* JIFix Intrinsic::     (Reserved for future use.)
* JInt Intrinsic::      (Reserved for future use.)
* JIOr Intrinsic::      (Reserved for future use.)
* JIQint Intrinsic::    (Reserved for future use.)
* JIQNnt Intrinsic::    (Reserved for future use.)
* JIShft Intrinsic::    (Reserved for future use.)
* JIShftC Intrinsic::   (Reserved for future use.)
* JISign Intrinsic::    (Reserved for future use.)
* JMax0 Intrinsic::     (Reserved for future use.)
* JMax1 Intrinsic::     (Reserved for future use.)
* JMin0 Intrinsic::     (Reserved for future use.)
* JMin1 Intrinsic::     (Reserved for future use.)
* JMod Intrinsic::      (Reserved for future use.)
* JNInt Intrinsic::     (Reserved for future use.)
* JNot Intrinsic::      (Reserved for future use.)
* JZExt Intrinsic::     (Reserved for future use.)

* Kill Intrinsic (function):: Signal a process.

* Link Intrinsic (function):: Make hard link in file system.

* QAbs Intrinsic::      (Reserved for future use.)
* QACos Intrinsic::     (Reserved for future use.)
* QACosD Intrinsic::    (Reserved for future use.)
* QASin Intrinsic::     (Reserved for future use.)
* QASinD Intrinsic::    (Reserved for future use.)
* QATan Intrinsic::     (Reserved for future use.)
* QATan2 Intrinsic::    (Reserved for future use.)
* QATan2D Intrinsic::   (Reserved for future use.)
* QATanD Intrinsic::    (Reserved for future use.)
* QCos Intrinsic::      (Reserved for future use.)
* QCosD Intrinsic::     (Reserved for future use.)
* QCosH Intrinsic::     (Reserved for future use.)
* QDiM Intrinsic::      (Reserved for future use.)
* QExp Intrinsic::      (Reserved for future use.)
* QExt Intrinsic::      (Reserved for future use.)
* QExtD Intrinsic::     (Reserved for future use.)
* QFloat Intrinsic::    (Reserved for future use.)
* QInt Intrinsic::      (Reserved for future use.)
* QLog Intrinsic::      (Reserved for future use.)
* QLog10 Intrinsic::    (Reserved for future use.)
* QMax1 Intrinsic::     (Reserved for future use.)
* QMin1 Intrinsic::     (Reserved for future use.)
* QMod Intrinsic::      (Reserved for future use.)
* QNInt Intrinsic::     (Reserved for future use.)
* QSin Intrinsic::      (Reserved for future use.)
* QSinD Intrinsic::     (Reserved for future use.)
* QSinH Intrinsic::     (Reserved for future use.)
* QSqRt Intrinsic::     (Reserved for future use.)
* QTan Intrinsic::      (Reserved for future use.)
* QTanD Intrinsic::     (Reserved for future use.)
* QTanH Intrinsic::     (Reserved for future use.)

* Rename Intrinsic (function):: Rename file.

* Secnds Intrinsic::    Get local time offset since midnight.

* Signal Intrinsic (function):: Muck with signal handling.

* SinD Intrinsic::      (Reserved for future use.)

* SnglQ Intrinsic::     (Reserved for future use.)

* SymLnk Intrinsic (function):: Make symbolic link in file system.

* System Intrinsic (function):: Invoke shell (system) command.

* TanD Intrinsic::      (Reserved for future use.)

* Time Intrinsic (VXT):: Get the time as a character value.

* UMask Intrinsic (function):: Set file creation permissions mask.

* Unlink Intrinsic (function):: Unlink file.

* ZExt Intrinsic::      (Reserved for future use.)


File: g77,  Node: ACosD Intrinsic,  Next: AIMax0 Intrinsic,  Up: Other Intrinsics

12.5.2.1 ACosD Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ACosD' to use this name for an
external procedure.


File: g77,  Node: AIMax0 Intrinsic,  Next: AIMin0 Intrinsic,  Prev: ACosD Intrinsic,  Up: Other Intrinsics

12.5.2.2 AIMax0 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AIMax0' to use this name for an
external procedure.


File: g77,  Node: AIMin0 Intrinsic,  Next: AJMax0 Intrinsic,  Prev: AIMax0 Intrinsic,  Up: Other Intrinsics

12.5.2.3 AIMin0 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AIMin0' to use this name for an
external procedure.


File: g77,  Node: AJMax0 Intrinsic,  Next: AJMin0 Intrinsic,  Prev: AIMin0 Intrinsic,  Up: Other Intrinsics

12.5.2.4 AJMax0 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AJMax0' to use this name for an
external procedure.


File: g77,  Node: AJMin0 Intrinsic,  Next: ASinD Intrinsic,  Prev: AJMax0 Intrinsic,  Up: Other Intrinsics

12.5.2.5 AJMin0 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL AJMin0' to use this name for an
external procedure.


File: g77,  Node: ASinD Intrinsic,  Next: ATan2D Intrinsic,  Prev: AJMin0 Intrinsic,  Up: Other Intrinsics

12.5.2.6 ASinD Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ASinD' to use this name for an
external procedure.


File: g77,  Node: ATan2D Intrinsic,  Next: ATanD Intrinsic,  Prev: ASinD Intrinsic,  Up: Other Intrinsics

12.5.2.7 ATan2D Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ATan2D' to use this name for an
external procedure.


File: g77,  Node: ATanD Intrinsic,  Next: BITest Intrinsic,  Prev: ATan2D Intrinsic,  Up: Other Intrinsics

12.5.2.8 ATanD Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ATanD' to use this name for an
external procedure.


File: g77,  Node: BITest Intrinsic,  Next: BJTest Intrinsic,  Prev: ATanD Intrinsic,  Up: Other Intrinsics

12.5.2.9 BITest Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL BITest' to use this name for an
external procedure.


File: g77,  Node: BJTest Intrinsic,  Next: CDAbs Intrinsic,  Prev: BITest Intrinsic,  Up: Other Intrinsics

12.5.2.10 BJTest Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL BJTest' to use this name for an
external procedure.


File: g77,  Node: CDAbs Intrinsic,  Next: CDCos Intrinsic,  Prev: BJTest Intrinsic,  Up: Other Intrinsics

12.5.2.11 CDAbs Intrinsic
.........................

     CDAbs(A)

CDAbs: `REAL(KIND=2)' function.

A: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `ABS()' that is specific to one type for A.  *Note
Abs Intrinsic::.


File: g77,  Node: CDCos Intrinsic,  Next: CDExp Intrinsic,  Prev: CDAbs Intrinsic,  Up: Other Intrinsics

12.5.2.12 CDCos Intrinsic
.........................

     CDCos(X)

CDCos: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `COS()' that is specific to one type for X.  *Note
Cos Intrinsic::.


File: g77,  Node: CDExp Intrinsic,  Next: CDLog Intrinsic,  Prev: CDCos Intrinsic,  Up: Other Intrinsics

12.5.2.13 CDExp Intrinsic
.........................

     CDExp(X)

CDExp: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `EXP()' that is specific to one type for X.  *Note
Exp Intrinsic::.


File: g77,  Node: CDLog Intrinsic,  Next: CDSin Intrinsic,  Prev: CDExp Intrinsic,  Up: Other Intrinsics

12.5.2.14 CDLog Intrinsic
.........................

     CDLog(X)

CDLog: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `LOG()' that is specific to one type for X.  *Note
Log Intrinsic::.


File: g77,  Node: CDSin Intrinsic,  Next: CDSqRt Intrinsic,  Prev: CDLog Intrinsic,  Up: Other Intrinsics

12.5.2.15 CDSin Intrinsic
.........................

     CDSin(X)

CDSin: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `SIN()' that is specific to one type for X.  *Note
Sin Intrinsic::.


File: g77,  Node: CDSqRt Intrinsic,  Next: ChDir Intrinsic (function),  Prev: CDSin Intrinsic,  Up: Other Intrinsics

12.5.2.16 CDSqRt Intrinsic
..........................

     CDSqRt(X)

CDSqRt: `COMPLEX(KIND=2)' function.

X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `SQRT()' that is specific to one type for X.  *Note
SqRt Intrinsic::.


File: g77,  Node: ChDir Intrinsic (function),  Next: ChMod Intrinsic (function),  Prev: CDSqRt Intrinsic,  Up: Other Intrinsics

12.5.2.17 ChDir Intrinsic (function)
....................................

     ChDir(DIR)

ChDir: `INTEGER(KIND=1)' function.

DIR: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Sets the current working directory to be DIR.  Returns 0 on success
or a non-zero error code.  See `chdir(3)'.

   _Caution:_ Using this routine during I/O to a unit connected with a
non-absolute file name can cause subsequent I/O on such a unit to fail
because the I/O library might reopen files by name.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note ChDir
Intrinsic (subroutine)::.


File: g77,  Node: ChMod Intrinsic (function),  Next: CosD Intrinsic,  Prev: ChDir Intrinsic (function),  Up: Other Intrinsics

12.5.2.18 ChMod Intrinsic (function)
....................................

     ChMod(NAME, MODE)

ChMod: `INTEGER(KIND=1)' function.

NAME: `CHARACTER'; scalar; INTENT(IN).

MODE: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Changes the access mode of file NAME according to the specification
MODE, which is given in the format of `chmod(1)'.  A null character
(`CHAR(0)') marks the end of the name in NAME--otherwise, trailing
blanks in NAME are ignored.  Currently, NAME must not contain the
single quote character.

   Returns 0 on success or a non-zero error code otherwise.

   Note that this currently works by actually invoking `/bin/chmod' (or
the `chmod' found when the library was configured) and so might fail in
some circumstances and will, anyway, be slow.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note ChMod
Intrinsic (subroutine)::.


File: g77,  Node: CosD Intrinsic,  Next: DACosD Intrinsic,  Prev: ChMod Intrinsic (function),  Up: Other Intrinsics

12.5.2.19 CosD Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL CosD' to use this name for an
external procedure.


File: g77,  Node: DACosD Intrinsic,  Next: DASinD Intrinsic,  Prev: CosD Intrinsic,  Up: Other Intrinsics

12.5.2.20 DACosD Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DACosD' to use this name for an
external procedure.


File: g77,  Node: DASinD Intrinsic,  Next: DATan2D Intrinsic,  Prev: DACosD Intrinsic,  Up: Other Intrinsics

12.5.2.21 DASinD Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DASinD' to use this name for an
external procedure.


File: g77,  Node: DATan2D Intrinsic,  Next: DATanD Intrinsic,  Prev: DASinD Intrinsic,  Up: Other Intrinsics

12.5.2.22 DATan2D Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DATan2D' to use this name for
an external procedure.


File: g77,  Node: DATanD Intrinsic,  Next: Date Intrinsic,  Prev: DATan2D Intrinsic,  Up: Other Intrinsics

12.5.2.23 DATanD Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DATanD' to use this name for an
external procedure.


File: g77,  Node: Date Intrinsic,  Next: DbleQ Intrinsic,  Prev: DATanD Intrinsic,  Up: Other Intrinsics

12.5.2.24 Date Intrinsic
........................

     CALL Date(DATE)

DATE: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `vxt'.

Description:

   Returns DATE in the form `DD-MMM-YY', representing the numeric day
of the month DD, a three-character abbreviation of the month name MMM
and the last two digits of the year YY, e.g. `25-Nov-96'.

   This intrinsic is not recommended, due to the year 2000 approaching.
Therefore, programs making use of this intrinsic might not be Year 2000
(Y2K) compliant.  *Note CTime Intrinsic (subroutine)::, for information
on obtaining more digits for the current (or any) date.


File: g77,  Node: DbleQ Intrinsic,  Next: DCmplx Intrinsic,  Prev: Date Intrinsic,  Up: Other Intrinsics

12.5.2.25 DbleQ Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DbleQ' to use this name for an
external procedure.


File: g77,  Node: DCmplx Intrinsic,  Next: DConjg Intrinsic,  Prev: DbleQ Intrinsic,  Up: Other Intrinsics

12.5.2.26 DCmplx Intrinsic
..........................

     DCmplx(X, Y)

DCmplx: `COMPLEX(KIND=2)' function.

X: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Y: `INTEGER' or `REAL'; OPTIONAL (must be omitted if X is `COMPLEX');
scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   If X is not type `COMPLEX', constructs a value of type
`COMPLEX(KIND=2)' from the real and imaginary values specified by X and
Y, respectively.  If Y is omitted, `0D0' is assumed.

   If X is type `COMPLEX', converts it to type `COMPLEX(KIND=2)'.

   Although this intrinsic is not standard Fortran, it is a popular
extension offered by many compilers that support `DOUBLE COMPLEX',
since it offers the easiest way to convert to `DOUBLE COMPLEX' without
using Fortran 90 features (such as the `KIND=' argument to the
`CMPLX()' intrinsic).

   (`CMPLX(0D0, 0D0)' returns a single-precision `COMPLEX' result, as
required by standard FORTRAN 77.  That's why so many compilers provide
`DCMPLX()', since `DCMPLX(0D0, 0D0)' returns a `DOUBLE COMPLEX' result.
Still, `DCMPLX()' converts even `REAL*16' arguments to their `REAL*8'
equivalents in most dialects of Fortran, so neither it nor `CMPLX()'
allow easy construction of arbitrary-precision values without
potentially forcing a conversion involving extending or reducing
precision.  GNU Fortran provides such an intrinsic, called `COMPLEX()'.)

   *Note Complex Intrinsic::, for information on easily constructing a
`COMPLEX' value of arbitrary precision from `REAL' arguments.


File: g77,  Node: DConjg Intrinsic,  Next: DCosD Intrinsic,  Prev: DCmplx Intrinsic,  Up: Other Intrinsics

12.5.2.27 DConjg Intrinsic
..........................

     DConjg(Z)

DConjg: `COMPLEX(KIND=2)' function.

Z: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `CONJG()' that is specific to one type for Z.  *Note
Conjg Intrinsic::.


File: g77,  Node: DCosD Intrinsic,  Next: DFloat Intrinsic,  Prev: DConjg Intrinsic,  Up: Other Intrinsics

12.5.2.28 DCosD Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DCosD' to use this name for an
external procedure.


File: g77,  Node: DFloat Intrinsic,  Next: DFlotI Intrinsic,  Prev: DCosD Intrinsic,  Up: Other Intrinsics

12.5.2.29 DFloat Intrinsic
..........................

     DFloat(A)

DFloat: `REAL(KIND=2)' function.

A: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `REAL()' that is specific to one type for A.  *Note
Real Intrinsic::.


File: g77,  Node: DFlotI Intrinsic,  Next: DFlotJ Intrinsic,  Prev: DFloat Intrinsic,  Up: Other Intrinsics

12.5.2.30 DFlotI Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DFlotI' to use this name for an
external procedure.


File: g77,  Node: DFlotJ Intrinsic,  Next: DImag Intrinsic,  Prev: DFlotI Intrinsic,  Up: Other Intrinsics

12.5.2.31 DFlotJ Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DFlotJ' to use this name for an
external procedure.


File: g77,  Node: DImag Intrinsic,  Next: DReal Intrinsic,  Prev: DFlotJ Intrinsic,  Up: Other Intrinsics

12.5.2.32 DImag Intrinsic
.........................

     DImag(Z)

DImag: `REAL(KIND=2)' function.

Z: `COMPLEX(KIND=2)'; scalar; INTENT(IN).

Intrinsic groups: `f2c', `vxt'.

Description:

   Archaic form of `AIMAG()' that is specific to one type for Z.  *Note
AImag Intrinsic::.


File: g77,  Node: DReal Intrinsic,  Next: DSinD Intrinsic,  Prev: DImag Intrinsic,  Up: Other Intrinsics

12.5.2.33 DReal Intrinsic
.........................

     DReal(A)

DReal: `REAL(KIND=2)' function.

A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).

Intrinsic groups: `vxt'.

Description:

   Converts A to `REAL(KIND=2)'.

   If A is type `COMPLEX', its real part is converted (if necessary) to
`REAL(KIND=2)', and its imaginary part is disregarded.

   Although this intrinsic is not standard Fortran, it is a popular
extension offered by many compilers that support `DOUBLE COMPLEX',
since it offers the easiest way to extract the real part of a `DOUBLE
COMPLEX' value without using the Fortran 90 `REAL()' intrinsic in a way
that produces a return value inconsistent with the way many FORTRAN 77
compilers handle `REAL()' of a `DOUBLE COMPLEX' value.

   *Note RealPart Intrinsic::, for information on a GNU Fortran
intrinsic that avoids these areas of confusion.

   *Note Dble Intrinsic::, for information on the standard FORTRAN 77
replacement for `DREAL()'.

   *Note REAL() and AIMAG() of Complex::, for more information on this
issue.


File: g77,  Node: DSinD Intrinsic,  Next: DTanD Intrinsic,  Prev: DReal Intrinsic,  Up: Other Intrinsics

12.5.2.34 DSinD Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DSinD' to use this name for an
external procedure.


File: g77,  Node: DTanD Intrinsic,  Next: DTime Intrinsic (function),  Prev: DSinD Intrinsic,  Up: Other Intrinsics

12.5.2.35 DTanD Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL DTanD' to use this name for an
external procedure.


File: g77,  Node: DTime Intrinsic (function),  Next: FGet Intrinsic (function),  Prev: DTanD Intrinsic,  Up: Other Intrinsics

12.5.2.36 DTime Intrinsic (function)
....................................

     DTime(TARRAY)

DTime: `REAL(KIND=1)' function.

TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT).

Intrinsic groups: `badu77'.

Description:

   Initially, return the number of seconds of runtime since the start
of the process's execution as the function value, and the user and
system components of this in `TARRAY(1)' and `TARRAY(2)' respectively.
The functions' value is equal to `TARRAY(1) + TARRAY(2)'.

   Subsequent invocations of `DTIME()' return values accumulated since
the previous invocation.

   On some systems, the underlying timings are represented using types
with sufficiently small limits that overflows (wraparounds) are
possible, such as 32-bit types.  Therefore, the values returned by this
intrinsic might be, or become, negative, or numerically less than
previous values, during a single run of the compiled program.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note DTime
Intrinsic (subroutine)::.


File: g77,  Node: FGet Intrinsic (function),  Next: FGetC Intrinsic (function),  Prev: DTime Intrinsic (function),  Up: Other Intrinsics

12.5.2.37 FGet Intrinsic (function)
...................................

     FGet(C)

FGet: `INTEGER(KIND=1)' function.

C: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `badu77'.

Description:

   Reads a single character into C in stream mode from unit 5
(by-passing normal formatted input) using `getc(3)'.  Returns 0 on
success, -1 on end-of-file, and the error code from `ferror(3)'
otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FGet
Intrinsic (subroutine)::.


File: g77,  Node: FGetC Intrinsic (function),  Next: FloatI Intrinsic,  Prev: FGet Intrinsic (function),  Up: Other Intrinsics

12.5.2.38 FGetC Intrinsic (function)
....................................

     FGetC(UNIT, C)

FGetC: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

C: `CHARACTER'; scalar; INTENT(OUT).

Intrinsic groups: `badu77'.

Description:

   Reads a single character into C in stream mode from unit UNIT
(by-passing normal formatted output) using `getc(3)'.  Returns 0 on
success, -1 on end-of-file, and the error code from `ferror(3)'
otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FGetC
Intrinsic (subroutine)::.


File: g77,  Node: FloatI Intrinsic,  Next: FloatJ Intrinsic,  Prev: FGetC Intrinsic (function),  Up: Other Intrinsics

12.5.2.39 FloatI Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL FloatI' to use this name for an
external procedure.


File: g77,  Node: FloatJ Intrinsic,  Next: FPut Intrinsic (function),  Prev: FloatI Intrinsic,  Up: Other Intrinsics

12.5.2.40 FloatJ Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL FloatJ' to use this name for an
external procedure.


File: g77,  Node: FPut Intrinsic (function),  Next: FPutC Intrinsic (function),  Prev: FloatJ Intrinsic,  Up: Other Intrinsics

12.5.2.41 FPut Intrinsic (function)
...................................

     FPut(C)

FPut: `INTEGER(KIND=1)' function.

C: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Writes the single character C in stream mode to unit 6 (by-passing
normal formatted output) using `getc(3)'.  Returns 0 on success, the
error code from `ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FPut
Intrinsic (subroutine)::.


File: g77,  Node: FPutC Intrinsic (function),  Next: IDate Intrinsic (VXT),  Prev: FPut Intrinsic (function),  Up: Other Intrinsics

12.5.2.42 FPutC Intrinsic (function)
....................................

     FPutC(UNIT, C)

FPutC: `INTEGER(KIND=1)' function.

UNIT: `INTEGER'; scalar; INTENT(IN).

C: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Writes the single character C in stream mode to unit UNIT
(by-passing normal formatted output) using `putc(3)'.  Returns 0 on
success, the error code from `ferror(3)' otherwise.

   Stream I/O should not be mixed with normal record-oriented
(formatted or unformatted) I/O on the same unit; the results are
unpredictable.

   For information on other intrinsics with the same name: *Note FPutC
Intrinsic (subroutine)::.


File: g77,  Node: IDate Intrinsic (VXT),  Next: IIAbs Intrinsic,  Prev: FPutC Intrinsic (function),  Up: Other Intrinsics

12.5.2.43 IDate Intrinsic (VXT)
...............................

     CALL IDate(M, D, Y)

M: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

D: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

Y: `INTEGER(KIND=1)'; scalar; INTENT(OUT).

Intrinsic groups: `vxt'.

Description:

   Returns the numerical values of the current local time.  The month
(in the range 1-12) is returned in M, the day (in the range 1-7) in D,
and the year in Y (in the range 0-99).

   This intrinsic is not recommended, due to the year 2000 approaching.
Therefore, programs making use of this intrinsic might not be Year 2000
(Y2K) compliant.  For example, the date might appear, to such programs,
to wrap around (change from a larger value to a smaller one) as of the
Year 2000.

   *Note IDate Intrinsic (UNIX)::, for information on obtaining more
digits for the current date.

   For information on other intrinsics with the same name: *Note IDate
Intrinsic (UNIX)::.


File: g77,  Node: IIAbs Intrinsic,  Next: IIAnd Intrinsic,  Prev: IDate Intrinsic (VXT),  Up: Other Intrinsics

12.5.2.44 IIAbs Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIAbs' to use this name for an
external procedure.


File: g77,  Node: IIAnd Intrinsic,  Next: IIBClr Intrinsic,  Prev: IIAbs Intrinsic,  Up: Other Intrinsics

12.5.2.45 IIAnd Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIAnd' to use this name for an
external procedure.


File: g77,  Node: IIBClr Intrinsic,  Next: IIBits Intrinsic,  Prev: IIAnd Intrinsic,  Up: Other Intrinsics

12.5.2.46 IIBClr Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIBClr' to use this name for an
external procedure.


File: g77,  Node: IIBits Intrinsic,  Next: IIBSet Intrinsic,  Prev: IIBClr Intrinsic,  Up: Other Intrinsics

12.5.2.47 IIBits Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIBits' to use this name for an
external procedure.


File: g77,  Node: IIBSet Intrinsic,  Next: IIDiM Intrinsic,  Prev: IIBits Intrinsic,  Up: Other Intrinsics

12.5.2.48 IIBSet Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIBSet' to use this name for an
external procedure.


File: g77,  Node: IIDiM Intrinsic,  Next: IIDInt Intrinsic,  Prev: IIBSet Intrinsic,  Up: Other Intrinsics

12.5.2.49 IIDiM Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIDiM' to use this name for an
external procedure.


File: g77,  Node: IIDInt Intrinsic,  Next: IIDNnt Intrinsic,  Prev: IIDiM Intrinsic,  Up: Other Intrinsics

12.5.2.50 IIDInt Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIDInt' to use this name for an
external procedure.


File: g77,  Node: IIDNnt Intrinsic,  Next: IIEOr Intrinsic,  Prev: IIDInt Intrinsic,  Up: Other Intrinsics

12.5.2.51 IIDNnt Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIDNnt' to use this name for an
external procedure.


File: g77,  Node: IIEOr Intrinsic,  Next: IIFix Intrinsic,  Prev: IIDNnt Intrinsic,  Up: Other Intrinsics

12.5.2.52 IIEOr Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIEOr' to use this name for an
external procedure.


File: g77,  Node: IIFix Intrinsic,  Next: IInt Intrinsic,  Prev: IIEOr Intrinsic,  Up: Other Intrinsics

12.5.2.53 IIFix Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIFix' to use this name for an
external procedure.


File: g77,  Node: IInt Intrinsic,  Next: IIOr Intrinsic,  Prev: IIFix Intrinsic,  Up: Other Intrinsics

12.5.2.54 IInt Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IInt' to use this name for an
external procedure.


File: g77,  Node: IIOr Intrinsic,  Next: IIQint Intrinsic,  Prev: IInt Intrinsic,  Up: Other Intrinsics

12.5.2.55 IIOr Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIOr' to use this name for an
external procedure.


File: g77,  Node: IIQint Intrinsic,  Next: IIQNnt Intrinsic,  Prev: IIOr Intrinsic,  Up: Other Intrinsics

12.5.2.56 IIQint Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIQint' to use this name for an
external procedure.


File: g77,  Node: IIQNnt Intrinsic,  Next: IIShftC Intrinsic,  Prev: IIQint Intrinsic,  Up: Other Intrinsics

12.5.2.57 IIQNnt Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIQNnt' to use this name for an
external procedure.


File: g77,  Node: IIShftC Intrinsic,  Next: IISign Intrinsic,  Prev: IIQNnt Intrinsic,  Up: Other Intrinsics

12.5.2.58 IIShftC Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IIShftC' to use this name for
an external procedure.


File: g77,  Node: IISign Intrinsic,  Next: IMax0 Intrinsic,  Prev: IIShftC Intrinsic,  Up: Other Intrinsics

12.5.2.59 IISign Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IISign' to use this name for an
external procedure.


File: g77,  Node: IMax0 Intrinsic,  Next: IMax1 Intrinsic,  Prev: IISign Intrinsic,  Up: Other Intrinsics

12.5.2.60 IMax0 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMax0' to use this name for an
external procedure.


File: g77,  Node: IMax1 Intrinsic,  Next: IMin0 Intrinsic,  Prev: IMax0 Intrinsic,  Up: Other Intrinsics

12.5.2.61 IMax1 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMax1' to use this name for an
external procedure.


File: g77,  Node: IMin0 Intrinsic,  Next: IMin1 Intrinsic,  Prev: IMax1 Intrinsic,  Up: Other Intrinsics

12.5.2.62 IMin0 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMin0' to use this name for an
external procedure.


File: g77,  Node: IMin1 Intrinsic,  Next: IMod Intrinsic,  Prev: IMin0 Intrinsic,  Up: Other Intrinsics

12.5.2.63 IMin1 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMin1' to use this name for an
external procedure.


File: g77,  Node: IMod Intrinsic,  Next: INInt Intrinsic,  Prev: IMin1 Intrinsic,  Up: Other Intrinsics

12.5.2.64 IMod Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IMod' to use this name for an
external procedure.


File: g77,  Node: INInt Intrinsic,  Next: INot Intrinsic,  Prev: IMod Intrinsic,  Up: Other Intrinsics

12.5.2.65 INInt Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL INInt' to use this name for an
external procedure.


File: g77,  Node: INot Intrinsic,  Next: IZExt Intrinsic,  Prev: INInt Intrinsic,  Up: Other Intrinsics

12.5.2.66 INot Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL INot' to use this name for an
external procedure.


File: g77,  Node: IZExt Intrinsic,  Next: JIAbs Intrinsic,  Prev: INot Intrinsic,  Up: Other Intrinsics

12.5.2.67 IZExt Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL IZExt' to use this name for an
external procedure.


File: g77,  Node: JIAbs Intrinsic,  Next: JIAnd Intrinsic,  Prev: IZExt Intrinsic,  Up: Other Intrinsics

12.5.2.68 JIAbs Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIAbs' to use this name for an
external procedure.


File: g77,  Node: JIAnd Intrinsic,  Next: JIBClr Intrinsic,  Prev: JIAbs Intrinsic,  Up: Other Intrinsics

12.5.2.69 JIAnd Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIAnd' to use this name for an
external procedure.


File: g77,  Node: JIBClr Intrinsic,  Next: JIBits Intrinsic,  Prev: JIAnd Intrinsic,  Up: Other Intrinsics

12.5.2.70 JIBClr Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIBClr' to use this name for an
external procedure.


File: g77,  Node: JIBits Intrinsic,  Next: JIBSet Intrinsic,  Prev: JIBClr Intrinsic,  Up: Other Intrinsics

12.5.2.71 JIBits Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIBits' to use this name for an
external procedure.


File: g77,  Node: JIBSet Intrinsic,  Next: JIDiM Intrinsic,  Prev: JIBits Intrinsic,  Up: Other Intrinsics

12.5.2.72 JIBSet Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIBSet' to use this name for an
external procedure.


File: g77,  Node: JIDiM Intrinsic,  Next: JIDInt Intrinsic,  Prev: JIBSet Intrinsic,  Up: Other Intrinsics

12.5.2.73 JIDiM Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIDiM' to use this name for an
external procedure.


File: g77,  Node: JIDInt Intrinsic,  Next: JIDNnt Intrinsic,  Prev: JIDiM Intrinsic,  Up: Other Intrinsics

12.5.2.74 JIDInt Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIDInt' to use this name for an
external procedure.


File: g77,  Node: JIDNnt Intrinsic,  Next: JIEOr Intrinsic,  Prev: JIDInt Intrinsic,  Up: Other Intrinsics

12.5.2.75 JIDNnt Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIDNnt' to use this name for an
external procedure.


File: g77,  Node: JIEOr Intrinsic,  Next: JIFix Intrinsic,  Prev: JIDNnt Intrinsic,  Up: Other Intrinsics

12.5.2.76 JIEOr Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIEOr' to use this name for an
external procedure.


File: g77,  Node: JIFix Intrinsic,  Next: JInt Intrinsic,  Prev: JIEOr Intrinsic,  Up: Other Intrinsics

12.5.2.77 JIFix Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIFix' to use this name for an
external procedure.


File: g77,  Node: JInt Intrinsic,  Next: JIOr Intrinsic,  Prev: JIFix Intrinsic,  Up: Other Intrinsics

12.5.2.78 JInt Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JInt' to use this name for an
external procedure.


File: g77,  Node: JIOr Intrinsic,  Next: JIQint Intrinsic,  Prev: JInt Intrinsic,  Up: Other Intrinsics

12.5.2.79 JIOr Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIOr' to use this name for an
external procedure.


File: g77,  Node: JIQint Intrinsic,  Next: JIQNnt Intrinsic,  Prev: JIOr Intrinsic,  Up: Other Intrinsics

12.5.2.80 JIQint Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIQint' to use this name for an
external procedure.


File: g77,  Node: JIQNnt Intrinsic,  Next: JIShft Intrinsic,  Prev: JIQint Intrinsic,  Up: Other Intrinsics

12.5.2.81 JIQNnt Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIQNnt' to use this name for an
external procedure.


File: g77,  Node: JIShft Intrinsic,  Next: JIShftC Intrinsic,  Prev: JIQNnt Intrinsic,  Up: Other Intrinsics

12.5.2.82 JIShft Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIShft' to use this name for an
external procedure.


File: g77,  Node: JIShftC Intrinsic,  Next: JISign Intrinsic,  Prev: JIShft Intrinsic,  Up: Other Intrinsics

12.5.2.83 JIShftC Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JIShftC' to use this name for
an external procedure.


File: g77,  Node: JISign Intrinsic,  Next: JMax0 Intrinsic,  Prev: JIShftC Intrinsic,  Up: Other Intrinsics

12.5.2.84 JISign Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JISign' to use this name for an
external procedure.


File: g77,  Node: JMax0 Intrinsic,  Next: JMax1 Intrinsic,  Prev: JISign Intrinsic,  Up: Other Intrinsics

12.5.2.85 JMax0 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMax0' to use this name for an
external procedure.


File: g77,  Node: JMax1 Intrinsic,  Next: JMin0 Intrinsic,  Prev: JMax0 Intrinsic,  Up: Other Intrinsics

12.5.2.86 JMax1 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMax1' to use this name for an
external procedure.


File: g77,  Node: JMin0 Intrinsic,  Next: JMin1 Intrinsic,  Prev: JMax1 Intrinsic,  Up: Other Intrinsics

12.5.2.87 JMin0 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMin0' to use this name for an
external procedure.


File: g77,  Node: JMin1 Intrinsic,  Next: JMod Intrinsic,  Prev: JMin0 Intrinsic,  Up: Other Intrinsics

12.5.2.88 JMin1 Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMin1' to use this name for an
external procedure.


File: g77,  Node: JMod Intrinsic,  Next: JNInt Intrinsic,  Prev: JMin1 Intrinsic,  Up: Other Intrinsics

12.5.2.89 JMod Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JMod' to use this name for an
external procedure.


File: g77,  Node: JNInt Intrinsic,  Next: JNot Intrinsic,  Prev: JMod Intrinsic,  Up: Other Intrinsics

12.5.2.90 JNInt Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JNInt' to use this name for an
external procedure.


File: g77,  Node: JNot Intrinsic,  Next: JZExt Intrinsic,  Prev: JNInt Intrinsic,  Up: Other Intrinsics

12.5.2.91 JNot Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JNot' to use this name for an
external procedure.


File: g77,  Node: JZExt Intrinsic,  Next: Kill Intrinsic (function),  Prev: JNot Intrinsic,  Up: Other Intrinsics

12.5.2.92 JZExt Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL JZExt' to use this name for an
external procedure.


File: g77,  Node: Kill Intrinsic (function),  Next: Link Intrinsic (function),  Prev: JZExt Intrinsic,  Up: Other Intrinsics

12.5.2.93 Kill Intrinsic (function)
...................................

     Kill(PID, SIGNAL)

Kill: `INTEGER(KIND=1)' function.

PID: `INTEGER'; scalar; INTENT(IN).

SIGNAL: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Sends the signal specified by SIGNAL to the process PID.  Returns 0
on success or a non-zero error code.  See `kill(2)'.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note Kill
Intrinsic (subroutine)::.


File: g77,  Node: Link Intrinsic (function),  Next: QAbs Intrinsic,  Prev: Kill Intrinsic (function),  Up: Other Intrinsics

12.5.2.94 Link Intrinsic (function)
...................................

     Link(PATH1, PATH2)

Link: `INTEGER(KIND=1)' function.

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Makes a (hard) link from file PATH1 to PATH2.  A null character
(`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise,
trailing blanks in PATH1 and PATH2 are ignored.  Returns 0 on success
or a non-zero error code.  See `link(2)'.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note Link
Intrinsic (subroutine)::.


File: g77,  Node: QAbs Intrinsic,  Next: QACos Intrinsic,  Prev: Link Intrinsic (function),  Up: Other Intrinsics

12.5.2.95 QAbs Intrinsic
........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QAbs' to use this name for an
external procedure.


File: g77,  Node: QACos Intrinsic,  Next: QACosD Intrinsic,  Prev: QAbs Intrinsic,  Up: Other Intrinsics

12.5.2.96 QACos Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QACos' to use this name for an
external procedure.


File: g77,  Node: QACosD Intrinsic,  Next: QASin Intrinsic,  Prev: QACos Intrinsic,  Up: Other Intrinsics

12.5.2.97 QACosD Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QACosD' to use this name for an
external procedure.


File: g77,  Node: QASin Intrinsic,  Next: QASinD Intrinsic,  Prev: QACosD Intrinsic,  Up: Other Intrinsics

12.5.2.98 QASin Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QASin' to use this name for an
external procedure.


File: g77,  Node: QASinD Intrinsic,  Next: QATan Intrinsic,  Prev: QASin Intrinsic,  Up: Other Intrinsics

12.5.2.99 QASinD Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QASinD' to use this name for an
external procedure.


File: g77,  Node: QATan Intrinsic,  Next: QATan2 Intrinsic,  Prev: QASinD Intrinsic,  Up: Other Intrinsics

12.5.2.100 QATan Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QATan' to use this name for an
external procedure.


File: g77,  Node: QATan2 Intrinsic,  Next: QATan2D Intrinsic,  Prev: QATan Intrinsic,  Up: Other Intrinsics

12.5.2.101 QATan2 Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QATan2' to use this name for an
external procedure.


File: g77,  Node: QATan2D Intrinsic,  Next: QATanD Intrinsic,  Prev: QATan2 Intrinsic,  Up: Other Intrinsics

12.5.2.102 QATan2D Intrinsic
............................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QATan2D' to use this name for
an external procedure.


File: g77,  Node: QATanD Intrinsic,  Next: QCos Intrinsic,  Prev: QATan2D Intrinsic,  Up: Other Intrinsics

12.5.2.103 QATanD Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QATanD' to use this name for an
external procedure.


File: g77,  Node: QCos Intrinsic,  Next: QCosD Intrinsic,  Prev: QATanD Intrinsic,  Up: Other Intrinsics

12.5.2.104 QCos Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QCos' to use this name for an
external procedure.


File: g77,  Node: QCosD Intrinsic,  Next: QCosH Intrinsic,  Prev: QCos Intrinsic,  Up: Other Intrinsics

12.5.2.105 QCosD Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QCosD' to use this name for an
external procedure.


File: g77,  Node: QCosH Intrinsic,  Next: QDiM Intrinsic,  Prev: QCosD Intrinsic,  Up: Other Intrinsics

12.5.2.106 QCosH Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QCosH' to use this name for an
external procedure.


File: g77,  Node: QDiM Intrinsic,  Next: QExp Intrinsic,  Prev: QCosH Intrinsic,  Up: Other Intrinsics

12.5.2.107 QDiM Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QDiM' to use this name for an
external procedure.


File: g77,  Node: QExp Intrinsic,  Next: QExt Intrinsic,  Prev: QDiM Intrinsic,  Up: Other Intrinsics

12.5.2.108 QExp Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QExp' to use this name for an
external procedure.


File: g77,  Node: QExt Intrinsic,  Next: QExtD Intrinsic,  Prev: QExp Intrinsic,  Up: Other Intrinsics

12.5.2.109 QExt Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QExt' to use this name for an
external procedure.


File: g77,  Node: QExtD Intrinsic,  Next: QFloat Intrinsic,  Prev: QExt Intrinsic,  Up: Other Intrinsics

12.5.2.110 QExtD Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QExtD' to use this name for an
external procedure.


File: g77,  Node: QFloat Intrinsic,  Next: QInt Intrinsic,  Prev: QExtD Intrinsic,  Up: Other Intrinsics

12.5.2.111 QFloat Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QFloat' to use this name for an
external procedure.


File: g77,  Node: QInt Intrinsic,  Next: QLog Intrinsic,  Prev: QFloat Intrinsic,  Up: Other Intrinsics

12.5.2.112 QInt Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QInt' to use this name for an
external procedure.


File: g77,  Node: QLog Intrinsic,  Next: QLog10 Intrinsic,  Prev: QInt Intrinsic,  Up: Other Intrinsics

12.5.2.113 QLog Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QLog' to use this name for an
external procedure.


File: g77,  Node: QLog10 Intrinsic,  Next: QMax1 Intrinsic,  Prev: QLog Intrinsic,  Up: Other Intrinsics

12.5.2.114 QLog10 Intrinsic
...........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QLog10' to use this name for an
external procedure.


File: g77,  Node: QMax1 Intrinsic,  Next: QMin1 Intrinsic,  Prev: QLog10 Intrinsic,  Up: Other Intrinsics

12.5.2.115 QMax1 Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QMax1' to use this name for an
external procedure.


File: g77,  Node: QMin1 Intrinsic,  Next: QMod Intrinsic,  Prev: QMax1 Intrinsic,  Up: Other Intrinsics

12.5.2.116 QMin1 Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QMin1' to use this name for an
external procedure.


File: g77,  Node: QMod Intrinsic,  Next: QNInt Intrinsic,  Prev: QMin1 Intrinsic,  Up: Other Intrinsics

12.5.2.117 QMod Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QMod' to use this name for an
external procedure.


File: g77,  Node: QNInt Intrinsic,  Next: QSin Intrinsic,  Prev: QMod Intrinsic,  Up: Other Intrinsics

12.5.2.118 QNInt Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QNInt' to use this name for an
external procedure.


File: g77,  Node: QSin Intrinsic,  Next: QSinD Intrinsic,  Prev: QNInt Intrinsic,  Up: Other Intrinsics

12.5.2.119 QSin Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QSin' to use this name for an
external procedure.


File: g77,  Node: QSinD Intrinsic,  Next: QSinH Intrinsic,  Prev: QSin Intrinsic,  Up: Other Intrinsics

12.5.2.120 QSinD Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QSinD' to use this name for an
external procedure.


File: g77,  Node: QSinH Intrinsic,  Next: QSqRt Intrinsic,  Prev: QSinD Intrinsic,  Up: Other Intrinsics

12.5.2.121 QSinH Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QSinH' to use this name for an
external procedure.


File: g77,  Node: QSqRt Intrinsic,  Next: QTan Intrinsic,  Prev: QSinH Intrinsic,  Up: Other Intrinsics

12.5.2.122 QSqRt Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QSqRt' to use this name for an
external procedure.


File: g77,  Node: QTan Intrinsic,  Next: QTanD Intrinsic,  Prev: QSqRt Intrinsic,  Up: Other Intrinsics

12.5.2.123 QTan Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QTan' to use this name for an
external procedure.


File: g77,  Node: QTanD Intrinsic,  Next: QTanH Intrinsic,  Prev: QTan Intrinsic,  Up: Other Intrinsics

12.5.2.124 QTanD Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QTanD' to use this name for an
external procedure.


File: g77,  Node: QTanH Intrinsic,  Next: Rename Intrinsic (function),  Prev: QTanD Intrinsic,  Up: Other Intrinsics

12.5.2.125 QTanH Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL QTanH' to use this name for an
external procedure.


File: g77,  Node: Rename Intrinsic (function),  Next: Secnds Intrinsic,  Prev: QTanH Intrinsic,  Up: Other Intrinsics

12.5.2.126 Rename Intrinsic (function)
......................................

     Rename(PATH1, PATH2)

Rename: `INTEGER(KIND=1)' function.

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Renames the file PATH1 to PATH2.  A null character (`CHAR(0)') marks
the end of the names in PATH1 and PATH2--otherwise, trailing blanks in
PATH1 and PATH2 are ignored.  See `rename(2)'.  Returns 0 on success or
a non-zero error code.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note Rename
Intrinsic (subroutine)::.


File: g77,  Node: Secnds Intrinsic,  Next: Signal Intrinsic (function),  Prev: Rename Intrinsic (function),  Up: Other Intrinsics

12.5.2.127 Secnds Intrinsic
...........................

     Secnds(T)

Secnds: `REAL(KIND=1)' function.

T: `REAL(KIND=1)'; scalar; INTENT(IN).

Intrinsic groups: `vxt'.

Description:

   Returns the local time in seconds since midnight minus the value T.

   This values returned by this intrinsic become numerically less than
previous values (they wrap around) during a single run of the compiler
program, under normal circumstances (such as running through the
midnight hour).


File: g77,  Node: Signal Intrinsic (function),  Next: SinD Intrinsic,  Prev: Secnds Intrinsic,  Up: Other Intrinsics

12.5.2.128 Signal Intrinsic (function)
......................................

     Signal(NUMBER, HANDLER)

Signal: `INTEGER(KIND=7)' function.

NUMBER: `INTEGER'; scalar; INTENT(IN).

HANDLER: Signal handler (`INTEGER FUNCTION' or `SUBROUTINE') or
dummy/global `INTEGER(KIND=1)' scalar.

Intrinsic groups: `badu77'.

Description:

   If HANDLER is a an `EXTERNAL' routine, arranges for it to be invoked
with a single integer argument (of system-dependent length) when signal
NUMBER occurs.  If HANDLER is an integer, it can be used to turn off
handling of signal NUMBER or revert to its default action.  See
`signal(2)'.

   Note that HANDLER will be called using C conventions, so the value
of its argument in Fortran terms is obtained by applying `%LOC()' (or
LOC()) to it.

   The value returned by `signal(2)' is returned.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   _Warning:_ If the returned value is stored in an `INTEGER(KIND=1)'
(default `INTEGER') argument, truncation of the original return value
occurs on some systems (such as Alphas, which have 64-bit pointers but
32-bit default integers), with no warning issued by `g77' under normal
circumstances.

   Therefore, the following code fragment might silently fail on some
systems:

     INTEGER RTN
     EXTERNAL MYHNDL
     RTN = SIGNAL(SIGNUM, MYHNDL)
     ...
     ! Restore original handler:
     RTN = SIGNAL(SIGNUM, RTN)

   The reason for the failure is that `RTN' might not hold all the
information on the original handler for the signal, thus restoring an
invalid handler.  This bug could manifest itself as a spurious run-time
failure at an arbitrary point later during the program's execution, for
example.

   _Warning:_ Use of the `libf2c' run-time library function `signal_'
directly (such as via `EXTERNAL SIGNAL') requires use of the `%VAL()'
construct to pass an `INTEGER' value (such as `SIG_IGN' or `SIG_DFL')
for the HANDLER argument.

   However, while `RTN = SIGNAL(SIGNUM, %VAL(SIG_IGN))' works when
`SIGNAL' is treated as an external procedure (and resolves, at link
time, to `libf2c''s `signal_' routine), this construct is not valid
when `SIGNAL' is recognized as the intrinsic of that name.

   Therefore, for maximum portability and reliability, code such
references to the `SIGNAL' facility as follows:

     INTRINSIC SIGNAL
     ...
     RTN = SIGNAL(SIGNUM, SIG_IGN)

   `g77' will compile such a call correctly, while other compilers will
generally either do so as well or reject the `INTRINSIC SIGNAL'
statement via a diagnostic, allowing you to take appropriate action.

   For information on other intrinsics with the same name: *Note Signal
Intrinsic (subroutine)::.


File: g77,  Node: SinD Intrinsic,  Next: SnglQ Intrinsic,  Prev: Signal Intrinsic (function),  Up: Other Intrinsics

12.5.2.129 SinD Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL SinD' to use this name for an
external procedure.


File: g77,  Node: SnglQ Intrinsic,  Next: SymLnk Intrinsic (function),  Prev: SinD Intrinsic,  Up: Other Intrinsics

12.5.2.130 SnglQ Intrinsic
..........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL SnglQ' to use this name for an
external procedure.


File: g77,  Node: SymLnk Intrinsic (function),  Next: System Intrinsic (function),  Prev: SnglQ Intrinsic,  Up: Other Intrinsics

12.5.2.131 SymLnk Intrinsic (function)
......................................

     SymLnk(PATH1, PATH2)

SymLnk: `INTEGER(KIND=1)' function.

PATH1: `CHARACTER'; scalar; INTENT(IN).

PATH2: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Makes a symbolic link from file PATH1 to PATH2.  A null character
(`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise,
trailing blanks in PATH1 and PATH2 are ignored.  Returns 0 on success
or a non-zero error code (`ENOSYS' if the system does not provide
`symlink(2)').

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note SymLnk
Intrinsic (subroutine)::.


File: g77,  Node: System Intrinsic (function),  Next: TanD Intrinsic,  Prev: SymLnk Intrinsic (function),  Up: Other Intrinsics

12.5.2.132 System Intrinsic (function)
......................................

     System(COMMAND)

System: `INTEGER(KIND=1)' function.

COMMAND: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Passes the command COMMAND to a shell (see `system(3)').  Returns
the value returned by `system(3)', presumably 0 if the shell command
succeeded.  Note that which shell is used to invoke the command is
system-dependent and environment-dependent.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.  However, the function form can be valid in
cases where the actual side effects performed by the call are
unimportant to the application.

   For example, on a UNIX system, `SAME = SYSTEM('cmp a b')' does not
perform any side effects likely to be important to the program, so the
programmer would not care if the actual system call (and invocation of
`cmp') was optimized away in a situation where the return value could
be determined otherwise, or was not actually needed (`SAME' not
actually referenced after the sample assignment statement).

   For information on other intrinsics with the same name: *Note System
Intrinsic (subroutine)::.


File: g77,  Node: TanD Intrinsic,  Next: Time Intrinsic (VXT),  Prev: System Intrinsic (function),  Up: Other Intrinsics

12.5.2.133 TanD Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL TanD' to use this name for an
external procedure.


File: g77,  Node: Time Intrinsic (VXT),  Next: UMask Intrinsic (function),  Prev: TanD Intrinsic,  Up: Other Intrinsics

12.5.2.134 Time Intrinsic (VXT)
...............................

     CALL Time(TIME)

TIME: `CHARACTER*8'; scalar; INTENT(OUT).

Intrinsic groups: `vxt'.

Description:

   Returns in TIME a character representation of the current time as
obtained from `ctime(3)'.

   Programs making use of this intrinsic might not be Year 10000 (Y10K)
compliant.  For example, the date might appear, to such programs, to
wrap around (change from a larger value to a smaller one) as of the
Year 10000.

   *Note FDate Intrinsic (subroutine)::, for an equivalent routine.

   For information on other intrinsics with the same name: *Note Time
Intrinsic (UNIX)::.


File: g77,  Node: UMask Intrinsic (function),  Next: Unlink Intrinsic (function),  Prev: Time Intrinsic (VXT),  Up: Other Intrinsics

12.5.2.135 UMask Intrinsic (function)
.....................................

     UMask(MASK)

UMask: `INTEGER(KIND=1)' function.

MASK: `INTEGER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Sets the file creation mask to MASK and returns the old value.  See
`umask(2)'.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note UMask
Intrinsic (subroutine)::.


File: g77,  Node: Unlink Intrinsic (function),  Next: ZExt Intrinsic,  Prev: UMask Intrinsic (function),  Up: Other Intrinsics

12.5.2.136 Unlink Intrinsic (function)
......................................

     Unlink(FILE)

Unlink: `INTEGER(KIND=1)' function.

FILE: `CHARACTER'; scalar; INTENT(IN).

Intrinsic groups: `badu77'.

Description:

   Unlink the file FILE.  A null character (`CHAR(0)') marks the end of
the name in FILE--otherwise, trailing blanks in FILE are ignored.
Returns 0 on success or a non-zero error code.  See `unlink(2)'.

   Due to the side effects performed by this intrinsic, the function
form is not recommended.

   For information on other intrinsics with the same name: *Note Unlink
Intrinsic (subroutine)::.


File: g77,  Node: ZExt Intrinsic,  Prev: Unlink Intrinsic (function),  Up: Other Intrinsics

12.5.2.137 ZExt Intrinsic
.........................

   This intrinsic is not yet implemented.  The name is, however,
reserved as an intrinsic.  Use `EXTERNAL ZExt' to use this name for an
external procedure.


File: g77,  Node: Other Compilers,  Next: Other Languages,  Prev: Other Dialects,  Up: Top

13 Other Compilers
******************

   An individual Fortran source file can be compiled to an object
(`*.o') file instead of to the final program executable.  This allows
several portions of a program to be compiled at different times and
linked together whenever a new version of the program is needed.
However, it introduces the issue of "object compatibility" across the
various object files (and libraries, or `*.a' files) that are linked
together to produce any particular executable file.

   Object compatibility is an issue when combining, in one program,
Fortran code compiled by more than one compiler (or more than one
configuration of a compiler).  If the compilers disagree on how to
transform the names of procedures, there will normally be errors when
linking such programs.  Worse, if the compilers agree on naming, but
disagree on issues like how to pass parameters, return arguments, and
lay out `COMMON' areas, the earliest detected errors might be the
incorrect results produced by the program (and that assumes these
errors are detected, which is not always the case).

   Normally, `g77' generates code that is object-compatible with code
generated by a version of `f2c' configured (with, for example, `f2c.h'
definitions) to be generally compatible with `g77' as built by `gcc'.
(Normally, `f2c' will, by default, conform to the appropriate
configuration, but it is possible that older or perhaps even newer
versions of `f2c', or versions having certain configuration changes to
`f2c' internals, will produce object files that are incompatible with
`g77'.)

   For example, a Fortran string subroutine argument will become two
arguments on the C side: a `char *' and an `int' length.

   Much of this compatibility results from the fact that `g77' uses the
same run-time library, `libf2c', used by `f2c', though `g77' gives its
version the name `libg2c' so as to avoid conflicts when linking,
installing them in the same directories, and so on.

   Other compilers might or might not generate code that is
object-compatible with `libg2c' and current `g77', and some might offer
such compatibility only when explicitly selected via a command-line
option to the compiler.

   _Note: This portion of the documentation definitely needs a lot of
work!_

* Menu:

* Dropping f2c Compatibility::  When speed is more important.
* Compilers Other Than f2c::    Interoperation with code from other compilers.


File: g77,  Node: Dropping f2c Compatibility,  Next: Compilers Other Than f2c,  Up: Other Compilers

13.1 Dropping `f2c' Compatibility
=================================

   Specifying `-fno-f2c' allows `g77' to generate, in some cases,
faster code, by not needing to allow to the possibility of linking with
code compiled by `f2c'.

   For example, this affects how `REAL(KIND=1)', `COMPLEX(KIND=1)', and
`COMPLEX(KIND=2)' functions are called.  With `-fno-f2c', they are
compiled as returning the appropriate `gcc' type (`float', `__complex__
float', `__complex__ double', in many configurations).

   With `-ff2c' in force, they are compiled differently (with perhaps
slower run-time performance) to accommodate the restrictions inherent
in `f2c''s use of K&R C as an intermediate language--`REAL(KIND=1)'
functions return C's `double' type, while `COMPLEX' functions return
`void' and use an extra argument pointing to a place for the functions
to return their values.

   It is possible that, in some cases, leaving `-ff2c' in force might
produce faster code than using `-fno-f2c'.  Feel free to experiment,
but remember to experiment with changing the way _entire programs and
their Fortran libraries are compiled_ at a time, since this sort of
experimentation affects the interface of code generated for a Fortran
source file--that is, it affects object compatibility.

   Note that `f2c' compatibility is a fairly static target to achieve,
though not necessarily perfectly so, since, like `g77', it is still
being improved.  However, specifying `-fno-f2c' causes `g77' to
generate code that will probably be incompatible with code generated by
future versions of `g77' when the same option is in force.  You should
make sure you are always able to recompile complete programs from
source code when upgrading to new versions of `g77' or `f2c',
especially when using options such as `-fno-f2c'.

   Therefore, if you are using `g77' to compile libraries and other
object files for possible future use and you don't want to require
recompilation for future use with subsequent versions of `g77', you
might want to stick with `f2c' compatibility for now, and carefully
watch for any announcements about changes to the `f2c'/`libf2c'
interface that might affect existing programs (thus requiring
recompilation).

   It is probable that a future version of `g77' will not, by default,
generate object files compatible with `f2c', and that version probably
would no longer use `libf2c'.  If you expect to depend on this
compatibility in the long term, use the options `-ff2c -ff2c-library'
when compiling all of the applicable code.  This should cause future
versions of `g77' either to produce compatible code (at the expense of
the availability of some features and performance), or at the very
least, to produce diagnostics.

   (The library `g77' produces will no longer be named `libg2c' when it
is no longer generally compatible with `libf2c'.  It will likely be
referred to, and, if installed as a distinct library, named `libg77',
or some other as-yet-unused name.)


File: g77,  Node: Compilers Other Than f2c,  Prev: Dropping f2c Compatibility,  Up: Other Compilers

13.2 Compilers Other Than `f2c'
===============================

   On systems with Fortran compilers other than `f2c' and `g77', code
compiled by `g77' is not expected to work well with code compiled by
the native compiler.  (This is true for `f2c'-compiled objects as well.)
Libraries compiled with the native compiler probably will have to be
recompiled with `g77' to be used with `g77'-compiled code.

   Reasons for such incompatibilities include:

   * There might be differences in the way names of Fortran procedures
     are translated for use in the system's object-file format.  For
     example, the statement `CALL FOO' might be compiled by `g77' to
     call a procedure the linker `ld' sees given the name `_foo_',
     while the apparently corresponding statement `SUBROUTINE FOO'
     might be compiled by the native compiler to define the
     linker-visible name `_foo', or `_FOO_', and so on.

   * There might be subtle type mismatches which cause subroutine
     arguments and function return values to get corrupted.

     This is why simply getting `g77' to transform procedure names the
     same way a native compiler does is not usually a good idea--unless
     some effort has been made to ensure that, aside from the way the
     two compilers transform procedure names, everything else about the
     way they generate code for procedure interfaces is identical.

   * Native compilers use libraries of private I/O routines which will
     not be available at link time unless you have the native
     compiler--and you would have to explicitly ask for them.

     For example, on the Sun you would have to add `-L/usr/lang/SCx.x
     -lF77 -lV77' to the link command.


File: g77,  Node: Other Languages,  Next: Installation,  Prev: Other Compilers,  Up: Top

14 Other Languages
******************

   _Note: This portion of the documentation definitely needs a lot of
work!_

* Menu:

* Interoperating with C and C++::


File: g77,  Node: Interoperating with C and C++,  Up: Other Languages

14.1 Tools and advice for interoperating with C and C++
=======================================================

   The following discussion assumes that you are running `g77' in `f2c'
compatibility mode, i.e. not using `-fno-f2c'.  It provides some advice
about quick and simple techniques for linking Fortran and C (or C++),
the most common requirement.  For the full story consult the
description of code generation.  *Note Debugging and Interfacing::.

   When linking Fortran and C, it's usually best to use `g77' to do the
linking so that the correct libraries are included (including the maths
one).  If you're linking with C++ you will want to add `-lstdc++',
`-lg++' or whatever.  If you need to use another driver program (or
`ld' directly), you can find out what linkage options `g77' passes by
running `g77 -v'.

* Menu:

* C Interfacing Tools::
* C Access to Type Information::
* f2c Skeletons and Prototypes::
* C++ Considerations::
* Startup Code::


File: g77,  Node: C Interfacing Tools,  Next: C Access to Type Information,  Up: Interoperating with C and C++

14.1.1 C Interfacing Tools
--------------------------

   Even if you don't actually use it as a compiler, `f2c' from
`ftp://ftp.netlib.org/f2c/src', can be a useful tool when you're
interfacing (linking) Fortran and C.  *Note Generating Skeletons and
Prototypes with `f2c': f2c Skeletons and Prototypes.

   To use `f2c' for this purpose you only need retrieve and build the
`src' directory from the distribution, consult the `README'
instructions there for machine-specifics, and install the `f2c' program
on your path.

   Something else that might be useful is `cfortran.h' from
`ftp://zebra/desy.de/cfortran'.  This is a fairly general tool which
can be used to generate interfaces for calling in both directions
between Fortran and C.  It can be used in `f2c' mode with
`g77'--consult its documentation for details.


File: g77,  Node: C Access to Type Information,  Next: f2c Skeletons and Prototypes,  Prev: C Interfacing Tools,  Up: Interoperating with C and C++

14.1.2 Accessing Type Information in C
--------------------------------------

   Generally, C code written to link with `g77' code--calling and/or
being called from Fortran--should `#include <g2c.h>' to define the C
versions of the Fortran types.  Don't assume Fortran `INTEGER' types
correspond to C `int's, for instance; instead, declare them as
`integer', a type defined by `g2c.h'.  `g2c.h' is installed where `gcc'
will find it by default, assuming you use a copy of `gcc' compatible
with `g77', probably built at the same time as `g77'.


File: g77,  Node: f2c Skeletons and Prototypes,  Next: C++ Considerations,  Prev: C Access to Type Information,  Up: Interoperating with C and C++

14.1.3 Generating Skeletons and Prototypes with `f2c'
-----------------------------------------------------

   A simple and foolproof way to write `g77'-callable C routines--e.g.
to interface with an existing library--is to write a file (named, for
example, `fred.f') of dummy Fortran skeletons comprising just the
declaration of the routine(s) and dummy arguments plus `END' statements.
Then run `f2c' on file `fred.f' to produce `fred.c' into which you can
edit useful code, confident the calling sequence is correct, at least.
(There are some errors otherwise commonly made in generating C
interfaces with `f2c' conventions, such as not using `doublereal' as
the return type of a `REAL' `FUNCTION'.)

   `f2c' also can help with calling Fortran from C, using its `-P'
option to generate C prototypes appropriate for calling the Fortran.(1)
If the Fortran code containing any routines to be called from C is in
file `joe.f', use the command `f2c -P joe.f' to generate the file
`joe.P' containing prototype information.  `#include' this in the C
which has to call the Fortran routines to make sure you get it right.

   *Note Arrays (DIMENSION): Arrays, for information on the differences
between the way Fortran (including compilers like `g77') and C handle
arrays.

   ---------- Footnotes ----------

   (1) The files generated like this can also be used for inter-unit
consistency checking of dummy and actual arguments, although the
`ftnchek' tool from `ftp://ftp.netlib.org/fortran' or
`ftp://ftp.dsm.fordham.edu' is probably better for this purpose.


File: g77,  Node: C++ Considerations,  Next: Startup Code,  Prev: f2c Skeletons and Prototypes,  Up: Interoperating with C and C++

14.1.4 C++ Considerations
-------------------------

   `f2c' can be used to generate suitable code for compilation with a
C++ system using the `-C++' option.  The important thing about linking
`g77'-compiled code with C++ is that the prototypes for the `g77'
routines must specify C linkage to avoid name mangling.  So, use an
`extern "C"' declaration.  `f2c''s `-C++' option will take care of this
when generating skeletons or prototype files as above, and also avoid
clashes with C++ reserved words in addition to those in C.


File: g77,  Node: Startup Code,  Prev: C++ Considerations,  Up: Interoperating with C and C++

14.1.5 Startup Code
-------------------

   Unlike with some runtime systems, it shouldn't be necessary (unless
there are bugs) to use a Fortran main program unit to ensure the
runtime--specifically the I/O system--is initialized.

   However, to use the `g77' intrinsics `GETARG' and `IARGC', either
the `main' routine from the `libg2c' library must be used, or the
`f_setarg' routine (new as of `egcs' version 1.1 and `g77' version
0.5.23) must be called with the appropriate `argc' and `argv' arguments
prior to the program calling `GETARG' or `IARGC'.

   To provide more flexibility for mixed-language programming involving
`g77' while allowing for shared libraries, as of `egcs' version 1.1 and
`g77' version 0.5.23, `g77''s `main' routine in `libg2c' does the
following, in order:

  1. Calls `f_setarg' with the incoming `argc' and `argv' arguments, in
     the same order as for `main' itself.

     This sets up the command-line environment for `GETARG' and `IARGC'.

  2. Calls `f_setsig' (with no arguments).

     This sets up the signaling and exception environment.

  3. Calls `f_init' (with no arguments).

     This initializes the I/O environment, though that should not be
     necessary, as all I/O functions in `libf2c' are believed to call
     `f_init' automatically, if necessary.

     (A future version of `g77' might skip this explicit step, to speed
     up normal exit of a program.)

  4. Arranges for `f_exit' to be called (with no arguments) when the
     program exits.

     This ensures that the I/O environment is properly shut down before
     the program exits normally.  Otherwise, output buffers might not
     be fully flushed, scratch files might not be deleted, and so on.

     The simple way `main' does this is to call `f_exit' itself after
     calling `MAIN__' (in the next step).

     However, this does not catch the cases where the program might
     call `exit' directly, instead of using the `EXIT' intrinsic
     (implemented as `exit_' in `libf2c').

     So, `main' attempts to use the operating environment's `onexit' or
     `atexit' facility, if available, to cause `f_exit' to be called
     automatically upon any invocation of `exit'.

  5. Calls `MAIN__' (with no arguments).

     This starts executing the Fortran main program unit for the
     application.  (Both `g77' and `f2c' currently compile a main
     program unit so that its global name is `MAIN__'.)

  6. If no `onexit' or `atexit' is provided by the system, calls
     `f_exit'.

  7. Calls `exit' with a zero argument, to signal a successful program
     termination.

  8. Returns a zero value to the caller, to signal a successful program
     termination, in case `exit' doesn't exit on the system.

   All of the above names are C `extern' names, i.e. not mangled.

   When using the `main' procedure provided by `g77' without a Fortran
main program unit, you need to provide `MAIN__' as the entry point for
your C code.  (Make sure you link the object file that defines that
entry point with the rest of your program.)

   To provide your own `main' procedure in place of `g77''s, make sure
you specify the object file defining that procedure _before_ `-lg2c' on
the `g77' command line.  Since the `-lg2c' option is implicitly
provided, this is usually straightforward.  (Use the `--verbose' option
to see how and where `g77' implicitly adds `-lg2c' in a command line
that will link the program.  Feel free to specify `-lg2c' explicitly,
as appropriate.)

   However, when providing your own `main', make sure you perform the
appropriate tasks in the appropriate order.  For example, if your
`main' does not call `f_setarg', make sure the rest of your application
does not call `GETARG' or `IARGC'.

   And, if your `main' fails to ensure that `f_exit' is called upon
program exit, some files might end up incompletely written, some
scratch files might be left lying around, and some existing files being
written might be left with old data not properly truncated at the end.

   Note that, generally, the `g77' operating environment does not
depend on a procedure named `MAIN__' actually being called prior to any
other `g77'-compiled code.  That is, `MAIN__' does not, itself, set up
any important operating-environment characteristics upon which other
code might depend.  This might change in future versions of `g77', with
appropriate notification in the release notes.

   For more information, consult the source code for the above routines.
These are in `egcs/libf2c/libF77/', named `main.c', `setarg.c',
`setsig.c', `getarg_.c', and `iargc_.c'.

   Also, the file `egcs/gcc/f/com.c' contains the code `g77' uses to
open-code (inline) references to `IARGC'.


File: g77,  Node: Installation,  Next: Debugging and Interfacing,  Prev: Other Languages,  Up: Top

15 Installing GNU Fortran
*************************

   The following information describes how to install `g77'.

   Note that, for users of the GCC-2.95 version of `g77', much of the
information is obsolete, and is superceded by the GCC installation
procedures.  Such information is accordingly omitted and flagged as
such.

   The following information was last updated on 1999-07-17:

* Menu:

* Prerequisites::          Make sure your system is ready for `g77'.
* Problems Installing::    Known trouble areas.
* Settings::               Changing `g77' internals before building.
* Quick Start::            The easier procedure for non-experts.
* Complete Installation::  For experts, or those who want to be: the details.
* Distributing Binaries::  If you plan on distributing your `g77'.


File: g77,  Node: Prerequisites,  Next: Problems Installing,  Up: Installation

15.1 Prerequisites
==================

   For users of the GCC-2.95 version of `g77', this information is
superceded by the GCC installation instructions.


File: g77,  Node: Problems Installing,  Next: Settings,  Prev: Prerequisites,  Up: Installation

15.2 Problems Installing
========================

   This is a list of problems (and some apparent problems which don't
really mean anything is wrong) that show up when configuring, building,
installing, or porting GNU Fortran.

   *Note Installation Problems: (gcc)Installation Problems, for more
information on installation problems that can afflict either `gcc' or
`g77'.

* Menu:

* General Problems::         Problems afflicting most or all systems.
* System-specific Problems:: Problems afflicting particular systems.
* Cross-compiler Problems::  Problems afflicting cross-compilation setups.


File: g77,  Node: General Problems,  Next: System-specific Problems,  Up: Problems Installing

15.2.1 General Problems
-----------------------

   These problems can occur on most or all systems.

* Menu:

* GNU C Required::             Why even ANSI C is not enough.
* Patching GNU CC::            Why `gcc' needn't be patched.
* Building GNU CC Necessary::  Why you can't build _just_ Fortran.
* Missing strtoul or bsearch:: When linking `f771' fails.
* Cleanup Kills Stage Directories::  For `g77' developers.
* LANGUAGES Macro Ignored::    Sometimes `LANGUAGES' is ignored.


File: g77,  Node: GNU C Required,  Next: Patching GNU CC,  Up: General Problems

15.2.1.1 GNU C Required
.......................

   Compiling `g77' requires GNU C, not just ANSI C.  Fixing this
wouldn't be very hard (just tedious), but the code using GNU extensions
to the C language is expected to be rewritten for 0.6 anyway, so there
are no plans for an interim fix.

   This requirement does not mean you must already have `gcc' installed
to build `g77'.  As long as you have a working C compiler, you can use a
"bootstrap" build to automate the process of first building `gcc' using
the working C compiler you have, then building `g77' and rebuilding
`gcc' using that just-built `gcc', and so on.


File: g77,  Node: Patching GNU CC,  Next: Building GNU CC Necessary,  Prev: GNU C Required,  Up: General Problems

15.2.1.2 Patching GNU CC
........................

   `g77' no longer requires application of a patch file to the `gcc'
compiler tree.  In fact, no such patch file is distributed with `g77'.
This is as of version 0.5.23 and `egcs' version 1.0.


File: g77,  Node: Building GNU CC Necessary,  Next: Missing strtoul or bsearch,  Prev: Patching GNU CC,  Up: General Problems

15.2.1.3 Building GNU CC Necessary
..................................

   It should be possible to build the runtime without building `cc1'
and other non-Fortran items, but, for now, an easy way to do that is
not yet established.


File: g77,  Node: Missing strtoul or bsearch,  Next: Cleanup Kills Stage Directories,  Prev: Building GNU CC Necessary,  Up: General Problems

15.2.1.4 Missing strtoul or bsearch
...................................

   This information does not apply to the GCC-2.95 version of `g77',


File: g77,  Node: Cleanup Kills Stage Directories,  Next: LANGUAGES Macro Ignored,  Prev: Missing strtoul or bsearch,  Up: General Problems

15.2.1.5 Cleanup Kills Stage Directories
........................................

   It'd be helpful if `g77''s `Makefile.in' or `Make-lang.in' would
create the various `stageN' directories and their subdirectories, so
developers and expert installers wouldn't have to reconfigure after
cleaning up.

   That help has arrived as of version 0.5.23 of `g77' and version 1.1
of `egcs'.  Configuration itself no longer creates any particular
directories that are unique to `g77'.  The build procedures in
`Make-lang.in' take care of that, on demand.


File: g77,  Node: LANGUAGES Macro Ignored,  Prev: Cleanup Kills Stage Directories,  Up: General Problems

15.2.1.6 LANGUAGES Macro Ignored
................................

   Prior to version 0.5.23 of `g77' and version 1.1 of `egcs', `g77'
would sometimes ignore the absence of `f77' and `F77' in the
`LANGUAGES' macro definition used for the `make' command being
processed.

   As of `g77' version 0.5.23 and `egcs' version 1.1, `g77' now obeys
this macro in all relevant situations.

   However, in versions of `gcc' through 2.8.1, non-`g77' portions of
`gcc', such as `g++', are known to go ahead and perform various
language-specific activities when their respective language strings do
not appear in the `LANGUAGES' macro in effect during that invocation of
`make'.

   It is expected that these remaining problems will be fixed in a
future version of `gcc'.


File: g77,  Node: System-specific Problems,  Next: Cross-compiler Problems,  Prev: General Problems,  Up: Problems Installing

15.2.2 System-specific Problems
-------------------------------

   A linker bug on some versions of AIX 4.1 might prevent building when
`g77' is built within `gcc'.  It might also occur when building within
`egcs'.  *Note LINKFAIL::.


File: g77,  Node: Cross-compiler Problems,  Prev: System-specific Problems,  Up: Problems Installing

15.2.3 Cross-compiler Problems
------------------------------

   `g77' has been in alpha testing since September of 1992, and in
public beta testing since February of 1995.  Alpha testing was done by
a small number of people worldwide on a fairly wide variety of
machines, involving self-compilation in most or all cases.  Beta
testing has been done primarily via self-compilation, but in more and
more cases, cross-compilation (and "criss-cross compilation", where a
version of a compiler is built on one machine to run on a second and
generate code that runs on a third) has been tried and has succeeded,
to varying extents.

   Generally, `g77' can be ported to any configuration to which `gcc',
`f2c', and `libf2c' can be ported and made to work together, aside from
the known problems described in this manual.  If you want to port `g77'
to a particular configuration, you should first make sure `gcc' and
`libf2c' can be ported to that configuration before focusing on `g77',
because `g77' is so dependent on them.

   Even for cases where `gcc' and `libf2c' work, you might run into
problems with cross-compilation on certain machines, for several
reasons.

   * There is one known bug (a design bug to be fixed in 0.6) that
     prevents configuration of `g77' as a cross-compiler in some cases,
     though there are assumptions made during configuration that
     probably make doing non-self-hosting builds a hassle, requiring
     manual intervention.

   * `gcc' might still have some trouble being configured for certain
     combinations of machines.  For example, it might not know how to
     handle floating-point constants.

   * Improvements to the way `libg2c' is built could make building
     `g77' as a cross-compiler easier--for example, passing and using
     `$(LD)' and `$(AR)' in the appropriate ways.  (This is improved in
     the `egcs' version of `g77', especially as of version 1.1.)

   * There are still some challenges putting together the right
     run-time libraries (needed by `libg2c') for a target system,
     depending on the systems involved in the configuration.  (This is
     a general problem with cross-compilation, and with `gcc' in
     particular.)


File: g77,  Node: Settings,  Next: Quick Start,  Prev: Problems Installing,  Up: Installation

15.3 Changing Settings Before Building
======================================

   Here are some internal `g77' settings that can be changed by editing
source files in `egcs/gcc/f/' before building.

   This information, and perhaps even these settings, represent
stop-gap solutions to problems people doing various ports of `g77' have
encountered.  As such, none of the following information is expected to
be pertinent in future versions of `g77'.

* Menu:

* Larger File Unit Numbers::     Raising `MXUNIT'.
* Always Flush Output::          Synchronizing write errors.
* Maximum Stackable Size::       Large arrays forced off the stack.
* Floating-point Bit Patterns::  Possible programs building `g77'
                                   as a cross-compiler.
* Large Initialization::         Large arrays with `DATA'
                                   initialization.
* Alpha Problems Fixed::         Problems with 64-bit systems like
                                   Alphas now fixed?


File: g77,  Node: Larger File Unit Numbers,  Next: Always Flush Output,  Up: Settings

15.3.1 Larger File Unit Numbers
-------------------------------

   As distributed, whether as part of `f2c' or `g77', `libf2c' accepts
file unit numbers only in the range 0 through 99.  For example, a
statement such as `WRITE (UNIT=100)' causes a run-time crash in
`libf2c', because the unit number, 100, is out of range.

   If you know that Fortran programs at your installation require the
use of unit numbers higher than 99, you can change the value of the
`MXUNIT' macro, which represents the maximum unit number, to an
appropriately higher value.

   To do this, edit the file `egcs/libf2c/libI77/fio.h' in your `g77'
source tree, changing the following line:

     #define MXUNIT 100

   Change the line so that the value of `MXUNIT' is defined to be at
least one _greater_ than the maximum unit number used by the Fortran
programs on your system.

   (For example, a program that does `WRITE (UNIT=255)' would require
`MXUNIT' set to at least 256 to avoid crashing.)

   Then build or rebuild `g77' as appropriate.

   _Note:_ Changing this macro has _no_ effect on other limits your
system might place on the number of files open at the same time.  That
is, the macro might allow a program to do `WRITE (UNIT=100)', but the
library and operating system underlying `libf2c' might disallow it if
many other files have already been opened (via `OPEN' or implicitly via
`READ', `WRITE', and so on).  Information on how to increase these
other limits should be found in your system's documentation.


File: g77,  Node: Always Flush Output,  Next: Maximum Stackable Size,  Prev: Larger File Unit Numbers,  Up: Settings

15.3.2 Always Flush Output
--------------------------

   Some Fortran programs require output (writes) to be flushed to the
operating system (under UNIX, via the `fflush()' library call) so that
errors, such as disk full, are immediately flagged via the relevant
`ERR=' and `IOSTAT=' mechanism, instead of such errors being flagged
later as subsequent writes occur, forcing the previously written data
to disk, or when the file is closed.

   Essentially, the difference can be viewed as synchronous error
reporting (immediate flagging of errors during writes) versus
asynchronous, or, more precisely, buffered error reporting (detection
of errors might be delayed).

   `libg2c' supports flagging write errors immediately when it is built
with the `ALWAYS_FLUSH' macro defined.  This results in a `libg2c' that
runs slower, sometimes quite a bit slower, under certain
circumstances--for example, accessing files via the networked file
system NFS--but the effect can be more reliable, robust file I/O.

   If you know that Fortran programs requiring this level of precision
of error reporting are to be compiled using the version of `g77' you
are building, you might wish to modify the `g77' source tree so that
the version of `libg2c' is built with the `ALWAYS_FLUSH' macro defined,
enabling this behavior.

   To do this, find this line in `egcs/libf2c/f2c.h' in your `g77'
source tree:

     /* #define ALWAYS_FLUSH */

   Remove the leading `/* ', so the line begins with `#define', and the
trailing ` */'.

   Then build or rebuild `g77' as appropriate.


File: g77,  Node: Maximum Stackable Size,  Next: Floating-point Bit Patterns,  Prev: Always Flush Output,  Up: Settings

15.3.3 Maximum Stackable Size
-----------------------------

   `g77', on most machines, puts many variables and arrays on the stack
where possible, and can be configured (by changing
`FFECOM_sizeMAXSTACKITEM' in `egcs/gcc/f/com.c') to force smaller-sized
entities into static storage (saving on stack space) or permit
larger-sized entities to be put on the stack (which can improve
run-time performance, as it presents more opportunities for the GBE to
optimize the generated code).

   _Note:_ Putting more variables and arrays on the stack might cause
problems due to system-dependent limits on stack size.  Also, the value
of `FFECOM_sizeMAXSTACKITEM' has no effect on automatic variables and
arrays.  *Note But-bugs::, for more information.


File: g77,  Node: Floating-point Bit Patterns,  Next: Large Initialization,  Prev: Maximum Stackable Size,  Up: Settings

15.3.4 Floating-point Bit Patterns
----------------------------------

   The `g77' build will crash if an attempt is made to build it as a
cross-compiler for a target when `g77' cannot reliably determine the
bit pattern of floating-point constants for the target.  Planned
improvements for version 0.6 of `g77' will give it the capabilities it
needs to not have to crash the build but rather generate correct code
for the target.  (Currently, `g77' would generate bad code under such
circumstances if it didn't crash during the build, e.g. when compiling
a source file that does something like `EQUIVALENCE (I,R)' and `DATA
R/9.43578/'.)


File: g77,  Node: Large Initialization,  Next: Alpha Problems Fixed,  Prev: Floating-point Bit Patterns,  Up: Settings

15.3.5 Initialization of Large Aggregate Areas
----------------------------------------------

   A warning message is issued when `g77' sees code that provides
initial values (e.g. via `DATA') to an aggregate area (`COMMON' or
`EQUIVALENCE', or even a large enough array or `CHARACTER' variable)
that is large enough to increase `g77''s compile time by roughly a
factor of 10.

   This size currently is quite small, since `g77' currently has a
known bug requiring too much memory and time to handle such cases.  In
`egcs/gcc/f/data.c', the macro `FFEDATA_sizeTOO_BIG_INIT_' is defined
to the minimum size for the warning to appear.  The size is specified
in storage units, which can be bytes, words, or whatever, on a
case-by-case basis.

   After changing this macro definition, you must (of course) rebuild
and reinstall `g77' for the change to take effect.

   Note that, as of version 0.5.18, improvements have reduced the scope
of the problem for _sparse_ initialization of large arrays, especially
those with large, contiguous uninitialized areas.  However, the warning
is issued at a point prior to when `g77' knows whether the
initialization is sparse, and delaying the warning could mean it is
produced too late to be helpful.

   Therefore, the macro definition should not be adjusted to reflect
sparse cases.  Instead, adjust it to generate the warning when densely
initialized arrays begin to cause responses noticeably slower than
linear performance would suggest.


File: g77,  Node: Alpha Problems Fixed,  Prev: Large Initialization,  Up: Settings

15.3.6 Alpha Problems Fixed
---------------------------

   `g77' used to warn when it was used to compile Fortran code for a
target configuration that is not basically a 32-bit machine (such as an
Alpha, which is a 64-bit machine, especially if it has a 64-bit
operating system running on it).  That was because `g77' was known to
not work properly on such configurations.

   As of version 0.5.20, `g77' is believed to work well enough on such
systems.  So, the warning is no longer needed or provided.

   However, support for 64-bit systems, especially in areas such as
cross-compilation and handling of intrinsics, is still incomplete.  The
symptoms are believed to be compile-time diagnostics rather than the
generation of bad code.  It is hoped that version 0.6 will completely
support 64-bit systems.


File: g77,  Node: Quick Start,  Next: Complete Installation,  Prev: Settings,  Up: Installation

15.4 Quick Start
================

   For users of the GCC-2.95 version of `g77', this information is
superceded by the GCC installation instructions.


File: g77,  Node: Complete Installation,  Next: Distributing Binaries,  Prev: Quick Start,  Up: Installation

15.5 Complete Installation
==========================

   For users of the GCC-2.95 version of `g77', this information is
superceded by the GCC installation instructions.


File: g77,  Node: Distributing Binaries,  Prev: Complete Installation,  Up: Installation

15.6 Distributing Binaries
==========================

   For users of the GCC-2.95 version of `g77', this information is
superceded by the GCC installation instructions.


File: g77,  Node: Debugging and Interfacing,  Next: Collected Fortran Wisdom,  Prev: Installation,  Up: Top

16 Debugging and Interfacing
****************************

   GNU Fortran currently generates code that is object-compatible with
the `f2c' converter.  Also, it avoids limitations in the current GBE,
such as the inability to generate a procedure with multiple entry
points, by generating code that is structured differently (in terms of
procedure names, scopes, arguments, and so on) than might be expected.

   As a result, writing code in other languages that calls on, is
called by, or shares in-memory data with `g77'-compiled code generally
requires some understanding of the way `g77' compiles code for various
constructs.

   Similarly, using a debugger to debug `g77'-compiled code, even if
that debugger supports native Fortran debugging, generally requires
this sort of information.

   This section describes some of the basic information on how `g77'
compiles code for constructs involving interfaces to other languages
and to debuggers.

   _Caution:_ Much or all of this information pertains to only the
current release of `g77', sometimes even to using certain compiler
options with `g77' (such as `-fno-f2c').  Do not write code that
depends on this information without clearly marking said code as
nonportable and subject to review for every new release of `g77'.  This
information is provided primarily to make debugging of code generated
by this particular release of `g77' easier for the user, and partly to
make writing (generally nonportable) interface code easier.  Both of
these activities require tracking changes in new version of `g77' as
they are installed, because new versions can change the behaviors
described in this section.

* Menu:

* Main Program Unit::  How `g77' compiles a main program unit.
* Procedures::         How `g77' constructs parameter lists
                       for procedures.
* Functions::          Functions returning floating-point or character data.
* Names::              Naming of user-defined variables, procedures, etc.
* Common Blocks::      Accessing common variables while debugging.
* Local Equivalence Areas::  Accessing `EQUIVALENCE' while debugging.
* Complex Variables::  How `g77' performs complex arithmetic.
* Arrays::             Dealing with (possibly multi-dimensional) arrays.
* Adjustable Arrays::  Special consideration for adjustable arrays.
* Alternate Entry Points::  How `g77' implements alternate `ENTRY'.
* Alternate Returns::  How `g77' handles alternate returns.
* Assigned Statement Labels::  How `g77' handles `ASSIGN'.
* Run-time Library Errors::  Meanings of some `IOSTAT=' values.


File: g77,  Node: Main Program Unit,  Next: Procedures,  Up: Debugging and Interfacing

16.1 Main Program Unit (PROGRAM)
================================

   When `g77' compiles a main program unit, it gives it the public
procedure name `MAIN__'.  The `libg2c' library has the actual `main()'
procedure as is typical of C-based environments, and it is this
procedure that performs some initial start-up activity and then calls
`MAIN__'.

   Generally, `g77' and `libg2c' are designed so that you need not
include a main program unit written in Fortran in your program--it can
be written in C or some other language.  Especially for I/O handling,
this is the case, although `g77' version 0.5.16 includes a bug fix for
`libg2c' that solved a problem with using the `OPEN' statement as the
first Fortran I/O activity in a program without a Fortran main program
unit.

   However, if you don't intend to use `g77' (or `f2c') to compile your
main program unit--that is, if you intend to compile a `main()'
procedure using some other language--you should carefully examine the
code for `main()' in `libg2c', found in the source file
`egcs/libf2c/libF77/main.c', to see what kinds of things might need to
be done by your `main()' in order to provide the Fortran environment
your Fortran code is expecting.

   For example, `libg2c''s `main()' sets up the information used by the
`IARGC' and `GETARG' intrinsics.  Bypassing `libg2c''s `main()' without
providing a substitute for this activity would mean that invoking
`IARGC' and `GETARG' would produce undefined results.

   When debugging, one implication of the fact that `main()', which is
the place where the debugged program "starts" from the debugger's point
of view, is in `libg2c' is that you won't be starting your Fortran
program at a point you recognize as your Fortran code.

   The standard way to get around this problem is to set a break point
(a one-time, or temporary, break point will do) at the entrance to
`MAIN__', and then run the program.  A convenient way to do so is to
add the `gdb' command

     tbreak MAIN__

to the file `.gdbinit' in the directory in which you're debugging
(using `gdb').

   After doing this, the debugger will see the current execution point
of the program as at the beginning of the main program unit of your
program.

   Of course, if you really want to set a break point at some other
place in your program and just start the program running, without first
breaking at `MAIN__', that should work fine.


File: g77,  Node: Procedures,  Next: Functions,  Prev: Main Program Unit,  Up: Debugging and Interfacing

16.2 Procedures (SUBROUTINE and FUNCTION)
=========================================

   Currently, `g77' passes arguments via reference--specifically, by
passing a pointer to the location in memory of a variable, array, array
element, a temporary location that holds the result of evaluating an
expression, or a temporary or permanent location that holds the value
of a constant.

   Procedures that accept `CHARACTER' arguments are implemented by
`g77' so that each `CHARACTER' argument has two actual arguments.

   The first argument occupies the expected position in the argument
list and has the user-specified name.  This argument is a pointer to an
array of characters, passed by the caller.

   The second argument is appended to the end of the user-specified
calling sequence and is named `__g77_length_X', where X is the
user-specified name.  This argument is of the C type `ftnlen' (see
`egcs/libf2c/g2c.h.in' for information on that type) and is the number
of characters the caller has allocated in the array pointed to by the
first argument.

   A procedure will ignore the length argument if `X' is not declared
`CHARACTER*(*)', because for other declarations, it knows the length.
Not all callers necessarily "know" this, however, which is why they all
pass the extra argument.

   The contents of the `CHARACTER' argument are specified by the
address passed in the first argument (named after it).  The procedure
can read or write these contents as appropriate.

   When more than one `CHARACTER' argument is present in the argument
list, the length arguments are appended in the order the original
arguments appear.  So `CALL FOO('HI','THERE')' is implemented in C as
`foo("hi","there",2,5);', ignoring the fact that `g77' does not provide
the trailing null bytes on the constant strings (`f2c' does provide
them, but they are unnecessary in a Fortran environment, and you should
not expect them to be there).

   Note that the above information applies to `CHARACTER' variables and
arrays *only*.  It does *not* apply to external `CHARACTER' functions
or to intrinsic `CHARACTER' functions.  That is, no second length
argument is passed to `FOO' in this case:

     CHARACTER X
     EXTERNAL X
     CALL FOO(X)

Nor does `FOO' expect such an argument in this case:

     SUBROUTINE FOO(X)
     CHARACTER X
     EXTERNAL X

   Because of this implementation detail, if a program has a bug such
that there is disagreement as to whether an argument is a procedure,
and the type of the argument is `CHARACTER', subtle symptoms might
appear.


File: g77,  Node: Functions,  Next: Names,  Prev: Procedures,  Up: Debugging and Interfacing

16.3 Functions (FUNCTION and RETURN)
====================================

   `g77' handles in a special way functions that return the following
types:

   * `CHARACTER'

   * `COMPLEX'

   * `REAL(KIND=1)'

   For `CHARACTER', `g77' implements a subroutine (a C function
returning `void') with two arguments prepended: `__g77_result', which
the caller passes as a pointer to a `char' array expected to hold the
return value, and `__g77_length', which the caller passes as an
`ftnlen' value specifying the length of the return value as declared in
the calling program.  For `CHARACTER*(*)', the called function uses
`__g77_length' to determine the size of the array that `__g77_result'
points to; otherwise, it ignores that argument.

   For `COMPLEX', when `-ff2c' is in force, `g77' implements a
subroutine with one argument prepended: `__g77_result', which the
caller passes as a pointer to a variable of the type of the function.
The called function writes the return value into this variable instead
of returning it as a function value.  When `-fno-f2c' is in force,
`g77' implements a `COMPLEX' function as `gcc''s `__complex__ float' or
`__complex__ double' function (or an emulation thereof, when
`-femulate-complex' is in effect), returning the result of the function
in the same way as `gcc' would.

   For `REAL(KIND=1)', when `-ff2c' is in force, `g77' implements a
function that actually returns `REAL(KIND=2)' (typically C's `double'
type).  When `-fno-f2c' is in force, `REAL(KIND=1)' functions return
`float'.


File: g77,  Node: Names,  Next: Common Blocks,  Prev: Functions,  Up: Debugging and Interfacing

16.4 Names
==========

   Fortran permits each implementation to decide how to represent names
as far as how they're seen in other contexts, such as debuggers and
when interfacing to other languages, and especially as far as how
casing is handled.

   External names--names of entities that are public, or "accessible",
to all modules in a program--normally have an underscore (`_') appended
by `g77', to generate code that is compatible with `f2c'.  External
names include names of Fortran things like common blocks, external
procedures (subroutines and functions, but not including statement
functions, which are internal procedures), and entry point names.

   However, use of the `-fno-underscoring' option disables this kind of
transformation of external names (though inhibiting the transformation
certainly improves the chances of colliding with incompatible externals
written in other languages--but that might be intentional.

   When `-funderscoring' is in force, any name (external or local) that
already has at least one underscore in it is implemented by `g77' by
appending two underscores.  (This second underscore can be disabled via
the `-fno-second-underscore' option.)  External names are changed this
way for `f2c' compatibility.  Local names are changed this way to avoid
collisions with external names that are different in the source
code--`f2c' does the same thing, but there's no compatibility issue
there except for user expectations while debugging.

   For example:

     Max_Cost = 0

Here, a user would, in the debugger, refer to this variable using the
name `max_cost__' (or `MAX_COST__' or `Max_Cost__', as described below).
(We hope to improve `g77' in this regard in the future--don't write
scripts depending on this behavior!  Also, consider experimenting with
the `-fno-underscoring' option to try out debugging without having to
massage names by hand like this.)

   `g77' provides a number of command-line options that allow the user
to control how case mapping is handled for source files.  The default
is the traditional UNIX model for Fortran compilers--names are mapped
to lower case.  Other command-line options can be specified to map
names to upper case, or to leave them exactly as written in the source
file.

   For example:

     Foo = 9.436

Here, it is normally the case that the variable assigned will be named
`foo'.  This would be the name to enter when using a debugger to access
the variable.

   However, depending on the command-line options specified, the name
implemented by `g77' might instead be `FOO' or even `Foo', thus
affecting how debugging is done.

   Also:

     Call Foo

This would normally call a procedure that, if it were in a separate C
program, be defined starting with the line:

     void foo_()

However, `g77' command-line options could be used to change the casing
of names, resulting in the name `FOO_' or `Foo_' being given to the
procedure instead of `foo_', and the `-fno-underscoring' option could
be used to inhibit the appending of the underscore to the name.


File: g77,  Node: Common Blocks,  Next: Local Equivalence Areas,  Prev: Names,  Up: Debugging and Interfacing

16.5 Common Blocks (COMMON)
===========================

   `g77' names and lays out `COMMON' areas the same way `f2c' does, for
compatibility with `f2c'.

   Currently, `g77' does not emit "true" debugging information for
members of a `COMMON' area, due to an apparent bug in the GBE.

   (As of Version 0.5.19, `g77' emits debugging information for such
members in the form of a constant string specifying the base name of
the aggregate area and the offset of the member in bytes from the start
of the area.  Use the `-fdebug-kludge' option to enable this behavior.
In `gdb', use `set language c' before printing the value of the member,
then `set language fortran' to restore the default language, since
`gdb' doesn't provide a way to print a readable version of a character
string in Fortran language mode.

   This kludge will be removed in a future version of `g77' that, in
conjunction with a contemporary version of `gdb', properly supports
Fortran-language debugging, including access to members of `COMMON'
areas.)

   *Note Options for Code Generation Conventions: Code Gen Options, for
information on the `-fdebug-kludge' option.

   Moreover, `g77' currently implements a `COMMON' area such that its
type is an array of the C `char' data type.

   So, when debugging, you must know the offset into a `COMMON' area
for a particular item in that area, and you have to take into account
the appropriate multiplier for the respective sizes of the types (as
declared in your code) for the items preceding the item in question as
compared to the size of the `char' type.

   For example, using default implicit typing, the statement

     COMMON I(15), R(20), T

results in a public 144-byte `char' array named `_BLNK__' with `I'
placed at `_BLNK__[0]', `R' at `_BLNK__[60]', and `T' at `_BLNK__[140]'.
(This is assuming that the target machine for the compilation has
4-byte `INTEGER(KIND=1)' and `REAL(KIND=1)' types.)


File: g77,  Node: Local Equivalence Areas,  Next: Complex Variables,  Prev: Common Blocks,  Up: Debugging and Interfacing

16.6 Local Equivalence Areas (EQUIVALENCE)
==========================================

   `g77' treats storage-associated areas involving a `COMMON' block as
explained in the section on common blocks.

   A local `EQUIVALENCE' area is a collection of variables and arrays
connected to each other in any way via `EQUIVALENCE', none of which are
listed in a `COMMON' statement.

   Currently, `g77' does not emit "true" debugging information for
members in a local `EQUIVALENCE' area, due to an apparent bug in the
GBE.

   (As of Version 0.5.19, `g77' does emit debugging information for such
members in the form of a constant string specifying the base name of
the aggregate area and the offset of the member in bytes from the start
of the area.  Use the `-fdebug-kludge' option to enable this behavior.
In `gdb', use `set language c' before printing the value of the member,
then `set language fortran' to restore the default language, since
`gdb' doesn't provide a way to print a readable version of a character
string in Fortran language mode.

   This kludge will be removed in a future version of `g77' that, in
conjunction with a contemporary version of `gdb', properly supports
Fortran-language debugging, including access to members of
`EQUIVALENCE' areas.)

   *Note Options for Code Generation Conventions: Code Gen Options, for
information on the `-fdebug-kludge' option.

   Moreover, `g77' implements a local `EQUIVALENCE' area such that its
type is an array of the C `char' data type.

   The name `g77' gives this array of `char' type is `__g77_equiv_X',
where X is the name of the item that is placed at the beginning (offset
0) of this array.  If more than one such item is placed at the
beginning, X is the name that sorts to the top in an alphabetical sort
of the list of such items.

   When debugging, you must therefore access members of `EQUIVALENCE'
areas by specifying the appropriate `__g77_equiv_X' array section with
the appropriate offset.  See the explanation of debugging `COMMON'
blocks for info applicable to debugging local `EQUIVALENCE' areas.

   (_Note:_ `g77' version 0.5.18 and earlier chose the name for X using
a different method when more than one name was in the list of names of
entities placed at the beginning of the array.  Though the
documentation specified that the first name listed in the `EQUIVALENCE'
statements was chosen for X, `g77' in fact chose the name using a
method that was so complicated, it seemed easier to change it to an
alphabetical sort than to describe the previous method in the
documentation.)


File: g77,  Node: Complex Variables,  Next: Arrays,  Prev: Local Equivalence Areas,  Up: Debugging and Interfacing

16.7 Complex Variables (COMPLEX)
================================

   As of 0.5.20, `g77' defaults to handling `COMPLEX' types (and
related intrinsics, constants, functions, and so on) in a manner that
makes direct debugging involving these types in Fortran language mode
difficult.

   Essentially, `g77' implements these types using an internal
construct similar to C's `struct', at least as seen by the `gcc' back
end.

   Currently, the back end, when outputting debugging info with the
compiled code for the assembler to digest, does not detect these
`struct' types as being substitutes for Fortran complex.  As a result,
the Fortran language modes of debuggers such as `gdb' see these types
as C `struct' types, which they might or might not support.

   Until this is fixed, switch to C language mode to work with entities
of `COMPLEX' type and then switch back to Fortran language mode
afterward.  (In `gdb', this is accomplished via `set lang c' and either
`set lang fortran' or `set lang auto'.)


File: g77,  Node: Arrays,  Next: Adjustable Arrays,  Prev: Complex Variables,  Up: Debugging and Interfacing

16.8 Arrays (DIMENSION)
=======================

   Fortran uses "column-major ordering" in its arrays.  This differs
from other languages, such as C, which use "row-major ordering".  The
difference is that, with Fortran, array elements adjacent to each other
in memory differ in the _first_ subscript instead of the last;
`A(5,10,20)' immediately follows `A(4,10,20)', whereas with row-major
ordering it would follow `A(5,10,19)'.

   This consideration affects not only interfacing with and debugging
Fortran code, it can greatly affect how code is designed and written,
especially when code speed and size is a concern.

   Fortran also differs from C, a popular language for interfacing and
to support directly in debuggers, in the way arrays are treated.  In C,
arrays are single-dimensional and have interesting relationships to
pointers, neither of which is true for Fortran.  As a result, dealing
with Fortran arrays from within an environment limited to C concepts
can be challenging.

   For example, accessing the array element `A(5,10,20)' is easy enough
in Fortran (use `A(5,10,20)'), but in C some difficult machinations are
needed.  First, C would treat the A array as a single-dimension array.
Second, C does not understand low bounds for arrays as does Fortran.
Third, C assumes a low bound of zero (0), while Fortran defaults to a
low bound of one (1) and can supports an arbitrary low bound.
Therefore, calculations must be done to determine what the C equivalent
of `A(5,10,20)' would be, and these calculations require knowing the
dimensions of `A'.

   For `DIMENSION A(2:11,21,0:29)', the calculation of the offset of
`A(5,10,20)' would be:

       (5-2)
     + (10-1)*(11-2+1)
     + (20-0)*(11-2+1)*(21-1+1)
     = 4293

So the C equivalent in this case would be `a[4293]'.

   When using a debugger directly on Fortran code, the C equivalent
might not work, because some debuggers cannot understand the notion of
low bounds other than zero.  However, unlike `f2c', `g77' does inform
the GBE that a multi-dimensional array (like `A' in the above example)
is really multi-dimensional, rather than a single-dimensional array, so
at least the dimensionality of the array is preserved.

   Debuggers that understand Fortran should have no trouble with
non-zero low bounds, but for non-Fortran debuggers, especially C
debuggers, the above example might have a C equivalent of `a[4305]'.
This calculation is arrived at by eliminating the subtraction of the
lower bound in the first parenthesized expression on each line--that
is, for `(5-2)' substitute `(5)', for `(10-1)' substitute `(10)', and
for `(20-0)' substitute `(20)'.  Actually, the implication of this can
be that the expression `*(&a[2][1][0] + 4293)' works fine, but that
`a[20][10][5]' produces the equivalent of `*(&a[0][0][0] + 4305)'
because of the missing lower bounds.

   Come to think of it, perhaps the behavior is due to the debugger
internally compensating for the lower bounds by offsetting the base
address of `a', leaving `&a' set lower, in this case, than
`&a[2][1][0]' (the address of its first element as identified by
subscripts equal to the corresponding lower bounds).

   You know, maybe nobody really needs to use arrays.


File: g77,  Node: Adjustable Arrays,  Next: Alternate Entry Points,  Prev: Arrays,  Up: Debugging and Interfacing

16.9 Adjustable Arrays (DIMENSION)
==================================

   Adjustable and automatic arrays in Fortran require the implementation
(in this case, the `g77' compiler) to "memorize" the expressions that
dimension the arrays each time the procedure is invoked.  This is so
that subsequent changes to variables used in those expressions, made
during execution of the procedure, do not have any effect on the
dimensions of those arrays.

   For example:

     REAL ARRAY(5)
     DATA ARRAY/5*2/
     CALL X(ARRAY, 5)
     END
     SUBROUTINE X(A, N)
     DIMENSION A(N)
     N = 20
     PRINT *, N, A
     END

Here, the implementation should, when running the program, print
something like:

     20   2.  2.  2.  2.  2.

Note that this shows that while the value of `N' was successfully
changed, the size of the `A' array remained at 5 elements.

   To support this, `g77' generates code that executes before any user
code (and before the internally generated computed `GOTO' to handle
alternate entry points, as described below) that evaluates each
(nonconstant) expression in the list of subscripts for an array, and
saves the result of each such evaluation to be used when determining
the size of the array (instead of re-evaluating the expressions).

   So, in the above example, when `X' is first invoked, code is
executed that copies the value of `N' to a temporary.  And that same
temporary serves as the actual high bound for the single dimension of
the `A' array (the low bound being the constant 1).  Since the user
program cannot (legitimately) change the value of the temporary during
execution of the procedure, the size of the array remains constant
during each invocation.

   For alternate entry points, the code `g77' generates takes into
account the possibility that a dummy adjustable array is not actually
passed to the actual entry point being invoked at that time.  In that
case, the public procedure implementing the entry point passes to the
master private procedure implementing all the code for the entry points
a `NULL' pointer where a pointer to that adjustable array would be
expected.  The `g77'-generated code doesn't attempt to evaluate any of
the expressions in the subscripts for an array if the pointer to that
array is `NULL' at run time in such cases.  (Don't depend on this
particular implementation by writing code that purposely passes `NULL'
pointers where the callee expects adjustable arrays, even if you know
the callee won't reference the arrays--nor should you pass `NULL'
pointers for any dummy arguments used in calculating the bounds of such
arrays or leave undefined any values used for that purpose in
COMMON--because the way `g77' implements these things might change in
the future!)


File: g77,  Node: Alternate Entry Points,  Next: Alternate Returns,  Prev: Adjustable Arrays,  Up: Debugging and Interfacing

16.10 Alternate Entry Points (ENTRY)
====================================

   The GBE does not understand the general concept of alternate entry
points as Fortran provides via the ENTRY statement.  `g77' gets around
this by using an approach to compiling procedures having at least one
`ENTRY' statement that is almost identical to the approach used by
`f2c'.  (An alternate approach could be used that would probably
generate faster, but larger, code that would also be a bit easier to
debug.)

   Information on how `g77' implements `ENTRY' is provided for those
trying to debug such code.  The choice of implementation seems unlikely
to affect code (compiled in other languages) that interfaces to such
code.

   `g77' compiles exactly one public procedure for the primary entry
point of a procedure plus each `ENTRY' point it specifies, as usual.
That is, in terms of the public interface, there is no difference
between

     SUBROUTINE X
     END
     SUBROUTINE Y
     END

and:

     SUBROUTINE X
     ENTRY Y
     END

   The difference between the above two cases lies in the code compiled
for the `X' and `Y' procedures themselves, plus the fact that, for the
second case, an extra internal procedure is compiled.

   For every Fortran procedure with at least one `ENTRY' statement,
`g77' compiles an extra procedure named `__g77_masterfun_X', where X is
the name of the primary entry point (which, in the above case, using
the standard compiler options, would be `x_' in C).

   This extra procedure is compiled as a private procedure--that is, a
procedure not accessible by name to separately compiled modules.  It
contains all the code in the program unit, including the code for the
primary entry point plus for every entry point.  (The code for each
public procedure is quite short, and explained later.)

   The extra procedure has some other interesting characteristics.

   The argument list for this procedure is invented by `g77'.  It
contains a single integer argument named `__g77_which_entrypoint',
passed by value (as in Fortran's `%VAL()' intrinsic), specifying the
entry point index--0 for the primary entry point, 1 for the first entry
point (the first `ENTRY' statement encountered), 2 for the second entry
point, and so on.

   It also contains, for functions returning `CHARACTER' and (when
`-ff2c' is in effect) `COMPLEX' functions, and for functions returning
different types among the `ENTRY' statements (e.g. `REAL FUNCTION R()'
containing `ENTRY I()'), an argument named `__g77_result' that is
expected at run time to contain a pointer to where to store the result
of the entry point.  For `CHARACTER' functions, this storage area is an
array of the appropriate number of characters; for `COMPLEX' functions,
it is the appropriate area for the return type; for
multiple-return-type functions, it is a union of all the supported
return types (which cannot include `CHARACTER', since combining
`CHARACTER' and non-`CHARACTER' return types via `ENTRY' in a single
function is not supported by `g77').

   For `CHARACTER' functions, the `__g77_result' argument is followed
by yet another argument named `__g77_length' that, at run time,
specifies the caller's expected length of the returned value.  Note
that only `CHARACTER*(*)' functions and entry points actually make use
of this argument, even though it is always passed by all callers of
public `CHARACTER' functions (since the caller does not generally know
whether such a function is `CHARACTER*(*)' or whether there are any
other callers that don't have that information).

   The rest of the argument list is the union of all the arguments
specified for all the entry points (in their usual forms, e.g.
`CHARACTER' arguments have extra length arguments, all appended at the
end of this list).  This is considered the "master list" of arguments.

   The code for this procedure has, before the code for the first
executable statement, code much like that for the following Fortran
statement:

            GOTO (100000,100001,100002), __g77_which_entrypoint
     100000 ...code for primary entry point...
     100001 ...code immediately following first ENTRY statement...
     100002 ...code immediately following second ENTRY statement...

(Note that invalid Fortran statement labels and variable names are used
in the above example to highlight the fact that it represents code
generated by the `g77' internals, not code to be written by the user.)

   It is this code that, when the procedure is called, picks which
entry point to start executing.

   Getting back to the public procedures (`x' and `Y' in the original
example), those procedures are fairly simple.  Their interfaces are
just like they would be if they were self-contained procedures (without
`ENTRY'), of course, since that is what the callers expect.  Their code
consists of simply calling the private procedure, described above, with
the appropriate extra arguments (the entry point index, and perhaps a
pointer to a multiple-type- return variable, local to the public
procedure, that contains all the supported returnable non-character
types).  For arguments that are not listed for a given entry point that
are listed for other entry points, and therefore that are in the
"master list" for the private procedure, null pointers (in C, the
`NULL' macro) are passed.  Also, for entry points that are part of a
multiple-type- returning function, code is compiled after the call of
the private procedure to extract from the multi-type union the
appropriate result, depending on the type of the entry point in
question, returning that result to the original caller.

   When debugging a procedure containing alternate entry points, you
can either set a break point on the public procedure itself (e.g.  a
break point on `X' or `Y') or on the private procedure that contains
most of the pertinent code (e.g. `__g77_masterfun_X').  If you do the
former, you should use the debugger's command to "step into" the called
procedure to get to the actual code; with the latter approach, the
break point leaves you right at the actual code, skipping over the
public entry point and its call to the private procedure (unless you
have set a break point there as well, of course).

   Further, the list of dummy arguments that is visible when the
private procedure is active is going to be the expanded version of the
list for whichever particular entry point is active, as explained
above, and the way in which return values are handled might well be
different from how they would be handled for an equivalent single-entry
function.


File: g77,  Node: Alternate Returns,  Next: Assigned Statement Labels,  Prev: Alternate Entry Points,  Up: Debugging and Interfacing

16.11 Alternate Returns (SUBROUTINE and RETURN)
===============================================

   Subroutines with alternate returns (e.g. `SUBROUTINE X(*)' and `CALL
X(*50)') are implemented by `g77' as functions returning the C `int'
type.  The actual alternate-return arguments are omitted from the
calling sequence.  Instead, the caller uses the return value to do a
rough equivalent of the Fortran computed-`GOTO' statement, as in `GOTO
(50), X()' in the example above (where `X' is quietly declared as an
`INTEGER(KIND=1)' function), and the callee just returns whatever
integer is specified in the `RETURN' statement for the subroutine For
example, `RETURN 1' is implemented as `X = 1' followed by `RETURN' in
C, and `RETURN' by itself is `X = 0' and `RETURN').


File: g77,  Node: Assigned Statement Labels,  Next: Run-time Library Errors,  Prev: Alternate Returns,  Up: Debugging and Interfacing

16.12 Assigned Statement Labels (ASSIGN and GOTO)
=================================================

   For portability to machines where a pointer (such as to a label,
which is how `g77' implements `ASSIGN' and its relatives, the
assigned-`GOTO' and assigned-`FORMAT'-I/O statements) is wider
(bitwise) than an `INTEGER(KIND=1)', `g77' uses a different memory
location to hold the `ASSIGN'ed value of a variable than it does the
numerical value in that variable, unless the variable is wide enough
(can hold enough bits).

   In particular, while `g77' implements

     I = 10

as, in C notation, `i = 10;', it implements

     ASSIGN 10 TO I

as, in GNU's extended C notation (for the label syntax),
`__g77_ASSIGN_I = &&L10;' (where `L10' is just a massaging of the
Fortran label `10' to make the syntax C-like; `g77' doesn't actually
generate the name `L10' or any other name like that, since debuggers
cannot access labels anyway).

   While this currently means that an `ASSIGN' statement does not
overwrite the numeric contents of its target variable, _do not_ write
any code depending on this feature.  `g77' has already changed this
implementation across versions and might do so in the future.  This
information is provided only to make debugging Fortran programs
compiled with the current version of `g77' somewhat easier.  If there's
no debugger-visible variable named `__g77_ASSIGN_I' in a program unit
that does `ASSIGN 10 TO I', that probably means `g77' has decided it
can store the pointer to the label directly into `I' itself.

   *Note Ugly Assigned Labels::, for information on a command-line
option to force `g77' to use the same storage for both normal and
assigned-label uses of a variable.


File: g77,  Node: Run-time Library Errors,  Prev: Assigned Statement Labels,  Up: Debugging and Interfacing

16.13 Run-time Library Errors
=============================

   The `libg2c' library currently has the following table to relate
error code numbers, returned in `IOSTAT=' variables, to messages.  This
information should, in future versions of this document, be expanded
upon to include detailed descriptions of each message.

   In line with good coding practices, any of the numbers in the list
below should _not_ be directly written into Fortran code you write.
Instead, make a separate `INCLUDE' file that defines `PARAMETER' names
for them, and use those in your code, so you can more easily change the
actual numbers in the future.

   The information below is culled from the definition of `F_err' in
`f/runtime/libI77/err.c' in the `g77' source tree.

     100: "error in format"
     101: "illegal unit number"
     102: "formatted io not allowed"
     103: "unformatted io not allowed"
     104: "direct io not allowed"
     105: "sequential io not allowed"
     106: "can't backspace file"
     107: "null file name"
     108: "can't stat file"
     109: "unit not connected"
     110: "off end of record"
     111: "truncation failed in endfile"
     112: "incomprehensible list input"
     113: "out of free space"
     114: "unit not connected"
     115: "read unexpected character"
     116: "bad logical input field"
     117: "bad variable type"
     118: "bad namelist name"
     119: "variable not in namelist"
     120: "no end record"
     121: "variable count incorrect"
     122: "subscript for scalar variable"
     123: "invalid array section"
     124: "substring out of bounds"
     125: "subscript out of bounds"
     126: "can't read file"
     127: "can't write file"
     128: "'new' file exists"
     129: "can't append to file"
     130: "non-positive record number"
     131: "I/O started while already doing I/O"


File: g77,  Node: Collected Fortran Wisdom,  Next: Trouble,  Prev: Debugging and Interfacing,  Up: Top

17 Collected Fortran Wisdom
***************************

   Most users of `g77' can be divided into two camps:

   * Those writing new Fortran code to be compiled by `g77'.

   * Those using `g77' to compile existing, "legacy" code.

   Users writing new code generally understand most of the necessary
aspects of Fortran to write "mainstream" code, but often need help
deciding how to handle problems, such as the construction of libraries
containing `BLOCK DATA'.

   Users dealing with "legacy" code sometimes don't have much
experience with Fortran, but believe that the code they're compiling
already works when compiled by other compilers (and might not
understand why, as is sometimes the case, it doesn't work when compiled
by `g77').

   The following information is designed to help users do a better job
coping with existing, "legacy" Fortran code, and with writing new code
as well.

* Menu:

* Advantages Over f2c::        If `f2c' is so great, why `g77'?
* Block Data and Libraries::   How `g77' solves a common problem.
* Loops::                      Fortran `DO' loops surprise many people.
* Working Programs::           Getting programs to work should be done first.
* Overly Convenient Options::  Temptations to avoid, habits to not form.
* Faster Programs::            Everybody wants these, but at what cost?


File: g77,  Node: Advantages Over f2c,  Next: Block Data and Libraries,  Up: Collected Fortran Wisdom

17.1 Advantages Over f2c
========================

   Without `f2c', `g77' would have taken much longer to do and probably
not been as good for quite a while.  Sometimes people who notice how
much `g77' depends on, and documents encouragement to use, `f2c' ask
why `g77' was created if `f2c' already existed.

   This section gives some basic answers to these questions, though it
is not intended to be comprehensive.

* Menu:

* Language Extensions::  Features used by Fortran code.
* Diagnostic Abilities:: Abilities to spot problems early.
* Compiler Options::     Features helpful to accommodate legacy code, etc.
* Compiler Speed::       Speed of the compilation process.
* Program Speed::        Speed of the generated, optimized code.
* Ease of Debugging::    Debugging ease-of-use at the source level.
* Character and Hollerith Constants::  A byte saved is a byte earned.


File: g77,  Node: Language Extensions,  Next: Diagnostic Abilities,  Up: Advantages Over f2c

17.1.1 Language Extensions
--------------------------

   `g77' offers several extensions to FORTRAN 77 language that `f2c'
doesn't:

   * Automatic arrays

   * `CYCLE' and `EXIT'

   * Construct names

   * `SELECT CASE'

   * `KIND=' and `LEN=' notation

   * Semicolon as statement separator

   * Constant expressions in `FORMAT' statements (such as
     `FORMAT(I<J>)', where `J' is a `PARAMETER' named constant)

   * `MvBits' intrinsic

   * `libU77' (Unix-compatibility) library, with routines known to
     compiler as intrinsics (so they work even when compiler options
     are used to change the interfaces used by Fortran routines)

   `g77' also implements iterative `DO' loops so that they work even in
the presence of certain "extreme" inputs, unlike `f2c'.  *Note Loops::.

   However, `f2c' offers a few that `g77' doesn't, such as:

   * Intrinsics in `PARAMETER' statements

   * Array bounds expressions (such as `REAL M(N(2))')

   * `AUTOMATIC' statement

   It is expected that `g77' will offer some or all of these missing
features at some time in the future.


File: g77,  Node: Diagnostic Abilities,  Next: Compiler Options,  Prev: Language Extensions,  Up: Advantages Over f2c

17.1.2 Diagnostic Abilities
---------------------------

   `g77' offers better diagnosis of problems in `FORMAT' statements.
`f2c' doesn't, for example, emit any diagnostic for
`FORMAT(XZFAJG10324)', leaving that to be diagnosed, at run time, by
the `libf2c' run-time library.


File: g77,  Node: Compiler Options,  Next: Compiler Speed,  Prev: Diagnostic Abilities,  Up: Advantages Over f2c

17.1.3 Compiler Options
-----------------------

   `g77' offers compiler options that `f2c' doesn't, most of which are
designed to more easily accommodate legacy code:

   * Two that control the automatic appending of extra underscores to
     external names

   * One that allows dollar signs (`$') in symbol names

   * A variety that control acceptance of various "ugly" constructs

   * Several that specify acceptable use of upper and lower case in the
     source code

   * Many that enable, disable, delete, or hide groups of intrinsics

   * One to specify the length of fixed-form source lines (normally 72)

   * One to specify the the source code is written in Fortran-90-style
     free-form

   However, `f2c' offers a few that `g77' doesn't, like an option to
have `REAL' default to `REAL*8'.  It is expected that `g77' will offer
all of the missing options pertinent to being a Fortran compiler at
some time in the future.


File: g77,  Node: Compiler Speed,  Next: Program Speed,  Prev: Compiler Options,  Up: Advantages Over f2c

17.1.4 Compiler Speed
---------------------

   Saving the steps of writing and then rereading C code is a big reason
why `g77' should be able to compile code much faster than using `f2c'
in conjunction with the equivalent invocation of `gcc'.

   However, due to `g77''s youth, lots of self-checking is still being
performed.  As a result, this improvement is as yet unrealized (though
the potential seems to be there for quite a big speedup in the future).
It is possible that, as of version 0.5.18, `g77' is noticeably faster
compiling many Fortran source files than using `f2c' in conjunction
with `gcc'.


File: g77,  Node: Program Speed,  Next: Ease of Debugging,  Prev: Compiler Speed,  Up: Advantages Over f2c

17.1.5 Program Speed
--------------------

   `g77' has the potential to better optimize code than `f2c', even
when `gcc' is used to compile the output of `f2c', because `f2c' must
necessarily translate Fortran into a somewhat lower-level language (C)
that cannot preserve all the information that is potentially useful for
optimization, while `g77' can gather, preserve, and transmit that
information directly to the GBE.

   For example, `g77' implements `ASSIGN' and assigned `GOTO' using
direct assignment of pointers to labels and direct jumps to labels,
whereas `f2c' maps the assigned labels to integer values and then uses
a C `switch' statement to encode the assigned `GOTO' statements.

   However, as is typical, theory and reality don't quite match, at
least not in all cases, so it is still the case that `f2c' plus `gcc'
can generate code that is faster than `g77'.

   Version 0.5.18 of `g77' offered default settings and options, via
patches to the `gcc' back end, that allow for better program speed,
though some of these improvements also affected the performance of
programs translated by `f2c' and then compiled by `g77''s version of
`gcc'.

   Version 0.5.20 of `g77' offers further performance improvements, at
least one of which (alias analysis) is not generally applicable to
`f2c' (though `f2c' could presumably be changed to also take advantage
of this new capability of the `gcc' back end, assuming this is made
available in an upcoming release of `gcc').


File: g77,  Node: Ease of Debugging,  Next: Character and Hollerith Constants,  Prev: Program Speed,  Up: Advantages Over f2c

17.1.6 Ease of Debugging
------------------------

   Because `g77' compiles directly to assembler code like `gcc',
instead of translating to an intermediate language (C) as does `f2c',
support for debugging can be better for `g77' than `f2c'.

   However, although `g77' might be somewhat more "native" in terms of
debugging support than `f2c' plus `gcc', there still are a lot of
things "not quite right".  Many of the important ones should be
resolved in the near future.

   For example, `g77' doesn't have to worry about reserved names like
`f2c' does.  Given `FOR = WHILE', `f2c' must necessarily translate this
to something _other_ than `for = while;', because C reserves those
words.

   However, `g77' does still uses things like an extra level of
indirection for `ENTRY'-laden procedures--in this case, because the
back end doesn't yet support multiple entry points.

   Another example is that, given

     COMMON A, B
     EQUIVALENCE (B, C)

the `g77' user should be able to access the variables directly, by name,
without having to traverse C-like structures and unions, while `f2c' is
unlikely to ever offer this ability (due to limitations in the C
language).

   However, due to apparent bugs in the back end, `g77' currently
doesn't take advantage of this facility at all--it doesn't emit any
debugging information for `COMMON' and `EQUIVALENCE' areas, other than
information on the array of `char' it creates (and, in the case of
local `EQUIVALENCE', names) for each such area.

   Yet another example is arrays.  `g77' represents them to the debugger
using the same "dimensionality" as in the source code, while `f2c' must
necessarily convert them all to one-dimensional arrays to fit into the
confines of the C language.  However, the level of support offered by
debuggers for interactive Fortran-style access to arrays as compiled by
`g77' can vary widely.  In some cases, it can actually be an advantage
that `f2c' converts everything to widely supported C semantics.

   In fairness, `g77' could do many of the things `f2c' does to get
things working at least as well as `f2c'--for now, the developers
prefer making `g77' work the way they think it is supposed to, and
finding help improving the other products (the back end of `gcc';
`gdb'; and so on) to get things working properly.


File: g77,  Node: Character and Hollerith Constants,  Prev: Ease of Debugging,  Up: Advantages Over f2c

17.1.7 Character and Hollerith Constants
----------------------------------------

   To avoid the extensive hassle that would be needed to avoid this,
`f2c' uses C character constants to encode character and Hollerith
constants.  That means a constant like `'HELLO'' is translated to
`"hello"' in C, which further means that an extra null byte is present
at the end of the constant.  This null byte is superfluous.

   `g77' does not generate such null bytes.  This represents significant
savings of resources, such as on systems where `/dev/null' or
`/dev/zero' represent bottlenecks in the systems' performance, because
`g77' simply asks for fewer zeros from the operating system than `f2c'.
(Avoiding spurious use of zero bytes, each byte typically have eight
zero bits, also reduces the liabilities in case Microsoft's rumored
patent on the digits 0 and 1 is upheld.)


File: g77,  Node: Block Data and Libraries,  Next: Loops,  Prev: Advantages Over f2c,  Up: Collected Fortran Wisdom

17.2 Block Data and Libraries
=============================

   To ensure that block data program units are linked, especially a
concern when they are put into libraries, give each one a name (as in
`BLOCK DATA FOO') and make sure there is an `EXTERNAL FOO' statement in
every program unit that uses any common block initialized by the
corresponding `BLOCK DATA'.  `g77' currently compiles a `BLOCK DATA' as
if it were a `SUBROUTINE', that is, it generates an actual procedure
having the appropriate name.  The procedure does nothing but return
immediately if it happens to be called.  For `EXTERNAL FOO', where
`FOO' is not otherwise referenced in the same program unit, `g77'
assumes there exists a `BLOCK DATA FOO' in the program and ensures that
by generating a reference to it so the linker will make sure it is
present.  (Specifically, `g77' outputs in the data section a static
pointer to the external name `FOO'.)

   The implementation `g77' currently uses to make this work is one of
the few things not compatible with `f2c' as currently shipped.  `f2c'
currently does nothing with `EXTERNAL FOO' except issue a warning that
`FOO' is not otherwise referenced, and, for `BLOCK DATA FOO', `f2c'
doesn't generate a dummy procedure with the name `FOO'.  The upshot is
that you shouldn't mix `f2c' and `g77' in this particular case.  If you
use `f2c' to compile `BLOCK DATA FOO', then any `g77'-compiled program
unit that says `EXTERNAL FOO' will result in an unresolved reference
when linked.  If you do the opposite, then `FOO' might not be linked in
under various circumstances (such as when `FOO' is in a library, or
you're using a "clever" linker--so clever, it produces a broken program
with little or no warning by omitting initializations of global data
because they are contained in unreferenced procedures).

   The changes you make to your code to make `g77' handle this
situation, however, appear to be a widely portable way to handle it.
That is, many systems permit it (as they should, since the FORTRAN 77
standard permits `EXTERNAL FOO' when `FOO' is a block data program
unit), and of the ones that might not link `BLOCK DATA FOO' under some
circumstances, most of them appear to do so once `EXTERNAL FOO' is
present in the appropriate program units.

   Here is the recommended approach to modifying a program containing a
program unit such as the following:

     BLOCK DATA FOO
     COMMON /VARS/ X, Y, Z
     DATA X, Y, Z / 3., 4., 5. /
     END

If the above program unit might be placed in a library module, then
ensure that every program unit in every program that references that
particular `COMMON' area uses the `EXTERNAL' statement to force the
area to be initialized.

   For example, change a program unit that starts with

     INTEGER FUNCTION CURX()
     COMMON /VARS/ X, Y, Z
     CURX = X
     END

so that it uses the `EXTERNAL' statement, as in:

     INTEGER FUNCTION CURX()
     COMMON /VARS/ X, Y, Z
     EXTERNAL FOO
     CURX = X
     END

That way, `CURX' is compiled by `g77' (and many other compilers) so
that the linker knows it must include `FOO', the `BLOCK DATA' program
unit that sets the initial values for the variables in `VAR', in the
executable program.


File: g77,  Node: Loops,  Next: Working Programs,  Prev: Block Data and Libraries,  Up: Collected Fortran Wisdom

17.3 Loops
==========

   The meaning of a `DO' loop in Fortran is precisely specified in the
Fortran standard...and is quite different from what many programmers
might expect.

   In particular, Fortran iterative `DO' loops are implemented as if
the number of trips through the loop is calculated _before_ the loop is
entered.

   The number of trips for a loop is calculated from the START, END,
and INCREMENT values specified in a statement such as:

     DO ITER = START, END, INCREMENT

The trip count is evaluated using a fairly simple formula based on the
three values following the `=' in the statement, and it is that trip
count that is effectively decremented during each iteration of the loop.
If, at the beginning of an iteration of the loop, the trip count is
zero or negative, the loop terminates.  The per-loop-iteration
modifications to ITER are not related to determining whether to
terminate the loop.

   There are two important things to remember about the trip count:

   * It can be _negative_, in which case it is treated as if it was
     zero--meaning the loop is not executed at all.

   * The type used to _calculate_ the trip count is the same type as
     ITER, but the final calculation, and thus the type of the trip
     count itself, always is `INTEGER(KIND=1)'.

   These two items mean that there are loops that cannot be written in
straightforward fashion using the Fortran `DO'.

   For example, on a system with the canonical 32-bit two's-complement
implementation of `INTEGER(KIND=1)', the following loop will not work:

     DO I = -2000000000, 2000000000

Although the START and END values are well within the range of
`INTEGER(KIND=1)', the _trip count_ is not.  The expected trip count is
40000000001, which is outside the range of `INTEGER(KIND=1)' on many
systems.

   Instead, the above loop should be constructed this way:

     I = -2000000000
     DO
       IF (I .GT. 2000000000) EXIT
       ...
       I = I + 1
     END DO

The simple `DO' construct and the `EXIT' statement (used to leave the
innermost loop) are F90 features that `g77' supports.

   Some Fortran compilers have buggy implementations of `DO', in that
they don't follow the standard.  They implement `DO' as a
straightforward translation to what, in C, would be a `for' statement.
Instead of creating a temporary variable to hold the trip count as
calculated at run time, these compilers use the iteration variable ITER
to control whether the loop continues at each iteration.

   The bug in such an implementation shows up when the trip count is
within the range of the type of ITER, but the magnitude of `ABS(END) +
ABS(INCR)' exceeds that range.  For example:

     DO I = 2147483600, 2147483647

A loop started by the above statement will work as implemented by
`g77', but the use, by some compilers, of a more C-like implementation
akin to

     for (i = 2147483600; i <= 2147483647; ++i)

produces a loop that does not terminate, because `i' can never be
greater than 2147483647, since incrementing it beyond that value
overflows `i', setting it to -2147483648.  This is a large, negative
number that still is less than 2147483647.

   Another example of unexpected behavior of `DO' involves using a
nonintegral iteration variable ITER, that is, a `REAL' variable.
Consider the following program:

           DATA BEGIN, END, STEP /.1, .31, .007/
           DO 10 R = BEGIN, END, STEP
              IF (R .GT. END) PRINT *, R, ' .GT. ', END, '!!'
              PRINT *,R
     10    CONTINUE
           PRINT *,'LAST = ',R
           IF (R .LE. END) PRINT *, R, ' .LE. ', END, '!!'
           END

A C-like view of `DO' would hold that the two "exclamatory" `PRINT'
statements are never executed.  However, this is the output of running
the above program as compiled by `g77' on a GNU/Linux ix86 system:

      .100000001
      .107000001
      .114
      .120999999
      ...
      .289000005
      .296000004
      .303000003
     LAST =   .310000002
      .310000002 .LE.   .310000002!!

   Note that one of the two checks in the program turned up an apparent
violation of the programmer's expectation--yet, the loop is correctly
implemented by `g77', in that it has 30 iterations.  This trip count of
30 is correct when evaluated using the floating-point representations
for the BEGIN, END, and INCR values (.1, .31, .007) on GNU/Linux ix86
are used.  On other systems, an apparently more accurate trip count of
31 might result, but, nevertheless, `g77' is faithfully following the
Fortran standard, and the result is not what the author of the sample
program above apparently expected.  (Such other systems might, for
different values in the `DATA' statement, violate the other
programmer's expectation, for example.)

   Due to this combination of imprecise representation of
floating-point values and the often-misunderstood interpretation of
`DO' by standard-conforming compilers such as `g77', use of `DO' loops
with `REAL' iteration variables is not recommended.  Such use can be
caught by specifying `-Wsurprising'.  *Note Warning Options::, for more
information on this option.


File: g77,  Node: Working Programs,  Next: Overly Convenient Options,  Prev: Loops,  Up: Collected Fortran Wisdom

17.4 Working Programs
=====================

   Getting Fortran programs to work in the first place can be quite a
challenge--even when the programs already work on other systems, or
when using other compilers.

   `g77' offers some facilities that might be useful for tracking down
bugs in such programs.

* Menu:

* Not My Type::
* Variables Assumed To Be Zero::
* Variables Assumed To Be Saved::
* Unwanted Variables::
* Unused Arguments::
* Surprising Interpretations of Code::
* Aliasing Assumed To Work::
* Output Assumed To Flush::
* Large File Unit Numbers::
* Floating-point precision::
* Inconsistent Calling Sequences::


File: g77,  Node: Not My Type,  Next: Variables Assumed To Be Zero,  Up: Working Programs

17.4.1 Not My Type
------------------

   A fruitful source of bugs in Fortran source code is use, or mis-use,
of Fortran's implicit-typing feature, whereby the type of a variable,
array, or function is determined by the first character of its name.

   Simple cases of this include statements like `LOGX=9.227', without a
statement such as `REAL LOGX'.  In this case, `LOGX' is implicitly
given `INTEGER(KIND=1)' type, with the result of the assignment being
that it is given the value `9'.

   More involved cases include a function that is defined starting with
a statement like `DOUBLE PRECISION FUNCTION IPS(...)'.  Any caller of
this function that does not also declare `IPS' as type `DOUBLE
PRECISION' (or, in GNU Fortran, `REAL(KIND=2)') is likely to assume it
returns `INTEGER', or some other type, leading to invalid results or
even program crashes.

   The `-Wimplicit' option might catch failures to properly specify the
types of variables, arrays, and functions in the code.

   However, in code that makes heavy use of Fortran's implicit-typing
facility, this option might produce so many warnings about cases that
are working, it would be hard to find the one or two that represent
bugs.  This is why so many experienced Fortran programmers strongly
recommend widespread use of the `IMPLICIT NONE' statement, despite it
not being standard FORTRAN 77, to completely turn off implicit typing.
(`g77' supports `IMPLICIT NONE', as do almost all FORTRAN 77 compilers.)

   Note that `-Wimplicit' catches only implicit typing of _names_.  It
does not catch implicit typing of expressions such as `X**(2/3)'.  Such
expressions can be buggy as well--in fact, `X**(2/3)' is equivalent to
`X**0', due to the way Fortran expressions are given types and then
evaluated.  (In this particular case, the programmer probably wanted
`X**(2./3.)'.)


File: g77,  Node: Variables Assumed To Be Zero,  Next: Variables Assumed To Be Saved,  Prev: Not My Type,  Up: Working Programs

17.4.2 Variables Assumed To Be Zero
-----------------------------------

   Many Fortran programs were developed on systems that provided
automatic initialization of all, or some, variables and arrays to zero.
As a result, many of these programs depend, sometimes inadvertently, on
this behavior, though to do so violates the Fortran standards.

   You can ask `g77' for this behavior by specifying the
`-finit-local-zero' option when compiling Fortran code.  (You might
want to specify `-fno-automatic' as well, to avoid code-size inflation
for non-optimized compilations.)

   Note that a program that works better when compiled with the
`-finit-local-zero' option is almost certainly depending on a
particular system's, or compiler's, tendency to initialize some
variables to zero.  It might be worthwhile finding such cases and
fixing them, using techniques such as compiling with the `-O
-Wuninitialized' options using `g77'.


File: g77,  Node: Variables Assumed To Be Saved,  Next: Unwanted Variables,  Prev: Variables Assumed To Be Zero,  Up: Working Programs

17.4.3 Variables Assumed To Be Saved
------------------------------------

   Many Fortran programs were developed on systems that saved the
values of all, or some, variables and arrays across procedure calls.
As a result, many of these programs depend, sometimes inadvertently, on
being able to assign a value to a variable, perform a `RETURN' to a
calling procedure, and, upon subsequent invocation, reference the
previously assigned variable to obtain the value.

   They expect this despite not using the `SAVE' statement to specify
that the value in a variable is expected to survive procedure returns
and calls.  Depending on variables and arrays to retain values across
procedure calls without using `SAVE' to require it violates the Fortran
standards.

   You can ask `g77' to assume `SAVE' is specified for all relevant
(local) variables and arrays by using the `-fno-automatic' option.

   Note that a program that works better when compiled with the
`-fno-automatic' option is almost certainly depending on not having to
use the `SAVE' statement as required by the Fortran standard.  It might
be worthwhile finding such cases and fixing them, using techniques such
as compiling with the `-O -Wuninitialized' options using `g77'.


File: g77,  Node: Unwanted Variables,  Next: Unused Arguments,  Prev: Variables Assumed To Be Saved,  Up: Working Programs

17.4.4 Unwanted Variables
-------------------------

   The `-Wunused' option can find bugs involving implicit typing,
sometimes more easily than using `-Wimplicit' in code that makes heavy
use of implicit typing.  An unused variable or array might indicate
that the spelling for its declaration is different from that of its
intended uses.

   Other than cases involving typos, unused variables rarely indicate
actual bugs in a program.  However, investigating such cases thoroughly
has, on occasion, led to the discovery of code that had not been
completely written--where the programmer wrote declarations as needed
for the whole algorithm, wrote some or even most of the code for that
algorithm, then got distracted and forgot that the job was not complete.


File: g77,  Node: Unused Arguments,  Next: Surprising Interpretations of Code,  Prev: Unwanted Variables,  Up: Working Programs

17.4.5 Unused Arguments
-----------------------

   As with unused variables, It is possible that unused arguments to a
procedure might indicate a bug.  Compile with `-W -Wunused' option to
catch cases of unused arguments.

   Note that `-W' also enables warnings regarding overflow of
floating-point constants under certain circumstances.


File: g77,  Node: Surprising Interpretations of Code,  Next: Aliasing Assumed To Work,  Prev: Unused Arguments,  Up: Working Programs

17.4.6 Surprising Interpretations of Code
-----------------------------------------

   The `-Wsurprising' option can help find bugs involving expression
evaluation or in the way `DO' loops with non-integral iteration
variables are handled.  Cases found by this option might indicate a
difference of interpretation between the author of the code involved,
and a standard-conforming compiler such as `g77'.  Such a difference
might produce actual bugs.

   In any case, changing the code to explicitly do what the programmer
might have expected it to do, so `g77' and other compilers are more
likely to follow the programmer's expectations, might be worthwhile,
especially if such changes make the program work better.


File: g77,  Node: Aliasing Assumed To Work,  Next: Output Assumed To Flush,  Prev: Surprising Interpretations of Code,  Up: Working Programs

17.4.7 Aliasing Assumed To Work
-------------------------------

   The `-falias-check', `-fargument-alias', `-fargument-noalias', and
`-fno-argument-noalias-global' options, introduced in version 0.5.20 and
`g77''s version 2.7.2.2.f.2 of `gcc', were withdrawn as of `g77'
version 0.5.23 due to their not being supported by `gcc' version 2.8.

   These options, which control the assumptions regarding aliasing
(overlapping) of writes and reads to main memory (core) made by the
`gcc' back end, might well be added back (in some form) in a future
version of `gcc'.

   However, these options _are_ supported by `egcs'.

   The information below still is useful, but applies to only those
versions of `g77' that support the alias analysis implied by support
for these options.

   These options are effective only when compiling with `-O'
(specifying any level other than `-O0') or with `-falias-check'.

   The default for Fortran code is `-fargument-noalias-global'.  (The
default for C code and code written in other C-based languages is
`-fargument-alias'.  These defaults apply regardless of whether you use
`g77' or `gcc' to compile your code.)

   Note that, on some systems, compiling with `-fforce-addr' in effect
can produce more optimal code when the default aliasing options are in
effect (and when optimization is enabled).

   If your program is not working when compiled with optimization, it
is possible it is violating the Fortran standards (77 and 90) by
relying on the ability to "safely" modify variables and arrays that are
aliased, via procedure calls, to other variables and arrays, without
using `EQUIVALENCE' to explicitly set up this kind of aliasing.

   (The FORTRAN 77 standard's prohibition of this sort of overlap,
generally referred to therein as "storage assocation", appears in
Sections 15.9.3.6.  This prohibition allows implementations, such as
`g77', to, for example, implement the passing of procedures and even
values in `COMMON' via copy operations into local, perhaps more
efficiently accessed temporaries at entry to a procedure, and, where
appropriate, via copy operations back out to their original locations
in memory at exit from that procedure, without having to take into
consideration the order in which the local copies are updated by the
code, among other things.)

   To test this hypothesis, try compiling your program with the
`-fargument-alias' option, which causes the compiler to revert to
assumptions essentially the same as made by versions of `g77' prior to
0.5.20.

   If the program works using this option, that strongly suggests that
the bug is in your program.  Finding and fixing the bug(s) should
result in a program that is more standard-conforming and that can be
compiled by `g77' in a way that results in a faster executable.

   (You might want to try compiling with `-fargument-noalias', a kind
of half-way point, to see if the problem is limited to aliasing between
dummy arguments and `COMMON' variables--this option assumes that such
aliasing is not done, while still allowing aliasing among dummy
arguments.)

   An example of aliasing that is invalid according to the standards is
shown in the following program, which might _not_ produce the expected
results when executed:

     I = 1
     CALL FOO(I, I)
     PRINT *, I
     END
     
     SUBROUTINE FOO(J, K)
     J = J + K
     K = J * K
     PRINT *, J, K
     END

   The above program attempts to use the temporary aliasing of the `J'
and `K' arguments in `FOO' to effect a pathological behavior--the
simultaneous changing of the values of _both_ `J' and `K' when either
one of them is written.

   The programmer likely expects the program to print these values:

     2  4
     4

   However, since the program is not standard-conforming, an
implementation's behavior when running it is undefined, because
subroutine `FOO' modifies at least one of the arguments, and they are
aliased with each other.  (Even if one of the assignment statements was
deleted, the program would still violate these rules.  This kind of
on-the-fly aliasing is permitted by the standard only when none of the
aliased items are defined, or written, while the aliasing is in effect.)

   As a practical example, an optimizing compiler might schedule the `J
=' part of the second line of `FOO' _after_ the reading of `J' and `K'
for the `J * K' expression, resulting in the following output:

     2  2
     2

   Essentially, compilers are promised (by the standard and, therefore,
by programmers who write code they claim to be standard-conforming)
that if they cannot detect aliasing via static analysis of a single
program unit's `EQUIVALENCE' and `COMMON' statements, no such aliasing
exists.  In such cases, compilers are free to assume that an assignment
to one variable will not change the value of another variable, allowing
it to avoid generating code to re-read the value of the other variable,
to re-schedule reads and writes, and so on, to produce a faster
executable.

   The same promise holds true for arrays (as seen by the called
procedure)--an element of one dummy array cannot be aliased with, or
overlap, any element of another dummy array or be in a `COMMON' area
known to the procedure.

   (These restrictions apply only when the procedure defines, or writes
to, one of the aliased variables or arrays.)

   Unfortunately, there is no way to find _all_ possible cases of
violations of the prohibitions against aliasing in Fortran code.
Static analysis is certainly imperfect, as is run-time analysis, since
neither can catch all violations.  (Static analysis can catch all
likely violations, and some that might never actually happen, while
run-time analysis can catch only those violations that actually happen
during a particular run.  Neither approach can cope with programs
mixing Fortran code with routines written in other languages, however.)

   Currently, `g77' provides neither static nor run-time facilities to
detect any cases of this problem, although other products might.
Run-time facilities are more likely to be offered by future versions of
`g77', though patches improving `g77' so that it provides either form
of detection are welcome.


File: g77,  Node: Output Assumed To Flush,  Next: Large File Unit Numbers,  Prev: Aliasing Assumed To Work,  Up: Working Programs

17.4.8 Output Assumed To Flush
------------------------------

   For several versions prior to 0.5.20, `g77' configured its version
of the `libf2c' run-time library so that one of its configuration
macros, `ALWAYS_FLUSH', was defined.

   This was done as a result of a belief that many programs expected
output to be flushed to the operating system (under UNIX, via the
`fflush()' library call) with the result that errors, such as disk
full, would be immediately flagged via the relevant `ERR=' and
`IOSTAT=' mechanism.

   Because of the adverse effects this approach had on the performance
of many programs, `g77' no longer configures `libf2c' (now named
`libg2c' in its `g77' incarnation) to always flush output.

   If your program depends on this behavior, either insert the
appropriate `CALL FLUSH' statements, or modify the sources to the
`libg2c', rebuild and reinstall `g77', and relink your programs with
the modified library.

   (Ideally, `libg2c' would offer the choice at run-time, so that a
compile-time option to `g77' or `f2c' could result in generating the
appropriate calls to flushing or non-flushing library routines.)

   *Note Always Flush Output::, for information on how to modify the
`g77' source tree so that a version of `libg2c' can be built and
installed with the `ALWAYS_FLUSH' macro defined.


File: g77,  Node: Large File Unit Numbers,  Next: Floating-point precision,  Prev: Output Assumed To Flush,  Up: Working Programs

17.4.9 Large File Unit Numbers
------------------------------

   If your program crashes at run time with a message including the
text `illegal unit number', that probably is a message from the
run-time library, `libg2c'.

   The message means that your program has attempted to use a file unit
number that is out of the range accepted by `libg2c'.  Normally, this
range is 0 through 99, and the high end of the range is controlled by a
`libg2c' source-file macro named `MXUNIT'.

   If you can easily change your program to use unit numbers in the
range 0 through 99, you should do so.

   Otherwise, see *Note Larger File Unit Numbers::, for information on
how to change `MXUNIT' in `libg2c' so you can build and install a new
version of `libg2c' that supports the larger unit numbers you need.

   _Note:_ While `libg2c' places a limit on the range of Fortran
file-unit numbers, the underlying library and operating system might
impose different kinds of limits.  For example, some systems limit the
number of files simultaneously open by a running program.  Information
on how to increase these limits should be found in your system's
documentation.


File: g77,  Node: Floating-point precision,  Next: Inconsistent Calling Sequences,  Prev: Large File Unit Numbers,  Up: Working Programs

17.4.10 Floating-point precision
--------------------------------

   If your program depends on exact IEEE 754 floating-point handling it
may help on some systems--specifically x86 or m68k hardware--to use the
`-ffloat-store' option or to reset the precision flag on the
floating-point unit.  *Note Optimize Options::.

   However, it might be better simply to put the FPU into double
precision mode and not take the performance hit of `-ffloat-store'.  On
x86 and m68k GNU systems you can do this with a technique similar to
that for turning on floating-point exceptions (*note Floating-point
Exception Handling::).  The control word could be set to double
precision by replacing the `__setfpucw' call with one like this:
       __setfpucw ((_FPU_DEFAULT & ~_FPU_EXTENDED) | _FPU_DOUBLE);
   (It is not clear whether this has any effect on the operation of the
GNU maths library, but we have no evidence of it causing trouble.)

   Some targets (such as the Alpha) may need special options for full
IEEE conformance.  *Note Hardware Models and Configurations:
(gcc)Submodel Options.


File: g77,  Node: Inconsistent Calling Sequences,  Prev: Floating-point precision,  Up: Working Programs

17.4.11 Inconsistent Calling Sequences
--------------------------------------

   Code containing inconsistent calling sequences in the same file is
normally rejected--see *Note GLOBALS::.  (Use, say, `ftnchek' to ensure
consistency across source files.  *Note Generating Skeletons and
Prototypes with `f2c': f2c Skeletons and Prototypes.)

   Mysterious errors, which may appear to be code generation problems,
can appear specifically on the x86 architecture with some such
inconsistencies.  On x86 hardware, floating-point return values of
functions are placed on the floating-point unit's register stack, not
the normal stack.  Thus calling a `REAL' or `DOUBLE PRECISION'
`FUNCTION' as some other sort of procedure, or vice versa, scrambles
the floating-point stack.  This may break unrelated code executed
later.  Similarly if, say, external C routines are written incorrectly.


File: g77,  Node: Overly Convenient Options,  Next: Faster Programs,  Prev: Working Programs,  Up: Collected Fortran Wisdom

17.5 Overly Convenient Command-line Options
===========================================

   These options should be used only as a quick-and-dirty way to
determine how well your program will run under different compilation
models without having to change the source.  Some are more problematic
than others, depending on how portable and maintainable you want the
program to be (and, of course, whether you are allowed to change it at
all is crucial).

   You should not continue to use these command-line options to compile
a given program, but rather should make changes to the source code:

`-finit-local-zero'
     (This option specifies that any uninitialized local variables and
     arrays have default initialization to binary zeros.)

     Many other compilers do this automatically, which means lots of
     Fortran code developed with those compilers depends on it.

     It is safer (and probably would produce a faster program) to find
     the variables and arrays that need such initialization and provide
     it explicitly via `DATA', so that `-finit-local-zero' is not
     needed.

     Consider using `-Wuninitialized' (which requires `-O') to find
     likely candidates, but do not specify `-finit-local-zero' or
     `-fno-automatic', or this technique won't work.

`-fno-automatic'
     (This option specifies that all local variables and arrays are to
     be treated as if they were named in `SAVE' statements.)

     Many other compilers do this automatically, which means lots of
     Fortran code developed with those compilers depends on it.

     The effect of this is that all non-automatic variables and arrays
     are made static, that is, not placed on the stack or in heap
     storage.  This might cause a buggy program to appear to work
     better.  If so, rather than relying on this command-line option
     (and hoping all compilers provide the equivalent one), add `SAVE'
     statements to some or all program unit sources, as appropriate.
     Consider using `-Wuninitialized' (which requires `-O') to find
     likely candidates, but do not specify `-finit-local-zero' or
     `-fno-automatic', or this technique won't work.

     The default is `-fautomatic', which tells `g77' to try and put
     variables and arrays on the stack (or in fast registers) where
     possible and reasonable.  This tends to make programs faster.

     _Note:_ Automatic variables and arrays are not affected by this
     option.  These are variables and arrays that are _necessarily_
     automatic, either due to explicit statements, or due to the way
     they are declared.  Examples include local variables and arrays
     not given the `SAVE' attribute in procedures declared `RECURSIVE',
     and local arrays declared with non-constant bounds (automatic
     arrays).  Currently, `g77' supports only automatic arrays, not
     `RECURSIVE' procedures or other means of explicitly specifying
     that variables or arrays are automatic.

`-fGROUP-intrinsics-hide'
     Change the source code to use `EXTERNAL' for any external procedure
     that might be the name of an intrinsic.  It is easy to find these
     using `-fGROUP-intrinsics-disable'.


File: g77,  Node: Faster Programs,  Prev: Overly Convenient Options,  Up: Collected Fortran Wisdom

17.6 Faster Programs
====================

   Aside from the usual `gcc' options, such as `-O', `-ffast-math', and
so on, consider trying some of the following approaches to speed up
your program (once you get it working).

* Menu:

* Aligned Data::
* Prefer Automatic Uninitialized Variables::
* Avoid f2c Compatibility::
* Use Submodel Options::


File: g77,  Node: Aligned Data,  Next: Prefer Automatic Uninitialized Variables,  Up: Faster Programs

17.6.1 Aligned Data
-------------------

   On some systems, such as those with Pentium Pro CPUs, programs that
make heavy use of `REAL(KIND=2)' (`DOUBLE PRECISION') might run much
slower than possible due to the compiler not aligning these 64-bit
values to 64-bit boundaries in memory.  (The effect also is present,
though to a lesser extent, on the 586 (Pentium) architecture.)

   The Intel x86 architecture generally ensures that these programs will
work on all its implementations, but particular implementations (such
as Pentium Pro) perform better with more strict alignment.  (Such
behavior isn't unique to the Intel x86 architecture.)  Other
architectures might _demand_ 64-bit alignment of 64-bit data.

   There are a variety of approaches to use to address this problem:

   * Order your `COMMON' and `EQUIVALENCE' areas such that the
     variables and arrays with the widest alignment guidelines come
     first.

     For example, on most systems, this would mean placing
     `COMPLEX(KIND=2)', `REAL(KIND=2)', and `INTEGER(KIND=2)' entities
     first, followed by `REAL(KIND=1)', `INTEGER(KIND=1)', and
     `LOGICAL(KIND=1)' entities, then `INTEGER(KIND=6)' entities, and
     finally `CHARACTER' and `INTEGER(KIND=3)' entities.

     The reason to use such placement is it makes it more likely that
     your data will be aligned properly, without requiring you to do
     detailed analysis of each aggregate (`COMMON' and `EQUIVALENCE')
     area.

     Specifically, on systems where the above guidelines are
     appropriate, placing `CHARACTER' entities before `REAL(KIND=2)'
     entities can work just as well, but only if the number of bytes
     occupied by the `CHARACTER' entities is divisible by the
     recommended alignment for `REAL(KIND=2)'.

     By ordering the placement of entities in aggregate areas according
     to the simple guidelines above, you avoid having to carefully
     count the number of bytes occupied by each entity to determine
     whether the actual alignment of each subsequent entity meets the
     alignment guidelines for the type of that entity.

     If you don't ensure correct alignment of `COMMON' elements, the
     compiler may be forced by some systems to violate the Fortran
     semantics by adding padding to get `DOUBLE PRECISION' data
     properly aligned.  If the unfortunate practice is employed of
     overlaying different types of data in the `COMMON' block, the
     different variants of this block may become misaligned with
     respect to each other.  Even if your platform doesn't require
     strict alignment, `COMMON' should be laid out as above for
     portability.  (Unfortunately the FORTRAN 77 standard didn't
     anticipate this possible requirement, which is
     compiler-independent on a given platform.)

   * Use the (x86-specific) `-malign-double' option when compiling
     programs for the Pentium and Pentium Pro architectures (called 586
     and 686 in the `gcc' configuration subsystem).  The warning about
     this in the `gcc' manual isn't generally relevant to Fortran, but
     using it will force `COMMON' to be padded if necessary to align
     `DOUBLE PRECISION' data.

     When `DOUBLE PRECISION' data is forcibly aligned in `COMMON' by
     `g77' due to specifying `-malign-double', `g77' issues a warning
     about the need to insert padding.

     In this case, each and every program unit that uses the same
     `COMMON' area must specify the same layout of variables and their
     types for that area and be compiled with `-malign-double' as well.
     `g77' will issue warnings in each case, but as long as every
     program unit using that area is compiled with the same warnings,
     the resulting object files should work when linked together unless
     the program makes additional assumptions about `COMMON' area
     layouts that are outside the scope of the FORTRAN 77 standard, or
     uses `EQUIVALENCE' or different layouts in ways that assume no
     padding is ever inserted by the compiler.

   * Ensure that `crt0.o' or `crt1.o' on your system guarantees a 64-bit
     aligned stack for `main()'.  The recent one from GNU (`glibc2')
     will do this on x86 systems, but we don't know of any other x86
     setups where it will be right.  Read your system's documentation
     to determine if it is appropriate to upgrade to a more recent
     version to obtain the optimal alignment.

   Progress is being made on making this work "out of the box" on
future versions of `g77', `gcc', and some of the relevant operating
systems (such as GNU/Linux).

   A package that tests the degree to which a Fortran compiler (such as
`g77') aligns 64-bit floating-point variables and arrays is available
at `ftp://alpha.gnu.org/gnu/g77/align/'.


File: g77,  Node: Prefer Automatic Uninitialized Variables,  Next: Avoid f2c Compatibility,  Prev: Aligned Data,  Up: Faster Programs

17.6.2 Prefer Automatic Uninitialized Variables
-----------------------------------------------

   If you're using `-fno-automatic' already, you probably should change
your code to allow compilation with `-fautomatic' (the default), to
allow the program to run faster.

   Similarly, you should be able to use `-fno-init-local-zero' (the
default) instead of `-finit-local-zero'.  This is because it is rare
that every variable affected by these options in a given program
actually needs to be so affected.

   For example, `-fno-automatic', which effectively `SAVE's every local
non-automatic variable and array, affects even things like `DO'
iteration variables, which rarely need to be `SAVE'd, and this often
reduces run-time performances.  Similarly, `-fno-init-local-zero'
forces such variables to be initialized to zero--when `SAVE'd (such as
when `-fno-automatic'), this by itself generally affects only startup
time for a program, but when not `SAVE'd, it can slow down the
procedure every time it is called.

   *Note Overly Convenient Command-Line Options: Overly Convenient
Options, for information on the `-fno-automatic' and
`-finit-local-zero' options and how to convert their use into selective
changes in your own code.


File: g77,  Node: Avoid f2c Compatibility,  Next: Use Submodel Options,  Prev: Prefer Automatic Uninitialized Variables,  Up: Faster Programs

17.6.3 Avoid f2c Compatibility
------------------------------

   If you aren't linking with any code compiled using `f2c', try using
the `-fno-f2c' option when compiling _all_ the code in your program.
(Note that `libf2c' is _not_ an example of code that is compiled using
`f2c'--it is compiled by a C compiler, typically `gcc'.)


File: g77,  Node: Use Submodel Options,  Prev: Avoid f2c Compatibility,  Up: Faster Programs

17.6.4 Use Submodel Options
---------------------------

   Using an appropriate `-m' option to generate specific code for your
CPU may be worthwhile, though it may mean the executable won't run on
other versions of the CPU that don't support the same instruction set.
*Note Hardware Models and Configurations: (gcc)Submodel Options.  For
instance on an x86 system the compiler might have been built--as shown
by `g77 -v'--for the target `i386-pc-linux-gnu', i.e. an `i386' CPU.
In that case to generate code best optimized for a Pentium you could
use the option `-march=pentium'.

   For recent CPUs that don't have explicit support in the released
version of `gcc', it _might_ still be possible to get improvements with
certain `-m' options.

   `-fomit-frame-pointer' can help performance on x86 systems and
others.  It will, however, inhibit debugging on the systems on which it
is not turned on anyway by `-O'.


File: g77,  Node: Trouble,  Next: Open Questions,  Prev: Collected Fortran Wisdom,  Up: Top

18 Known Causes of Trouble with GNU Fortran
*******************************************

   This section describes known problems that affect users of GNU
Fortran.  Most of these are not GNU Fortran bugs per se--if they were,
we would fix them.  But the result for a user might be like the result
of a bug.

   Some of these problems are due to bugs in other software, some are
missing features that are too much work to add, and some are places
where people's opinions differ as to what is best.

   Information on bugs that show up when configuring, porting, building,
or installing `g77' is not provided here.  *Note Problems Installing::.

   To find out about major bugs discovered in the current release and
possible workarounds for them, see `ftp://alpha.gnu.org/g77.plan'.

   (Note that some of this portion of the manual is lifted directly
from the `gcc' manual, with minor modifications to tailor it to users
of `g77'.  Anytime a bug seems to have more to do with the `gcc'
portion of `g77', see *Note Known Causes of Trouble with GNU CC:
(gcc)Trouble.)

* Menu:

* But-bugs::         Bugs really in other programs or elsewhere.
* Known Bugs::       Bugs known to be in this version of `g77'.
* Missing Features:: Features we already know we want to add later.
* Disappointments::  Regrettable things we can't change.
* Non-bugs::         Things we think are right, but some others disagree.
* Warnings and Errors::  Which problems in your code get warnings,
                        and which get errors.


File: g77,  Node: But-bugs,  Next: Known Bugs,  Up: Trouble

18.1 Bugs Not In GNU Fortran
============================

   These are bugs to which the maintainers often have to reply, "but
that isn't a bug in `g77'...".  Some of these already are fixed in new
versions of other software; some still need to be fixed; some are
problems with how `g77' is installed or is being used; some are the
result of bad hardware that causes software to misbehave in sometimes
bizarre ways; some just cannot be addressed at this time until more is
known about the problem.

   Please don't re-report these bugs to the `g77' maintainers--if you
must remind someone how important it is to you that the problem be
fixed, talk to the people responsible for the other products identified
below, but preferably only after you've tried the latest versions of
those products.  The `g77' maintainers have their hands full working on
just fixing and improving `g77', without serving as a clearinghouse for
all bugs that happen to affect `g77' users.

   *Note Collected Fortran Wisdom::, for information on behavior of
Fortran programs, and the programs that compile them, that might be
_thought_ to indicate bugs.

* Menu:

* Signal 11 and Friends::  Strange behavior by any software.
* Cannot Link Fortran Programs::  Unresolved references.
* Large Common Blocks::    Problems on older GNU/Linux systems.
* Debugger Problems::      When the debugger crashes.
* NeXTStep Problems::      Misbehaving executables.
* Stack Overflow::         More misbehaving executables.
* Nothing Happens::        Less behaving executables.
* Strange Behavior at Run Time::  Executables misbehaving due to
                            bugs in your program.
* Floating-point Errors::  The results look wrong, but....


File: g77,  Node: Signal 11 and Friends,  Next: Cannot Link Fortran Programs,  Up: But-bugs

18.1.1 Signal 11 and Friends
----------------------------

   A whole variety of strange behaviors can occur when the software, or
the way you are using the software, stresses the hardware in a way that
triggers hardware bugs.  This might seem hard to believe, but it
happens frequently enough that there exist documents explaining in
detail what the various causes of the problems are, what typical
symptoms look like, and so on.

   Generally these problems are referred to in this document as "signal
11" crashes, because the Linux kernel, running on the most popular
hardware (the Intel x86 line), often stresses the hardware more than
other popular operating systems.  When hardware problems do occur under
GNU/Linux on x86 systems, these often manifest themselves as "signal 11"
problems, as illustrated by the following diagnostic:

     sh# g77 myprog.f
     gcc: Internal compiler error: program f771 got fatal signal 11
     sh#

   It is _very_ important to remember that the above message is _not_
the only one that indicates a hardware problem, nor does it always
indicate a hardware problem.

   In particular, on systems other than those running the Linux kernel,
the message might appear somewhat or very different, as it will if the
error manifests itself while running a program other than the `g77'
compiler.  For example, it will appear somewhat different when running
your program, when running Emacs, and so on.

   How to cope with such problems is well beyond the scope of this
manual.

   However, users of Linux-based systems (such as GNU/Linux) should
review `http://www.bitwizard.nl/sig11/', a source of detailed
information on diagnosing hardware problems, by recognizing their
common symptoms.

   Users of other operating systems and hardware might find this
reference useful as well.  If you know of similar material for another
hardware/software combination, please let us know so we can consider
including a reference to it in future versions of this manual.


File: g77,  Node: Cannot Link Fortran Programs,  Next: Large Common Blocks,  Prev: Signal 11 and Friends,  Up: But-bugs

18.1.2 Cannot Link Fortran Programs
-----------------------------------

   On some systems, perhaps just those with out-of-date (shared?)
libraries, unresolved-reference errors happen when linking
`g77'-compiled programs (which should be done using `g77').

   If this happens to you, try appending `-lc' to the command you use
to link the program, e.g. `g77 foo.f -lc'.  `g77' already specifies
`-lg2c -lm' when it calls the linker, but it cannot also specify `-lc'
because not all systems have a file named `libc.a'.

   It is unclear at this point whether there are legitimately installed
systems where `-lg2c -lm' is insufficient to resolve code produced by
`g77'.

   If your program doesn't link due to unresolved references to names
like `_main', make sure you're using the `g77' command to do the link,
since this command ensures that the necessary libraries are loaded by
specifying `-lg2c -lm' when it invokes the `gcc' command to do the
actual link.  (Use the `-v' option to discover more about what actually
happens when you use the `g77' and `gcc' commands.)

   Also, try specifying `-lc' as the last item on the `g77' command
line, in case that helps.


File: g77,  Node: Large Common Blocks,  Next: Debugger Problems,  Prev: Cannot Link Fortran Programs,  Up: But-bugs

18.1.3 Large Common Blocks
--------------------------

   On some older GNU/Linux systems, programs with common blocks larger
than 16MB cannot be linked without some kind of error message being
produced.

   This is a bug in older versions of `ld', fixed in more recent
versions of `binutils', such as version 2.6.


File: g77,  Node: Debugger Problems,  Next: NeXTStep Problems,  Prev: Large Common Blocks,  Up: But-bugs

18.1.4 Debugger Problems
------------------------

   There are some known problems when using `gdb' on code compiled by
`g77'.  Inadequate investigation as of the release of 0.5.16 results in
not knowing which products are the culprit, but `gdb-4.14' definitely
crashes when, for example, an attempt is made to print the contents of
a `COMPLEX(KIND=2)' dummy array, on at least some GNU/Linux machines,
plus some others.  Attempts to access assumed-size arrays are also
known to crash recent versions of `gdb'.  (`gdb''s Fortran support was
done for a different compiler and isn't properly compatible with `g77'.)


File: g77,  Node: NeXTStep Problems,  Next: Stack Overflow,  Prev: Debugger Problems,  Up: But-bugs

18.1.5 NeXTStep Problems
------------------------

   Developers of Fortran code on NeXTStep (all architectures) have to
watch out for the following problem when writing programs with large,
statically allocated (i.e. non-stack based) data structures (common
blocks, saved arrays).

   Due to the way the native loader (`/bin/ld') lays out data
structures in virtual memory, it is very easy to create an executable
wherein the `__DATA' segment overlaps (has addresses in common) with
the `UNIX STACK' segment.

   This leads to all sorts of trouble, from the executable simply not
executing, to bus errors.  The NeXTStep command line tool `ebadexec'
points to the problem as follows:

     % /bin/ebadexec a.out
     /bin/ebadexec: __LINKEDIT segment (truncated address = 0x3de000
     rounded size = 0x2a000) of executable file: a.out overlaps with UNIX
     STACK segment (truncated address = 0x400000 rounded size =
     0x3c00000) of executable file: a.out

   (In the above case, it is the `__LINKEDIT' segment that overlaps the
stack segment.)

   This can be cured by assigning the `__DATA' segment (virtual)
addresses beyond the stack segment.  A conservative estimate for this
is from address 6000000 (hexadecimal) onwards--this has always worked
for me [Toon Moene]:

     % g77 -segaddr __DATA 6000000 test.f
     % ebadexec a.out
     ebadexec: file: a.out appears to be executable
     %

   Browsing through `egcs/gcc/f/Makefile.in', you will find that the
`f771' program itself also has to be linked with these flags--it has
large statically allocated data structures.  (Version 0.5.18 reduces
this somewhat, but probably not enough.)

   (The above item was contributed by Toon Moene
(<toon@moene.indiv.nluug.nl>).)


File: g77,  Node: Stack Overflow,  Next: Nothing Happens,  Prev: NeXTStep Problems,  Up: But-bugs

18.1.6 Stack Overflow
---------------------

   `g77' code might fail at runtime (probably with a "segmentation
violation") due to overflowing the stack.  This happens most often on
systems with an environment that provides substantially more heap space
(for use when arbitrarily allocating and freeing memory) than stack
space.

   Often this can be cured by increasing or removing your shell's limit
on stack usage, typically using `limit stacksize' (in `csh' and
derivatives) or `ulimit -s' (in `sh' and derivatives).

   Increasing the allowed stack size might, however, require changing
some operating system or system configuration parameters.

   You might be able to work around the problem by compiling with the
`-fno-automatic' option to reduce stack usage, probably at the expense
of speed.

   *Note Maximum Stackable Size::, for information on patching `g77' to
use different criteria for placing local non-automatic variables and
arrays on the stack.

   However, if your program uses large automatic arrays (for example,
has declarations like `REAL A(N)' where `A' is a local array and `N' is
a dummy or `COMMON' variable that can have a large value), neither use
of `-fno-automatic', nor changing the cut-off point for `g77' for using
the stack, will solve the problem by changing the placement of these
large arrays, as they are _necessarily_ automatic.

   `g77' currently provides no means to specify that automatic arrays
are to be allocated on the heap instead of the stack.  So, other than
increasing the stack size, your best bet is to change your source code
to avoid large automatic arrays.  Methods for doing this currently are
outside the scope of this document.

   (_Note:_ If your system puts stack and heap space in the same memory
area, such that they are effectively combined, then a stack overflow
probably indicates a program that is either simply too large for the
system, or buggy.)


File: g77,  Node: Nothing Happens,  Next: Strange Behavior at Run Time,  Prev: Stack Overflow,  Up: But-bugs

18.1.7 Nothing Happens
----------------------

   It is occasionally reported that a "simple" program, such as a
"Hello, World!" program, does nothing when it is run, even though the
compiler reported no errors, despite the program containing nothing
other than a simple `PRINT' statement.

   This most often happens because the program has been compiled and
linked on a UNIX system and named `test', though other names can lead
to similarly unexpected run-time behavior on various systems.

   Essentially this problem boils down to giving your program a name
that is already known to the shell you are using to identify some other
program, which the shell continues to execute instead of your program
when you invoke it via, for example:

     sh# test
     sh#

   Under UNIX and many other system, a simple command name invokes a
searching mechanism that might well not choose the program located in
the current working directory if there is another alternative (such as
the `test' command commonly installed on UNIX systems).

   The reliable way to invoke a program you just linked in the current
directory under UNIX is to specify it using an explicit pathname, as in:

     sh# ./test
      Hello, World!
     sh#

   Users who encounter this problem should take the time to read up on
how their shell searches for commands, how to set their search path,
and so on.  The relevant UNIX commands to learn about include `man',
`info' (on GNU systems), `setenv' (or `set' and `env'), `which', and
`find'.


File: g77,  Node: Strange Behavior at Run Time,  Next: Floating-point Errors,  Prev: Nothing Happens,  Up: But-bugs

18.1.8 Strange Behavior at Run Time
-----------------------------------

   `g77' code might fail at runtime with "segmentation violation", "bus
error", or even something as subtle as a procedure call overwriting a
variable or array element that it is not supposed to touch.

   These can be symptoms of a wide variety of actual bugs that occurred
earlier during the program's run, but manifested themselves as
_visible_ problems some time later.

   Overflowing the bounds of an array--usually by writing beyond the
end of it--is one of two kinds of bug that often occurs in Fortran code.
(Compile your code with the `-fbounds-check' option to catch many of
these kinds of errors at program run time.)

   The other kind of bug is a mismatch between the actual arguments
passed to a procedure and the dummy arguments as declared by that
procedure.

   Both of these kinds of bugs, and some others as well, can be
difficult to track down, because the bug can change its behavior, or
even appear to not occur, when using a debugger.

   That is, these bugs can be quite sensitive to data, including data
representing the placement of other data in memory (that is, pointers,
such as the placement of stack frames in memory).

   `g77' now offers the ability to catch and report some of these
problems at compile, link, or run time, such as by generating code to
detect references to beyond the bounds of most arrays (except
assumed-size arrays), and checking for agreement between calling and
called procedures.  Future improvements are likely to be made in the
procedure-mismatch area, at least.

   In the meantime, finding and fixing the programming bugs that lead
to these behaviors is, ultimately, the user's responsibility, as
difficult as that task can sometimes be.

   One runtime problem that has been observed might have a simple
solution.  If a formatted `WRITE' produces an endless stream of spaces,
check that your program is linked against the correct version of the C
library.  The configuration process takes care to account for your
system's normal `libc' not being ANSI-standard, which will otherwise
cause this behaviour.  If your system's default library is
ANSI-standard and you subsequently link against a non-ANSI one, there
might be problems such as this one.

   Specifically, on Solaris2 systems, avoid picking up the `BSD'
library from `/usr/ucblib'.


File: g77,  Node: Floating-point Errors,  Prev: Strange Behavior at Run Time,  Up: But-bugs

18.1.9 Floating-point Errors
----------------------------

   Some programs appear to produce inconsistent floating-point results
compiled by `g77' versus by other compilers.

   Often the reason for this behavior is the fact that floating-point
values are represented on almost all Fortran systems by
_approximations_, and these approximations are inexact even for
apparently simple values like 0.1, 0.2, 0.3, 0.4, 0.6, 0.7, 0.8, 0.9,
1.1, and so on.  Most Fortran systems, including all current ports of
`g77', use binary arithmetic to represent these approximations.

   Therefore, the exact value of any floating-point approximation as
manipulated by `g77'-compiled code is representable by adding some
combination of the values 1.0, 0.5, 0.25, 0.125, and so on (just keep
dividing by two) through the precision of the fraction (typically
around 23 bits for `REAL(KIND=1)', 52 for `REAL(KIND=2)'), then
multiplying the sum by a integral power of two (in Fortran, by `2**N')
that typically is between -127 and +128 for `REAL(KIND=1)' and -1023
and +1024 for `REAL(KIND=2)', then multiplying by -1 if the number is
negative.

   So, a value like 0.2 is exactly represented in decimal--since it is
a fraction, `2/10', with a denominator that is compatible with the base
of the number system (base 10).  However, `2/10' cannot be represented
by any finite number of sums of any of 1.0, 0.5, 0.25, and so on, so
0.2 cannot be exactly represented in binary notation.

   (On the other hand, decimal notation can represent any binary number
in a finite number of digits.  Decimal notation cannot do so with
ternary, or base-3, notation, which would represent floating-point
numbers as sums of any of `1/1', `1/3', `1/9', and so on.  After all,
no finite number of decimal digits can exactly represent `1/3'.
Fortunately, few systems use ternary notation.)

   Moreover, differences in the way run-time I/O libraries convert
between these approximations and the decimal representation often used
by programmers and the programs they write can result in apparent
differences between results that do not actually exist, or exist to
such a small degree that they usually are not worth worrying about.

   For example, consider the following program:

     PRINT *, 0.2
     END

   When compiled by `g77', the above program might output `0.20000003',
while another compiler might produce a executable that outputs `0.2'.

   This particular difference is due to the fact that, currently,
conversion of floating-point values by the `libg2c' library, used by
`g77', handles only double-precision values.

   Since `0.2' in the program is a single-precision value, it is
converted to double precision (still in binary notation) before being
converted back to decimal.  The conversion to binary appends _binary_
zero digits to the original value--which, again, is an inexact
approximation of 0.2--resulting in an approximation that is much less
exact than is connoted by the use of double precision.

   (The appending of binary zero digits has essentially the same effect
as taking a particular decimal approximation of `1/3', such as
`0.3333333', and appending decimal zeros to it, producing
`0.33333330000000000'.  Treating the resulting decimal approximation as
if it really had 18 or so digits of valid precision would make it seem
a very poor approximation of `1/3'.)

   As a result of converting the single-precision approximation to
double precision by appending binary zeros, the conversion of the
resulting double-precision value to decimal produces what looks like an
incorrect result, when in fact the result is _inexact_, and is probably
no less inaccurate or imprecise an approximation of 0.2 than is
produced by other compilers that happen to output the converted value
as "exactly" `0.2'.  (Some compilers behave in a way that can make them
appear to retain more accuracy across a conversion of a single-precision
constant to double precision.  *Note Context-Sensitive Constants::, to
see why this practice is illusory and even dangerous.)

   Note that a more exact approximation of the constant is computed
when the program is changed to specify a double-precision constant:

     PRINT *, 0.2D0
     END

   Future versions of `g77' and/or `libg2c' might convert
single-precision values directly to decimal, instead of converting them
to double precision first.  This would tend to result in output that is
more consistent with that produced by some other Fortran
implementations.

   A useful source of information on floating-point computation is David
Goldberg, `What Every Computer Scientist Should Know About
Floating-Point Arithmetic', Computing Surveys, 23, March 1991, pp.
5-48.  An online version is available at `http://docs.sun.com/', and
there is a supplemented version, in PostScript form, at
`http://www.validgh.com/goldberg/paper.ps'.

   Information related to the IEEE 754 floating-point standard by a
leading light can be found at
`http://http.cs.berkeley.edu/%7Ewkahan/ieee754status/'; see also slides
from the short course referenced from
`http://http.cs.berkeley.edu/%7Efateman/'.
`http://www.linuxsupportline.com/%7Ebillm/' has a brief guide to IEEE
754, a somewhat x86-GNU/Linux-specific FAQ, and library code for
GNU/Linux x86 systems.

   The supplement to the PostScript-formatted Goldberg document,
referenced above, is available in HTML format.  See `Differences Among
IEEE 754 Implementations' by Doug Priest, available online at
`http://www.validgh.com/goldberg/addendum.html'.  This document
explores some of the issues surrounding computing of extended (80-bit)
results on processors such as the x86, especially when those results
are arbitrarily truncated to 32-bit or 64-bit values by the compiler as
"spills".

   (_Note:_ `g77' specifically, and `gcc' generally, does arbitrarily
truncate 80-bit results during spills as of this writing.  It is not
yet clear whether a future version of the GNU compiler suite will offer
80-bit spills as an option, or perhaps even as the default behavior.)

   The GNU C library provides routines for controlling the FPU, and
other documentation about this.

   *Note Floating-point precision::, regarding IEEE 754 conformance.


File: g77,  Node: Known Bugs,  Next: Missing Features,  Prev: But-bugs,  Up: Trouble

18.2 Known Bugs In GNU Fortran
==============================

   This section identifies bugs that `g77' _users_ might run into in
the GCC-2.95 version of `g77'.  This includes bugs that are actually in
the `gcc' back end (GBE) or in `libf2c', because those sets of code are
at least somewhat under the control of (and necessarily intertwined
with) `g77', so it isn't worth separating them out.

   For information on bugs in _other_ versions of `g77', see *Note News
About GNU Fortran: News.  There, lists of bugs fixed in various
versions of `g77' can help determine what bugs existed in prior
versions.

   An online, "live" version of this document (derived directly from
the mainline, development version of `g77' within `egcs') is available
via `http://www.gnu.org/software/gcc/onlinedocs/g77_bugs.html'.  Follow
the "Known Bugs" link.

   For information on bugs that might afflict people who configure,
port, build, and install `g77', see *Note Problems Installing::.

   The following information was last updated on 1999-06-29:

   * `g77' fails to warn about use of a "live" iterative-DO variable as
     an implied-DO variable in a `WRITE' or `PRINT' statement (although
     it does warn about this in a `READ' statement).

   * Something about `g77''s straightforward handling of label
     references and definitions sometimes prevents the GBE from
     unrolling loops.  Until this is solved, try inserting or removing
     `CONTINUE' statements as the terminal statement, using the `END DO'
     form instead, and so on.

   * Some confusion in diagnostics concerning failing `INCLUDE'
     statements from within `INCLUDE''d or `#include''d files.

   * `g77' assumes that `INTEGER(KIND=1)' constants range from `-2**31'
     to `2**31-1' (the range for two's-complement 32-bit values),
     instead of determining their range from the actual range of the
     type for the configuration (and, someday, for the constant).

     Further, it generally doesn't implement the handling of constants
     very well in that it makes assumptions about the configuration
     that it no longer makes regarding variables (types).

     Included with this item is the fact that `g77' doesn't recognize
     that, on IEEE-754/854-compliant systems, `0./0.' should produce a
     NaN and no warning instead of the value `0.' and a warning.  This
     is to be fixed in version 0.6, when `g77' will use the `gcc' back
     end's constant-handling mechanisms to replace its own.

   * `g77' uses way too much memory and CPU time to process large
     aggregate areas having any initialized elements.

     For example, `REAL A(1000000)' followed by `DATA A(1)/1/' takes up
     way too much time and space, including the size of the generated
     assembler file.  This is to be mitigated somewhat in version 0.6.

     Version 0.5.18 improves cases like this--specifically, cases of
     _sparse_ initialization that leave large, contiguous areas
     uninitialized--significantly.  However, even with the
     improvements, these cases still require too much memory and CPU
     time.

     (Version 0.5.18 also improves cases where the initial values are
     zero to a much greater degree, so if the above example ends with
     `DATA A(1)/0/', the compile-time performance will be about as good
     as it will ever get, aside from unrelated improvements to the
     compiler.)

     Note that `g77' does display a warning message to notify the user
     before the compiler appears to hang.  *Note Initialization of
     Large Aggregate Areas: Large Initialization, for information on
     how to change the point at which `g77' decides to issue this
     warning.

   * `g77' doesn't emit variable and array members of common blocks for
     use with a debugger (the `-g' command-line option).  The code is
     present to do this, but doesn't work with at least one debug
     format--perhaps it works with others.  And it turns out there's a
     similar bug for local equivalence areas, so that has been disabled
     as well.

     As of Version 0.5.19, a temporary kludge solution is provided
     whereby some rudimentary information on a member is written as a
     string that is the member's value as a character string.

     *Note Options for Code Generation Conventions: Code Gen Options,
     for information on the `-fdebug-kludge' option.

   * When debugging, after starting up the debugger but before being
     able to see the source code for the main program unit, the user
     must currently set a breakpoint at `MAIN__' (or `MAIN___' or
     `MAIN_' if `MAIN__' doesn't exist) and run the program until it
     hits the breakpoint.  At that point, the main program unit is
     activated and about to execute its first executable statement, but
     that's the state in which the debugger should start up, as is the
     case for languages like C.

   * Debugging `g77'-compiled code using debuggers other than `gdb' is
     likely not to work.

     Getting `g77' and `gdb' to work together is a known
     problem--getting `g77' to work properly with other debuggers, for
     which source code often is unavailable to `g77' developers, seems
     like a much larger, unknown problem, and is a lower priority than
     making `g77' and `gdb' work together properly.

     On the other hand, information about problems other debuggers have
     with `g77' output might make it easier to properly fix `g77', and
     perhaps even improve `gdb', so it is definitely welcome.  Such
     information might even lead to all relevant products working
     together properly sooner.

   * `g77' doesn't work perfectly on 64-bit configurations such as the
     Digital Semiconductor ("DEC") Alpha.

     This problem is largely resolved as of version 0.5.23.  Version
     0.6 should solve most or all remaining problems (such as
     cross-compiling involving 64-bit machines).

   * `g77' currently inserts needless padding for things like `COMMON
     A,IPAD' where `A' is `CHARACTER*1' and `IPAD' is `INTEGER(KIND=1)'
     on machines like x86, because the back end insists that `IPAD' be
     aligned to a 4-byte boundary, but the processor has no such
     requirement (though it is usually good for performance).

     The `gcc' back end needs to provide a wider array of
     specifications of alignment requirements and preferences for
     targets, and front ends like `g77' should take advantage of this
     when it becomes available.

   * The `libf2c' routines that perform some run-time arithmetic on
     `COMPLEX' operands were modified circa version 0.5.20 of `g77' to
     work properly even in the presence of aliased operands.

     While the `g77' and `netlib' versions of `libf2c' differ on how
     this is accomplished, the main differences are that we believe the
     `g77' version works properly even in the presence of _partially_
     aliased operands.

     However, these modifications have reduced performance on targets
     such as x86, due to the extra copies of operands involved.


File: g77,  Node: Missing Features,  Next: Disappointments,  Prev: Known Bugs,  Up: Trouble

18.3 Missing Features
=====================

   This section lists features we know are missing from `g77', and
which we want to add someday.  (There is no priority implied in the
ordering below.)

* Menu:

GNU Fortran language:
* Better Source Model::
* Fortran 90 Support::
* Intrinsics in PARAMETER Statements::
* Arbitrary Concatenation::
* SELECT CASE on CHARACTER Type::
* RECURSIVE Keyword::
* Popular Non-standard Types::
* Full Support for Compiler Types::
* Array Bounds Expressions::
* POINTER Statements::
* Sensible Non-standard Constructs::
* READONLY Keyword::
* FLUSH Statement::
* Expressions in FORMAT Statements::
* Explicit Assembler Code::
* Q Edit Descriptor::

GNU Fortran dialects:
* Old-style PARAMETER Statements::
* TYPE and ACCEPT I/O Statements::
* STRUCTURE UNION RECORD MAP::
* OPEN CLOSE and INQUIRE Keywords::
* ENCODE and DECODE::
* AUTOMATIC Statement::
* Suppressing Space Padding::
* Fortran Preprocessor::
* Bit Operations on Floating-point Data::
* Really Ugly Character Assignments::

New facilities:
* POSIX Standard::
* Floating-point Exception Handling::
* Nonportable Conversions::
* Large Automatic Arrays::
* Support for Threads::
* Increasing Precision/Range::
* Enabling Debug Lines::

Better diagnostics:
* Better Warnings::
* Gracefully Handle Sensible Bad Code::
* Non-standard Conversions::
* Non-standard Intrinsics::
* Modifying DO Variable::
* Better Pedantic Compilation::
* Warn About Implicit Conversions::
* Invalid Use of Hollerith Constant::
* Dummy Array Without Dimensioning Dummy::
* Invalid FORMAT Specifiers::
* Ambiguous Dialects::
* Unused Labels::
* Informational Messages::

Run-time facilities:
* Uninitialized Variables at Run Time::
* Portable Unformatted Files::
* Better List-directed I/O::
* Default to Console I/O::

Debugging:
* Labels Visible to Debugger::


File: g77,  Node: Better Source Model,  Next: Fortran 90 Support,  Up: Missing Features

18.3.1 Better Source Model
--------------------------

   `g77' needs to provide, as the default source-line model, a "pure
visual" mode, where the interpretation of a source program in this mode
can be accurately determined by a user looking at a traditionally
displayed rendition of the program (assuming the user knows whether the
program is fixed or free form).

   The design should assume the user cannot tell tabs from spaces and
cannot see trailing spaces on lines, but has canonical tab stops and,
for fixed-form source, has the ability to always know exactly where
column 72 is (since the Fortran standard itself requires this for
fixed-form source).

   This would change the default treatment of fixed-form source to not
treat lines with tabs as if they were infinitely long--instead, they
would end at column 72 just as if the tabs were replaced by spaces in
the canonical way.

   As part of this, provide common alternate models (Digital, `f2c',
and so on) via command-line options.  This includes allowing
arbitrarily long lines for free-form source as well as fixed-form
source and providing various limits and diagnostics as appropriate.

   Also, `g77' should offer, perhaps even default to, warnings when
characters beyond the last valid column are anything other than spaces.
This would mean code with "sequence numbers" in columns 73 through 80
would be rejected, and there's a lot of that kind of code around, but
one of the most frequent bugs encountered by new users is accidentally
writing fixed-form source code into and beyond column 73.  So, maybe
the users of old code would be able to more easily handle having to
specify, say, a `-Wno-col73to80' option.


File: g77,  Node: Fortran 90 Support,  Next: Intrinsics in PARAMETER Statements,  Prev: Better Source Model,  Up: Missing Features

18.3.2 Fortran 90 Support
-------------------------

   `g77' does not support many of the features that distinguish Fortran
90 (and, now, Fortran 95) from ANSI FORTRAN 77.

   Some Fortran 90 features are supported, because they make sense to
offer even to die-hard users of F77.  For example, many of them codify
various ways F77 has been extended to meet users' needs during its
tenure, so `g77' might as well offer them as the primary way to meet
those same needs, even if it offers compatibility with one or more of
the ways those needs were met by other F77 compilers in the industry.

   Still, many important F90 features are not supported, because no
attempt has been made to research each and every feature and assess its
viability in `g77'.  In the meantime, users who need those features must
use Fortran 90 compilers anyway, and the best approach to adding some
F90 features to GNU Fortran might well be to fund a comprehensive
project to create GNU Fortran 95.


File: g77,  Node: Intrinsics in PARAMETER Statements,  Next: Arbitrary Concatenation,  Prev: Fortran 90 Support,  Up: Missing Features

18.3.3 Intrinsics in `PARAMETER' Statements
-------------------------------------------

   `g77' doesn't allow intrinsics in `PARAMETER' statements.  This
feature is considered to be absolutely vital, even though it is not
standard-conforming, and is scheduled for version 0.6.

   Related to this, `g77' doesn't allow non-integral exponentiation in
`PARAMETER' statements, such as `PARAMETER (R=2**.25)'.  It is unlikely
`g77' will ever support this feature, as doing it properly requires
complete emulation of a target computer's floating-point facilities when
building `g77' as a cross-compiler.  But, if the `gcc' back end is
enhanced to provide such a facility, `g77' will likely use that facility
in implementing this feature soon afterwards.


File: g77,  Node: Arbitrary Concatenation,  Next: SELECT CASE on CHARACTER Type,  Prev: Intrinsics in PARAMETER Statements,  Up: Missing Features

18.3.4 Arbitrary Concatenation
------------------------------

   `g77' doesn't support arbitrary operands for concatenation in
contexts where run-time allocation is required.  For example:

     SUBROUTINE X(A)
     CHARACTER*(*) A
     CALL FOO(A // 'suffix')


File: g77,  Node: SELECT CASE on CHARACTER Type,  Next: RECURSIVE Keyword,  Prev: Arbitrary Concatenation,  Up: Missing Features

18.3.5 `SELECT CASE' on `CHARACTER' Type
----------------------------------------

   Character-type selector/cases for `SELECT CASE' currently are not
supported.


File: g77,  Node: RECURSIVE Keyword,  Next: Popular Non-standard Types,  Prev: SELECT CASE on CHARACTER Type,  Up: Missing Features

18.3.6 `RECURSIVE' Keyword
--------------------------

   `g77' doesn't support the `RECURSIVE' keyword that F90 compilers do.
Nor does it provide any means for compiling procedures designed to do
recursion.

   All recursive code can be rewritten to not use recursion, but the
result is not pretty.


File: g77,  Node: Increasing Precision/Range,  Next: Enabling Debug Lines,  Prev: Support for Threads,  Up: Missing Features

18.3.7 Increasing Precision/Range
---------------------------------

   Some compilers, such as `f2c', have an option (`-r8', `-qrealsize=8'
or similar) that provides automatic treatment of `REAL' entities such
that they have twice the storage size, and a corresponding increase in
the range and precision, of what would normally be the `REAL(KIND=1)'
(default `REAL') type.  (This affects `COMPLEX' the same way.)

   They also typically offer another option (`-i8') to increase
`INTEGER' entities so they are twice as large (with roughly twice as
much range).

   (There are potential pitfalls in using these options.)

   `g77' does not yet offer any option that performs these kinds of
transformations.  Part of the problem is the lack of detailed
specifications regarding exactly how these options affect the
interpretation of constants, intrinsics, and so on.

   Until `g77' addresses this need, programmers could improve the
portability of their code by modifying it to not require compile-time
options to produce correct results.  Some free tools are available
which may help, specifically in Toolpack (which one would expect to be
sound) and the `fortran' section of the Netlib repository.

   Use of preprocessors can provide a fairly portable means to work
around the lack of widely portable methods in the Fortran language
itself (though increasing acceptance of Fortran 90 would alleviate this
problem).


File: g77,  Node: Popular Non-standard Types,  Next: Full Support for Compiler Types,  Prev: RECURSIVE Keyword,  Up: Missing Features

18.3.8 Popular Non-standard Types
---------------------------------

   `g77' doesn't fully support `INTEGER*2', `LOGICAL*1', and similar.
Version 0.6 will provide full support for this very popular set of
features.  In the meantime, version 0.5.18 provides rudimentary support
for them.


File: g77,  Node: Full Support for Compiler Types,  Next: Array Bounds Expressions,  Prev: Popular Non-standard Types,  Up: Missing Features

18.3.9 Full Support for Compiler Types
--------------------------------------

   `g77' doesn't support `INTEGER', `REAL', and `COMPLEX' equivalents
for _all_ applicable back-end-supported types (`char', `short int',
`int', `long int', `long long int', and `long double').  This means
providing intrinsic support, and maybe constant support (using F90
syntax) as well, and, for most machines will result in automatic
support of `INTEGER*1', `INTEGER*2', `INTEGER*8', maybe even `REAL*16',
and so on.  This is scheduled for version 0.6.


File: g77,  Node: Array Bounds Expressions,  Next: POINTER Statements,  Prev: Full Support for Compiler Types,  Up: Missing Features

18.3.10 Array Bounds Expressions
--------------------------------

   `g77' doesn't support more general expressions to dimension arrays,
such as array element references, function references, etc.

   For example, `g77' currently does not accept the following:

     SUBROUTINE X(M, N)
     INTEGER N(10), M(N(2), N(1))


File: g77,  Node: POINTER Statements,  Next: Sensible Non-standard Constructs,  Prev: Array Bounds Expressions,  Up: Missing Features

18.3.11 POINTER Statements
--------------------------

   `g77' doesn't support pointers or allocatable objects (other than
automatic arrays).  This set of features is probably considered just
behind intrinsics in `PARAMETER' statements on the list of large,
important things to add to `g77'.

   In the meantime, consider using the `INTEGER(KIND=7)' declaration to
specify that a variable must be able to hold a pointer.  This construct
is not portable to other non-GNU compilers, but it is portable to all
machines GNU Fortran supports when `g77' is used.

   *Note Functions and Subroutines::, for information on `%VAL()',
`%REF()', and `%DESCR()' constructs, which are useful for passing
pointers to procedures written in languages other than Fortran.


File: g77,  Node: Sensible Non-standard Constructs,  Next: READONLY Keyword,  Prev: POINTER Statements,  Up: Missing Features

18.3.12 Sensible Non-standard Constructs
----------------------------------------

   `g77' rejects things other compilers accept, like `INTRINSIC
SQRT,SQRT'.  As time permits in the future, some of these things that
are easy for humans to read and write and unlikely to be intended to
mean something else will be accepted by `g77' (though `-fpedantic'
should trigger warnings about such non-standard constructs).

   Until `g77' no longer gratuitously rejects sensible code, you might
as well fix your code to be more standard-conforming and portable.

   The kind of case that is important to except from the recommendation
to change your code is one where following good coding rules would
force you to write non-standard code that nevertheless has a clear
meaning.

   For example, when writing an `INCLUDE' file that defines a common
block, it might be appropriate to include a `SAVE' statement for the
common block (such as `SAVE /CBLOCK/'), so that variables defined in
the common block retain their values even when all procedures declaring
the common block become inactive (return to their callers).

   However, putting `SAVE' statements in an `INCLUDE' file would
prevent otherwise standard-conforming code from also specifying the
`SAVE' statement, by itself, to indicate that all local variables and
arrays are to have the `SAVE' attribute.

   For this reason, `g77' already has been changed to allow this
combination, because although the general problem of gratuitously
rejecting unambiguous and "safe" constructs still exists in `g77', this
particular construct was deemed useful enough that it was worth fixing
`g77' for just this case.

   So, while there is no need to change your code to avoid using this
particular construct, there might be other, equally appropriate but
non-standard constructs, that you shouldn't have to stop using just
because `g77' (or any other compiler) gratuitously rejects it.

   Until the general problem is solved, if you have any such construct
you believe is worthwhile using (e.g. not just an arbitrary, redundant
specification of an attribute), please submit a bug report with an
explanation, so we can consider fixing `g77' just for cases like yours.


File: g77,  Node: READONLY Keyword,  Next: FLUSH Statement,  Prev: Sensible Non-standard Constructs,  Up: Missing Features

18.3.13 `READONLY' Keyword
--------------------------

   Support for `READONLY', in `OPEN' statements, requires `libg2c'
support, to make sure that `CLOSE(...,STATUS='DELETE')' does not delete
a file opened on a unit with the `READONLY' keyword, and perhaps to
trigger a fatal diagnostic if a `WRITE' or `PRINT' to such a unit is
attempted.

   _Note:_ It is not sufficient for `g77' and `libg2c' (its version of
`libf2c') to assume that `READONLY' does not need some kind of explicit
support at run time, due to UNIX systems not (generally) needing it.
`g77' is not just a UNIX-based compiler!

   Further, mounting of non-UNIX filesystems on UNIX systems (such as
via NFS) might require proper `READONLY' support.

   (Similar issues might be involved with supporting the `SHARED'
keyword.)


File: g77,  Node: FLUSH Statement,  Next: Expressions in FORMAT Statements,  Prev: READONLY Keyword,  Up: Missing Features

18.3.14 `FLUSH' Statement
-------------------------

   `g77' could perhaps use a `FLUSH' statement that does what `CALL
FLUSH' does, but that supports `*' as the unit designator (same unit as
for `PRINT') and accepts `ERR=' and/or `IOSTAT=' specifiers.


File: g77,  Node: Expressions in FORMAT Statements,  Next: Explicit Assembler Code,  Prev: FLUSH Statement,  Up: Missing Features

18.3.15 Expressions in `FORMAT' Statements
------------------------------------------

   `g77' doesn't support `FORMAT(I<J>)' and the like.  Supporting this
requires a significant redesign or replacement of `libg2c'.

   However, `g77' does support this construct when the expression is
constant (as of version 0.5.22).  For example:

           PARAMETER (IWIDTH = 12)
     10    FORMAT (I<IWIDTH>)

   Otherwise, at least for output (`PRINT' and `WRITE'), Fortran code
making use of this feature can be rewritten to avoid it by constructing
the `FORMAT' string in a `CHARACTER' variable or array, then using that
variable or array in place of the `FORMAT' statement label to do the
original `PRINT' or `WRITE'.

   Many uses of this feature on input can be rewritten this way as
well, but not all can.  For example, this can be rewritten:

           READ 20, I
     20    FORMAT (I<J>)

   However, this cannot, in general, be rewritten, especially when
`ERR=' and `END=' constructs are employed:

           READ 30, J, I
     30    FORMAT (I<J>)


File: g77,  Node: Explicit Assembler Code,  Next: Q Edit Descriptor,  Prev: Expressions in FORMAT Statements,  Up: Missing Features

18.3.16 Explicit Assembler Code
-------------------------------

   `g77' needs to provide some way, a la `gcc', for `g77' code to
specify explicit assembler code.


File: g77,  Node: Q Edit Descriptor,  Next: Old-style PARAMETER Statements,  Prev: Explicit Assembler Code,  Up: Missing Features

18.3.17 Q Edit Descriptor
-------------------------

   The `Q' edit descriptor in `FORMAT's isn't supported.  (This is
meant to get the number of characters remaining in an input record.)
Supporting this requires a significant redesign or replacement of
`libg2c'.

   A workaround might be using internal I/O or the stream-based
intrinsics.  *Note FGetC Intrinsic (subroutine)::.


File: g77,  Node: Old-style PARAMETER Statements,  Next: TYPE and ACCEPT I/O Statements,  Prev: Q Edit Descriptor,  Up: Missing Features

18.3.18 Old-style PARAMETER Statements
--------------------------------------

   `g77' doesn't accept `PARAMETER I=1'.  Supporting this obsolete form
of the `PARAMETER' statement would not be particularly hard, as most of
the parsing code is already in place and working.

   Until time/money is spent implementing it, you might as well fix
your code to use the standard form, `PARAMETER (I=1)' (possibly needing
`INTEGER I' preceding the `PARAMETER' statement as well, otherwise, in
the obsolete form of `PARAMETER', the type of the variable is set from
the type of the constant being assigned to it).


File: g77,  Node: TYPE and ACCEPT I/O Statements,  Next: STRUCTURE UNION RECORD MAP,  Prev: Old-style PARAMETER Statements,  Up: Missing Features

18.3.19 `TYPE' and `ACCEPT' I/O Statements
------------------------------------------

   `g77' doesn't support the I/O statements `TYPE' and `ACCEPT'.  These
are common extensions that should be easy to support, but also are
fairly easy to work around in user code.

   Generally, any `TYPE fmt,list' I/O statement can be replaced by
`PRINT fmt,list'.  And, any `ACCEPT fmt,list' statement can be replaced
by `READ fmt,list'.


File: g77,  Node: STRUCTURE UNION RECORD MAP,  Next: OPEN CLOSE and INQUIRE Keywords,  Prev: TYPE and ACCEPT I/O Statements,  Up: Missing Features

18.3.20 `STRUCTURE', `UNION', `RECORD', `MAP'
---------------------------------------------

   `g77' doesn't support `STRUCTURE', `UNION', `RECORD', `MAP'.  This
set of extensions is quite a bit lower on the list of large, important
things to add to `g77', partly because it requires a great deal of work
either upgrading or replacing `libg2c'.


File: g77,  Node: OPEN CLOSE and INQUIRE Keywords,  Next: ENCODE and DECODE,  Prev: STRUCTURE UNION RECORD MAP,  Up: Missing Features

18.3.21 `OPEN', `CLOSE', and `INQUIRE' Keywords
-----------------------------------------------

   `g77' doesn't have support for keywords such as `DISP='DELETE'' in
the `OPEN', `CLOSE', and `INQUIRE' statements.  These extensions are
easy to add to `g77' itself, but require much more work on `libg2c'.

   `g77' doesn't support `FORM='PRINT'' or an equivalent to translate
the traditional `carriage control' characters in column 1 of output to
use backspaces, carriage returns and the like.  However programs exist
to translate them in output files (or standard output).  These are
typically called either `fpr' or `asa'.  You can get a version of `asa'
from `ftp://sunsite.unc.edu/pub/Linux/devel/lang/fortran' for GNU
systems which will probably build easily on other systems.
Alternatively, `fpr' is in BSD distributions in various archive sites.


File: g77,  Node: ENCODE and DECODE,  Next: AUTOMATIC Statement,  Prev: OPEN CLOSE and INQUIRE Keywords,  Up: Missing Features

18.3.22 `ENCODE' and `DECODE'
-----------------------------

   `g77' doesn't support `ENCODE' or `DECODE'.

   These statements are best replaced by READ and WRITE statements
involving internal files (CHARACTER variables and arrays).

   For example, replace a code fragment like

           INTEGER*1 LINE(80)
     ...
           DECODE (80, 9000, LINE) A, B, C
     ...
     9000  FORMAT (1X, 3(F10.5))

with:

           CHARACTER*80 LINE
     ...
           READ (UNIT=LINE, FMT=9000) A, B, C
     ...
     9000  FORMAT (1X, 3(F10.5))

   Similarly, replace a code fragment like

           INTEGER*1 LINE(80)
     ...
           ENCODE (80, 9000, LINE) A, B, C
     ...
     9000  FORMAT (1X, 'OUTPUT IS ', 3(F10.5))

with:

           CHARACTER*80 LINE
     ...
           WRITE (UNIT=LINE, FMT=9000) A, B, C
     ...
     9000  FORMAT (1X, 'OUTPUT IS ', 3(F10.5))

   It is entirely possible that `ENCODE' and `DECODE' will be supported
by a future version of `g77'.


File: g77,  Node: AUTOMATIC Statement,  Next: Suppressing Space Padding,  Prev: ENCODE and DECODE,  Up: Missing Features

18.3.23 `AUTOMATIC' Statement
-----------------------------

   `g77' doesn't support the `AUTOMATIC' statement that `f2c' does.

   `AUTOMATIC' would identify a variable or array as not being
`SAVE''d, which is normally the default, but which would be especially
useful for code that, _generally_, needed to be compiled with the
`-fno-automatic' option.

   `AUTOMATIC' also would serve as a hint to the compiler that placing
the variable or array--even a very large array-on the stack is
acceptable.

   `AUTOMATIC' would not, by itself, designate the containing procedure
as recursive.

   `AUTOMATIC' should work syntactically like `SAVE', in that
`AUTOMATIC' with no variables listed should apply to all pertinent
variables and arrays (which would not include common blocks or their
members).

   Variables and arrays denoted as `AUTOMATIC' would not be permitted
to be initialized via `DATA' or other specification of any initial
values, requiring explicit initialization, such as via assignment
statements.

   Perhaps `UNSAVE' and `STATIC', as strict semantic opposites to
`SAVE' and `AUTOMATIC', should be provided as well.


File: g77,  Node: Suppressing Space Padding,  Next: Fortran Preprocessor,  Prev: AUTOMATIC Statement,  Up: Missing Features

18.3.24 Suppressing Space Padding of Source Lines
-------------------------------------------------

   `g77' should offer VXT-Fortran-style suppression of virtual spaces
at the end of a source line if an appropriate command-line option is
specified.

   This affects cases where a character constant is continued onto the
next line in a fixed-form source file, as in the following example:

     10    PRINT *,'HOW MANY
          1 SPACES?'

`g77', and many other compilers, virtually extend the continued line
through column 72 with spaces that become part of the character
constant, but Digital Fortran normally didn't, leaving only one space
between `MANY' and `SPACES?' in the output of the above statement.

   Fairly recently, at least one version of Digital Fortran was
enhanced to provide the other behavior when a command-line option is
specified, apparently due to demand from readers of the USENET group
`comp.lang.fortran' to offer conformance to this widespread practice in
the industry.  `g77' should return the favor by offering conformance to
Digital's approach to handling the above example.


File: g77,  Node: Fortran Preprocessor,  Next: Bit Operations on Floating-point Data,  Prev: Suppressing Space Padding,  Up: Missing Features

18.3.25 Fortran Preprocessor
----------------------------

   `g77' should offer a preprocessor designed specifically for Fortran
to replace `cpp -traditional'.  There are several out there worth
evaluating, at least.

   Such a preprocessor would recognize Hollerith constants, properly
parse comments and character constants, and so on.  It might also
recognize, process, and thus preprocess files included via the
`INCLUDE' directive.


File: g77,  Node: Bit Operations on Floating-point Data,  Next: Really Ugly Character Assignments,  Prev: Fortran Preprocessor,  Up: Missing Features

18.3.26 Bit Operations on Floating-point Data
---------------------------------------------

   `g77' does not allow `REAL' and other non-integral types for
arguments to intrinsics like `And', `Or', and `Shift'.

   For example, this program is rejected by `g77', because the
intrinsic `Iand' does not accept `REAL' arguments:

     DATA A/7.54/, B/9.112/
     PRINT *, IAND(A, B)
     END


File: g77,  Node: Really Ugly Character Assignments,  Next: POSIX Standard,  Prev: Bit Operations on Floating-point Data,  Up: Missing Features

18.3.27 Really Ugly Character Assignments
-----------------------------------------

   An option such as `-fugly-char' should be provided to allow

     REAL*8 A1
     DATA A1 / '12345678' /

   and:

     REAL*8 A1
     A1 = 'ABCDEFGH'


File: g77,  Node: POSIX Standard,  Next: Floating-point Exception Handling,  Prev: Really Ugly Character Assignments,  Up: Missing Features

18.3.28 `POSIX' Standard
------------------------

   `g77' should support the POSIX standard for Fortran.


File: g77,  Node: Floating-point Exception Handling,  Next: Nonportable Conversions,  Prev: POSIX Standard,  Up: Missing Features

18.3.29 Floating-point Exception Handling
-----------------------------------------

   The `gcc' backend and, consequently, `g77', currently provides no
general control over whether or not floating-point exceptions are
trapped or ignored.  (Ignoring them typically results in NaN values
being propagated in systems that conform to IEEE 754.)  The behaviour
is normally inherited from the system-dependent startup code, though
some targets, such as the Alpha, have code generation options which
change the behaviour.

   Most systems provide some C-callable mechanism to change this; this
can be invoked at startup using `gcc''s `constructor' attribute.  For
example, just compiling and linking the following C code with your
program will turn on exception trapping for the "common" exceptions on
an x86-based GNU system:

     #include <fpu_control.h>
     static void __attribute__ ((constructor))
     trapfpe ()
     {
       __setfpucw (_FPU_DEFAULT &
                   ~(_FPU_MASK_IM | _FPU_MASK_ZM | _FPU_MASK_OM));
     }

   A convenient trick is to compile this something like:
     gcc -o libtrapfpe.a trapfpe.c
   and then use it by adding `-trapfpe' to the `g77' command line when
linking.


File: g77,  Node: Nonportable Conversions,  Next: Large Automatic Arrays,  Prev: Floating-point Exception Handling,  Up: Missing Features

18.3.30 Nonportable Conversions
-------------------------------

   `g77' doesn't accept some particularly nonportable, silent data-type
conversions such as `LOGICAL' to `REAL' (as in `A=.FALSE.', where `A'
is type `REAL'), that other compilers might quietly accept.

   Some of these conversions are accepted by `g77' when the
`-fugly-logint' option is specified.  Perhaps it should accept more or
all of them.


File: g77,  Node: Large Automatic Arrays,  Next: Support for Threads,  Prev: Nonportable Conversions,  Up: Missing Features

18.3.31 Large Automatic Arrays
------------------------------

   Currently, automatic arrays always are allocated on the stack.  For
situations where the stack cannot be made large enough, `g77' should
offer a compiler option that specifies allocation of automatic arrays
in heap storage.


File: g77,  Node: Support for Threads,  Next: Increasing Precision/Range,  Prev: Large Automatic Arrays,  Up: Missing Features

18.3.32 Support for Threads
---------------------------

   Neither the code produced by `g77' nor the `libg2c' library are
thread-safe, nor does `g77' have support for parallel processing (other
than the instruction-level parallelism available on some processors).
A package such as PVM might help here.


File: g77,  Node: Enabling Debug Lines,  Next: Better Warnings,  Prev: Increasing Precision/Range,  Up: Missing Features

18.3.33 Enabling Debug Lines
----------------------------

   An option such as `-fdebug-lines' should be provided to turn
fixed-form lines beginning with `D' to be treated as if they began with
a space, instead of as if they began with a `C' (as comment lines).


File: g77,  Node: Better Warnings,  Next: Gracefully Handle Sensible Bad Code,  Prev: Enabling Debug Lines,  Up: Missing Features

18.3.34 Better Warnings
-----------------------

   Because of how `g77' generates code via the back end, it doesn't
always provide warnings the user wants.  Consider:

     PROGRAM X
     PRINT *, A
     END

   Currently, the above is not flagged as a case of using an
uninitialized variable, because `g77' generates a run-time library call
that looks, to the GBE, like it might actually _modify_ `A' at run time.
(And, in fact, depending on the previous run-time library call, it
would!)

   Fixing this requires one of the following:

   * Switch to new library, `libg77', that provides a more "clean"
     interface, vis-a-vis input, output, and modified arguments, so the
     GBE can tell what's going on.

     This would provide a pretty big performance improvement, at least
     theoretically, and, ultimately, in practice, for some types of
     code.

   * Have `g77' pass a pointer to a temporary containing a copy of `A',
     instead of to `A' itself.  The GBE would then complain about the
     copy operation involving a potentially uninitialized variable.

     This might also provide a performance boost for some code, because
     `A' might then end up living in a register, which could help with
     inner loops.

   * Have `g77' use a GBE construct similar to `ADDR_EXPR' but with
     extra information on the fact that the item pointed to won't be
     modified (a la `const' in C).

     Probably the best solution for now, but not quite trivial to
     implement in the general case.  Worth considering after `g77' 0.6
     is considered pretty solid.


File: g77,  Node: Gracefully Handle Sensible Bad Code,  Next: Non-standard Conversions,  Prev: Better Warnings,  Up: Missing Features

18.3.35 Gracefully Handle Sensible Bad Code
-------------------------------------------

   `g77' generally should continue processing for warnings and
recoverable (user) errors whenever possible--that is, it shouldn't
gratuitously make bad or useless code.

   For example:

     INTRINSIC ZABS
     CALL FOO(ZABS)
     END

When compiling the above with `-ff2c-intrinsics-disable', `g77' should
indeed complain about passing `ZABS', but it still should compile,
instead of rejecting the entire `CALL' statement.  (Some of this is
related to improving the compiler internals to improve how statements
are analyzed.)


File: g77,  Node: Non-standard Conversions,  Next: Non-standard Intrinsics,  Prev: Gracefully Handle Sensible Bad Code,  Up: Missing Features

18.3.36 Non-standard Conversions
--------------------------------

   `-Wconversion' and related should flag places where non-standard
conversions are found.  Perhaps much of this would be part of `-Wugly*'.


File: g77,  Node: Non-standard Intrinsics,  Next: Modifying DO Variable,  Prev: Non-standard Conversions,  Up: Missing Features

18.3.37 Non-standard Intrinsics
-------------------------------

   `g77' needs a new option, like `-Wintrinsics', to warn about use of
non-standard intrinsics without explicit `INTRINSIC' statements for
them.  This would help find code that might fail silently when ported
to another compiler.


File: g77,  Node: Modifying DO Variable,  Next: Better Pedantic Compilation,  Prev: Non-standard Intrinsics,  Up: Missing Features

18.3.38 Modifying `DO' Variable
-------------------------------

   `g77' should warn about modifying `DO' variables via `EQUIVALENCE'.
(The internal information gathered to produce this warning might also
be useful in setting the internal "doiter" flag for a variable or even
array reference within a loop, since that might produce faster code
someday.)

   For example, this code is invalid, so `g77' should warn about the
invalid assignment to `NOTHER':

     EQUIVALENCE (I, NOTHER)
     DO I = 1, 100
        IF (I.EQ. 10) NOTHER = 20
     END DO


File: g77,  Node: Better Pedantic Compilation,  Next: Warn About Implicit Conversions,  Prev: Modifying DO Variable,  Up: Missing Features

18.3.39 Better Pedantic Compilation
-----------------------------------

   `g77' needs to support `-fpedantic' more thoroughly, and use it only
to generate warnings instead of rejecting constructs outright.  Have it
warn: if a variable that dimensions an array is not a dummy or placed
explicitly in `COMMON' (F77 does not allow it to be placed in `COMMON'
via `EQUIVALENCE'); if specification statements follow
statement-function-definition statements; about all sorts of syntactic
extensions.


File: g77,  Node: Warn About Implicit Conversions,  Next: Invalid Use of Hollerith Constant,  Prev: Better Pedantic Compilation,  Up: Missing Features

18.3.40 Warn About Implicit Conversions
---------------------------------------

   `g77' needs a `-Wpromotions' option to warn if source code appears
to expect automatic, silent, and somewhat dangerous compiler-assisted
conversion of `REAL(KIND=1)' constants to `REAL(KIND=2)' based on
context.

   For example, it would warn about cases like this:

     DOUBLE PRECISION FOO
     PARAMETER (TZPHI = 9.435784839284958)
     FOO = TZPHI * 3D0


File: g77,  Node: Invalid Use of Hollerith Constant,  Next: Dummy Array Without Dimensioning Dummy,  Prev: Warn About Implicit Conversions,  Up: Missing Features

18.3.41 Invalid Use of Hollerith Constant
-----------------------------------------

   `g77' should disallow statements like `RETURN 2HAB', which are
invalid in both source forms (unlike `RETURN (2HAB)', which probably
still makes no sense but at least can be reliably parsed).  Fixed-form
processing rejects it, but not free-form, except in a way that is a bit
difficult to understand.


File: g77,  Node: Dummy Array Without Dimensioning Dummy,  Next: Invalid FORMAT Specifiers,  Prev: Invalid Use of Hollerith Constant,  Up: Missing Features

18.3.42 Dummy Array Without Dimensioning Dummy
----------------------------------------------

   `g77' should complain when a list of dummy arguments containing an
adjustable dummy array does not also contain every variable listed in
the dimension list of the adjustable array.

   Currently, `g77' does complain about a variable that dimensions an
array but doesn't appear in any dummy list or `COMMON' area, but this
needs to be extended to catch cases where it doesn't appear in every
dummy list that also lists any arrays it dimensions.

   For example, `g77' should warn about the entry point `ALT' below,
since it includes `ARRAY' but not `ISIZE' in its list of arguments:

     SUBROUTINE PRIMARY(ARRAY, ISIZE)
     REAL ARRAY(ISIZE)
     ENTRY ALT(ARRAY)


File: g77,  Node: Invalid FORMAT Specifiers,  Next: Ambiguous Dialects,  Prev: Dummy Array Without Dimensioning Dummy,  Up: Missing Features

18.3.43 Invalid FORMAT Specifiers
---------------------------------

   `g77' should check `FORMAT' specifiers for validity as it does
`FORMAT' statements.

   For example, a diagnostic would be produced for:

     PRINT 'HI THERE!'  !User meant PRINT *, 'HI THERE!'


File: g77,  Node: Ambiguous Dialects,  Next: Unused Labels,  Prev: Invalid FORMAT Specifiers,  Up: Missing Features

18.3.44 Ambiguous Dialects
--------------------------

   `g77' needs a set of options such as `-Wugly*', `-Wautomatic',
`-Wvxt', `-Wf90', and so on.  These would warn about places in the
user's source where ambiguities are found, helpful in resolving
ambiguities in the program's dialect or dialects.


File: g77,  Node: Unused Labels,  Next: Informational Messages,  Prev: Ambiguous Dialects,  Up: Missing Features

18.3.45 Unused Labels
---------------------

   `g77' should warn about unused labels when `-Wunused' is in effect.


File: g77,  Node: Informational Messages,  Next: Uninitialized Variables at Run Time,  Prev: Unused Labels,  Up: Missing Features

18.3.46 Informational Messages
------------------------------

   `g77' needs an option to suppress information messages (notes).
`-w' does this but also suppresses warnings.  The default should be to
suppress info messages.

   Perhaps info messages should simply be eliminated.


File: g77,  Node: Uninitialized Variables at Run Time,  Next: Portable Unformatted Files,  Prev: Informational Messages,  Up: Missing Features

18.3.47 Uninitialized Variables at Run Time
-------------------------------------------

   `g77' needs an option to initialize everything (not otherwise
explicitly initialized) to "weird" (machine-dependent) values, e.g.
NaNs, bad (non-`NULL') pointers, and largest-magnitude integers, would
help track down references to some kinds of uninitialized variables at
run time.

   Note that use of the options `-O -Wuninitialized' can catch many
such bugs at compile time.


File: g77,  Node: Portable Unformatted Files,  Next: Better List-directed I/O,  Prev: Uninitialized Variables at Run Time,  Up: Missing Features

18.3.48 Portable Unformatted Files
----------------------------------

   `g77' has no facility for exchanging unformatted files with systems
using different number formats--even differing only in endianness (byte
order)--or written by other compilers.  Some compilers provide
facilities at least for doing byte-swapping during unformatted I/O.

   It is unrealistic to expect to cope with exchanging unformatted files
with arbitrary other compiler runtimes, but the `g77' runtime should at
least be able to read files written by `g77' on systems with different
number formats, particularly if they differ only in byte order.

   In case you do need to write a program to translate to or from `g77'
(`libf2c') unformatted files, they are written as follows:
Sequential
     Unformatted sequential records consist of
       1. A number giving the length of the record contents;

       2. the length of record contents again (for backspace).

     The record length is of C type `long'; this means that it is 8
     bytes on 64-bit systems such as Alpha GNU/Linux and 4 bytes on
     other systems, such as x86 GNU/Linux.  Consequently such files
     cannot be exchanged between 64-bit and 32-bit systems, even with
     the same basic number format.

Direct access
     Unformatted direct access files form a byte stream of length
     RECORDS*RECL bytes, where RECORDS is the maximum record number
     (`REC=RECORDS') written and RECL is the record length in bytes
     specified in the `OPEN' statement (`RECL=RECL').  Data appear in
     the records as determined by the relevant `WRITE' statement.
     Dummy records with arbitrary contents appear in the file in place
     of records which haven't been written.

   Thus for exchanging a sequential or direct access unformatted file
between big- and little-endian 32-bit systems using IEEE 754 floating
point it would be sufficient to reverse the bytes in consecutive words
in the file if, and _only_ if, only `REAL*4', `COMPLEX', `INTEGER*4'
and/or `LOGICAL*4' data have been written to it by `g77'.

   If necessary, it is possible to do byte-oriented i/o with `g77''s
`FGETC' and `FPUTC' intrinsics.  Byte-swapping can be done in Fortran
by equivalencing larger sized variables to an `INTEGER*1' array or a
set of scalars.

   If you need to exchange binary data between arbitrary system and
compiler variations, we recommend using a portable binary format with
Fortran bindings, such as NCSA's HDF (`http://hdf.ncsa.uiuc.edu/') or
PACT's PDB(1) (`http://www.llnl.gov/def_sci/pact/pact_homepage.html').
(Unlike, say, CDF or XDR, HDF-like systems write in the native number
formats and only incur overhead when they are read on a system with a
different format.)  A future `g77' runtime library should use such
techniques.

   ---------- Footnotes ----------

   (1) No, not _that_ one.


File: g77,  Node: Better List-directed I/O,  Next: Default to Console I/O,  Prev: Portable Unformatted Files,  Up: Missing Features

18.3.49 Better List-directed I/O
--------------------------------

   Values output using list-directed I/O (`PRINT *, R, D') should be
written with a field width, precision, and so on appropriate for the
type (precision) of each value.

   (Currently, no distinction is made between single-precision and
double-precision values by `libf2c'.)

   It is likely this item will require the `libg77' project to be
undertaken.

   In the meantime, use of formatted I/O is recommended.  While it
might be of little consolation, `g77' does support
`FORMAT(F<WIDTH>.4)', for example, as long as `WIDTH' is defined as a
named constant (via `PARAMETER').  That at least allows some
compile-time specification of the precision of a data type, perhaps
controlled by preprocessing directives.


File: g77,  Node: Default to Console I/O,  Next: Labels Visible to Debugger,  Prev: Better List-directed I/O,  Up: Missing Features

18.3.50 Default to Console I/O
------------------------------

   The default I/O units, specified by `READ FMT', `READ (UNIT=*)',
`WRITE (UNIT=*)', and `PRINT FMT', should not be units 5 (input) and 6
(output), but, rather, unit numbers not normally available for use in
statements such as `OPEN' and `CLOSE'.

   Changing this would allow a program to connect units 5 and 6 to
files via `OPEN', but still use `READ (UNIT=*)' and `PRINT' to do I/O
to the "console".

   This change probably requires the `libg77' project.


File: g77,  Node: Labels Visible to Debugger,  Prev: Default to Console I/O,  Up: Missing Features

18.3.51 Labels Visible to Debugger
----------------------------------

   `g77' should output debugging information for statements labels, for
use by debuggers that know how to support them.  Same with weirder
things like construct names.  It is not yet known if any debug formats
or debuggers support these.


File: g77,  Node: Disappointments,  Next: Non-bugs,  Prev: Missing Features,  Up: Trouble

18.4 Disappointments and Misunderstandings
==========================================

   These problems are perhaps regrettable, but we don't know any
practical way around them for now.

* Menu:

* Mangling of Names::                       `SUBROUTINE FOO' is given
                                              external name `foo_'.
* Multiple Definitions of External Names::  No doing both `COMMON /FOO/'
                                              and `SUBROUTINE FOO'.
* Limitation on Implicit Declarations::     No `IMPLICIT CHARACTER*(*)'.


File: g77,  Node: Mangling of Names,  Next: Multiple Definitions of External Names,  Up: Disappointments

18.4.1 Mangling of Names in Source Code
---------------------------------------

   The current external-interface design, which includes naming of
external procedures, COMMON blocks, and the library interface, has
various usability problems, including things like adding underscores
where not really necessary (and preventing easier inter-language
operability) and yet not providing complete namespace freedom for user
C code linked with Fortran apps (due to the naming of functions in the
library, among other things).

   Project GNU should at least get all this "right" for systems it
fully controls, such as the Hurd, and provide defaults and options for
compatibility with existing systems and interoperability with popular
existing compilers.


File: g77,  Node: Multiple Definitions of External Names,  Next: Limitation on Implicit Declarations,  Prev: Mangling of Names,  Up: Disappointments

18.4.2 Multiple Definitions of External Names
---------------------------------------------

   `g77' doesn't allow a common block and an external procedure or
`BLOCK DATA' to have the same name.  Some systems allow this, but `g77'
does not, to be compatible with `f2c'.

   `g77' could special-case the way it handles `BLOCK DATA', since it
is not compatible with `f2c' in this particular area (necessarily,
since `g77' offers an important feature here), but it is likely that
such special-casing would be very annoying to people with programs that
use `EXTERNAL FOO', with no other mention of `FOO' in the same program
unit, to refer to external procedures, since the result would be that
`g77' would treat these references as requests to force-load BLOCK DATA
program units.

   In that case, if `g77' modified names of `BLOCK DATA' so they could
have the same names as `COMMON', users would find that their programs
wouldn't link because the `FOO' procedure didn't have its name
translated the same way.

   (Strictly speaking, `g77' could emit a
null-but-externally-satisfying definition of `FOO' with its name
transformed as if it had been a `BLOCK DATA', but that probably invites
more trouble than it's worth.)


File: g77,  Node: Limitation on Implicit Declarations,  Prev: Multiple Definitions of External Names,  Up: Disappointments

18.4.3 Limitation on Implicit Declarations
------------------------------------------

   `g77' disallows `IMPLICIT CHARACTER*(*)'.  This is not
standard-conforming.


File: g77,  Node: Non-bugs,  Next: Warnings and Errors,  Prev: Disappointments,  Up: Trouble

18.5 Certain Changes We Don't Want to Make
==========================================

   This section lists changes that people frequently request, but which
we do not make because we think GNU Fortran is better without them.

* Menu:

* Backslash in Constants::           Why `'\\'' is a constant that
                                       is one, not two, characters long.
* Initializing Before Specifying::   Why `DATA VAR/1/' can't precede
                                       `COMMON VAR'.
* Context-Sensitive Intrinsicness::  Why `CALL SQRT' won't work.
* Context-Sensitive Constants::      Why `9.435784839284958' is a
                                       single-precision constant,
                                       and might be interpreted as
                                       `9.435785' or similar.
* Equivalence Versus Equality::      Why `.TRUE. .EQ. .TRUE.' won't work.
* Order of Side Effects::            Why `J = IFUNC() - IFUNC()' might
                                       not behave as expected.


File: g77,  Node: Backslash in Constants,  Next: Initializing Before Specifying,  Up: Non-bugs

18.5.1 Backslash in Constants
-----------------------------

   In the opinion of many experienced Fortran users, `-fno-backslash'
should be the default, not `-fbackslash', as currently set by `g77'.

   First of all, you can always specify `-fno-backslash' to turn off
this processing.

   Despite not being within the spirit (though apparently within the
letter) of the ANSI FORTRAN 77 standard, `g77' defaults to
`-fbackslash' because that is what most UNIX `f77' commands default to,
and apparently lots of code depends on this feature.

   This is a particularly troubling issue.  The use of a C construct in
the midst of Fortran code is bad enough, worse when it makes existing
Fortran programs stop working (as happens when programs written for
non-UNIX systems are ported to UNIX systems with compilers that provide
the `-fbackslash' feature as the default--sometimes with no option to
turn it off).

   The author of GNU Fortran wished, for reasons of linguistic purity,
to make `-fno-backslash' the default for GNU Fortran and thus require
users of UNIX `f77' and `f2c' to specify `-fbackslash' to get the UNIX
behavior.

   However, the realization that `g77' is intended as a replacement for
_UNIX_ `f77', caused the author to choose to make `g77' as compatible
with `f77' as feasible, which meant making `-fbackslash' the default.

   The primary focus on compatibility is at the source-code level, and
the question became "What will users expect a replacement for `f77' to
do, by default?"  Although at least one UNIX `f77' does not provide
`-fbackslash' as a default, it appears that the majority of them do,
which suggests that the majority of code that is compiled by UNIX `f77'
compilers expects `-fbackslash' to be the default.

   It is probably the case that more code exists that would _not_ work
with `-fbackslash' in force than code that requires it be in force.

   However, most of _that_ code is not being compiled with `f77', and
when it is, new build procedures (shell scripts, makefiles, and so on)
must be set up anyway so that they work under UNIX.  That makes a much
more natural and safe opportunity for non-UNIX users to adapt their
build procedures for `g77''s default of `-fbackslash' than would exist
for the majority of UNIX `f77' users who would have to modify existing,
working build procedures to explicitly specify `-fbackslash' if that was
not the default.

   One suggestion has been to configure the default for `-fbackslash'
(and perhaps other options as well) based on the configuration of `g77'.

   This is technically quite straightforward, but will be avoided even
in cases where not configuring defaults to be dependent on a particular
configuration greatly inconveniences some users of legacy code.

   Many users appreciate the GNU compilers because they provide an
environment that is uniform across machines.  These users would be
inconvenienced if the compiler treated things like the format of the
source code differently on certain machines.

   Occasionally users write programs intended only for a particular
machine type.  On these occasions, the users would benefit if the GNU
Fortran compiler were to support by default the same dialect as the
other compilers on that machine.  But such applications are rare.  And
users writing a program to run on more than one type of machine cannot
possibly benefit from this kind of compatibility.  (This is consistent
with the design goals for `gcc'.  To change them for `g77', you must
first change them for `gcc'.  Do not ask the maintainers of `g77' to do
this for you, or to disassociate `g77' from the widely understood, if
not widely agreed-upon, goals for GNU compilers in general.)

   This is why GNU Fortran does and will treat backslashes in the same
fashion on all types of machines (by default).  *Note Direction of
Language Development::, for more information on this overall philosophy
guiding the development of the GNU Fortran language.

   Of course, users strongly concerned about portability should indicate
explicitly in their build procedures which options are expected by
their source code, or write source code that has as few such
expectations as possible.

   For example, avoid writing code that depends on backslash (`\')
being interpreted either way in particular, such as by starting a
program unit with:

     CHARACTER BACKSL
     PARAMETER (BACKSL = '\\')

Then, use concatenation of `BACKSL' anyplace a backslash is desired.
In this way, users can write programs which have the same meaning in
many Fortran dialects.

   (However, this technique does not work for Hollerith constants--which
is just as well, since the only generally portable uses for Hollerith
constants are in places where character constants can and should be
used instead, for readability.)


File: g77,  Node: Initializing Before Specifying,  Next: Context-Sensitive Intrinsicness,  Prev: Backslash in Constants,  Up: Non-bugs

18.5.2 Initializing Before Specifying
-------------------------------------

   `g77' does not allow `DATA VAR/1/' to appear in the source code
before `COMMON VAR', `DIMENSION VAR(10)', `INTEGER VAR', and so on.  In
general, `g77' requires initialization of a variable or array to be
specified _after_ all other specifications of attributes (type, size,
placement, and so on) of that variable or array are specified (though
_confirmation_ of data type is permitted).

   It is _possible_ `g77' will someday allow all of this, even though
it is not allowed by the FORTRAN 77 standard.

   Then again, maybe it is better to have `g77' always require
placement of `DATA' so that it can possibly immediately write constants
to the output file, thus saving time and space.

   That is, `DATA A/1000000*1/' should perhaps always be immediately
writable to canonical assembler, unless it's already known to be in a
`COMMON' area following as-yet-uninitialized stuff, and to do this it
cannot be followed by `COMMON A'.


File: g77,  Node: Context-Sensitive Intrinsicness,  Next: Context-Sensitive Constants,  Prev: Initializing Before Specifying,  Up: Non-bugs

18.5.3 Context-Sensitive Intrinsicness
--------------------------------------

   `g77' treats procedure references to _possible_ intrinsic names as
always enabling their intrinsic nature, regardless of whether the
_form_ of the reference is valid for that intrinsic.

   For example, `CALL SQRT' is interpreted by `g77' as an invalid
reference to the `SQRT' intrinsic function, because the reference is a
subroutine invocation.

   First, `g77' recognizes the statement `CALL SQRT' as a reference to
a _procedure_ named `SQRT', not to a _variable_ with that name (as it
would for a statement such as `V = SQRT').

   Next, `g77' establishes that, in the program unit being compiled,
`SQRT' is an intrinsic--not a subroutine that happens to have the same
name as an intrinsic (as would be the case if, for example, `EXTERNAL
SQRT' was present).

   Finally, `g77' recognizes that the _form_ of the reference is
invalid for that particular intrinsic.  That is, it recognizes that it
is invalid for an intrinsic _function_, such as `SQRT', to be invoked as
a _subroutine_.

   At that point, `g77' issues a diagnostic.

   Some users claim that it is "obvious" that `CALL SQRT' references an
external subroutine of their own, not an intrinsic function.

   However, `g77' knows about intrinsic subroutines, not just
functions, and is able to support both having the same names, for
example.

   As a result of this, `g77' rejects calls to intrinsics that are not
subroutines, and function invocations of intrinsics that are not
functions, just as it (and most compilers) rejects invocations of
intrinsics with the wrong number (or types) of arguments.

   So, use the `EXTERNAL SQRT' statement in a program unit that calls a
user-written subroutine named `SQRT'.


File: g77,  Node: Context-Sensitive Constants,  Next: Equivalence Versus Equality,  Prev: Context-Sensitive Intrinsicness,  Up: Non-bugs

18.5.4 Context-Sensitive Constants
----------------------------------

   `g77' does not use context to determine the types of constants or
named constants (`PARAMETER'), except for (non-standard) typeless
constants such as `'123'O'.

   For example, consider the following statement:

     PRINT *, 9.435784839284958 * 2D0

`g77' will interpret the (truncated) constant `9.435784839284958' as a
`REAL(KIND=1)', not `REAL(KIND=2)', constant, because the suffix `D0'
is not specified.

   As a result, the output of the above statement when compiled by
`g77' will appear to have "less precision" than when compiled by other
compilers.

   In these and other cases, some compilers detect the fact that a
single-precision constant is used in a double-precision context and
therefore interpret the single-precision constant as if it was
_explicitly_ specified as a double-precision constant.  (This has the
effect of appending _decimal_, not _binary_, zeros to the fractional
part of the number--producing different computational results.)

   The reason this misfeature is dangerous is that a slight, apparently
innocuous change to the source code can change the computational
results.  Consider:

     REAL ALMOST, CLOSE
     DOUBLE PRECISION FIVE
     PARAMETER (ALMOST = 5.000000000001)
     FIVE = 5
     CLOSE = 5.000000000001
     PRINT *, 5.000000000001 - FIVE
     PRINT *, ALMOST - FIVE
     PRINT *, CLOSE - FIVE
     END

Running the above program should result in the same value being printed
three times.  With `g77' as the compiler, it does.

   However, compiled by many other compilers, running the above program
would print two or three distinct values, because in two or three of
the statements, the constant `5.000000000001', which on most systems is
exactly equal to `5.' when interpreted as a single-precision constant,
is instead interpreted as a double-precision constant, preserving the
represented precision.  However, this "clever" promotion of type does
not extend to variables or, in some compilers, to named constants.

   Since programmers often are encouraged to replace manifest constants
or permanently-assigned variables with named constants (`PARAMETER' in
Fortran), and might need to replace some constants with variables
having the same values for pertinent portions of code, it is important
that compilers treat code so modified in the same way so that the
results of such programs are the same.  `g77' helps in this regard by
treating constants just the same as variables in terms of determining
their types in a context-independent way.

   Still, there is a lot of existing Fortran code that has been written
to depend on the way other compilers freely interpret constants' types
based on context, so anything `g77' can do to help flag cases of this
in such code could be very helpful.


File: g77,  Node: Equivalence Versus Equality,  Next: Order of Side Effects,  Prev: Context-Sensitive Constants,  Up: Non-bugs

18.5.5 Equivalence Versus Equality
----------------------------------

   Use of `.EQ.' and `.NE.' on `LOGICAL' operands is not supported,
except via `-fugly-logint', which is not recommended except for legacy
code (where the behavior expected by the _code_ is assumed).

   Legacy code should be changed, as resources permit, to use `.EQV.'
and `.NEQV.' instead, as these are permitted by the various Fortran
standards.

   New code should never be written expecting `.EQ.' or `.NE.' to work
if either of its operands is `LOGICAL'.

   The problem with supporting this "feature" is that there is unlikely
to be consensus on how it works, as illustrated by the following sample
program:

     LOGICAL L,M,N
     DATA L,M,N /3*.FALSE./
     IF (L.AND.M.EQ.N) PRINT *,'L.AND.M.EQ.N'
     END

   The issue raised by the above sample program is: what is the
precedence of `.EQ.' (and `.NE.') when applied to `LOGICAL' operands?

   Some programmers will argue that it is the same as the precedence
for `.EQ.' when applied to numeric (such as `INTEGER') operands.  By
this interpretation, the subexpression `M.EQ.N' must be evaluated first
in the above program, resulting in a program that, when run, does not
execute the `PRINT' statement.

   Other programmers will argue that the precedence is the same as the
precedence for `.EQV.', which is restricted by the standards to
`LOGICAL' operands.  By this interpretation, the subexpression
`L.AND.M' must be evaluated first, resulting in a program that _does_
execute the `PRINT' statement.

   Assigning arbitrary semantic interpretations to syntactic expressions
that might legitimately have more than one "obvious" interpretation is
generally unwise.

   The creators of the various Fortran standards have done a good job
in this case, requiring a distinct set of operators (which have their
own distinct precedence) to compare `LOGICAL' operands.  This
requirement results in expression syntax with more certain precedence
(without requiring substantial context), making it easier for
programmers to read existing code.  `g77' will avoid muddying up
elements of the Fortran language that were well-designed in the first
place.

   (Ask C programmers about the precedence of expressions such as `(a)
& (b)' and `(a) - (b)'--they cannot even tell you, without knowing more
context, whether the `&' and `-' operators are infix (binary) or unary!)

   Most dangerous of all is the fact that, even assuming consensus on
its meaning, an expression like `L.AND.M.EQ.N', if it is the result of
a typographical error, doesn't _look_ like it has such a typo.  Even
experienced Fortran programmers would not likely notice that
`L.AND.M.EQV.N' was, in fact, intended.

   So, this is a prime example of a circumstance in which a quality
compiler diagnoses the code, instead of leaving it up to someone
debugging it to know to turn on special compiler options that might
diagnose it.


File: g77,  Node: Order of Side Effects,  Prev: Equivalence Versus Equality,  Up: Non-bugs

18.5.6 Order of Side Effects
----------------------------

   `g77' does not necessarily produce code that, when run, performs
side effects (such as those performed by function invocations) in the
same order as in some other compiler--or even in the same order as
another version, port, or invocation (using different command-line
options) of `g77'.

   It is never safe to depend on the order of evaluation of side
effects.  For example, an expression like this may very well behave
differently from one compiler to another:

     J = IFUNC() - IFUNC()

There is no guarantee that `IFUNC' will be evaluated in any particular
order.  Either invocation might happen first.  If `IFUNC' returns 5 the
first time it is invoked, and returns 12 the second time, `J' might end
up with the value `7', or it might end up with `-7'.

   Generally, in Fortran, procedures with side-effects intended to be
visible to the caller are best designed as _subroutines_, not functions.
Examples of such side-effects include:

   * The generation of random numbers that are intended to influence
     return values.

   * Performing I/O (other than internal I/O to local variables).

   * Updating information in common blocks.

   An example of a side-effect that is not intended to be visible to
the caller is a function that maintains a cache of recently calculated
results, intended solely to speed repeated invocations of the function
with identical arguments.  Such a function can be safely used in
expressions, because if the compiler optimizes away one or more calls
to the function, operation of the program is unaffected (aside from
being speeded up).


File: g77,  Node: Warnings and Errors,  Prev: Non-bugs,  Up: Trouble

18.6 Warning Messages and Error Messages
========================================

   The GNU compiler can produce two kinds of diagnostics: errors and
warnings.  Each kind has a different purpose:

     _Errors_ report problems that make it impossible to compile your
     program.  GNU Fortran reports errors with the source file name,
     line number, and column within the line where the problem is
     apparent.

     _Warnings_ report other unusual conditions in your code that
     _might_ indicate a problem, although compilation can (and does)
     proceed.  Warning messages also report the source file name, line
     number, and column information, but include the text `warning:' to
     distinguish them from error messages.

   Warnings might indicate danger points where you should check to make
sure that your program really does what you intend; or the use of
obsolete features; or the use of nonstandard features of GNU Fortran.
Many warnings are issued only if you ask for them, with one of the `-W'
options (for instance, `-Wall' requests a variety of useful warnings).

   _Note:_ Currently, the text of the line and a pointer to the column
is printed in most `g77' diagnostics.  Probably, as of version 0.6,
`g77' will no longer print the text of the source line, instead printing
the column number following the file name and line number in a form
that GNU Emacs recognizes.  This change is expected to speed up and
reduce the memory usage of the `g77' compiler.

   *Note Options to Request or Suppress Warnings: Warning Options, for
more detail on these and related command-line options.


File: g77,  Node: Open Questions,  Next: Bugs,  Prev: Trouble,  Up: Top

19 Open Questions
*****************

   Please consider offering useful answers to these questions!

   * `LOC()' and other intrinsics are probably somewhat misclassified.
     Is the a need for more precise classification of intrinsics, and
     if so, what are the appropriate groupings?  Is there a need to
     individually enable/disable/delete/hide intrinsics from the
     command line?


File: g77,  Node: Bugs,  Next: Service,  Prev: Open Questions,  Up: Top

20 Reporting Bugs
*****************

   Your bug reports play an essential role in making GNU Fortran
reliable.

   When you encounter a problem, the first thing to do is to see if it
is already known.  *Note Trouble::.  If it isn't known, then you should
report the problem.

   Reporting a bug might help you by bringing a solution to your
problem, or it might not.  (If it does not, look in the service
directory; see *Note Service::.)  In any case, the principal function
of a bug report is to help the entire community by making the next
version of GNU Fortran work better.  Bug reports are your contribution
to the maintenance of GNU Fortran.

   Since the maintainers are very overloaded, we cannot respond to every
bug report.  However, if the bug has not been fixed, we are likely to
send you a patch and ask you to tell us whether it works.

   In order for a bug report to serve its purpose, you must include the
information that makes for fixing the bug.

* Menu:

* Criteria: Bug Criteria.    Have you really found a bug?
* Where: Bug Lists.          Where to send your bug report.
* Reporting: Bug Reporting.  How to report a bug effectively.
* Patches: Sending Patches.  How to send a patch for GNU Fortran.

   *Note Known Causes of Trouble with GNU Fortran: Trouble, for
information on problems we already know about.

   *Note How To Get Help with GNU Fortran: Service, for information on
where to ask for help.


File: g77,  Node: Bug Criteria,  Next: Bug Lists,  Up: Bugs

20.1 Have You Found a Bug?
==========================

   If you are not sure whether you have found a bug, here are some
guidelines:

   * If the compiler gets a fatal signal, for any input whatever, that
     is a compiler bug.  Reliable compilers never crash--they just
     remain obsolete.

   * If the compiler produces invalid assembly code, for any input
     whatever, that is a compiler bug, unless the compiler reports
     errors (not just warnings) which would ordinarily prevent the
     assembler from being run.

   * If the compiler produces valid assembly code that does not
     correctly execute the input source code, that is a compiler bug.

     However, you must double-check to make sure, because you might
     have run into an incompatibility between GNU Fortran and
     traditional Fortran.  These incompatibilities might be considered
     bugs, but they are inescapable consequences of valuable features.

     Or you might have a program whose behavior is undefined, which
     happened by chance to give the desired results with another
     Fortran compiler.  It is best to check the relevant Fortran
     standard thoroughly if it is possible that the program indeed does
     something undefined.

     After you have localized the error to a single source line, it
     should be easy to check for these things.  If your program is
     correct and well defined, you have found a compiler bug.

     It might help if, in your submission, you identified the specific
     language in the relevant Fortran standard that specifies the
     desired behavior, if it isn't likely to be obvious and agreed-upon
     by all Fortran users.

   * If the compiler produces an error message for valid input, that is
     a compiler bug.

   * If the compiler does not produce an error message for invalid
     input, that is a compiler bug.  However, you should note that your
     idea of "invalid input" might be someone else's idea of "an
     extension" or "support for traditional practice".

   * If you are an experienced user of Fortran compilers, your
     suggestions for improvement of GNU Fortran are welcome in any case.

   Many, perhaps most, bug reports against `g77' turn out to be bugs in
the user's code.  While we find such bug reports educational, they
sometimes take a considerable amount of time to track down or at least
respond to--time we could be spending making `g77', not some user's
code, better.

   Some steps you can take to verify that the bug is not certainly in
the code you're compiling with `g77':

   * Compile your code using the `g77' options `-W -Wall -O'.  These
     options enable many useful warning; the `-O' option enables flow
     analysis that enables the uninitialized-variable warning.

     If you investigate the warnings and find evidence of possible bugs
     in your code, fix them first and retry `g77'.

   * Compile your code using the `g77' options `-finit-local-zero',
     `-fno-automatic', `-ffloat-store', and various combinations
     thereof.

     If your code works with any of these combinations, that is not
     proof that the bug isn't in `g77'--a `g77' bug exposed by your
     code might simply be avoided, or have a different, more subtle
     effect, when different options are used--but it can be a strong
     indicator that your code is making unwarranted assumptions about
     the Fortran dialect and/or underlying machine it is being compiled
     and run on.

     *Note Overly Convenient Command-Line Options: Overly Convenient
     Options, for information on the `-fno-automatic' and
     `-finit-local-zero' options and how to convert their use into
     selective changes in your own code.

   * Validate your code with `ftnchek' or a similar code-checking tool.
     `ftnchek' can be found at `ftp://ftp.netlib.org/fortran' or
     `ftp://ftp.dsm.fordham.edu'.

     Here are some sample `Makefile' rules using `ftnchek' "project"
     files to do cross-file checking and `sfmakedepend' (from
     `ftp://ahab.rutgers.edu/pub/perl/sfmakedepend') to maintain
     dependencies automatically.  These assume the use of GNU `make'.

          # Dummy suffix for ftnchek targets:
          .SUFFIXES: .chek
          .PHONY: chekall
          
          # How to compile .f files (for implicit rule):
          FC = g77
          # Assume `include' directory:
          FFLAGS = -Iinclude -g -O -Wall
          
          # Flags for ftnchek:
          CHEK1 = -array=0 -include=includes -noarray
          CHEK2 = -nonovice -usage=1 -notruncation
          CHEKFLAGS = $(CHEK1) $(CHEK2)
          
          # Run ftnchek with all the .prj files except the one corresponding
          # to the target's root:
          %.chek : %.f ; \
            ftnchek $(filter-out $*.prj,$(PRJS)) $(CHEKFLAGS) \
              -noextern -library $<
          
          # Derive a project file from a source file:
          %.prj : %.f ; \
            ftnchek $(CHEKFLAGS) -noextern -project -library $<
          
          # The list of objects is assumed to be in variable OBJS.
          # Sources corresponding to the objects:
          SRCS = $(OBJS:%.o=%.f)
          # ftnchek project files:
          PRJS = $(OBJS:%.o=%.prj)
          
          # Build the program
          prog: $(OBJS) ; \
            $(FC) -o $ $(OBJS)
          
          chekall: $(PRJS) ; \
            ftnchek $(CHEKFLAGS) $(PRJS)
          
          prjs: $(PRJS)
          
          # For Emacs M-x find-tag:
          TAGS: $(SRCS) ; \
            etags $(SRCS)
          
          # Rebuild dependencies:
          depend: ; \
            sfmakedepend -I $(PLTLIBDIR) -I includes -a prj $(SRCS1)

   * Try your code out using other Fortran compilers, such as `f2c'.
     If it does not work on at least one other compiler (assuming the
     compiler supports the features the code needs), that is a strong
     indicator of a bug in the code.

     However, even if your code works on many compilers _except_ `g77',
     that does _not_ mean the bug is in `g77'.  It might mean the bug
     is in your code, and that `g77' simply exposes it more readily
     than other compilers.


File: g77,  Node: Bug Lists,  Next: Bug Reporting,  Prev: Bug Criteria,  Up: Bugs

20.2 Where to Report Bugs
=========================

   Send bug reports for GNU Fortran to <gcc-bugs@gcc.gnu.org or
bug-gcc@gnu.org>.

   Often people think of posting bug reports to a newsgroup instead of
mailing them.  This sometimes appears to work, but it has one problem
which can be crucial: a newsgroup posting does not contain a mail path
back to the sender.  Thus, if maintainers need more information, they
might be unable to reach you.  For this reason, you should always send
bug reports by mail to the proper mailing list.

   As a last resort, send bug reports on paper to:

     GNU Compiler Bugs
     Free Software Foundation
     59 Temple Place - Suite 330
     Boston, MA 02111-1307, USA


File: g77,  Node: Bug Reporting,  Next: Sending Patches,  Prev: Bug Lists,  Up: Bugs

20.3 How to Report Bugs
=======================

   The fundamental principle of reporting bugs usefully is this:
*report all the facts*.  If you are not sure whether to state a fact or
leave it out, state it!

   Often people omit facts because they think they know what causes the
problem and they conclude that some details don't matter.  Thus, you
might assume that the name of the variable you use in an example does
not matter.  Well, probably it doesn't, but one cannot be sure.
Perhaps the bug is a stray memory reference which happens to fetch from
the location where that name is stored in memory; perhaps, if the name
were different, the contents of that location would fool the compiler
into doing the right thing despite the bug.  Play it safe and give a
specific, complete example.  That is the easiest thing for you to do,
and the most helpful.

   Keep in mind that the purpose of a bug report is to enable someone to
fix the bug if it is not known.  It isn't very important what happens if
the bug is already known.  Therefore, always write your bug reports on
the assumption that the bug is not known.

   Sometimes people give a few sketchy facts and ask, "Does this ring a
bell?"  This cannot help us fix a bug, so it is rarely helpful.  We
respond by asking for enough details to enable us to investigate.  You
might as well expedite matters by sending them to begin with.
(Besides, there are enough bells ringing around here as it is.)

   Try to make your bug report self-contained.  If we have to ask you
for more information, it is best if you include all the previous
information in your response, as well as the information that was
missing.

   Please report each bug in a separate message.  This makes it easier
for us to track which bugs have been fixed and to forward your bugs
reports to the appropriate maintainer.

   Do not compress and encode any part of your bug report using programs
such as `uuencode'.  If you do so it will slow down the processing of
your bug.  If you must submit multiple large files, use `shar', which
allows us to read your message without having to run any decompression
programs.

   (As a special exception for GNU Fortran bug-reporting, at least for
now, if you are sending more than a few lines of code, if your
program's source file format contains "interesting" things like
trailing spaces or strange characters, or if you need to include binary
data files, it is acceptable to put all the files together in a `tar'
archive, and, whether you need to do that, it is acceptable to then
compress the single file (`tar' archive or source file) using `gzip'
and encode it via `uuencode'.  Do not use any MIME stuff--the current
maintainer can't decode this.  Using `compress' instead of `gzip' is
acceptable, assuming you have licensed the use of the patented
algorithm in `compress' from Unisys.)

   To enable someone to investigate the bug, you should include all
these things:

   * The version of GNU Fortran.  You can get this by running `g77'
     with the `-v' option.  (Ignore any error messages that might be
     displayed when the linker is run.)

     Without this, we won't know whether there is any point in looking
     for the bug in the current version of GNU Fortran.

   * A complete input file that will reproduce the bug.

     If your source file(s) require preprocessing (for example, their
     names have suffixes like `.F', `.fpp', `.FPP', and `.r'), and the
     bug is in the compiler proper (`f771') or in a subsequent phase of
     processing, run your source file through the C preprocessor by
     doing `g77 -E SOURCEFILE > NEWFILE'.  Then, include the contents
     of NEWFILE in the bug report.  (When you do this, use the same
     preprocessor options--such as `-I', `-D', and `-U'--that you used
     in actual compilation.)

     A single statement is not enough of an example.  In order to
     compile it, it must be embedded in a complete file of compiler
     input.  The bug might depend on the details of how this is done.

     Without a real example one can compile, all anyone can do about
     your bug report is wish you luck.  It would be futile to try to
     guess how to provoke the bug.  For example, bugs in register
     allocation and reloading can depend on every little detail of the
     source and include files that trigger them.

   * Note that you should include with your bug report any files
     included by the source file (via the `#include' or `INCLUDE'
     directive) that you send, and any files they include, and so on.

     It is not necessary to replace the `#include' and `INCLUDE'
     directives with the actual files in the version of the source file
     that you send, but it might make submitting the bug report easier
     in the end.  However, be sure to _reproduce_ the bug using the
     _exact_ version of the source material you submit, to avoid
     wild-goose chases.

   * The command arguments you gave GNU Fortran to compile that example
     and observe the bug.  For example, did you use `-O'?  To guarantee
     you won't omit something important, list all the options.

     If we were to try to guess the arguments, we would probably guess
     wrong and then we would not encounter the bug.

   * The type of machine you are using, and the operating system name
     and version number.  (Much of this information is printed by `g77
     -v'--if you include that, send along any additional info you have
     that you don't see clearly represented in that output.)

   * The operands you gave to the `configure' command when you installed
     the compiler.

   * A complete list of any modifications you have made to the compiler
     source.  (We don't promise to investigate the bug unless it
     happens in an unmodified compiler.  But if you've made
     modifications and don't tell us, then you are sending us on a
     wild-goose chase.)

     Be precise about these changes.  A description in English is not
     enough--send a context diff for them.

     Adding files of your own (such as a machine description for a
     machine we don't support) is a modification of the compiler source.

   * Details of any other deviations from the standard procedure for
     installing GNU Fortran.

   * A description of what behavior you observe that you believe is
     incorrect.  For example, "The compiler gets a fatal signal," or,
     "The assembler instruction at line 208 in the output is incorrect."

     Of course, if the bug is that the compiler gets a fatal signal,
     then one can't miss it.  But if the bug is incorrect output, the
     maintainer might not notice unless it is glaringly wrong.  None of
     us has time to study all the assembler code from a 50-line Fortran
     program just on the chance that one instruction might be wrong.
     We need _you_ to do this part!

     Even if the problem you experience is a fatal signal, you should
     still say so explicitly.  Suppose something strange is going on,
     such as, your copy of the compiler is out of synch, or you have
     encountered a bug in the C library on your system.  (This has
     happened!)  Your copy might crash and the copy here would not.  If
     you said to expect a crash, then when the compiler here fails to
     crash, we would know that the bug was not happening.  If you don't
     say to expect a crash, then we would not know whether the bug was
     happening.  We would not be able to draw any conclusion from our
     observations.

     If the problem is a diagnostic when building GNU Fortran with some
     other compiler, say whether it is a warning or an error.

     Often the observed symptom is incorrect output when your program
     is run.  Sad to say, this is not enough information unless the
     program is short and simple.  None of us has time to study a large
     program to figure out how it would work if compiled correctly,
     much less which line of it was compiled wrong.  So you will have
     to do that.  Tell us which source line it is, and what incorrect
     result happens when that line is executed.  A person who
     understands the program can find this as easily as finding a bug
     in the program itself.

   * If you send examples of assembler code output from GNU Fortran,
     please use `-g' when you make them.  The debugging information
     includes source line numbers which are essential for correlating
     the output with the input.

   * If you wish to mention something in the GNU Fortran source, refer
     to it by context, not by line number.

     The line numbers in the development sources don't match those in
     your sources.  Your line numbers would convey no convenient
     information to the maintainers.

   * Additional information from a debugger might enable someone to
     find a problem on a machine which he does not have available.
     However, you need to think when you collect this information if
     you want it to have any chance of being useful.

     For example, many people send just a backtrace, but that is never
     useful by itself.  A simple backtrace with arguments conveys little
     about GNU Fortran because the compiler is largely data-driven; the
     same functions are called over and over for different RTL insns,
     doing different things depending on the details of the insn.

     Most of the arguments listed in the backtrace are useless because
     they are pointers to RTL list structure.  The numeric values of the
     pointers, which the debugger prints in the backtrace, have no
     significance whatever; all that matters is the contents of the
     objects they point to (and most of the contents are other such
     pointers).

     In addition, most compiler passes consist of one or more loops that
     scan the RTL insn sequence.  The most vital piece of information
     about such a loop--which insn it has reached--is usually in a
     local variable, not in an argument.

     What you need to provide in addition to a backtrace are the values
     of the local variables for several stack frames up.  When a local
     variable or an argument is an RTX, first print its value and then
     use the GDB command `pr' to print the RTL expression that it points
     to.  (If GDB doesn't run on your machine, use your debugger to call
     the function `debug_rtx' with the RTX as an argument.)  In
     general, whenever a variable is a pointer, its value is no use
     without the data it points to.

   Here are some things that are not necessary:

   * A description of the envelope of the bug.

     Often people who encounter a bug spend a lot of time investigating
     which changes to the input file will make the bug go away and which
     changes will not affect it.

     This is often time consuming and not very useful, because the way
     we will find the bug is by running a single example under the
     debugger with breakpoints, not by pure deduction from a series of
     examples.  You might as well save your time for something else.

     Of course, if you can find a simpler example to report _instead_ of
     the original one, that is a convenience.  Errors in the output
     will be easier to spot, running under the debugger will take less
     time, etc.  Most GNU Fortran bugs involve just one function, so
     the most straightforward way to simplify an example is to delete
     all the function definitions except the one where the bug occurs.
     Those earlier in the file may be replaced by external declarations
     if the crucial function depends on them.  (Exception: inline
     functions might affect compilation of functions defined later in
     the file.)

     However, simplification is not vital; if you don't want to do this,
     report the bug anyway and send the entire test case you used.

   * In particular, some people insert conditionals `#ifdef BUG' around
     a statement which, if removed, makes the bug not happen.  These
     are just clutter; we won't pay any attention to them anyway.
     Besides, you should send us preprocessor output, and that can't
     have conditionals.

   * A patch for the bug.

     A patch for the bug is useful if it is a good one.  But don't omit
     the necessary information, such as the test case, on the
     assumption that a patch is all we need.  We might see problems
     with your patch and decide to fix the problem another way, or we
     might not understand it at all.

     Sometimes with a program as complicated as GNU Fortran it is very
     hard to construct an example that will make the program follow a
     certain path through the code.  If you don't send the example, we
     won't be able to construct one, so we won't be able to verify that
     the bug is fixed.

     And if we can't understand what bug you are trying to fix, or why
     your patch should be an improvement, we won't install it.  A test
     case will help us to understand.

     *Note Sending Patches::, for guidelines on how to make it easy for
     us to understand and install your patches.

   * A guess about what the bug is or what it depends on.

     Such guesses are usually wrong.  Even the maintainer can't guess
     right about such things without first using the debugger to find
     the facts.

   * A core dump file.

     We have no way of examining a core dump for your type of machine
     unless we have an identical system--and if we do have one, we
     should be able to reproduce the crash ourselves.


File: g77,  Node: Sending Patches,  Prev: Bug Reporting,  Up: Bugs

20.4 Sending Patches for GNU Fortran
====================================

   If you would like to write bug fixes or improvements for the GNU
Fortran compiler, that is very helpful.  Send suggested fixes to the
bug report mailing list, <gcc-bugs@gcc.gnu.org or bug-gcc@gnu.org>.

   Please follow these guidelines so we can study your patches
efficiently.  If you don't follow these guidelines, your information
might still be useful, but using it will take extra work.  Maintaining
GNU Fortran is a lot of work in the best of circumstances, and we can't
keep up unless you do your best to help.

   * Send an explanation with your changes of what problem they fix or
     what improvement they bring about.  For a bug fix, just include a
     copy of the bug report, and explain why the change fixes the bug.

     (Referring to a bug report is not as good as including it, because
     then we will have to look it up, and we have probably already
     deleted it if we've already fixed the bug.)

   * Always include a proper bug report for the problem you think you
     have fixed.  We need to convince ourselves that the change is
     right before installing it.  Even if it is right, we might have
     trouble judging it if we don't have a way to reproduce the problem.

   * Include all the comments that are appropriate to help people
     reading the source in the future understand why this change was
     needed.

   * Don't mix together changes made for different reasons.  Send them
     _individually_.

     If you make two changes for separate reasons, then we might not
     want to install them both.  We might want to install just one.  If
     you send them all jumbled together in a single set of diffs, we
     have to do extra work to disentangle them--to figure out which
     parts of the change serve which purpose.  If we don't have time
     for this, we might have to ignore your changes entirely.

     If you send each change as soon as you have written it, with its
     own explanation, then the two changes never get tangled up, and we
     can consider each one properly without any extra work to
     disentangle them.

     Ideally, each change you send should be impossible to subdivide
     into parts that we might want to consider separately, because each
     of its parts gets its motivation from the other parts.

   * Send each change as soon as that change is finished.  Sometimes
     people think they are helping us by accumulating many changes to
     send them all together.  As explained above, this is absolutely
     the worst thing you could do.

     Since you should send each change separately, you might as well
     send it right away.  That gives us the option of installing it
     immediately if it is important.

   * Use `diff -c' to make your diffs.  Diffs without context are hard
     for us to install reliably.  More than that, they make it hard for
     us to study the diffs to decide whether we want to install them.
     Unidiff format is better than contextless diffs, but not as easy
     to read as `-c' format.

     If you have GNU `diff', use `diff -cp', which shows the name of the
     function that each change occurs in.  (The maintainer of GNU
     Fortran currently uses `diff -rcp2N'.)

   * Write the change log entries for your changes.  We get lots of
     changes, and we don't have time to do all the change log writing
     ourselves.

     Read the `ChangeLog' file to see what sorts of information to put
     in, and to learn the style that we use.  The purpose of the change
     log is to show people where to find what was changed.  So you need
     to be specific about what functions you changed; in large
     functions, it's often helpful to indicate where within the
     function the change was.

     On the other hand, once you have shown people where to find the
     change, you need not explain its purpose.  Thus, if you add a new
     function, all you need to say about it is that it is new.  If you
     feel that the purpose needs explaining, it probably does--but the
     explanation will be much more useful if you put it in comments in
     the code.

     If you would like your name to appear in the header line for who
     made the change, send us the header line.

   * When you write the fix, keep in mind that we can't install a
     change that would break other systems.

     People often suggest fixing a problem by changing
     machine-independent files such as `toplev.c' to do something
     special that a particular system needs.  Sometimes it is totally
     obvious that such changes would break GNU Fortran for almost all
     users.  We can't possibly make a change like that.  At best it
     might tell us how to write another patch that would solve the
     problem acceptably.

     Sometimes people send fixes that _might_ be an improvement in
     general--but it is hard to be sure of this.  It's hard to install
     such changes because we have to study them very carefully.  Of
     course, a good explanation of the reasoning by which you concluded
     the change was correct can help convince us.

     The safest changes are changes to the configuration files for a
     particular machine.  These are safe because they can't create new
     bugs on other machines.

     Please help us keep up with the workload by designing the patch in
     a form that is good to install.


File: g77,  Node: Service,  Next: Diagnostics,  Prev: Bugs,  Up: Top

21 How To Get Help with GNU Fortran
***********************************

   If you need help installing, using or changing GNU Fortran, there
are two ways to find it:

   * Look in the service directory for someone who might help you for a
     fee.  The service directory is found in the file named `SERVICE'
     in the GNU CC distribution.

   * Send a message to <gcc@gcc.gnu.org>.


File: g77,  Node: Diagnostics,  Next: Index,  Prev: Service,  Up: Top

22 Diagnostics
**************

   Some diagnostics produced by `g77' require sufficient explanation
that the explanations are given below, and the diagnostics themselves
identify the appropriate explanation.

   Identification uses the GNU Info format--specifically, the `info'
command that displays the explanation is given within square brackets
in the diagnostic.  For example:

     foo.f:5: Invalid statement [info -f g77 M FOOEY]

   More details about the above diagnostic is found in the `g77' Info
documentation, menu item `M', submenu item `FOOEY', which is displayed
by typing the UNIX command `info -f g77 M FOOEY'.

   Other Info readers, such as EMACS, may be just as easily used to
display the pertinent node.  In the above example, `g77' is the Info
document name, `M' is the top-level menu item to select, and, in that
node (named `Diagnostics', the name of this chapter, which is the very
text you're reading now), `FOOEY' is the menu item to select.

* Menu:

* CMPAMBIG::    Ambiguous use of intrinsic.
* EXPIMP::      Intrinsic used explicitly and implicitly.
* INTGLOB::     Intrinsic also used as name of global.
* LEX::         Various lexer messages
* GLOBALS::     Disagreements about globals.
* LINKFAIL::    When linking `f771' fails.
* Y2KBAD::      Use of non-Y2K-compliant intrinsic.


File: g77,  Node: CMPAMBIG,  Next: EXPIMP,  Up: Diagnostics

22.1 `CMPAMBIG'
===============

     Ambiguous use of intrinsic INTRINSIC ...

   The type of the argument to the invocation of the INTRINSIC
intrinsic is a `COMPLEX' type other than `COMPLEX(KIND=1)'.  Typically,
it is `COMPLEX(KIND=2)', also known as `DOUBLE COMPLEX'.

   The interpretation of this invocation depends on the particular
dialect of Fortran for which the code was written.  Some dialects
convert the real part of the argument to `REAL(KIND=1)', thus losing
precision; other dialects, and Fortran 90, do no such conversion.

   So, GNU Fortran rejects such invocations except under certain
circumstances, to avoid making an incorrect assumption that results in
generating the wrong code.

   To determine the dialect of the program unit, perhaps even whether
that particular invocation is properly coded, determine how the result
of the intrinsic is used.

   The result of INTRINSIC is expected (by the original programmer) to
be `REAL(KIND=1)' (the non-Fortran-90 interpretation) if:

   * It is passed as an argument to a procedure that explicitly or
     implicitly declares that argument `REAL(KIND=1)'.

     For example, a procedure with no `DOUBLE PRECISION' or `IMPLICIT
     DOUBLE PRECISION' statement specifying the dummy argument
     corresponding to an actual argument of `REAL(Z)', where `Z' is
     declared `DOUBLE COMPLEX', strongly suggests that the programmer
     expected `REAL(Z)' to return `REAL(KIND=1)' instead of
     `REAL(KIND=2)'.

   * It is used in a context that would otherwise not include any
     `REAL(KIND=2)' but where treating the INTRINSIC invocation as
     `REAL(KIND=2)' would result in unnecessary promotions and
     (typically) more expensive operations on the wider type.

     For example:

          DOUBLE COMPLEX Z
          ...
          R(1) = T * REAL(Z)

     The above example suggests the programmer expected the real part
     of `Z' to be converted to `REAL(KIND=1)' before being multiplied
     by `T' (presumed, along with `R' above, to be type `REAL(KIND=1)').

     Otherwise, the conversion would have to be delayed until after the
     multiplication, requiring not only an extra conversion (of `T' to
     `REAL(KIND=2)'), but a (typically) more expensive multiplication
     (a double-precision multiplication instead of a single-precision
     one).

   The result of INTRINSIC is expected (by the original programmer) to
be `REAL(KIND=2)' (the Fortran 90 interpretation) if:

   * It is passed as an argument to a procedure that explicitly or
     implicitly declares that argument `REAL(KIND=2)'.

     For example, a procedure specifying a `DOUBLE PRECISION' dummy
     argument corresponding to an actual argument of `REAL(Z)', where
     `Z' is declared `DOUBLE COMPLEX', strongly suggests that the
     programmer expected `REAL(Z)' to return `REAL(KIND=2)' instead of
     `REAL(KIND=1)'.

   * It is used in an expression context that includes other
     `REAL(KIND=2)' operands, or is assigned to a `REAL(KIND=2)'
     variable or array element.

     For example:

          DOUBLE COMPLEX Z
          DOUBLE PRECISION R, T
          ...
          R(1) = T * REAL(Z)

     The above example suggests the programmer expected the real part
     of `Z' to _not_ be converted to `REAL(KIND=1)' by the `REAL()'
     intrinsic.

     Otherwise, the conversion would have to be immediately followed by
     a conversion back to `REAL(KIND=2)', losing the original, full
     precision of the real part of `Z', before being multiplied by `T'.

   Once you have determined whether a particular invocation of INTRINSIC
expects the Fortran 90 interpretation, you can:

   * Change it to `DBLE(EXPR)' (if INTRINSIC is `REAL') or
     `DIMAG(EXPR)' (if INTRINSIC is `AIMAG') if it expected the Fortran
     90 interpretation.

     This assumes EXPR is `COMPLEX(KIND=2)'--if it is some other type,
     such as `COMPLEX*32', you should use the appropriate intrinsic,
     such as the one to convert to `REAL*16' (perhaps `DBLEQ()' in
     place of `DBLE()', and `QIMAG()' in place of `DIMAG()').

   * Change it to `REAL(INTRINSIC(EXPR))', otherwise.  This converts to
     `REAL(KIND=1)' in all working Fortran compilers.

   If you don't want to change the code, and you are certain that all
ambiguous invocations of INTRINSIC in the source file have the same
expectation regarding interpretation, you can:

   * Compile with the `g77' option `-ff90', to enable the Fortran 90
     interpretation.

   * Compile with the `g77' options `-fno-f90 -fugly-complex', to
     enable the non-Fortran-90 interpretations.

   *Note REAL() and AIMAG() of Complex::, for more information on this
issue.

   Note: If the above suggestions don't produce enough evidence as to
whether a particular program expects the Fortran 90 interpretation of
this ambiguous invocation of INTRINSIC, there is one more thing you can
try.

   If you have access to most or all the compilers used on the program
to create successfully tested and deployed executables, read the
documentation for, and _also_ test out, each compiler to determine how
it treats the INTRINSIC intrinsic in this case.  (If all the compilers
don't agree on an interpretation, there might be lurking bugs in the
deployed versions of the program.)

   The following sample program might help:

           PROGRAM JCB003
     C
     C Written by James Craig Burley 1997-02-23.
     C
     C Determine how compilers handle non-standard REAL
     C and AIMAG on DOUBLE COMPLEX operands.
     C
           DOUBLE COMPLEX Z
           REAL R
           Z = (3.3D0, 4.4D0)
           R = Z
           CALL DUMDUM(Z, R)
           R = REAL(Z) - R
           IF (R .NE. 0.) PRINT *, 'REAL() is Fortran 90'
           IF (R .EQ. 0.) PRINT *, 'REAL() is not Fortran 90'
           R = 4.4D0
           CALL DUMDUM(Z, R)
           R = AIMAG(Z) - R
           IF (R .NE. 0.) PRINT *, 'AIMAG() is Fortran 90'
           IF (R .EQ. 0.) PRINT *, 'AIMAG() is not Fortran 90'
           END
     C
     C Just to make sure compiler doesn't use naive flow
     C analysis to optimize away careful work above,
     C which might invalidate results....
     C
           SUBROUTINE DUMDUM(Z, R)
           DOUBLE COMPLEX Z
           REAL R
           END

   If the above program prints contradictory results on a particular
compiler, run away!


File: g77,  Node: EXPIMP,  Next: INTGLOB,  Prev: CMPAMBIG,  Up: Diagnostics

22.2 `EXPIMP'
=============

     Intrinsic INTRINSIC referenced ...

   The INTRINSIC is explicitly declared in one program unit in the
source file and implicitly used as an intrinsic in another program unit
in the same source file.

   This diagnostic is designed to catch cases where a program might
depend on using the name INTRINSIC as an intrinsic in one program unit
and as a global name (such as the name of a subroutine or function) in
another, but `g77' recognizes the name as an intrinsic in both cases.

   After verifying that the program unit making implicit use of the
intrinsic is indeed written expecting the intrinsic, add an `INTRINSIC
INTRINSIC' statement to that program unit to prevent this warning.

   This and related warnings are disabled by using the `-Wno-globals'
option when compiling.

   Note that this warning is not issued for standard intrinsics.
Standard intrinsics include those described in the FORTRAN 77 standard
and, if `-ff90' is specified, those described in the Fortran 90
standard.  Such intrinsics are not as likely to be confused with user
procedures as intrinsics provided as extensions to the standard by
`g77'.


File: g77,  Node: INTGLOB,  Next: LEX,  Prev: EXPIMP,  Up: Diagnostics

22.3 `INTGLOB'
==============

     Same name `INTRINSIC' given ...

   The name INTRINSIC is used for a global entity (a common block or a
program unit) in one program unit and implicitly used as an intrinsic
in another program unit.

   This diagnostic is designed to catch cases where a program intends
to use a name entirely as a global name, but `g77' recognizes the name
as an intrinsic in the program unit that references the name, a
situation that would likely produce incorrect code.

   For example:

     INTEGER FUNCTION TIME()
     ...
     END
     ...
     PROGRAM SAMP
     INTEGER TIME
     PRINT *, 'Time is ', TIME()
     END

   The above example defines a program unit named `TIME', but the
reference to `TIME' in the main program unit `SAMP' is normally treated
by `g77' as a reference to the intrinsic `TIME()' (unless a
command-line option that prevents such treatment has been specified).

   As a result, the program `SAMP' will _not_ invoke the `TIME'
function in the same source file.

   Since `g77' recognizes `libU77' procedures as intrinsics, and since
some existing code uses the same names for its own procedures as used
by some `libU77' procedures, this situation is expected to arise often
enough to make this sort of warning worth issuing.

   After verifying that the program unit making implicit use of the
intrinsic is indeed written expecting the intrinsic, add an `INTRINSIC
INTRINSIC' statement to that program unit to prevent this warning.

   Or, if you believe the program unit is designed to invoke the
program-defined procedure instead of the intrinsic (as recognized by
`g77'), add an `EXTERNAL INTRINSIC' statement to the program unit that
references the name to prevent this warning.

   This and related warnings are disabled by using the `-Wno-globals'
option when compiling.

   Note that this warning is not issued for standard intrinsics.
Standard intrinsics include those described in the FORTRAN 77 standard
and, if `-ff90' is specified, those described in the Fortran 90
standard.  Such intrinsics are not as likely to be confused with user
procedures as intrinsics provided as extensions to the standard by
`g77'.


File: g77,  Node: LEX,  Next: GLOBALS,  Prev: INTGLOB,  Up: Diagnostics

22.4 `LEX'
==========

     Unrecognized character ...
     Invalid first character ...
     Line too long ...
     Non-numeric character ...
     Continuation indicator ...
     Label at ... invalid with continuation line indicator ...
     Character constant ...
     Continuation line ...
     Statement at ... begins with invalid token

   Although the diagnostics identify specific problems, they can be
produced when general problems such as the following occur:

   * The source file contains something other than Fortran code.

     If the code in the file does not look like many of the examples
     elsewhere in this document, it might not be Fortran code.  (Note
     that Fortran code often is written in lower case letters, while
     the examples in this document use upper case letters, for
     stylistic reasons.)

     For example, if the file contains lots of strange-looking
     characters, it might be APL source code; if it contains lots of
     parentheses, it might be Lisp source code; if it contains lots of
     bugs, it might be C++ source code.

   * The source file contains free-form Fortran code, but `-ffree-form'
     was not specified on the command line to compile it.

     Free form is a newer form for Fortran code.  The older, classic
     form is called fixed form.

     Fixed-form code is visually fairly distinctive, because numerical
     labels and comments are all that appear in the first five columns
     of a line, the sixth column is reserved to denote continuation
     lines, and actual statements start at or beyond column 7.  Spaces
     generally are not significant, so if you see statements such as
     `REALX,Y' and `DO10I=1,100', you are looking at fixed-form code.
     Comment lines are indicated by the letter `C' or the symbol `*' in
     column 1.  (Some code uses `!' or `/*' to begin in-line comments,
     which many compilers support.)

     Free-form code is distinguished from fixed-form source primarily
     by the fact that statements may start anywhere.  (If lots of
     statements start in columns 1 through 6, that's a strong indicator
     of free-form source.)  Consecutive keywords must be separated by
     spaces, so `REALX,Y' is not valid, while `REAL X,Y' is.  There are
     no comment lines per se, but `!' starts a comment anywhere in a
     line (other than within a character or Hollerith constant).

     *Note Source Form::, for more information.

   * The source file is in fixed form and has been edited without
     sensitivity to the column requirements.

     Statements in fixed-form code must be entirely contained within
     columns 7 through 72 on a given line.  Starting them "early" is
     more likely to result in diagnostics than finishing them "late",
     though both kinds of errors are often caught at compile time.

     For example, if the following code fragment is edited by following
     the commented instructions literally, the result, shown afterward,
     would produce a diagnostic when compiled:

          C On XYZZY systems, remove "C" on next line:
          C     CALL XYZZY_RESET

     The result of editing the above line might be:

          C On XYZZY systems, remove "C" on next line:
               CALL XYZZY_RESET

     However, that leaves the first `C' in the `CALL' statement in
     column 6, making it a comment line, which is not really what the
     author intended, and which is likely to result in one of the
     above-listed diagnostics.

     _Replacing_ the `C' in column 1 with a space is the proper change
     to make, to ensure the `CALL' keyword starts in or after column 7.

     Another common mistake like this is to forget that fixed-form
     source lines are significant through only column 72, and that,
     normally, any text beyond column 72 is ignored or is diagnosed at
     compile time.

     *Note Source Form::, for more information.

   * The source file requires preprocessing, and the preprocessing is
     not being specified at compile time.

     A source file containing lines beginning with `#define',
     `#include', `#if', and so on is likely one that requires
     preprocessing.

     If the file's suffix is `.f', `.for', or `.FOR', the file normally
     will be compiled _without_ preprocessing by `g77'.

     Change the file's suffix from `.f' to `.F' (or, on systems with
     case-insensitive file names, to `.fpp' or `.FPP'), from `.for' to
     `.fpp', or from `.FOR' to `.FPP'.  `g77' compiles files with such
     names _with_ preprocessing.

     Or, learn how to use `gcc''s `-x' option to specify the language
     `f77-cpp-input' for Fortran files that require preprocessing.
     *Note gcc: (Using and Porting GNU CC)Overall Options.

   * The source file is preprocessed, and the results of preprocessing
     result in syntactic errors that are not necessarily obvious to
     someone examining the source file itself.

     Examples of errors resulting from preprocessor macro expansion
     include exceeding the line-length limit, improperly starting,
     terminating, or incorporating the apostrophe or double-quote in a
     character constant, improperly forming a Hollerith constant, and
     so on.

     *Note Options Controlling the Kind of Output: Overall Options, for
     suggestions about how to use, and not use, preprocessing for
     Fortran code.


File: g77,  Node: GLOBALS,  Next: LINKFAIL,  Prev: LEX,  Up: Diagnostics

22.5 `GLOBALS'
==============

     Global name NAME defined at ... already defined...
     Global name NAME at ... has different type...
     Too many arguments passed to NAME at ...
     Too few arguments passed to NAME at ...
     Argument #N of NAME is ...

   These messages all identify disagreements about the global procedure
named NAME among different program units (usually including NAME
itself).

   Whether a particular disagreement is reported as a warning or an
error can depend on the relative order of the disagreeing portions of
the source file.

   Disagreements between a procedure invocation and the _subsequent_
procedure itself are, usually, diagnosed as errors when the procedure
itself _precedes_ the invocation.  Other disagreements are diagnosed
via warnings.

   This distinction, between warnings and errors, is due primarily to
the present tendency of the `gcc' back end to inline only those
procedure invocations that are _preceded_ by the corresponding
procedure definitions.  If the `gcc' back end is changed to inline
"forward references", in which invocations precede definitions, the
`g77' front end will be changed to treat both orderings as errors,
accordingly.

   The sorts of disagreements that are diagnosed by `g77' include
whether a procedure is a subroutine or function; if it is a function,
the type of the return value of the procedure; the number of arguments
the procedure accepts; and the type of each argument.

   Disagreements regarding global names among program units in a
Fortran program _should_ be fixed in the code itself.  However, if that
is not immediately practical, and the code has been working for some
time, it is possible it will work when compiled with the `-fno-globals'
option.

   The `-fno-globals' option causes these diagnostics to all be warnings
and disables all inlining of references to global procedures (to avoid
subsequent compiler crashes and bad-code generation).  Use of the
`-Wno-globals' option as well as `-fno-globals' suppresses all of these
diagnostics.  (`-Wno-globals' by itself disables only the warnings, not
the errors.)

   After using `-fno-globals' to work around these problems, it is wise
to stop using that option and address them by fixing the Fortran code,
because such problems, while they might not actually result in bugs on
some systems, indicate that the code is not as portable as it could be.
In particular, the code might appear to work on a particular system,
but have bugs that affect the reliability of the data without
exhibiting any other outward manifestations of the bugs.


File: g77,  Node: LINKFAIL,  Next: Y2KBAD,  Prev: GLOBALS,  Up: Diagnostics

22.6 `LINKFAIL'
===============

     If the above command failed due to an unresolved reference
     to strtoul, _strtoul, bsearch, _bsearch, or similar, see
     [info -f g77 M LINKFAIL] (a node in the g77 documentation)
     for information on what causes this, how to work around
     the problem by editing ${srcdir}/proj.c, and what else to do.

   *Note Missing strtoul or bsearch::, for more information on this
problem, which occurs only in releases of `g77' based on `gcc'.  (It
does not occur in `egcs'.)

   On AIX 4.1, `g77' might not build with the native (non-GNU) tools
due to a linker bug in coping with the `-bbigtoc' option which leads to
a `Relocation overflow' error.  The GNU linker is not recommended on
current AIX versions, though; it was developed under a now-unsupported
version.  This bug is said to be fixed by `update PTF U455193 for APAR
IX75823'.

   Compiling with `-mminimal-toc' might solve this problem, e.g. by
adding
     BOOT_CFLAGS='-mminimal-toc -O2 -g'
   to the `make bootstrap' command line.


File: g77,  Node: Y2KBAD,  Prev: LINKFAIL,  Up: Diagnostics

22.7 `Y2KBAD'
=============

     Intrinsic `NAME', invoked at (^), known to be non-Y2K-compliant...

   This diagnostic indicates that the specific intrinsic invoked by the
name NAME is known to have an interface that is not Year-2000 (Y2K)
compliant.

   *Note Year 2000 (Y2K) Problems::.


File: g77,  Node: Index,  Prev: Diagnostics,  Up: Top

Index
*****

* Menu:

* ! <1>:                                 LEX.
* ! <2>:                                 Exclamation Point.
* ! <3>:                                 Trailing Comment.
* ! <4>:                                 Character Set.
* !:                                     Statements Comments Lines.
* ":                                     Character Set.
* # <1>:                                 Cpp-style directives.
* #:                                     Character Set.
* #define:                               Overall Options.
* #if:                                   Overall Options.
* #include:                              Overall Options.
* #include directive:                    Bug Reporting.
* $:                                     Dollar Signs.
* %:                                     Character Set.
* %DESCR() construct:                    %DESCR().
* %LOC() construct:                      %LOC().
* %REF() construct:                      %REF().
* %VAL() construct:                      %VAL().
* &:                                     Character Set.
* *:                                     LEX.
* *N notation <1>:                       Compiler Types.
* *N notation:                           Star Notation.
* --driver option <1>:                   Changes.
* --driver option:                       News.
* -falias-check option <1>:              Aliasing Assumed To Work.
* -falias-check option:                  Code Gen Options.
* -fargument-alias option <1>:           Aliasing Assumed To Work.
* -fargument-alias option:               Code Gen Options.
* -fargument-noalias option <1>:         Aliasing Assumed To Work.
* -fargument-noalias option:             Code Gen Options.
* -fbadu77-intrinsics-delete option:     Fortran Dialect Options.
* -fbadu77-intrinsics-disable option:    Fortran Dialect Options.
* -fbadu77-intrinsics-enable option:     Fortran Dialect Options.
* -fbadu77-intrinsics-hide option:       Fortran Dialect Options.
* -fbounds-check option:                 Code Gen Options.
* -fcaller-saves option:                 Optimize Options.
* -fcase-initcap option:                 Fortran Dialect Options.
* -fcase-lower option:                   Fortran Dialect Options.
* -fcase-preserve option:                Fortran Dialect Options.
* -fcase-strict-lower option:            Fortran Dialect Options.
* -fcase-strict-upper option:            Fortran Dialect Options.
* -fcase-upper option:                   Fortran Dialect Options.
* -fdebug-kludge option:                 Code Gen Options.
* -fdelayed-branch option:               Optimize Options.
* -fdollar-ok option:                    Fortran Dialect Options.
* -femulate-complex option:              Code Gen Options.
* -fexpensive-optimizations option:      Optimize Options.
* -ff2c-intrinsics-delete option:        Fortran Dialect Options.
* -ff2c-intrinsics-disable option:       Fortran Dialect Options.
* -ff2c-intrinsics-enable option:        Fortran Dialect Options.
* -ff2c-intrinsics-hide option:          Fortran Dialect Options.
* -ff2c-library option:                  Code Gen Options.
* -ff66 option:                          Shorthand Options.
* -ff77 option:                          Shorthand Options.
* -ff90:                                 Fortran 90 Features.
* -ff90 option:                          Fortran Dialect Options.
* -ff90-intrinsics-delete option:        Fortran Dialect Options.
* -ff90-intrinsics-disable option:       Fortran Dialect Options.
* -ff90-intrinsics-enable option:        Fortran Dialect Options.
* -ff90-intrinsics-hide option:          Fortran Dialect Options.
* -ffast-math option:                    Optimize Options.
* -ffixed-line-length-N option:          Fortran Dialect Options.
* -fflatten-arrays option:               Code Gen Options.
* -ffloat-store option:                  Optimize Options.
* -fforce-addr option:                   Optimize Options.
* -fforce-mem option:                    Optimize Options.
* -ffortran-bounds-check option:         Code Gen Options.
* -ffree-form:                           Fortran 90 Features.
* -ffree-form option:                    Fortran Dialect Options.
* -fgnu-intrinsics-delete option:        Fortran Dialect Options.
* -fgnu-intrinsics-disable option:       Fortran Dialect Options.
* -fgnu-intrinsics-enable option:        Fortran Dialect Options.
* -fgnu-intrinsics-hide option:          Fortran Dialect Options.
* -fGROUP-intrinsics-hide option:        Overly Convenient Options.
* -finit-local-zero option <1>:          Overly Convenient Options.
* -finit-local-zero option:              Code Gen Options.
* -fintrin-case-any option:              Fortran Dialect Options.
* -fintrin-case-initcap option:          Fortran Dialect Options.
* -fintrin-case-lower option:            Fortran Dialect Options.
* -fintrin-case-upper option:            Fortran Dialect Options.
* -fmatch-case-any option:               Fortran Dialect Options.
* -fmatch-case-initcap option:           Fortran Dialect Options.
* -fmatch-case-lower option:             Fortran Dialect Options.
* -fmatch-case-upper option:             Fortran Dialect Options.
* -fmil-intrinsics-delete option:        Fortran Dialect Options.
* -fmil-intrinsics-disable option:       Fortran Dialect Options.
* -fmil-intrinsics-enable option:        Fortran Dialect Options.
* -fmil-intrinsics-hide option:          Fortran Dialect Options.
* -fno-argument-noalias-global option <1>: Aliasing Assumed To Work.
* -fno-argument-noalias-global option:   Code Gen Options.
* -fno-automatic option <1>:             Overly Convenient Options.
* -fno-automatic option:                 Code Gen Options.
* -fno-backslash option:                 Fortran Dialect Options.
* -fno-common option:                    Code Gen Options.
* -fno-f2c option <1>:                   Avoid f2c Compatibility.
* -fno-f2c option:                       Code Gen Options.
* -fno-f77 option:                       Shorthand Options.
* -fno-fixed-form option:                Fortran Dialect Options.
* -fno-globals option:                   Code Gen Options.
* -fno-ident option:                     Code Gen Options.
* -fno-inline option:                    Optimize Options.
* -fno-move-all-movables option:         Optimize Options.
* -fno-reduce-all-givs option:           Optimize Options.
* -fno-rerun-loop-opt option:            Optimize Options.
* -fno-second-underscore:                f2c Skeletons and Prototypes.
* -fno-second-underscore option <1>:     Names.
* -fno-second-underscore option:         Code Gen Options.
* -fno-silent option:                    Overall Options.
* -fno-ugly option:                      Shorthand Options.
* -fno-ugly-args option:                 Fortran Dialect Options.
* -fno-ugly-init option:                 Fortran Dialect Options.
* -fno-underscoring option <1>:          Names.
* -fno-underscoring option:              Code Gen Options.
* -fonetrip option:                      Fortran Dialect Options.
* -fpack-struct option:                  Code Gen Options.
* -fpcc-struct-return option:            Code Gen Options.
* -fpedantic option:                     Warning Options.
* -fPIC option:                          News.
* -freg-struct-return option:            Code Gen Options.
* -frerun-cse-after-loop option:         Optimize Options.
* -fschedule-insns option:               Optimize Options.
* -fschedule-insns2 option:              Optimize Options.
* -fset-g77-defaults option:             Overall Options.
* -fshort-double option:                 Code Gen Options.
* -fsource-case-lower option:            Fortran Dialect Options.
* -fsource-case-preserve option:         Fortran Dialect Options.
* -fsource-case-upper option:            Fortran Dialect Options.
* -fstrength-reduce option:              Optimize Options.
* -fsymbol-case-any option:              Fortran Dialect Options.
* -fsymbol-case-initcap option:          Fortran Dialect Options.
* -fsymbol-case-lower option:            Fortran Dialect Options.
* -fsymbol-case-upper option:            Fortran Dialect Options.
* -fsyntax-only option:                  Warning Options.
* -ftypeless-boz option:                 Fortran Dialect Options.
* -fugly option:                         Shorthand Options.
* -fugly-assign option:                  Fortran Dialect Options.
* -fugly-assumed option:                 Fortran Dialect Options.
* -fugly-comma option:                   Fortran Dialect Options.
* -fugly-complex option:                 Fortran Dialect Options.
* -fugly-logint option:                  Fortran Dialect Options.
* -funix-intrinsics-delete option:       Fortran Dialect Options.
* -funix-intrinsics-disable option:      Fortran Dialect Options.
* -funix-intrinsics-enable option:       Fortran Dialect Options.
* -funix-intrinsics-hide option:         Fortran Dialect Options.
* -funroll-all-loops option:             Optimize Options.
* -funroll-loops option:                 Optimize Options.
* -fversion option:                      Overall Options.
* -fvxt option:                          Fortran Dialect Options.
* -fvxt-intrinsics-delete option:        Fortran Dialect Options.
* -fvxt-intrinsics-disable option:       Fortran Dialect Options.
* -fvxt-intrinsics-enable option:        Fortran Dialect Options.
* -fvxt-intrinsics-hide option:          Fortran Dialect Options.
* -fzeros option:                        Code Gen Options.
* -g option:                             Debugging Options.
* -I- option:                            Directory Options.
* -i8:                                   Increasing Precision/Range.
* -Idir option:                          Directory Options.
* -malign-double <1>:                    Changes.
* -malign-double:                        News.
* -malign-double option <1>:             Aligned Data.
* -malign-double option:                 Optimize Options.
* -Nl option:                            Compiler Limits.
* -Nx option:                            Compiler Limits.
* -O2:                                   News.
* -pedantic option:                      Warning Options.
* -pedantic-errors option:               Warning Options.
* -qrealsize=8:                          Increasing Precision/Range.
* -r8:                                   Increasing Precision/Range.
* -u option:                             Warning Options.
* -v option:                             G77 and GCC.
* -W option:                             Warning Options.
* -w option:                             Warning Options.
* -Waggregate-return option:             Warning Options.
* -Wall option:                          Warning Options.
* -Wcomment option:                      Warning Options.
* -Wconversion option:                   Warning Options.
* -Werror option:                        Warning Options.
* -Wformat option:                       Warning Options.
* -Wid-clash-LEN option:                 Warning Options.
* -Wimplicit option:                     Warning Options.
* -Wlarger-than-LEN option:              Warning Options.
* -Wno-globals option:                   Warning Options.
* -Wparentheses option:                  Warning Options.
* -Wredundant-decls option:              Warning Options.
* -Wshadow option:                       Warning Options.
* -Wsurprising option:                   Warning Options.
* -Wswitch option:                       Warning Options.
* -Wtraditional option:                  Warning Options.
* -Wuninitialized option:                Warning Options.
* -Wunused option:                       Warning Options.
* -x f77-cpp-input option:               LEX.
* .EQV., with integer operands:          Equivalence Versus Equality.
* .F filename suffix:                    Overall Options.
* .f filename suffix:                    Overall Options.
* .FOR filename suffix:                  Overall Options.
* .for filename suffix:                  Overall Options.
* .FPP filename suffix:                  Overall Options.
* .fpp filename suffix:                  Overall Options.
* .gdbinit:                              Main Program Unit.
* .r filename suffix:                    Overall Options.
* /* <1>:                                Trailing Comment.
* /*:                                    Overall Options.
* /WARNINGS=DECLARATIONS switch:         Warning Options.
* 64-bit systems:                        Alpha Problems Fixed.
* 80-bit spills:                         Floating-point Errors.
* ; <1>:                                 Character Set.
* ;:                                     Statements Comments Lines.
* <:                                     Character Set.
* <> edit descriptor:                    I/O.
* >:                                     Character Set.
* ?:                                     Character Set.
* \:                                     Character Set.
* _:                                     Character Set.
* _bsearch:                              Missing strtoul or bsearch.
* _strtoul:                              Missing strtoul or bsearch.
* Abort intrinsic:                       Abort Intrinsic.
* Abs intrinsic:                         Abs Intrinsic.
* ACCEPT statement:                      TYPE and ACCEPT I/O Statements.
* Access intrinsic:                      Access Intrinsic.
* AChar intrinsic:                       AChar Intrinsic.
* ACos intrinsic:                        ACos Intrinsic.
* ACosD intrinsic:                       ACosD Intrinsic.
* adjustable arrays:                     Adjustable Arrays.
* AdjustL intrinsic:                     AdjustL Intrinsic.
* AdjustR intrinsic:                     AdjustR Intrinsic.
* aggregate initialization:              Large Initialization.
* AImag intrinsic <1>:                   AImag Intrinsic.
* AImag intrinsic:                       REAL() and AIMAG() of Complex.
* AIMax0 intrinsic:                      AIMax0 Intrinsic.
* AIMin0 intrinsic:                      AIMin0 Intrinsic.
* AInt intrinsic:                        AInt Intrinsic.
* AIX:                                   System-specific Problems.
* AJMax0 intrinsic:                      AJMax0 Intrinsic.
* AJMin0 intrinsic:                      AJMin0 Intrinsic.
* Alarm intrinsic:                       Alarm Intrinsic.
* aliasing <1>:                          Known Bugs.
* aliasing:                              Aliasing Assumed To Work.
* aligned data:                          Aligned Data.
* aligned stack:                         Aligned Data.
* alignment <1>:                         Aligned Data.
* alignment <2>:                         Changes.
* alignment:                             News.
* alignment testing:                     Aligned Data.
* All intrinsic:                         All Intrinsic.
* all warnings:                          Warning Options.
* Allocated intrinsic:                   Allocated Intrinsic.
* ALog intrinsic:                        ALog Intrinsic.
* ALog10 intrinsic:                      ALog10 Intrinsic.
* Alpha, support <1>:                    Known Bugs.
* Alpha, support:                        Alpha Problems Fixed.
* alternate entry points:                Alternate Entry Points.
* alternate returns:                     Alternate Returns.
* ALWAYS_FLUSH <1>:                      Output Assumed To Flush.
* ALWAYS_FLUSH:                          Always Flush Output.
* AMax0 intrinsic:                       AMax0 Intrinsic.
* AMax1 intrinsic:                       AMax1 Intrinsic.
* AMin0 intrinsic:                       AMin0 Intrinsic.
* AMin1 intrinsic:                       AMin1 Intrinsic.
* AMod intrinsic:                        AMod Intrinsic.
* ampersand:                             Character Set.
* ampersand continuation line:           Ampersands.
* And intrinsic <1>:                     Bit Operations on Floating-point Data.
* And intrinsic:                         And Intrinsic.
* ANInt intrinsic:                       ANInt Intrinsic.
* ANS carriage control:                  OPEN CLOSE and INQUIRE Keywords.
* ANSI FORTRAN 77 standard:              Language.
* ANSI FORTRAN 77 support:               Standard Support.
* anti-aliasing:                         Aliasing Assumed To Work.
* Any intrinsic:                         Any Intrinsic.
* arguments, null:                       Ugly Null Arguments.
* arguments, omitting:                   Ugly Null Arguments.
* arguments, unused <1>:                 Unused Arguments.
* arguments, unused:                     Warning Options.
* array bounds checking:                 Code Gen Options.
* array bounds, adjustable:              Array Bounds Expressions.
* array elements, in adjustable array bounds: Array Bounds Expressions.
* array ordering:                        Arrays.
* array performance:                     Code Gen Options.
* array size:                            Array Size.
* arrays:                                Arrays.
* arrays, adjustable:                    Adjustable Arrays.
* arrays, assumed-size:                  Ugly Assumed-Size Arrays.
* arrays, automatic <1>:                 Large Automatic Arrays.
* arrays, automatic <2>:                 Stack Overflow.
* arrays, automatic <3>:                 Overly Convenient Options.
* arrays, automatic:                     Adjustable Arrays.
* arrays, dimensioning <1>:              Adjustable Arrays.
* arrays, dimensioning:                  Array Size.
* arrays, flattening:                    Code Gen Options.
* as command:                            What is GNU Fortran?.
* ASin intrinsic:                        ASin Intrinsic.
* ASinD intrinsic:                       ASinD Intrinsic.
* assembler:                             What is GNU Fortran?.
* assembly code:                         What is GNU Fortran?.
* assembly code, invalid:                Bug Criteria.
* ASSIGN statement <1>:                  Assigned Statement Labels.
* ASSIGN statement:                      Ugly Assigned Labels.
* assigned labels:                       Ugly Assigned Labels.
* assigned statement labels:             Assigned Statement Labels.
* Associated intrinsic:                  Associated Intrinsic.
* association, storage:                  Aliasing Assumed To Work.
* assumed-size arrays:                   Ugly Assumed-Size Arrays.
* asterisk:                              LEX.
* ATan intrinsic:                        ATan Intrinsic.
* ATan2 intrinsic:                       ATan2 Intrinsic.
* ATan2D intrinsic:                      ATan2D Intrinsic.
* ATanD intrinsic:                       ATanD Intrinsic.
* automatic arrays <1>:                  Large Automatic Arrays.
* automatic arrays <2>:                  Stack Overflow.
* automatic arrays <3>:                  Overly Convenient Options.
* automatic arrays:                      Adjustable Arrays.
* AUTOMATIC statement:                   AUTOMATIC Statement.
* automatic variables:                   AUTOMATIC Statement.
* back end, gcc:                         What is GNU Fortran?.
* backslash <1>:                         Backslash in Constants.
* backslash <2>:                         Character Set.
* backslash:                             Fortran Dialect Options.
* backtrace for bug reports:             Bug Reporting.
* badu77 intrinsics:                     Fortran Dialect Options.
* badu77 intrinsics group:               Intrinsic Groups.
* basic concepts:                        What is GNU Fortran?.
* beginners:                             Getting Started.
* BesJ0 intrinsic:                       BesJ0 Intrinsic.
* BesJ1 intrinsic:                       BesJ1 Intrinsic.
* BesJN intrinsic:                       BesJN Intrinsic.
* BesY0 intrinsic:                       BesY0 Intrinsic.
* BesY1 intrinsic:                       BesY1 Intrinsic.
* BesYN intrinsic:                       BesYN Intrinsic.
* binaries, distributing:                Distributing Binaries.
* binary data:                           Portable Unformatted Files.
* bit patterns:                          Floating-point Bit Patterns.
* Bit_Size intrinsic:                    Bit_Size Intrinsic.
* BITest intrinsic:                      BITest Intrinsic.
* BJTest intrinsic:                      BJTest Intrinsic.
* blank <1>:                             Lines.
* blank:                                 Character Set.
* block data:                            Multiple Definitions of External Names.
* block data and libraries:              Block Data and Libraries.
* BLOCK DATA statement <1>:              Multiple Definitions of External Names.
* BLOCK DATA statement:                  Block Data and Libraries.
* bounds checking:                       Code Gen Options.
* bsearch:                               Missing strtoul or bsearch.
* BTest intrinsic:                       BTest Intrinsic.
* bug criteria:                          Bug Criteria.
* bug report mailing lists:              Bug Lists.
* bugs:                                  Bugs.
* bugs, finding:                         What is GNU Fortran?.
* bugs, known:                           Trouble.
* building gcc:                          Building GNU CC Necessary.
* bus error <1>:                         Strange Behavior at Run Time.
* bus error:                             NeXTStep Problems.
* but-bugs:                              But-bugs.
* byte ordering:                         Portable Unformatted Files.
* C library:                             Strange Behavior at Run Time.
* C preprocessor:                        Overall Options.
* C routines calling Fortran:            Debugging and Interfacing.
* C++:                                   C++ Considerations.
* C++, linking with:                     Interoperating with C and C++.
* C, linking with:                       Interoperating with C and C++.
* CAbs intrinsic:                        CAbs Intrinsic.
* calling C routines:                    Debugging and Interfacing.
* card image:                            Fortran Dialect Options.
* carriage control:                      OPEN CLOSE and INQUIRE Keywords.
* carriage returns:                      Carriage Returns.
* case sensitivity:                      Case Sensitivity.
* cc1 program:                           What is GNU Fortran?.
* cc1plus program:                       What is GNU Fortran?.
* CCos intrinsic:                        CCos Intrinsic.
* CDAbs intrinsic:                       CDAbs Intrinsic.
* CDCos intrinsic:                       CDCos Intrinsic.
* CDExp intrinsic:                       CDExp Intrinsic.
* CDLog intrinsic:                       CDLog Intrinsic.
* CDSin intrinsic:                       CDSin Intrinsic.
* CDSqRt intrinsic:                      CDSqRt Intrinsic.
* Ceiling intrinsic:                     Ceiling Intrinsic.
* CExp intrinsic:                        CExp Intrinsic.
* cfortran.h:                            C Interfacing Tools.
* changes, user-visible:                 Changes.
* Char intrinsic:                        Char Intrinsic.
* character assignments:                 Fortran 90 Features.
* character constants <1>:               Character and Hollerith Constants.
* character constants <2>:               Ugly Conversion of Initializers.
* character constants <3>:               Double Quote Meaning.
* character constants:                   Fortran Dialect Options.
* character set:                         Fortran Dialect Options.
* CHARACTER*(*):                         Arbitrary Concatenation.
* CHARACTER, null:                       Character Type.
* character-variable length:             Character-variable Length.
* characters:                            Character Set.
* characters, comma:                     Ugly Null Arguments.
* characters, comment <1>:               LEX.
* characters, comment <2>:               Exclamation Point.
* characters, comment <3>:               Trailing Comment.
* characters, comment:                   Statements Comments Lines.
* characters, continuation <1>:          LEX.
* characters, continuation <2>:          Exclamation Point.
* characters, continuation:              Statements Comments Lines.
* ChDir intrinsic <1>:                   ChDir Intrinsic (function).
* ChDir intrinsic:                       ChDir Intrinsic (subroutine).
* checking subscripts:                   Code Gen Options.
* checking substrings:                   Code Gen Options.
* checks, of internal consistency:       Overall Options.
* ChMod intrinsic <1>:                   ChMod Intrinsic (function).
* ChMod intrinsic:                       ChMod Intrinsic (subroutine).
* CLog intrinsic:                        CLog Intrinsic.
* close angle:                           Character Set.
* close bracket:                         Character Set.
* CLOSE statement:                       OPEN CLOSE and INQUIRE Keywords.
* Cmplx intrinsic <1>:                   Cmplx Intrinsic.
* Cmplx intrinsic:                       CMPLX() of DOUBLE PRECISION.
* code generation, conventions:          Code Gen Options.
* code generator:                        What is GNU Fortran?.
* code, assembly:                        What is GNU Fortran?.
* code, displaying main source:          Known Bugs.
* code, distributing:                    Distributing Binaries.
* code, in-line:                         What is GNU Fortran?.
* code, legacy:                          Collected Fortran Wisdom.
* code, machine:                         What is GNU Fortran?.
* code, modifying:                       Overall Options.
* code, source <1>:                      Case Sensitivity.
* code, source <2>:                      Source Form.
* code, source <3>:                      Lines.
* code, source:                          What is GNU Fortran?.
* code, stack variables:                 Maximum Stackable Size.
* code, user:                            Cannot Link Fortran Programs.
* code, writing:                         Collected Fortran Wisdom.
* column-major ordering:                 Arrays.
* columns 73 through 80:                 Better Source Model.
* comma, trailing:                       Ugly Null Arguments.
* command options:                       Invoking G77.
* commands, as:                          What is GNU Fortran?.
* commands, g77 <1>:                     G77 and GCC.
* commands, g77:                         What is GNU Fortran?.
* commands, gcc <1>:                     G77 and GCC.
* commands, gcc:                         What is GNU Fortran?.
* commands, gdb:                         What is GNU Fortran?.
* commands, ld:                          What is GNU Fortran?.
* comment <1>:                           LEX.
* comment <2>:                           Trailing Comment.
* comment:                               Statements Comments Lines.
* comment character:                     Exclamation Point.
* comment line, debug <1>:               Enabling Debug Lines.
* comment line, debug:                   Debug Line.
* common blocks <1>:                     Mangling of Names.
* common blocks <2>:                     Known Bugs.
* common blocks <3>:                     Common Blocks.
* common blocks:                         Debugging Options.
* common blocks, large:                  Large Common Blocks.
* COMMON layout:                         Aligned Data.
* COMMON statement <1>:                  Multiple Definitions of External Names.
* COMMON statement:                      Common Blocks.
* comparing logical expressions:         Equivalence Versus Equality.
* compatibility, f2c <1>:                Avoid f2c Compatibility.
* compatibility, f2c <2>:                Block Data and Libraries.
* compatibility, f2c <3>:                Code Gen Options.
* compatibility, f2c <4>:                Shorthand Options.
* compatibility, f2c:                    Overall Options.
* compatibility, f77:                    Shorthand Options.
* compatibility, FORTRAN 66 <1>:         Fortran Dialect Options.
* compatibility, FORTRAN 66:             Shorthand Options.
* compatibility, FORTRAN 77:             Standard Support.
* compatibility, Fortran 90:             Fortran 90.
* compilation, in-line <1>:              GLOBALS.
* compilation, in-line <2>:              Code Gen Options.
* compilation, in-line:                  Optimize Options.
* compilation, pedantic:                 Pedantic Compilation.
* compilation, status:                   Overall Options.
* compiler bugs, reporting:              Bug Reporting.
* compiler limits:                       Compiler Limits.
* compiler memory usage:                 Known Bugs.
* compiler speed:                        Known Bugs.
* compilers:                             What is GNU Fortran?.
* compiling programs:                    G77 and GCC.
* Complex intrinsic:                     Complex Intrinsic.
* COMPLEX intrinsics:                    Fortran Dialect Options.
* complex performance:                   Known Bugs.
* COMPLEX statement:                     Complex Variables.
* complex values:                        Ugly Complex Part Extraction.
* complex variables:                     Complex Variables.
* COMPLEX(KIND=1) type:                  Compiler Types.
* COMPLEX(KIND=2) type:                  Compiler Types.
* components of g77:                     What is GNU Fortran?.
* concatenation:                         Arbitrary Concatenation.
* concepts, basic:                       What is GNU Fortran?.
* conformance, IEEE 754 <1>:             Floating-point precision.
* conformance, IEEE 754:                 Optimize Options.
* Conjg intrinsic:                       Conjg Intrinsic.
* consistency checks:                    Overall Options.
* constants <1>:                         Compiler Constants.
* constants:                             Constants.
* constants, character <1>:              Character and Hollerith Constants.
* constants, character <2>:              Ugly Conversion of Initializers.
* constants, character:                  Double Quote Meaning.
* constants, context-sensitive:          Context-Sensitive Constants.
* constants, Hollerith <1>:              Character and Hollerith Constants.
* constants, Hollerith <2>:              Ugly Conversion of Initializers.
* constants, Hollerith:                  Ugly Implicit Argument Conversion.
* constants, integer:                    Known Bugs.
* constants, octal:                      Double Quote Meaning.
* constants, prefix-radix:               Fortran Dialect Options.
* constants, types:                      Fortran Dialect Options.
* construct names:                       Construct Names.
* context-sensitive constants:           Context-Sensitive Constants.
* context-sensitive intrinsics:          Context-Sensitive Intrinsicness.
* continuation character <1>:            LEX.
* continuation character <2>:            Exclamation Point.
* continuation character:                Statements Comments Lines.
* continuation line, ampersand:          Ampersands.
* continuation line, number of:          Continuation Line.
* contributors:                          Contributors.
* conversions, nonportable:              Nonportable Conversions.
* core dump:                             Bug Criteria.
* Cos intrinsic:                         Cos Intrinsic.
* CosD intrinsic:                        CosD Intrinsic.
* CosH intrinsic:                        CosH Intrinsic.
* Count intrinsic:                       Count Intrinsic.
* cpp preprocessor:                      Overall Options.
* cpp program <1>:                       LEX.
* cpp program <2>:                       Bug Reporting.
* cpp program <3>:                       Preprocessor Options.
* cpp program <4>:                       Overall Options.
* cpp program:                           What is GNU Fortran?.
* CPU_Time intrinsic:                    CPU_Time Intrinsic.
* Cray pointers:                         POINTER Statements.
* credits:                               Contributors.
* cross-compiler, building:              Floating-point Bit Patterns.
* cross-compiler, problems:              Cross-compiler Problems.
* CShift intrinsic:                      CShift Intrinsic.
* CSin intrinsic:                        CSin Intrinsic.
* CSqRt intrinsic:                       CSqRt Intrinsic.
* CTime intrinsic <1>:                   CTime Intrinsic (function).
* CTime intrinsic:                       CTime Intrinsic (subroutine).
* CYCLE statement:                       CYCLE and EXIT.
* DAbs intrinsic:                        DAbs Intrinsic.
* DACos intrinsic:                       DACos Intrinsic.
* DACosD intrinsic:                      DACosD Intrinsic.
* DASin intrinsic:                       DASin Intrinsic.
* DASinD intrinsic:                      DASinD Intrinsic.
* DATA statement <1>:                    Known Bugs.
* DATA statement:                        Code Gen Options.
* data types:                            Compiler Types.
* data, aligned:                         Aligned Data.
* data, overwritten:                     Strange Behavior at Run Time.
* DATan intrinsic:                       DATan Intrinsic.
* DATan2 intrinsic:                      DATan2 Intrinsic.
* DATan2D intrinsic:                     DATan2D Intrinsic.
* DATanD intrinsic:                      DATanD Intrinsic.
* Date intrinsic:                        Date Intrinsic.
* Date_and_Time intrinsic:               Date_and_Time Intrinsic.
* date_y2kbuggy_0:                       Year 2000 (Y2K) Problems.
* DbesJ0 intrinsic:                      DbesJ0 Intrinsic.
* DbesJ1 intrinsic:                      DbesJ1 Intrinsic.
* DbesJN intrinsic:                      DbesJN Intrinsic.
* DbesY0 intrinsic:                      DbesY0 Intrinsic.
* DbesY1 intrinsic:                      DbesY1 Intrinsic.
* DbesYN intrinsic:                      DbesYN Intrinsic.
* Dble intrinsic:                        Dble Intrinsic.
* DbleQ intrinsic:                       DbleQ Intrinsic.
* DCmplx intrinsic:                      DCmplx Intrinsic.
* DConjg intrinsic:                      DConjg Intrinsic.
* DCos intrinsic:                        DCos Intrinsic.
* DCosD intrinsic:                       DCosD Intrinsic.
* DCosH intrinsic:                       DCosH Intrinsic.
* DDiM intrinsic:                        DDiM Intrinsic.
* debug line <1>:                        Enabling Debug Lines.
* debug line:                            Debug Line.
* debug_rtx:                             Bug Reporting.
* debugger <1>:                          Known Bugs.
* debugger:                              What is GNU Fortran?.
* debugging <1>:                         Known Bugs.
* debugging <2>:                         Names.
* debugging <3>:                         Main Program Unit.
* debugging:                             Debugging and Interfacing.
* debugging information options:         Debugging Options.
* debugging main source code:            Known Bugs.
* DECODE statement:                      ENCODE and DECODE.
* deleted intrinsics:                    Intrinsic Groups.
* DErF intrinsic:                        DErF Intrinsic.
* DErFC intrinsic:                       DErFC Intrinsic.
* DExp intrinsic:                        DExp Intrinsic.
* DFloat intrinsic:                      DFloat Intrinsic.
* DFlotI intrinsic:                      DFlotI Intrinsic.
* DFlotJ intrinsic:                      DFlotJ Intrinsic.
* diagnostics:                           Diagnostics.
* diagnostics, incorrect:                What is GNU Fortran?.
* dialect options:                       Fortran Dialect Options.
* Digital Fortran features:              Fortran Dialect Options.
* Digits intrinsic:                      Digits Intrinsic.
* DiM intrinsic:                         DiM Intrinsic.
* DImag intrinsic:                       DImag Intrinsic.
* DIMENSION statement <1>:               Array Bounds Expressions.
* DIMENSION statement <2>:               Adjustable Arrays.
* DIMENSION statement:                   Arrays.
* DIMENSION X(1):                        Ugly Assumed-Size Arrays.
* dimensioning arrays:                   Adjustable Arrays.
* DInt intrinsic:                        DInt Intrinsic.
* direction of language development:     Direction of Language Development.
* directive, #include:                   Bug Reporting.
* directive, INCLUDE <1>:                Bug Reporting.
* directive, INCLUDE <2>:                Directory Options.
* directive, INCLUDE:                    Preprocessor Options.
* directory, options:                    Directory Options.
* directory, search paths for inclusion: Directory Options.
* disabled intrinsics:                   Intrinsic Groups.
* disk full <1>:                         Output Assumed To Flush.
* disk full:                             Always Flush Output.
* displaying main source code:           Known Bugs.
* disposition of files:                  OPEN CLOSE and INQUIRE Keywords.
* distensions:                           Distensions.
* DLog intrinsic:                        DLog Intrinsic.
* DLog10 intrinsic:                      DLog10 Intrinsic.
* DMax1 intrinsic:                       DMax1 Intrinsic.
* DMin1 intrinsic:                       DMin1 Intrinsic.
* DMod intrinsic:                        DMod Intrinsic.
* DNInt intrinsic:                       DNInt Intrinsic.
* DNRM2:                                 News.
* DO:                                    DO WHILE.
* DO loops, one-trip:                    Fortran Dialect Options.
* DO loops, zero-trip:                   Fortran Dialect Options.
* DO statement <1>:                      Loops.
* DO statement:                          Warning Options.
* DO WHILE <1>:                          DO WHILE.
* DO WHILE:                              Optimize Options.
* dollar sign <1>:                       Dollar Signs.
* dollar sign <2>:                       I/O.
* dollar sign:                           Fortran Dialect Options.
* Dot_Product intrinsic:                 Dot_Product Intrinsic.
* DOUBLE COMPLEX:                        DOUBLE COMPLEX.
* DOUBLE COMPLEX type:                   Compiler Types.
* DOUBLE PRECISION type:                 Compiler Types.
* double quote:                          Character Set.
* double quoted character constants <1>: Fortran 90 Features.
* double quoted character constants:     Character Type.
* double quotes:                         Double Quote Meaning.
* double-precision performance <1>:      Changes.
* double-precision performance:          News.
* DProd intrinsic:                       DProd Intrinsic.
* DReal intrinsic:                       DReal Intrinsic.
* driver, gcc command as:                What is GNU Fortran?.
* DSign intrinsic:                       DSign Intrinsic.
* DSin intrinsic:                        DSin Intrinsic.
* DSinD intrinsic:                       DSinD Intrinsic.
* DSinH intrinsic:                       DSinH Intrinsic.
* DSqRt intrinsic:                       DSqRt Intrinsic.
* DTan intrinsic:                        DTan Intrinsic.
* DTanD intrinsic:                       DTanD Intrinsic.
* DTanH intrinsic:                       DTanH Intrinsic.
* DTime intrinsic <1>:                   DTime Intrinsic (function).
* DTime intrinsic:                       DTime Intrinsic (subroutine).
* dummies, unused:                       Warning Options.
* edit descriptor, <>:                   I/O.
* edit descriptor, O:                    I/O.
* edit descriptor, Q:                    Q Edit Descriptor.
* edit descriptor, Z <1>:                Fortran 90 Features.
* edit descriptor, Z:                    I/O.
* effecting IMPLICIT NONE:               Warning Options.
* ELF support:                           News.
* empty CHARACTER strings:               Character Type.
* enabled intrinsics:                    Intrinsic Groups.
* ENCODE statement:                      ENCODE and DECODE.
* END DO:                                END DO.
* entry points:                          Alternate Entry Points.
* ENTRY statement:                       Alternate Entry Points.
* environment variables:                 Environment Variables.
* EOShift intrinsic:                     EOShift Intrinsic.
* Epsilon intrinsic:                     Epsilon Intrinsic.
* equivalence areas <1>:                 Known Bugs.
* equivalence areas <2>:                 Local Equivalence Areas.
* equivalence areas:                     Debugging Options.
* EQUIVALENCE statement:                 Local Equivalence Areas.
* ErF intrinsic:                         ErF Intrinsic.
* ErFC intrinsic:                        ErFC Intrinsic.
* error messages <1>:                    Warnings and Errors.
* error messages:                        Run-time Library Errors.
* error messages, incorrect:             What is GNU Fortran?.
* error values:                          Run-time Library Errors.
* errors, linker:                        Large Common Blocks.
* ETime intrinsic <1>:                   ETime Intrinsic (function).
* ETime intrinsic:                       ETime Intrinsic (subroutine).
* exceptions, floating-point:            Floating-point Exception Handling.
* exclamation point <1>:                 LEX.
* exclamation point <2>:                 Exclamation Point.
* exclamation point <3>:                 Trailing Comment.
* exclamation point <4>:                 Character Set.
* exclamation point:                     Statements Comments Lines.
* executable file:                       What is GNU Fortran?.
* Exit intrinsic:                        Exit Intrinsic.
* EXIT statement:                        CYCLE and EXIT.
* Exp intrinsic:                         Exp Intrinsic.
* Exponent intrinsic:                    Exponent Intrinsic.
* extended-source option:                Fortran Dialect Options.
* extensions, file name:                 Overall Options.
* extensions, from Fortran 90:           Fortran 90 Features.
* extensions, VXT:                       VXT Fortran.
* external names:                        Mangling of Names.
* extra warnings:                        Warning Options.
* f2c:                                   Increasing Precision/Range.
* f2c compatibility <1>:                 Avoid f2c Compatibility.
* f2c compatibility <2>:                 Block Data and Libraries.
* f2c compatibility <3>:                 Debugging and Interfacing.
* f2c compatibility <4>:                 Code Gen Options.
* f2c compatibility <5>:                 Shorthand Options.
* f2c compatibility:                     Overall Options.
* f2c intrinsics:                        Fortran Dialect Options.
* f2c intrinsics group:                  Intrinsic Groups.
* f77 compatibility:                     Shorthand Options.
* f77 support:                           Backslash in Constants.
* f771, linking error for:               Missing strtoul or bsearch.
* f771, program:                         What is GNU Fortran?.
* f90 intrinsics group:                  Intrinsic Groups.
* fatal signal:                          Bug Criteria.
* FDate intrinsic <1>:                   FDate Intrinsic (function).
* FDate intrinsic:                       FDate Intrinsic (subroutine).
* features, language:                    Direction of Language Development.
* features, ugly <1>:                    Distensions.
* features, ugly:                        Shorthand Options.
* FFE:                                   What is GNU Fortran?.
* FFECOM_sizeMAXSTACKITEM:               Maximum Stackable Size.
* fflush() <1>:                          Output Assumed To Flush.
* fflush():                              Always Flush Output.
* FGet intrinsic <1>:                    FGet Intrinsic (function).
* FGet intrinsic:                        FGet Intrinsic (subroutine).
* FGetC intrinsic <1>:                   FGetC Intrinsic (function).
* FGetC intrinsic:                       FGetC Intrinsic (subroutine).
* file format not recognized:            What is GNU Fortran?.
* file formats:                          Portable Unformatted Files.
* file name extension:                   Overall Options.
* file name suffix:                      Overall Options.
* file type:                             Overall Options.
* file, source <1>:                      Source Form.
* file, source <2>:                      Lines.
* file, source:                          What is GNU Fortran?.
* files, executable:                     What is GNU Fortran?.
* fixed form <1>:                        Source Form.
* fixed form <2>:                        Lines.
* fixed form:                            Fortran Dialect Options.
* Float intrinsic:                       Float Intrinsic.
* FloatI intrinsic:                      FloatI Intrinsic.
* floating-point bit patterns:           Floating-point Bit Patterns.
* floating-point errors:                 Floating-point Errors.
* floating-point, errors:                Inconsistent Calling Sequences.
* floating-point, exceptions:            Floating-point Exception Handling.
* floating-point, precision <1>:         Floating-point precision.
* floating-point, precision:             Optimize Options.
* FloatJ intrinsic:                      FloatJ Intrinsic.
* Floor intrinsic:                       Floor Intrinsic.
* Flush intrinsic:                       Flush Intrinsic.
* flushing output <1>:                   Output Assumed To Flush.
* flushing output:                       Always Flush Output.
* FNum intrinsic:                        FNum Intrinsic.
* FORM='PRINT':                          OPEN CLOSE and INQUIRE Keywords.
* FORMAT descriptors <1>:                Fortran 90 Features.
* FORMAT descriptors:                    I/O.
* FORMAT statement <1>:                  Q Edit Descriptor.
* FORMAT statement:                      Expressions in FORMAT Statements.
* FORTRAN 66 <1>:                        Fortran Dialect Options.
* FORTRAN 66:                            Shorthand Options.
* FORTRAN 77 compatibility:              Standard Support.
* Fortran 90:                            Fortran 90 Features.
* Fortran 90, compatibility:             Fortran 90.
* Fortran 90, features:                  Fortran Dialect Options.
* Fortran 90, intrinsics:                Fortran Dialect Options.
* Fortran 90, support:                   Fortran 90 Support.
* Fortran preprocessor:                  Overall Options.
* forward references:                    GLOBALS.
* FPE handling:                          Floating-point Exception Handling.
* FPut intrinsic <1>:                    FPut Intrinsic (function).
* FPut intrinsic:                        FPut Intrinsic (subroutine).
* FPutC intrinsic <1>:                   FPutC Intrinsic (function).
* FPutC intrinsic:                       FPutC Intrinsic (subroutine).
* Fraction intrinsic:                    Fraction Intrinsic.
* free form <1>:                         Source Form.
* free form <2>:                         Lines.
* free form:                             Fortran Dialect Options.
* front end, g77:                        What is GNU Fortran?.
* FSeek intrinsic:                       FSeek Intrinsic.
* FSF, funding the:                      Funding GNU Fortran.
* FStat intrinsic <1>:                   FStat Intrinsic (function).
* FStat intrinsic:                       FStat Intrinsic (subroutine).
* FTell intrinsic <1>:                   FTell Intrinsic (function).
* FTell intrinsic:                       FTell Intrinsic (subroutine).
* function references, in adjustable array bounds: Array Bounds Expressions.
* FUNCTION statement <1>:                Functions.
* FUNCTION statement:                    Procedures.
* functions:                             Functions.
* functions, mistyped:                   Not My Type.
* funding improvements:                  Funding GNU Fortran.
* funding the FSF:                       Funding GNU Fortran.
* g77 options, --driver <1>:             Changes.
* g77 options, --driver:                 News.
* g77 options, -v:                       G77 and GCC.
* g77, command <1>:                      G77 and GCC.
* g77, command:                          What is GNU Fortran?.
* g77, components of:                    What is GNU Fortran?.
* g77, front end:                        What is GNU Fortran?.
* G77_date_y2kbuggy_0:                   Year 2000 (Y2K) Problems.
* G77_vxtidate_y2kbuggy_0:               Year 2000 (Y2K) Problems.
* GBE <1>:                               Patching GNU CC.
* GBE:                                   What is GNU Fortran?.
* gcc, back end:                         What is GNU Fortran?.
* gcc, building:                         Building GNU CC Necessary.
* gcc, command <1>:                      G77 and GCC.
* gcc, command:                          What is GNU Fortran?.
* gcc, command as driver:                What is GNU Fortran?.
* gcc, not recognizing Fortran source:   What is GNU Fortran?.
* gdb, command:                          What is GNU Fortran?.
* gdb, support:                          Debugger Problems.
* generic intrinsics:                    Generics and Specifics.
* GError intrinsic:                      GError Intrinsic.
* GetArg intrinsic <1>:                  Main Program Unit.
* GetArg intrinsic:                      GetArg Intrinsic.
* GetCWD intrinsic <1>:                  GetCWD Intrinsic (function).
* GetCWD intrinsic:                      GetCWD Intrinsic (subroutine).
* GetEnv intrinsic:                      GetEnv Intrinsic.
* GetGId intrinsic:                      GetGId Intrinsic.
* GetLog intrinsic:                      GetLog Intrinsic.
* GetPId intrinsic:                      GetPId Intrinsic.
* getting started:                       Getting Started.
* GetUId intrinsic:                      GetUId Intrinsic.
* global names, warning <1>:             Code Gen Options.
* global names, warning:                 Warning Options.
* GMTime intrinsic:                      GMTime Intrinsic.
* GNU Back End (GBE):                    What is GNU Fortran?.
* GNU C required:                        GNU C Required.
* GNU Fortran command options:           Invoking G77.
* GNU Fortran Front End (FFE):           What is GNU Fortran?.
* gnu intrinsics group:                  Intrinsic Groups.
* GOTO statement:                        Assigned Statement Labels.
* groups of intrinsics:                  Intrinsic Groups.
* hardware errors:                       Signal 11 and Friends.
* hash mark:                             Character Set.
* HDF:                                   Portable Unformatted Files.
* hidden intrinsics:                     Intrinsic Groups.
* Hollerith constants <1>:               Character and Hollerith Constants.
* Hollerith constants <2>:               Ugly Conversion of Initializers.
* Hollerith constants <3>:               Ugly Implicit Argument Conversion.
* Hollerith constants:                   Fortran Dialect Options.
* horizontal tab:                        Tabs.
* HostNm intrinsic <1>:                  HostNm Intrinsic (function).
* HostNm intrinsic:                      HostNm Intrinsic (subroutine).
* Huge intrinsic:                        Huge Intrinsic.
* I/O, errors:                           Run-time Library Errors.
* I/O, flushing <1>:                     Output Assumed To Flush.
* I/O, flushing:                         Always Flush Output.
* IAbs intrinsic:                        IAbs Intrinsic.
* IAChar intrinsic:                      IAChar Intrinsic.
* IAnd intrinsic:                        IAnd Intrinsic.
* IArgC intrinsic <1>:                   Main Program Unit.
* IArgC intrinsic:                       IArgC Intrinsic.
* IBClr intrinsic:                       IBClr Intrinsic.
* IBits intrinsic:                       IBits Intrinsic.
* IBSet intrinsic:                       IBSet Intrinsic.
* IChar intrinsic:                       IChar Intrinsic.
* IDate intrinsic <1>:                   IDate Intrinsic (VXT).
* IDate intrinsic:                       IDate Intrinsic (UNIX).
* IDiM intrinsic:                        IDiM Intrinsic.
* IDInt intrinsic:                       IDInt Intrinsic.
* IDNInt intrinsic:                      IDNInt Intrinsic.
* IEEE 754 conformance <1>:              Floating-point precision.
* IEEE 754 conformance:                  Optimize Options.
* IEOr intrinsic:                        IEOr Intrinsic.
* IErrNo intrinsic:                      IErrNo Intrinsic.
* IFix intrinsic:                        IFix Intrinsic.
* ignoring LANGUAGES macro:              LANGUAGES Macro Ignored.
* IIAbs intrinsic:                       IIAbs Intrinsic.
* IIAnd intrinsic:                       IIAnd Intrinsic.
* IIBClr intrinsic:                      IIBClr Intrinsic.
* IIBits intrinsic:                      IIBits Intrinsic.
* IIBSet intrinsic:                      IIBSet Intrinsic.
* IIDiM intrinsic:                       IIDiM Intrinsic.
* IIDInt intrinsic:                      IIDInt Intrinsic.
* IIDNnt intrinsic:                      IIDNnt Intrinsic.
* IIEOr intrinsic:                       IIEOr Intrinsic.
* IIFix intrinsic:                       IIFix Intrinsic.
* IInt intrinsic:                        IInt Intrinsic.
* IIOr intrinsic:                        IIOr Intrinsic.
* IIQint intrinsic:                      IIQint Intrinsic.
* IIQNnt intrinsic:                      IIQNnt Intrinsic.
* IIShftC intrinsic:                     IIShftC Intrinsic.
* IISign intrinsic:                      IISign Intrinsic.
* illegal unit number <1>:               Large File Unit Numbers.
* illegal unit number:                   Larger File Unit Numbers.
* Imag intrinsic:                        Imag Intrinsic.
* imaginary part <1>:                    Complex Variables.
* imaginary part:                        Ugly Complex Part Extraction.
* ImagPart intrinsic:                    ImagPart Intrinsic.
* IMax0 intrinsic:                       IMax0 Intrinsic.
* IMax1 intrinsic:                       IMax1 Intrinsic.
* IMin0 intrinsic:                       IMin0 Intrinsic.
* IMin1 intrinsic:                       IMin1 Intrinsic.
* IMod intrinsic:                        IMod Intrinsic.
* IMPLICIT CHARACTER*(*) statement:      Limitation on Implicit Declarations.
* implicit declaration, warning:         Warning Options.
* IMPLICIT NONE, similar effect:         Warning Options.
* implicit typing:                       Not My Type.
* improvements, funding:                 Funding GNU Fortran.
* in-line code <1>:                      GLOBALS.
* in-line code <2>:                      Code Gen Options.
* in-line code <3>:                      Optimize Options.
* in-line code:                          What is GNU Fortran?.
* INCLUDE directive <1>:                 Bug Reporting.
* INCLUDE directive <2>:                 INCLUDE.
* INCLUDE directive <3>:                 Directory Options.
* INCLUDE directive:                     Preprocessor Options.
* included files:                        Bug Reporting.
* inclusion, directory search paths for: Directory Options.
* inconsistent floating-point results:   Floating-point Errors.
* incorrect diagnostics:                 What is GNU Fortran?.
* incorrect error messages:              What is GNU Fortran?.
* incorrect use of language:             What is GNU Fortran?.
* increasing maximum unit number <1>:    Large File Unit Numbers.
* increasing maximum unit number:        Larger File Unit Numbers.
* increasing precision:                  Increasing Precision/Range.
* increasing range:                      Increasing Precision/Range.
* Index intrinsic:                       Index Intrinsic.
* indexed (iterative) DO:                Optimize Options.
* infinite spaces printed:               Strange Behavior at Run Time.
* INInt intrinsic:                       INInt Intrinsic.
* initialization, bug:                   Known Bugs.
* initialization, of local variables:    Code Gen Options.
* initialization, run-time:              Startup Code.
* initialization, statement placement:   Initializing Before Specifying.
* INot intrinsic:                        INot Intrinsic.
* INQUIRE statement:                     OPEN CLOSE and INQUIRE Keywords.
* installation problems:                 Problems Installing.
* installation trouble:                  Trouble.
* installing, GNU Fortran:               Installation.
* Int intrinsic:                         Int Intrinsic.
* Int2 intrinsic:                        Int2 Intrinsic.
* Int8 intrinsic:                        Int8 Intrinsic.
* integer constants:                     Known Bugs.
* INTEGER(KIND=1) type:                  Compiler Types.
* INTEGER(KIND=2) type:                  Compiler Types.
* INTEGER(KIND=3) type:                  Compiler Types.
* INTEGER(KIND=6) type:                  Compiler Types.
* INTEGER*2 support:                     Popular Non-standard Types.
* INTEGER*8 support:                     Full Support for Compiler Types.
* Intel x86:                             News.
* interfacing:                           Debugging and Interfacing.
* internal consistency checks:           Overall Options.
* intrinsics, Abort:                     Abort Intrinsic.
* intrinsics, Abs:                       Abs Intrinsic.
* intrinsics, Access:                    Access Intrinsic.
* intrinsics, AChar:                     AChar Intrinsic.
* intrinsics, ACos:                      ACos Intrinsic.
* intrinsics, ACosD:                     ACosD Intrinsic.
* intrinsics, AdjustL:                   AdjustL Intrinsic.
* intrinsics, AdjustR:                   AdjustR Intrinsic.
* intrinsics, AImag <1>:                 AImag Intrinsic.
* intrinsics, AImag:                     REAL() and AIMAG() of Complex.
* intrinsics, AIMax0:                    AIMax0 Intrinsic.
* intrinsics, AIMin0:                    AIMin0 Intrinsic.
* intrinsics, AInt:                      AInt Intrinsic.
* intrinsics, AJMax0:                    AJMax0 Intrinsic.
* intrinsics, AJMin0:                    AJMin0 Intrinsic.
* intrinsics, Alarm:                     Alarm Intrinsic.
* intrinsics, All:                       All Intrinsic.
* intrinsics, Allocated:                 Allocated Intrinsic.
* intrinsics, ALog:                      ALog Intrinsic.
* intrinsics, ALog10:                    ALog10 Intrinsic.
* intrinsics, AMax0:                     AMax0 Intrinsic.
* intrinsics, AMax1:                     AMax1 Intrinsic.
* intrinsics, AMin0:                     AMin0 Intrinsic.
* intrinsics, AMin1:                     AMin1 Intrinsic.
* intrinsics, AMod:                      AMod Intrinsic.
* intrinsics, And <1>:                   Bit Operations on Floating-point Data.
* intrinsics, And:                       And Intrinsic.
* intrinsics, ANInt:                     ANInt Intrinsic.
* intrinsics, Any:                       Any Intrinsic.
* intrinsics, ASin:                      ASin Intrinsic.
* intrinsics, ASinD:                     ASinD Intrinsic.
* intrinsics, Associated:                Associated Intrinsic.
* intrinsics, ATan:                      ATan Intrinsic.
* intrinsics, ATan2:                     ATan2 Intrinsic.
* intrinsics, ATan2D:                    ATan2D Intrinsic.
* intrinsics, ATanD:                     ATanD Intrinsic.
* intrinsics, badu77:                    Fortran Dialect Options.
* intrinsics, BesJ0:                     BesJ0 Intrinsic.
* intrinsics, BesJ1:                     BesJ1 Intrinsic.
* intrinsics, BesJN:                     BesJN Intrinsic.
* intrinsics, BesY0:                     BesY0 Intrinsic.
* intrinsics, BesY1:                     BesY1 Intrinsic.
* intrinsics, BesYN:                     BesYN Intrinsic.
* intrinsics, Bit_Size:                  Bit_Size Intrinsic.
* intrinsics, BITest:                    BITest Intrinsic.
* intrinsics, BJTest:                    BJTest Intrinsic.
* intrinsics, BTest:                     BTest Intrinsic.
* intrinsics, CAbs:                      CAbs Intrinsic.
* intrinsics, CCos:                      CCos Intrinsic.
* intrinsics, CDAbs:                     CDAbs Intrinsic.
* intrinsics, CDCos:                     CDCos Intrinsic.
* intrinsics, CDExp:                     CDExp Intrinsic.
* intrinsics, CDLog:                     CDLog Intrinsic.
* intrinsics, CDSin:                     CDSin Intrinsic.
* intrinsics, CDSqRt:                    CDSqRt Intrinsic.
* intrinsics, Ceiling:                   Ceiling Intrinsic.
* intrinsics, CExp:                      CExp Intrinsic.
* intrinsics, Char:                      Char Intrinsic.
* intrinsics, ChDir <1>:                 ChDir Intrinsic (function).
* intrinsics, ChDir:                     ChDir Intrinsic (subroutine).
* intrinsics, ChMod <1>:                 ChMod Intrinsic (function).
* intrinsics, ChMod:                     ChMod Intrinsic (subroutine).
* intrinsics, CLog:                      CLog Intrinsic.
* intrinsics, Cmplx <1>:                 Cmplx Intrinsic.
* intrinsics, Cmplx:                     CMPLX() of DOUBLE PRECISION.
* intrinsics, Complex:                   Complex Intrinsic.
* intrinsics, COMPLEX:                   Fortran Dialect Options.
* intrinsics, Conjg:                     Conjg Intrinsic.
* intrinsics, context-sensitive:         Context-Sensitive Intrinsicness.
* intrinsics, Cos:                       Cos Intrinsic.
* intrinsics, CosD:                      CosD Intrinsic.
* intrinsics, CosH:                      CosH Intrinsic.
* intrinsics, Count:                     Count Intrinsic.
* intrinsics, CPU_Time:                  CPU_Time Intrinsic.
* intrinsics, CShift:                    CShift Intrinsic.
* intrinsics, CSin:                      CSin Intrinsic.
* intrinsics, CSqRt:                     CSqRt Intrinsic.
* intrinsics, CTime <1>:                 CTime Intrinsic (function).
* intrinsics, CTime:                     CTime Intrinsic (subroutine).
* intrinsics, DAbs:                      DAbs Intrinsic.
* intrinsics, DACos:                     DACos Intrinsic.
* intrinsics, DACosD:                    DACosD Intrinsic.
* intrinsics, DASin:                     DASin Intrinsic.
* intrinsics, DASinD:                    DASinD Intrinsic.
* intrinsics, DATan:                     DATan Intrinsic.
* intrinsics, DATan2:                    DATan2 Intrinsic.
* intrinsics, DATan2D:                   DATan2D Intrinsic.
* intrinsics, DATanD:                    DATanD Intrinsic.
* intrinsics, Date:                      Date Intrinsic.
* intrinsics, Date_and_Time:             Date_and_Time Intrinsic.
* intrinsics, DbesJ0:                    DbesJ0 Intrinsic.
* intrinsics, DbesJ1:                    DbesJ1 Intrinsic.
* intrinsics, DbesJN:                    DbesJN Intrinsic.
* intrinsics, DbesY0:                    DbesY0 Intrinsic.
* intrinsics, DbesY1:                    DbesY1 Intrinsic.
* intrinsics, DbesYN:                    DbesYN Intrinsic.
* intrinsics, Dble:                      Dble Intrinsic.
* intrinsics, DbleQ:                     DbleQ Intrinsic.
* intrinsics, DCmplx:                    DCmplx Intrinsic.
* intrinsics, DConjg:                    DConjg Intrinsic.
* intrinsics, DCos:                      DCos Intrinsic.
* intrinsics, DCosD:                     DCosD Intrinsic.
* intrinsics, DCosH:                     DCosH Intrinsic.
* intrinsics, DDiM:                      DDiM Intrinsic.
* intrinsics, deleted:                   Intrinsic Groups.
* intrinsics, DErF:                      DErF Intrinsic.
* intrinsics, DErFC:                     DErFC Intrinsic.
* intrinsics, DExp:                      DExp Intrinsic.
* intrinsics, DFloat:                    DFloat Intrinsic.
* intrinsics, DFlotI:                    DFlotI Intrinsic.
* intrinsics, DFlotJ:                    DFlotJ Intrinsic.
* intrinsics, Digits:                    Digits Intrinsic.
* intrinsics, DiM:                       DiM Intrinsic.
* intrinsics, DImag:                     DImag Intrinsic.
* intrinsics, DInt:                      DInt Intrinsic.
* intrinsics, disabled:                  Intrinsic Groups.
* intrinsics, DLog:                      DLog Intrinsic.
* intrinsics, DLog10:                    DLog10 Intrinsic.
* intrinsics, DMax1:                     DMax1 Intrinsic.
* intrinsics, DMin1:                     DMin1 Intrinsic.
* intrinsics, DMod:                      DMod Intrinsic.
* intrinsics, DNInt:                     DNInt Intrinsic.
* intrinsics, Dot_Product:               Dot_Product Intrinsic.
* intrinsics, DProd:                     DProd Intrinsic.
* intrinsics, DReal:                     DReal Intrinsic.
* intrinsics, DSign:                     DSign Intrinsic.
* intrinsics, DSin:                      DSin Intrinsic.
* intrinsics, DSinD:                     DSinD Intrinsic.
* intrinsics, DSinH:                     DSinH Intrinsic.
* intrinsics, DSqRt:                     DSqRt Intrinsic.
* intrinsics, DTan:                      DTan Intrinsic.
* intrinsics, DTanD:                     DTanD Intrinsic.
* intrinsics, DTanH:                     DTanH Intrinsic.
* intrinsics, DTime <1>:                 DTime Intrinsic (function).
* intrinsics, DTime:                     DTime Intrinsic (subroutine).
* intrinsics, enabled:                   Intrinsic Groups.
* intrinsics, EOShift:                   EOShift Intrinsic.
* intrinsics, Epsilon:                   Epsilon Intrinsic.
* intrinsics, ErF:                       ErF Intrinsic.
* intrinsics, ErFC:                      ErFC Intrinsic.
* intrinsics, ETime <1>:                 ETime Intrinsic (function).
* intrinsics, ETime:                     ETime Intrinsic (subroutine).
* intrinsics, Exit:                      Exit Intrinsic.
* intrinsics, Exp:                       Exp Intrinsic.
* intrinsics, Exponent:                  Exponent Intrinsic.
* intrinsics, f2c:                       Fortran Dialect Options.
* intrinsics, FDate <1>:                 FDate Intrinsic (function).
* intrinsics, FDate:                     FDate Intrinsic (subroutine).
* intrinsics, FGet <1>:                  FGet Intrinsic (function).
* intrinsics, FGet:                      FGet Intrinsic (subroutine).
* intrinsics, FGetC <1>:                 FGetC Intrinsic (function).
* intrinsics, FGetC:                     FGetC Intrinsic (subroutine).
* intrinsics, Float:                     Float Intrinsic.
* intrinsics, FloatI:                    FloatI Intrinsic.
* intrinsics, FloatJ:                    FloatJ Intrinsic.
* intrinsics, Floor:                     Floor Intrinsic.
* intrinsics, Flush:                     Flush Intrinsic.
* intrinsics, FNum:                      FNum Intrinsic.
* intrinsics, Fortran 90:                Fortran Dialect Options.
* intrinsics, FPut <1>:                  FPut Intrinsic (function).
* intrinsics, FPut:                      FPut Intrinsic (subroutine).
* intrinsics, FPutC <1>:                 FPutC Intrinsic (function).
* intrinsics, FPutC:                     FPutC Intrinsic (subroutine).
* intrinsics, Fraction:                  Fraction Intrinsic.
* intrinsics, FSeek:                     FSeek Intrinsic.
* intrinsics, FStat <1>:                 FStat Intrinsic (function).
* intrinsics, FStat:                     FStat Intrinsic (subroutine).
* intrinsics, FTell <1>:                 FTell Intrinsic (function).
* intrinsics, FTell:                     FTell Intrinsic (subroutine).
* intrinsics, generic:                   Generics and Specifics.
* intrinsics, GError:                    GError Intrinsic.
* intrinsics, GetArg <1>:                Main Program Unit.
* intrinsics, GetArg:                    GetArg Intrinsic.
* intrinsics, GetCWD <1>:                GetCWD Intrinsic (function).
* intrinsics, GetCWD:                    GetCWD Intrinsic (subroutine).
* intrinsics, GetEnv:                    GetEnv Intrinsic.
* intrinsics, GetGId:                    GetGId Intrinsic.
* intrinsics, GetLog:                    GetLog Intrinsic.
* intrinsics, GetPId:                    GetPId Intrinsic.
* intrinsics, GetUId:                    GetUId Intrinsic.
* intrinsics, GMTime:                    GMTime Intrinsic.
* intrinsics, groups:                    Intrinsic Groups.
* intrinsics, groups of:                 Intrinsic Groups.
* intrinsics, hidden:                    Intrinsic Groups.
* intrinsics, HostNm <1>:                HostNm Intrinsic (function).
* intrinsics, HostNm:                    HostNm Intrinsic (subroutine).
* intrinsics, Huge:                      Huge Intrinsic.
* intrinsics, IAbs:                      IAbs Intrinsic.
* intrinsics, IAChar:                    IAChar Intrinsic.
* intrinsics, IAnd:                      IAnd Intrinsic.
* intrinsics, IArgC <1>:                 Main Program Unit.
* intrinsics, IArgC:                     IArgC Intrinsic.
* intrinsics, IBClr:                     IBClr Intrinsic.
* intrinsics, IBits:                     IBits Intrinsic.
* intrinsics, IBSet:                     IBSet Intrinsic.
* intrinsics, IChar:                     IChar Intrinsic.
* intrinsics, IDate <1>:                 IDate Intrinsic (VXT).
* intrinsics, IDate:                     IDate Intrinsic (UNIX).
* intrinsics, IDiM:                      IDiM Intrinsic.
* intrinsics, IDInt:                     IDInt Intrinsic.
* intrinsics, IDNInt:                    IDNInt Intrinsic.
* intrinsics, IEOr:                      IEOr Intrinsic.
* intrinsics, IErrNo:                    IErrNo Intrinsic.
* intrinsics, IFix:                      IFix Intrinsic.
* intrinsics, IIAbs:                     IIAbs Intrinsic.
* intrinsics, IIAnd:                     IIAnd Intrinsic.
* intrinsics, IIBClr:                    IIBClr Intrinsic.
* intrinsics, IIBits:                    IIBits Intrinsic.
* intrinsics, IIBSet:                    IIBSet Intrinsic.
* intrinsics, IIDiM:                     IIDiM Intrinsic.
* intrinsics, IIDInt:                    IIDInt Intrinsic.
* intrinsics, IIDNnt:                    IIDNnt Intrinsic.
* intrinsics, IIEOr:                     IIEOr Intrinsic.
* intrinsics, IIFix:                     IIFix Intrinsic.
* intrinsics, IInt:                      IInt Intrinsic.
* intrinsics, IIOr:                      IIOr Intrinsic.
* intrinsics, IIQint:                    IIQint Intrinsic.
* intrinsics, IIQNnt:                    IIQNnt Intrinsic.
* intrinsics, IIShftC:                   IIShftC Intrinsic.
* intrinsics, IISign:                    IISign Intrinsic.
* intrinsics, Imag:                      Imag Intrinsic.
* intrinsics, ImagPart:                  ImagPart Intrinsic.
* intrinsics, IMax0:                     IMax0 Intrinsic.
* intrinsics, IMax1:                     IMax1 Intrinsic.
* intrinsics, IMin0:                     IMin0 Intrinsic.
* intrinsics, IMin1:                     IMin1 Intrinsic.
* intrinsics, IMod:                      IMod Intrinsic.
* intrinsics, Index:                     Index Intrinsic.
* intrinsics, INInt:                     INInt Intrinsic.
* intrinsics, INot:                      INot Intrinsic.
* intrinsics, Int:                       Int Intrinsic.
* intrinsics, Int2:                      Int2 Intrinsic.
* intrinsics, Int8:                      Int8 Intrinsic.
* intrinsics, IOr:                       IOr Intrinsic.
* intrinsics, IRand:                     IRand Intrinsic.
* intrinsics, IsaTty:                    IsaTty Intrinsic.
* intrinsics, IShft:                     IShft Intrinsic.
* intrinsics, IShftC:                    IShftC Intrinsic.
* intrinsics, ISign:                     ISign Intrinsic.
* intrinsics, ITime:                     ITime Intrinsic.
* intrinsics, IZExt:                     IZExt Intrinsic.
* intrinsics, JIAbs:                     JIAbs Intrinsic.
* intrinsics, JIAnd:                     JIAnd Intrinsic.
* intrinsics, JIBClr:                    JIBClr Intrinsic.
* intrinsics, JIBits:                    JIBits Intrinsic.
* intrinsics, JIBSet:                    JIBSet Intrinsic.
* intrinsics, JIDiM:                     JIDiM Intrinsic.
* intrinsics, JIDInt:                    JIDInt Intrinsic.
* intrinsics, JIDNnt:                    JIDNnt Intrinsic.
* intrinsics, JIEOr:                     JIEOr Intrinsic.
* intrinsics, JIFix:                     JIFix Intrinsic.
* intrinsics, JInt:                      JInt Intrinsic.
* intrinsics, JIOr:                      JIOr Intrinsic.
* intrinsics, JIQint:                    JIQint Intrinsic.
* intrinsics, JIQNnt:                    JIQNnt Intrinsic.
* intrinsics, JIShft:                    JIShft Intrinsic.
* intrinsics, JIShftC:                   JIShftC Intrinsic.
* intrinsics, JISign:                    JISign Intrinsic.
* intrinsics, JMax0:                     JMax0 Intrinsic.
* intrinsics, JMax1:                     JMax1 Intrinsic.
* intrinsics, JMin0:                     JMin0 Intrinsic.
* intrinsics, JMin1:                     JMin1 Intrinsic.
* intrinsics, JMod:                      JMod Intrinsic.
* intrinsics, JNInt:                     JNInt Intrinsic.
* intrinsics, JNot:                      JNot Intrinsic.
* intrinsics, JZExt:                     JZExt Intrinsic.
* intrinsics, Kill <1>:                  Kill Intrinsic (function).
* intrinsics, Kill:                      Kill Intrinsic (subroutine).
* intrinsics, Kind:                      Kind Intrinsic.
* intrinsics, LBound:                    LBound Intrinsic.
* intrinsics, Len:                       Len Intrinsic.
* intrinsics, Len_Trim:                  Len_Trim Intrinsic.
* intrinsics, LGe:                       LGe Intrinsic.
* intrinsics, LGt:                       LGt Intrinsic.
* intrinsics, Link <1>:                  Link Intrinsic (function).
* intrinsics, Link:                      Link Intrinsic (subroutine).
* intrinsics, LLe:                       LLe Intrinsic.
* intrinsics, LLt:                       LLt Intrinsic.
* intrinsics, LnBlnk:                    LnBlnk Intrinsic.
* intrinsics, Loc:                       Loc Intrinsic.
* intrinsics, Log:                       Log Intrinsic.
* intrinsics, Log10:                     Log10 Intrinsic.
* intrinsics, Logical:                   Logical Intrinsic.
* intrinsics, Long:                      Long Intrinsic.
* intrinsics, LShift:                    LShift Intrinsic.
* intrinsics, LStat <1>:                 LStat Intrinsic (function).
* intrinsics, LStat:                     LStat Intrinsic (subroutine).
* intrinsics, LTime:                     LTime Intrinsic.
* intrinsics, MatMul:                    MatMul Intrinsic.
* intrinsics, Max:                       Max Intrinsic.
* intrinsics, Max0:                      Max0 Intrinsic.
* intrinsics, Max1:                      Max1 Intrinsic.
* intrinsics, MaxExponent:               MaxExponent Intrinsic.
* intrinsics, MaxLoc:                    MaxLoc Intrinsic.
* intrinsics, MaxVal:                    MaxVal Intrinsic.
* intrinsics, MClock:                    MClock Intrinsic.
* intrinsics, MClock8:                   MClock8 Intrinsic.
* intrinsics, Merge:                     Merge Intrinsic.
* intrinsics, MIL-STD 1753:              Fortran Dialect Options.
* intrinsics, Min:                       Min Intrinsic.
* intrinsics, Min0:                      Min0 Intrinsic.
* intrinsics, Min1:                      Min1 Intrinsic.
* intrinsics, MinExponent:               MinExponent Intrinsic.
* intrinsics, MinLoc:                    MinLoc Intrinsic.
* intrinsics, MinVal:                    MinVal Intrinsic.
* intrinsics, Mod:                       Mod Intrinsic.
* intrinsics, Modulo:                    Modulo Intrinsic.
* intrinsics, MvBits:                    MvBits Intrinsic.
* intrinsics, Nearest:                   Nearest Intrinsic.
* intrinsics, NInt:                      NInt Intrinsic.
* intrinsics, Not:                       Not Intrinsic.
* intrinsics, Or <1>:                    Bit Operations on Floating-point Data.
* intrinsics, Or:                        Or Intrinsic.
* intrinsics, others:                    Other Intrinsics.
* intrinsics, Pack:                      Pack Intrinsic.
* intrinsics, PError:                    PError Intrinsic.
* intrinsics, Precision:                 Precision Intrinsic.
* intrinsics, Present:                   Present Intrinsic.
* intrinsics, Product:                   Product Intrinsic.
* intrinsics, QAbs:                      QAbs Intrinsic.
* intrinsics, QACos:                     QACos Intrinsic.
* intrinsics, QACosD:                    QACosD Intrinsic.
* intrinsics, QASin:                     QASin Intrinsic.
* intrinsics, QASinD:                    QASinD Intrinsic.
* intrinsics, QATan:                     QATan Intrinsic.
* intrinsics, QATan2:                    QATan2 Intrinsic.
* intrinsics, QATan2D:                   QATan2D Intrinsic.
* intrinsics, QATanD:                    QATanD Intrinsic.
* intrinsics, QCos:                      QCos Intrinsic.
* intrinsics, QCosD:                     QCosD Intrinsic.
* intrinsics, QCosH:                     QCosH Intrinsic.
* intrinsics, QDiM:                      QDiM Intrinsic.
* intrinsics, QExp:                      QExp Intrinsic.
* intrinsics, QExt:                      QExt Intrinsic.
* intrinsics, QExtD:                     QExtD Intrinsic.
* intrinsics, QFloat:                    QFloat Intrinsic.
* intrinsics, QInt:                      QInt Intrinsic.
* intrinsics, QLog:                      QLog Intrinsic.
* intrinsics, QLog10:                    QLog10 Intrinsic.
* intrinsics, QMax1:                     QMax1 Intrinsic.
* intrinsics, QMin1:                     QMin1 Intrinsic.
* intrinsics, QMod:                      QMod Intrinsic.
* intrinsics, QNInt:                     QNInt Intrinsic.
* intrinsics, QSin:                      QSin Intrinsic.
* intrinsics, QSinD:                     QSinD Intrinsic.
* intrinsics, QSinH:                     QSinH Intrinsic.
* intrinsics, QSqRt:                     QSqRt Intrinsic.
* intrinsics, QTan:                      QTan Intrinsic.
* intrinsics, QTanD:                     QTanD Intrinsic.
* intrinsics, QTanH:                     QTanH Intrinsic.
* intrinsics, Radix:                     Radix Intrinsic.
* intrinsics, Rand:                      Rand Intrinsic.
* intrinsics, Random_Number:             Random_Number Intrinsic.
* intrinsics, Random_Seed:               Random_Seed Intrinsic.
* intrinsics, Range:                     Range Intrinsic.
* intrinsics, Real <1>:                  Real Intrinsic.
* intrinsics, Real:                      REAL() and AIMAG() of Complex.
* intrinsics, RealPart:                  RealPart Intrinsic.
* intrinsics, Rename <1>:                Rename Intrinsic (function).
* intrinsics, Rename:                    Rename Intrinsic (subroutine).
* intrinsics, Repeat:                    Repeat Intrinsic.
* intrinsics, Reshape:                   Reshape Intrinsic.
* intrinsics, RRSpacing:                 RRSpacing Intrinsic.
* intrinsics, RShift:                    RShift Intrinsic.
* intrinsics, Scale:                     Scale Intrinsic.
* intrinsics, Scan:                      Scan Intrinsic.
* intrinsics, Secnds:                    Secnds Intrinsic.
* intrinsics, Second <1>:                Second Intrinsic (subroutine).
* intrinsics, Second:                    Second Intrinsic (function).
* intrinsics, Selected_Int_Kind:         Selected_Int_Kind Intrinsic.
* intrinsics, Selected_Real_Kind:        Selected_Real_Kind Intrinsic.
* intrinsics, Set_Exponent:              Set_Exponent Intrinsic.
* intrinsics, Shape:                     Shape Intrinsic.
* intrinsics, Shift:                     Bit Operations on Floating-point Data.
* intrinsics, Short:                     Short Intrinsic.
* intrinsics, Sign:                      Sign Intrinsic.
* intrinsics, Signal <1>:                Signal Intrinsic (function).
* intrinsics, Signal:                    Signal Intrinsic (subroutine).
* intrinsics, Sin:                       Sin Intrinsic.
* intrinsics, SinD:                      SinD Intrinsic.
* intrinsics, SinH:                      SinH Intrinsic.
* intrinsics, Sleep:                     Sleep Intrinsic.
* intrinsics, Sngl:                      Sngl Intrinsic.
* intrinsics, SnglQ:                     SnglQ Intrinsic.
* intrinsics, Spacing:                   Spacing Intrinsic.
* intrinsics, Spread:                    Spread Intrinsic.
* intrinsics, SqRt:                      SqRt Intrinsic.
* intrinsics, SRand:                     SRand Intrinsic.
* intrinsics, Stat <1>:                  Stat Intrinsic (function).
* intrinsics, Stat:                      Stat Intrinsic (subroutine).
* intrinsics, Sum:                       Sum Intrinsic.
* intrinsics, SymLnk <1>:                SymLnk Intrinsic (function).
* intrinsics, SymLnk:                    SymLnk Intrinsic (subroutine).
* intrinsics, System <1>:                System Intrinsic (function).
* intrinsics, System:                    System Intrinsic (subroutine).
* intrinsics, System_Clock:              System_Clock Intrinsic.
* intrinsics, table of:                  Table of Intrinsic Functions.
* intrinsics, Tan:                       Tan Intrinsic.
* intrinsics, TanD:                      TanD Intrinsic.
* intrinsics, TanH:                      TanH Intrinsic.
* intrinsics, Time <1>:                  Time Intrinsic (VXT).
* intrinsics, Time:                      Time Intrinsic (UNIX).
* intrinsics, Time8:                     Time8 Intrinsic.
* intrinsics, Tiny:                      Tiny Intrinsic.
* intrinsics, Transfer:                  Transfer Intrinsic.
* intrinsics, Transpose:                 Transpose Intrinsic.
* intrinsics, Trim:                      Trim Intrinsic.
* intrinsics, TtyNam <1>:                TtyNam Intrinsic (function).
* intrinsics, TtyNam:                    TtyNam Intrinsic (subroutine).
* intrinsics, UBound:                    UBound Intrinsic.
* intrinsics, UMask <1>:                 UMask Intrinsic (function).
* intrinsics, UMask:                     UMask Intrinsic (subroutine).
* intrinsics, UNIX:                      Fortran Dialect Options.
* intrinsics, Unlink <1>:                Unlink Intrinsic (function).
* intrinsics, Unlink:                    Unlink Intrinsic (subroutine).
* intrinsics, Unpack:                    Unpack Intrinsic.
* intrinsics, Verify:                    Verify Intrinsic.
* intrinsics, VXT:                       Fortran Dialect Options.
* intrinsics, XOr:                       XOr Intrinsic.
* intrinsics, ZAbs:                      ZAbs Intrinsic.
* intrinsics, ZCos:                      ZCos Intrinsic.
* intrinsics, ZExp:                      ZExp Intrinsic.
* intrinsics, ZExt:                      ZExt Intrinsic.
* intrinsics, ZLog:                      ZLog Intrinsic.
* intrinsics, ZSin:                      ZSin Intrinsic.
* intrinsics, ZSqRt:                     ZSqRt Intrinsic.
* Introduction:                          Top.
* invalid assembly code:                 Bug Criteria.
* invalid input:                         Bug Criteria.
* IOr intrinsic:                         IOr Intrinsic.
* IOSTAT=:                               Run-time Library Errors.
* IRand intrinsic:                       IRand Intrinsic.
* IsaTty intrinsic:                      IsaTty Intrinsic.
* IShft intrinsic:                       IShft Intrinsic.
* IShftC intrinsic:                      IShftC Intrinsic.
* ISign intrinsic:                       ISign Intrinsic.
* iterative DO:                          Optimize Options.
* ITime intrinsic:                       ITime Intrinsic.
* ix86 floating-point:                   Floating-point precision.
* ix86 FPU stack:                        Inconsistent Calling Sequences.
* IZExt intrinsic:                       IZExt Intrinsic.
* JCB002 program:                        Generics and Specifics.
* JCB003 program:                        CMPAMBIG.
* JIAbs intrinsic:                       JIAbs Intrinsic.
* JIAnd intrinsic:                       JIAnd Intrinsic.
* JIBClr intrinsic:                      JIBClr Intrinsic.
* JIBits intrinsic:                      JIBits Intrinsic.
* JIBSet intrinsic:                      JIBSet Intrinsic.
* JIDiM intrinsic:                       JIDiM Intrinsic.
* JIDInt intrinsic:                      JIDInt Intrinsic.
* JIDNnt intrinsic:                      JIDNnt Intrinsic.
* JIEOr intrinsic:                       JIEOr Intrinsic.
* JIFix intrinsic:                       JIFix Intrinsic.
* JInt intrinsic:                        JInt Intrinsic.
* JIOr intrinsic:                        JIOr Intrinsic.
* JIQint intrinsic:                      JIQint Intrinsic.
* JIQNnt intrinsic:                      JIQNnt Intrinsic.
* JIShft intrinsic:                      JIShft Intrinsic.
* JIShftC intrinsic:                     JIShftC Intrinsic.
* JISign intrinsic:                      JISign Intrinsic.
* JMax0 intrinsic:                       JMax0 Intrinsic.
* JMax1 intrinsic:                       JMax1 Intrinsic.
* JMin0 intrinsic:                       JMin0 Intrinsic.
* JMin1 intrinsic:                       JMin1 Intrinsic.
* JMod intrinsic:                        JMod Intrinsic.
* JNInt intrinsic:                       JNInt Intrinsic.
* JNot intrinsic:                        JNot Intrinsic.
* JZExt intrinsic:                       JZExt Intrinsic.
* keywords, RECURSIVE:                   RECURSIVE Keyword.
* Kill intrinsic <1>:                    Kill Intrinsic (function).
* Kill intrinsic:                        Kill Intrinsic (subroutine).
* Kind intrinsic:                        Kind Intrinsic.
* KIND= notation:                        Kind Notation.
* known causes of trouble:               Trouble.
* lack of recursion:                     RECURSIVE Keyword.
* language, dialect options:             Fortran Dialect Options.
* language, features:                    Direction of Language Development.
* language, incorrect use of:            What is GNU Fortran?.
* LANGUAGES macro ignored:               LANGUAGES Macro Ignored.
* large aggregate areas:                 Known Bugs.
* large common blocks:                   Large Common Blocks.
* large initialization:                  Large Initialization.
* layout of COMMON blocks:               Aligned Data.
* LBound intrinsic:                      LBound Intrinsic.
* ld command:                            What is GNU Fortran?.
* ld, can't find _bsearch:               Missing strtoul or bsearch.
* ld, can't find _main:                  Cannot Link Fortran Programs.
* ld, can't find _strtoul:               Missing strtoul or bsearch.
* ld, can't find strange names:          Cannot Link Fortran Programs.
* ld, error linking f771:                Missing strtoul or bsearch.
* ld, error linking user code:           Cannot Link Fortran Programs.
* ld, errors:                            Large Common Blocks.
* left angle:                            Character Set.
* left bracket:                          Character Set.
* legacy code:                           Collected Fortran Wisdom.
* Len intrinsic:                         Len Intrinsic.
* Len_Trim intrinsic:                    Len_Trim Intrinsic.
* length of source lines:                Fortran Dialect Options.
* letters, lowercase:                    Case Sensitivity.
* letters, uppercase:                    Case Sensitivity.
* LGe intrinsic:                         LGe Intrinsic.
* LGt intrinsic:                         LGt Intrinsic.
* libc, non-ANSI or non-default:         Strange Behavior at Run Time.
* libf2c library:                        What is GNU Fortran?.
* libg2c library:                        What is GNU Fortran?.
* libraries:                             What is GNU Fortran?.
* libraries, containing BLOCK DATA:      Block Data and Libraries.
* libraries, libf2c:                     What is GNU Fortran?.
* libraries, libg2c:                     What is GNU Fortran?.
* limits, array dimensions:              Compiler Limits.
* limits, array size:                    Array Size.
* limits, compiler:                      Compiler Limits.
* limits, continuation lines <1>:        Compiler Limits.
* limits, continuation lines:            Continuation Line.
* limits, lengths of names <1>:          Compiler Limits.
* limits, lengths of names:              Syntactic Items.
* limits, lengths of source lines:       Fortran Dialect Options.
* limits, multi-dimension arrays:        Array Size.
* limits, on character-variable length:  Character-variable Length.
* limits, rank:                          Compiler Limits.
* limits, run-time library:              Run-time Environment Limits.
* limits, timings <1>:                   Secnds Intrinsic.
* limits, timings <2>:                   DTime Intrinsic (function).
* limits, timings <3>:                   Time8 Intrinsic.
* limits, timings <4>:                   Time Intrinsic (UNIX).
* limits, timings <5>:                   System_Clock Intrinsic.
* limits, timings <6>:                   Second Intrinsic (subroutine).
* limits, timings <7>:                   Second Intrinsic (function).
* limits, timings <8>:                   MClock8 Intrinsic.
* limits, timings <9>:                   MClock Intrinsic.
* limits, timings <10>:                  ETime Intrinsic (function).
* limits, timings <11>:                  ETime Intrinsic (subroutine).
* limits, timings <12>:                  DTime Intrinsic (subroutine).
* limits, timings:                       CPU_Time Intrinsic.
* limits, Y10K <1>:                      Time Intrinsic (VXT).
* limits, Y10K <2>:                      IDate Intrinsic (UNIX).
* limits, Y10K <3>:                      FDate Intrinsic (function).
* limits, Y10K <4>:                      FDate Intrinsic (subroutine).
* limits, Y10K:                          Date_and_Time Intrinsic.
* limits, Y2K:                           IDate Intrinsic (VXT).
* lines:                                 Lines.
* lines, continuation:                   Continuation Line.
* lines, length:                         Fortran Dialect Options.
* lines, long:                           Long Lines.
* lines, short:                          Short Lines.
* Link intrinsic <1>:                    Link Intrinsic (function).
* Link intrinsic:                        Link Intrinsic (subroutine).
* linking:                               What is GNU Fortran?.
* linking against non-standard library:  Strange Behavior at Run Time.
* linking error for f771:                Missing strtoul or bsearch.
* linking error for user code:           Cannot Link Fortran Programs.
* linking error, user code:              Cannot Link Fortran Programs.
* linking with C:                        Interoperating with C and C++.
* linking, errors:                       Large Common Blocks.
* LLe intrinsic:                         LLe Intrinsic.
* LLt intrinsic:                         LLt Intrinsic.
* LnBlnk intrinsic:                      LnBlnk Intrinsic.
* Loc intrinsic:                         Loc Intrinsic.
* local equivalence areas <1>:           Known Bugs.
* local equivalence areas:               Local Equivalence Areas.
* Log intrinsic:                         Log Intrinsic.
* Log10 intrinsic:                       Log10 Intrinsic.
* logical expressions, comparing:        Equivalence Versus Equality.
* Logical intrinsic:                     Logical Intrinsic.
* LOGICAL(KIND=1) type:                  Compiler Types.
* LOGICAL(KIND=2) type:                  Compiler Types.
* LOGICAL(KIND=3) type:                  Compiler Types.
* LOGICAL(KIND=6) type:                  Compiler Types.
* LOGICAL*1 support:                     Popular Non-standard Types.
* Long intrinsic:                        Long Intrinsic.
* long source lines:                     Long Lines.
* long time:                             Timer Wraparounds.
* loops, optimizing:                     Optimize Options.
* loops, speeding up:                    Optimize Options.
* loops, unrolling:                      Optimize Options.
* lowercase letters:                     Case Sensitivity.
* LShift intrinsic:                      LShift Intrinsic.
* LStat intrinsic <1>:                   LStat Intrinsic (function).
* LStat intrinsic:                       LStat Intrinsic (subroutine).
* LTime intrinsic:                       LTime Intrinsic.
* machine code:                          What is GNU Fortran?.
* macro options:                         Shorthand Options.
* main program unit, debugging:          Main Program Unit.
* main():                                Main Program Unit.
* MAIN__():                              Main Program Unit.
* make clean:                            Cleanup Kills Stage Directories.
* Makefile example:                      Bug Criteria.
* MAP statement:                         STRUCTURE UNION RECORD MAP.
* MatMul intrinsic:                      MatMul Intrinsic.
* Max intrinsic:                         Max Intrinsic.
* Max0 intrinsic:                        Max0 Intrinsic.
* Max1 intrinsic:                        Max1 Intrinsic.
* MaxExponent intrinsic:                 MaxExponent Intrinsic.
* maximum number of dimensions:          Compiler Limits.
* maximum rank:                          Compiler Limits.
* maximum stackable size:                Maximum Stackable Size.
* maximum unit number <1>:               Large File Unit Numbers.
* maximum unit number:                   Larger File Unit Numbers.
* MaxLoc intrinsic:                      MaxLoc Intrinsic.
* MaxVal intrinsic:                      MaxVal Intrinsic.
* MClock intrinsic:                      MClock Intrinsic.
* MClock8 intrinsic:                     MClock8 Intrinsic.
* memory usage, of compiler:             Known Bugs.
* memory utilization:                    Large Initialization.
* Merge intrinsic:                       Merge Intrinsic.
* messages, run-time:                    Run-time Library Errors.
* messages, warning:                     Warning Options.
* messages, warning and error:           Warnings and Errors.
* mil intrinsics group:                  Intrinsic Groups.
* MIL-STD 1753 <1>:                      MIL-STD 1753.
* MIL-STD 1753 <2>:                      END DO.
* MIL-STD 1753 <3>:                      DO WHILE.
* MIL-STD 1753:                          Fortran Dialect Options.
* Min intrinsic:                         Min Intrinsic.
* Min0 intrinsic:                        Min0 Intrinsic.
* Min1 intrinsic:                        Min1 Intrinsic.
* MinExponent intrinsic:                 MinExponent Intrinsic.
* MinLoc intrinsic:                      MinLoc Intrinsic.
* MinVal intrinsic:                      MinVal Intrinsic.
* missing debug features:                Debugging Options.
* mistakes:                              What is GNU Fortran?.
* mistyped functions:                    Not My Type.
* mistyped variables:                    Not My Type.
* Mod intrinsic:                         Mod Intrinsic.
* modifying g77:                         Overall Options.
* Modulo intrinsic:                      Modulo Intrinsic.
* multi-dimension arrays:                Array Size.
* MvBits intrinsic:                      MvBits Intrinsic.
* MXUNIT <1>:                            Large File Unit Numbers.
* MXUNIT:                                Larger File Unit Numbers.
* name space:                            Mangling of Names.
* NAMELIST statement:                    NAMELIST.
* naming conflicts:                      Multiple Definitions of External Names.
* naming issues:                         Mangling of Names.
* naming programs:                       Nothing Happens.
* NaN values:                            Floating-point Exception Handling.
* Nearest intrinsic:                     Nearest Intrinsic.
* negative forms of options:             Invoking G77.
* negative time:                         Timer Wraparounds.
* Netlib <1>:                            Increasing Precision/Range.
* Netlib:                                C Interfacing Tools.
* network file system <1>:               Output Assumed To Flush.
* network file system:                   Always Flush Output.
* new users:                             Getting Started.
* newbies:                               Getting Started.
* NeXTStep problems:                     NeXTStep Problems.
* NFS <1>:                               Output Assumed To Flush.
* NFS:                                   Always Flush Output.
* NInt intrinsic:                        NInt Intrinsic.
* nonportable conversions:               Nonportable Conversions.
* Not intrinsic:                         Not Intrinsic.
* nothing happens:                       Nothing Happens.
* null arguments:                        Ugly Null Arguments.
* null byte, trailing:                   Character and Hollerith Constants.
* null CHARACTER strings:                Character Type.
* number of continuation lines:          Continuation Line.
* number of dimensions, maximum:         Compiler Limits.
* number of trips:                       Loops.
* O edit descriptor:                     I/O.
* octal constants:                       Double Quote Meaning.
* omitting arguments:                    Ugly Null Arguments.
* one-trip DO loops:                     Fortran Dialect Options.
* open angle:                            Character Set.
* open bracket:                          Character Set.
* OPEN statement:                        OPEN CLOSE and INQUIRE Keywords.
* optimization, for Pentium:             Aligned Data.
* optimize options:                      Optimize Options.
* options, --driver <1>:                 Changes.
* options, --driver:                     News.
* options, -falias-check <1>:            Aliasing Assumed To Work.
* options, -falias-check:                Code Gen Options.
* options, -fargument-alias <1>:         Aliasing Assumed To Work.
* options, -fargument-alias:             Code Gen Options.
* options, -fargument-noalias <1>:       Aliasing Assumed To Work.
* options, -fargument-noalias:           Code Gen Options.
* options, -fbadu77-intrinsics-delete:   Fortran Dialect Options.
* options, -fbadu77-intrinsics-disable:  Fortran Dialect Options.
* options, -fbadu77-intrinsics-enable:   Fortran Dialect Options.
* options, -fbadu77-intrinsics-hide:     Fortran Dialect Options.
* options, -fcaller-saves:               Optimize Options.
* options, -fcase-initcap:               Fortran Dialect Options.
* options, -fcase-lower:                 Fortran Dialect Options.
* options, -fcase-preserve:              Fortran Dialect Options.
* options, -fcase-strict-lower:          Fortran Dialect Options.
* options, -fcase-strict-upper:          Fortran Dialect Options.
* options, -fcase-upper:                 Fortran Dialect Options.
* options, -fdebug-kludge:               Code Gen Options.
* options, -fdelayed-branch:             Optimize Options.
* options, -fdollar-ok:                  Fortran Dialect Options.
* options, -femulate-complex:            Code Gen Options.
* options, -fexpensive-optimizations:    Optimize Options.
* options, -ff2c-intrinsics-delete:      Fortran Dialect Options.
* options, -ff2c-intrinsics-disable:     Fortran Dialect Options.
* options, -ff2c-intrinsics-enable:      Fortran Dialect Options.
* options, -ff2c-intrinsics-hide:        Fortran Dialect Options.
* options, -ff2c-library:                Code Gen Options.
* options, -ff66:                        Shorthand Options.
* options, -ff77:                        Shorthand Options.
* options, -ff90:                        Fortran Dialect Options.
* options, -ff90-intrinsics-delete:      Fortran Dialect Options.
* options, -ff90-intrinsics-disable:     Fortran Dialect Options.
* options, -ff90-intrinsics-enable:      Fortran Dialect Options.
* options, -ff90-intrinsics-hide:        Fortran Dialect Options.
* options, -ffast-math:                  Optimize Options.
* options, -ffixed-line-length-N:        Fortran Dialect Options.
* options, -ffloat-store:                Optimize Options.
* options, -fforce-addr:                 Optimize Options.
* options, -fforce-mem:                  Optimize Options.
* options, -ffree-form:                  Fortran Dialect Options.
* options, -fgnu-intrinsics-delete:      Fortran Dialect Options.
* options, -fgnu-intrinsics-disable:     Fortran Dialect Options.
* options, -fgnu-intrinsics-enable:      Fortran Dialect Options.
* options, -fgnu-intrinsics-hide:        Fortran Dialect Options.
* options, -fGROUP-intrinsics-hide:      Overly Convenient Options.
* options, -finit-local-zero <1>:        Overly Convenient Options.
* options, -finit-local-zero:            Code Gen Options.
* options, -fintrin-case-any:            Fortran Dialect Options.
* options, -fintrin-case-initcap:        Fortran Dialect Options.
* options, -fintrin-case-lower:          Fortran Dialect Options.
* options, -fintrin-case-upper:          Fortran Dialect Options.
* options, -fmatch-case-any:             Fortran Dialect Options.
* options, -fmatch-case-initcap:         Fortran Dialect Options.
* options, -fmatch-case-lower:           Fortran Dialect Options.
* options, -fmatch-case-upper:           Fortran Dialect Options.
* options, -fmil-intrinsics-delete:      Fortran Dialect Options.
* options, -fmil-intrinsics-disable:     Fortran Dialect Options.
* options, -fmil-intrinsics-enable:      Fortran Dialect Options.
* options, -fmil-intrinsics-hide:        Fortran Dialect Options.
* options, -fno-argument-noalias-global <1>: Aliasing Assumed To Work.
* options, -fno-argument-noalias-global: Code Gen Options.
* options, -fno-automatic <1>:           Overly Convenient Options.
* options, -fno-automatic:               Code Gen Options.
* options, -fno-backslash:               Fortran Dialect Options.
* options, -fno-common:                  Code Gen Options.
* options, -fno-f2c <1>:                 Avoid f2c Compatibility.
* options, -fno-f2c:                     Code Gen Options.
* options, -fno-f77:                     Shorthand Options.
* options, -fno-fixed-form:              Fortran Dialect Options.
* options, -fno-globals:                 Code Gen Options.
* options, -fno-ident:                   Code Gen Options.
* options, -fno-inline:                  Optimize Options.
* options, -fno-move-all-movables:       Optimize Options.
* options, -fno-reduce-all-givs:         Optimize Options.
* options, -fno-rerun-loop-opt:          Optimize Options.
* options, -fno-second-underscore:       Code Gen Options.
* options, -fno-silent:                  Overall Options.
* options, -fno-ugly:                    Shorthand Options.
* options, -fno-ugly-args:               Fortran Dialect Options.
* options, -fno-ugly-init:               Fortran Dialect Options.
* options, -fno-underscoring <1>:        Names.
* options, -fno-underscoring:            Code Gen Options.
* options, -fonetrip:                    Fortran Dialect Options.
* options, -fpack-struct:                Code Gen Options.
* options, -fpcc-struct-return:          Code Gen Options.
* options, -fpedantic:                   Warning Options.
* options, -fPIC:                        News.
* options, -freg-struct-return:          Code Gen Options.
* options, -frerun-cse-after-loop:       Optimize Options.
* options, -fschedule-insns:             Optimize Options.
* options, -fschedule-insns2:            Optimize Options.
* options, -fset-g77-defaults:           Overall Options.
* options, -fshort-double:               Code Gen Options.
* options, -fsource-case-lower:          Fortran Dialect Options.
* options, -fsource-case-preserve:       Fortran Dialect Options.
* options, -fsource-case-upper:          Fortran Dialect Options.
* options, -fstrength-reduce:            Optimize Options.
* options, -fsymbol-case-any:            Fortran Dialect Options.
* options, -fsymbol-case-initcap:        Fortran Dialect Options.
* options, -fsymbol-case-lower:          Fortran Dialect Options.
* options, -fsymbol-case-upper:          Fortran Dialect Options.
* options, -fsyntax-only:                Warning Options.
* options, -ftypeless-boz:               Fortran Dialect Options.
* options, -fugly:                       Shorthand Options.
* options, -fugly-assign:                Fortran Dialect Options.
* options, -fugly-assumed:               Fortran Dialect Options.
* options, -fugly-comma:                 Fortran Dialect Options.
* options, -fugly-complex:               Fortran Dialect Options.
* options, -fugly-logint:                Fortran Dialect Options.
* options, -funix-intrinsics-delete:     Fortran Dialect Options.
* options, -funix-intrinsics-disable:    Fortran Dialect Options.
* options, -funix-intrinsics-enable:     Fortran Dialect Options.
* options, -funix-intrinsics-hide:       Fortran Dialect Options.
* options, -funroll-all-loops:           Optimize Options.
* options, -funroll-loops:               Optimize Options.
* options, -fversion:                    Overall Options.
* options, -fvxt:                        Fortran Dialect Options.
* options, -fvxt-intrinsics-delete:      Fortran Dialect Options.
* options, -fvxt-intrinsics-disable:     Fortran Dialect Options.
* options, -fvxt-intrinsics-enable:      Fortran Dialect Options.
* options, -fvxt-intrinsics-hide:        Fortran Dialect Options.
* options, -fzeros:                      Code Gen Options.
* options, -g:                           Debugging Options.
* options, -I-:                          Directory Options.
* options, -Idir:                        Directory Options.
* options, -malign-double <1>:           Aligned Data.
* options, -malign-double:               Optimize Options.
* options, -Nl:                          Compiler Limits.
* options, -Nx:                          Compiler Limits.
* options, -pedantic:                    Warning Options.
* options, -pedantic-errors:             Warning Options.
* options, -v:                           G77 and GCC.
* options, -W:                           Warning Options.
* options, -w:                           Warning Options.
* options, -Waggregate-return:           Warning Options.
* options, -Wall:                        Warning Options.
* options, -Wcomment:                    Warning Options.
* options, -Wconversion:                 Warning Options.
* options, -Werror:                      Warning Options.
* options, -Wformat:                     Warning Options.
* options, -Wid-clash-LEN:               Warning Options.
* options, -Wimplicit:                   Warning Options.
* options, -Wlarger-than-LEN:            Warning Options.
* options, -Wno-globals:                 Warning Options.
* options, -Wparentheses:                Warning Options.
* options, -Wredundant-decls:            Warning Options.
* options, -Wshadow:                     Warning Options.
* options, -Wsurprising:                 Warning Options.
* options, -Wswitch:                     Warning Options.
* options, -Wtraditional:                Warning Options.
* options, -Wuninitialized:              Warning Options.
* options, -Wunused:                     Warning Options.
* options, -x f77-cpp-input:             LEX.
* options, code generation:              Code Gen Options.
* options, debugging:                    Debugging Options.
* options, dialect:                      Fortran Dialect Options.
* options, directory search:             Directory Options.
* options, GNU Fortran command:          Invoking G77.
* options, macro:                        Shorthand Options.
* options, negative forms:               Invoking G77.
* options, optimization:                 Optimize Options.
* options, overall:                      Overall Options.
* options, overly convenient:            Overly Convenient Options.
* options, preprocessor:                 Preprocessor Options.
* options, shorthand:                    Shorthand Options.
* options, warnings:                     Warning Options.
* Or intrinsic <1>:                      Bit Operations on Floating-point Data.
* Or intrinsic:                          Or Intrinsic.
* order of evaluation, side effects:     Order of Side Effects.
* ordering, array:                       Arrays.
* other intrinsics:                      Other Intrinsics.
* output, flushing <1>:                  Output Assumed To Flush.
* output, flushing:                      Always Flush Output.
* overall options:                       Overall Options.
* overflow:                              Warning Options.
* overlapping arguments:                 Aliasing Assumed To Work.
* overlays:                              Aliasing Assumed To Work.
* overly convenient options:             Overly Convenient Options.
* overwritten data:                      Strange Behavior at Run Time.
* Pack intrinsic:                        Pack Intrinsic.
* padding:                               Known Bugs.
* parallel processing:                   Support for Threads.
* PARAMETER statement <1>:               Old-style PARAMETER Statements.
* PARAMETER statement:                   Intrinsics in PARAMETER Statements.
* parameters, unused:                    Warning Options.
* patch files:                           Patching GNU CC.
* paths, search:                         Directory Options.
* PDB:                                   Portable Unformatted Files.
* pedantic compilation:                  Pedantic Compilation.
* Pentium optimizations:                 Aligned Data.
* percent sign:                          Character Set.
* PError intrinsic:                      PError Intrinsic.
* placing initialization statements:     Initializing Before Specifying.
* POINTER statement:                     POINTER Statements.
* pointers <1>:                          Ugly Assigned Labels.
* pointers:                              Kind Notation.
* pound sign:                            Character Set.
* Precision intrinsic:                   Precision Intrinsic.
* precision, increasing:                 Increasing Precision/Range.
* prefix-radix constants:                Fortran Dialect Options.
* preprocessor <1>:                      LEX.
* preprocessor <2>:                      Bug Reporting.
* preprocessor <3>:                      Cpp-style directives.
* preprocessor <4>:                      Overall Options.
* preprocessor:                          What is GNU Fortran?.
* preprocessor options:                  Preprocessor Options.
* prerequisites:                         Prerequisites.
* Present intrinsic:                     Present Intrinsic.
* printing compilation status:           Overall Options.
* printing main source:                  Known Bugs.
* printing version information <1>:      Overall Options.
* printing version information:          What is GNU Fortran?.
* problems installing:                   Problems Installing.
* procedures:                            Procedures.
* Product intrinsic:                     Product Intrinsic.
* PROGRAM statement:                     Main Program Unit.
* programs, cc1:                         What is GNU Fortran?.
* programs, cc1plus:                     What is GNU Fortran?.
* programs, compiling:                   G77 and GCC.
* programs, cpp <1>:                     LEX.
* programs, cpp <2>:                     Bug Reporting.
* programs, cpp <3>:                     Preprocessor Options.
* programs, cpp <4>:                     Overall Options.
* programs, cpp:                         What is GNU Fortran?.
* programs, f771:                        What is GNU Fortran?.
* programs, ratfor:                      Overall Options.
* programs, speeding up:                 Faster Programs.
* programs, test:                        Nothing Happens.
* Q edit descriptor:                     Q Edit Descriptor.
* QAbs intrinsic:                        QAbs Intrinsic.
* QACos intrinsic:                       QACos Intrinsic.
* QACosD intrinsic:                      QACosD Intrinsic.
* QASin intrinsic:                       QASin Intrinsic.
* QASinD intrinsic:                      QASinD Intrinsic.
* QATan intrinsic:                       QATan Intrinsic.
* QATan2 intrinsic:                      QATan2 Intrinsic.
* QATan2D intrinsic:                     QATan2D Intrinsic.
* QATanD intrinsic:                      QATanD Intrinsic.
* QCos intrinsic:                        QCos Intrinsic.
* QCosD intrinsic:                       QCosD Intrinsic.
* QCosH intrinsic:                       QCosH Intrinsic.
* QDiM intrinsic:                        QDiM Intrinsic.
* QExp intrinsic:                        QExp Intrinsic.
* QExt intrinsic:                        QExt Intrinsic.
* QExtD intrinsic:                       QExtD Intrinsic.
* QFloat intrinsic:                      QFloat Intrinsic.
* QInt intrinsic:                        QInt Intrinsic.
* QLog intrinsic:                        QLog Intrinsic.
* QLog10 intrinsic:                      QLog10 Intrinsic.
* QMax1 intrinsic:                       QMax1 Intrinsic.
* QMin1 intrinsic:                       QMin1 Intrinsic.
* QMod intrinsic:                        QMod Intrinsic.
* QNInt intrinsic:                       QNInt Intrinsic.
* QSin intrinsic:                        QSin Intrinsic.
* QSinD intrinsic:                       QSinD Intrinsic.
* QSinH intrinsic:                       QSinH Intrinsic.
* QSqRt intrinsic:                       QSqRt Intrinsic.
* QTan intrinsic:                        QTan Intrinsic.
* QTanD intrinsic:                       QTanD Intrinsic.
* QTanH intrinsic:                       QTanH Intrinsic.
* question mark:                         Character Set.
* questionable instructions:             What is GNU Fortran?.
* quick start:                           Quick Start.
* Radix intrinsic:                       Radix Intrinsic.
* Rand intrinsic:                        Rand Intrinsic.
* Random_Number intrinsic:               Random_Number Intrinsic.
* Random_Seed intrinsic:                 Random_Seed Intrinsic.
* range checking:                        Code Gen Options.
* Range intrinsic:                       Range Intrinsic.
* range, increasing:                     Increasing Precision/Range.
* rank, maximum:                         Compiler Limits.
* ratfor:                                Overall Options.
* Ratfor preprocessor:                   Overall Options.
* READONLY:                              READONLY Keyword.
* reads and writes, scheduling:          Aliasing Assumed To Work.
* Real intrinsic <1>:                    Real Intrinsic.
* Real intrinsic:                        REAL() and AIMAG() of Complex.
* real part:                             Ugly Complex Part Extraction.
* REAL(KIND=1) type:                     Compiler Types.
* REAL(KIND=2) type:                     Compiler Types.
* REAL*16 support:                       Full Support for Compiler Types.
* RealPart intrinsic:                    RealPart Intrinsic.
* recent versions <1>:                   Changes.
* recent versions:                       News.
* RECORD statement:                      STRUCTURE UNION RECORD MAP.
* recursion, lack of:                    RECURSIVE Keyword.
* RECURSIVE keyword:                     RECURSIVE Keyword.
* reference works:                       Language.
* Rename intrinsic <1>:                  Rename Intrinsic (function).
* Rename intrinsic:                      Rename Intrinsic (subroutine).
* Repeat intrinsic:                      Repeat Intrinsic.
* reporting bugs:                        Bugs.
* reporting compilation status:          Overall Options.
* requirements, GNU C:                   GNU C Required.
* Reshape intrinsic:                     Reshape Intrinsic.
* results, inconsistent:                 Floating-point Errors.
* RETURN statement <1>:                  Alternate Returns.
* RETURN statement:                      Functions.
* return type of functions:              Functions.
* right angle:                           Character Set.
* right bracket:                         Character Set.
* rounding errors:                       Floating-point Errors.
* row-major ordering:                    Arrays.
* RRSpacing intrinsic:                   RRSpacing Intrinsic.
* RShift intrinsic:                      RShift Intrinsic.
* run-time, dynamic allocation:          Arbitrary Concatenation.
* run-time, initialization:              Startup Code.
* run-time, library:                     What is GNU Fortran?.
* run-time, options:                     Code Gen Options.
* SAVE statement:                        Code Gen Options.
* saved variables:                       Variables Assumed To Be Saved.
* Scale intrinsic:                       Scale Intrinsic.
* Scan intrinsic:                        Scan Intrinsic.
* scheduling of reads and writes:        Aliasing Assumed To Work.
* scope <1>:                             Scope and Classes of Names.
* scope:                                 Scope of Names and Labels.
* search path:                           Directory Options.
* search paths, for included files:      Directory Options.
* Secnds intrinsic:                      Secnds Intrinsic.
* Second intrinsic <1>:                  Second Intrinsic (subroutine).
* Second intrinsic:                      Second Intrinsic (function).
* segmentation violation <1>:            Strange Behavior at Run Time.
* segmentation violation <2>:            Stack Overflow.
* segmentation violation <3>:            NeXTStep Problems.
* segmentation violation:                Maximum Stackable Size.
* Selected_Int_Kind intrinsic:           Selected_Int_Kind Intrinsic.
* Selected_Real_Kind intrinsic:          Selected_Real_Kind Intrinsic.
* semicolon <1>:                         Character Set.
* semicolon:                             Statements Comments Lines.
* sequence numbers:                      Better Source Model.
* Set_Exponent intrinsic:                Set_Exponent Intrinsic.
* Shape intrinsic:                       Shape Intrinsic.
* SHARED:                                READONLY Keyword.
* Shift intrinsic:                       Bit Operations on Floating-point Data.
* Short intrinsic:                       Short Intrinsic.
* short source lines:                    Short Lines.
* short time:                            Timer Wraparounds.
* shorthand options:                     Shorthand Options.
* side effects, order of evaluation:     Order of Side Effects.
* Sign intrinsic:                        Sign Intrinsic.
* signal 11:                             Signal 11 and Friends.
* Signal intrinsic <1>:                  Signal Intrinsic (function).
* Signal intrinsic:                      Signal Intrinsic (subroutine).
* signature of procedures:               Procedures.
* Sin intrinsic:                         Sin Intrinsic.
* SinD intrinsic:                        SinD Intrinsic.
* SinH intrinsic:                        SinH Intrinsic.
* Sleep intrinsic:                       Sleep Intrinsic.
* slow compiler:                         Large Initialization.
* Sngl intrinsic:                        Sngl Intrinsic.
* SnglQ intrinsic:                       SnglQ Intrinsic.
* Solaris:                               Strange Behavior at Run Time.
* source code <1>:                       Case Sensitivity.
* source code <2>:                       Source Form.
* source code <3>:                       Lines.
* source code:                           What is GNU Fortran?.
* source file:                           What is GNU Fortran?.
* source file format <1>:                Case Sensitivity.
* source file format <2>:                Source Form.
* source file format <3>:                Lines.
* source file format:                    Fortran Dialect Options.
* source format <1>:                     Source Form.
* source format:                         Lines.
* source lines, long:                    Long Lines.
* source lines, short:                   Short Lines.
* space <1>:                             Lines.
* space:                                 Character Set.
* space, endless printing of:            Strange Behavior at Run Time.
* space, padding with:                   Short Lines.
* Spacing intrinsic:                     Spacing Intrinsic.
* SPC <1>:                               Lines.
* SPC:                                   Character Set.
* speed, of compiler <1>:                Known Bugs.
* speed, of compiler:                    Large Initialization.
* speed, of loops:                       Optimize Options.
* speed, of programs:                    Faster Programs.
* spills of floating-point results:      Floating-point Errors.
* Spread intrinsic:                      Spread Intrinsic.
* SqRt intrinsic:                        SqRt Intrinsic.
* SRand intrinsic:                       SRand Intrinsic.
* stack, 387 coprocessor:                News.
* stack, aligned:                        Aligned Data.
* stack, allocation:                     Maximum Stackable Size.
* stack, overflow:                       Stack Overflow.
* stage directories:                     Cleanup Kills Stage Directories.
* standard, ANSI FORTRAN 77:             Language.
* standard, support for:                 Standard Support.
* startup code:                          Startup Code.
* Stat intrinsic <1>:                    Stat Intrinsic (function).
* Stat intrinsic:                        Stat Intrinsic (subroutine).
* statement labels, assigned:            Assigned Statement Labels.
* statements, ACCEPT:                    TYPE and ACCEPT I/O Statements.
* statements, ASSIGN <1>:                Assigned Statement Labels.
* statements, ASSIGN:                    Ugly Assigned Labels.
* statements, AUTOMATIC:                 AUTOMATIC Statement.
* statements, BLOCK DATA <1>:            Multiple Definitions of External Names.
* statements, BLOCK DATA:                Block Data and Libraries.
* statements, CLOSE:                     OPEN CLOSE and INQUIRE Keywords.
* statements, COMMON <1>:                Multiple Definitions of External Names.
* statements, COMMON:                    Common Blocks.
* statements, COMPLEX:                   Complex Variables.
* statements, CYCLE:                     CYCLE and EXIT.
* statements, DATA <1>:                  Known Bugs.
* statements, DATA:                      Code Gen Options.
* statements, DECODE:                    ENCODE and DECODE.
* statements, DIMENSION <1>:             Array Bounds Expressions.
* statements, DIMENSION <2>:             Adjustable Arrays.
* statements, DIMENSION:                 Arrays.
* statements, DO <1>:                    Loops.
* statements, DO:                        Warning Options.
* statements, ENCODE:                    ENCODE and DECODE.
* statements, ENTRY:                     Alternate Entry Points.
* statements, EQUIVALENCE:               Local Equivalence Areas.
* statements, EXIT:                      CYCLE and EXIT.
* statements, FORMAT:                    Expressions in FORMAT Statements.
* statements, FUNCTION <1>:              Functions.
* statements, FUNCTION:                  Procedures.
* statements, GOTO:                      Assigned Statement Labels.
* statements, IMPLICIT CHARACTER*(*):    Limitation on Implicit Declarations.
* statements, INQUIRE:                   OPEN CLOSE and INQUIRE Keywords.
* statements, MAP:                       STRUCTURE UNION RECORD MAP.
* statements, NAMELIST:                  NAMELIST.
* statements, OPEN:                      OPEN CLOSE and INQUIRE Keywords.
* statements, PARAMETER <1>:             Old-style PARAMETER Statements.
* statements, PARAMETER:                 Intrinsics in PARAMETER Statements.
* statements, POINTER:                   POINTER Statements.
* statements, PROGRAM:                   Main Program Unit.
* statements, RECORD:                    STRUCTURE UNION RECORD MAP.
* statements, RETURN <1>:                Alternate Returns.
* statements, RETURN:                    Functions.
* statements, SAVE:                      Code Gen Options.
* statements, separated by semicolon:    Statements Comments Lines.
* statements, STRUCTURE:                 STRUCTURE UNION RECORD MAP.
* statements, SUBROUTINE <1>:            Alternate Returns.
* statements, SUBROUTINE:                Procedures.
* statements, TYPE:                      TYPE and ACCEPT I/O Statements.
* statements, UNION:                     STRUCTURE UNION RECORD MAP.
* STATIC:                                AUTOMATIC Statement.
* static variables:                      Variables Assumed To Be Saved.
* status, compilation:                   Overall Options.
* storage association:                   Aliasing Assumed To Work.
* strings, empty:                        Character Type.
* strtoul:                               Missing strtoul or bsearch.
* STRUCTURE statement:                   STRUCTURE UNION RECORD MAP.
* structures:                            Known Bugs.
* submodels:                             Use Submodel Options.
* SUBROUTINE statement <1>:              Alternate Returns.
* SUBROUTINE statement:                  Procedures.
* subroutines:                           Alternate Returns.
* subscript checking:                    Code Gen Options.
* substring checking:                    Code Gen Options.
* suffixes, file name:                   Overall Options.
* Sum intrinsic:                         Sum Intrinsic.
* SunOS4:                                Missing strtoul or bsearch.
* support, Alpha:                        Known Bugs.
* support, ELF:                          News.
* support, f77:                          Backslash in Constants.
* support, FORTRAN 77:                   Standard Support.
* support, Fortran 90:                   Fortran 90 Support.
* support, gdb:                          Debugger Problems.
* suppressing warnings:                  Warning Options.
* symbol names <1>:                      Names.
* symbol names:                          Fortran Dialect Options.
* symbol names, scope and classes:       Scope and Classes of Names.
* symbol names, transforming:            Code Gen Options.
* symbol names, underscores:             Code Gen Options.
* SymLnk intrinsic <1>:                  SymLnk Intrinsic (function).
* SymLnk intrinsic:                      SymLnk Intrinsic (subroutine).
* synchronous write errors <1>:          Output Assumed To Flush.
* synchronous write errors:              Always Flush Output.
* syntax checking:                       Warning Options.
* System intrinsic <1>:                  System Intrinsic (function).
* System intrinsic:                      System Intrinsic (subroutine).
* System_Clock intrinsic:                System_Clock Intrinsic.
* tab character:                         Tabs.
* table of intrinsics:                   Table of Intrinsic Functions.
* Tan intrinsic:                         Tan Intrinsic.
* TanD intrinsic:                        TanD Intrinsic.
* TanH intrinsic:                        TanH Intrinsic.
* test programs:                         Nothing Happens.
* testing alignment:                     Aligned Data.
* textbooks:                             Language.
* threads:                               Support for Threads.
* Time intrinsic <1>:                    Time Intrinsic (VXT).
* Time intrinsic:                        Time Intrinsic (UNIX).
* Time8 intrinsic:                       Time8 Intrinsic.
* Tiny intrinsic:                        Tiny Intrinsic.
* Toolpack:                              Increasing Precision/Range.
* trailing comma:                        Ugly Null Arguments.
* trailing comment <1>:                  LEX.
* trailing comment <2>:                  Trailing Comment.
* trailing comment:                      Statements Comments Lines.
* trailing null byte:                    Character and Hollerith Constants.
* Transfer intrinsic:                    Transfer Intrinsic.
* transforming symbol names <1>:         Names.
* transforming symbol names:             Code Gen Options.
* translation of user programs:          What is GNU Fortran?.
* Transpose intrinsic:                   Transpose Intrinsic.
* Trim intrinsic:                        Trim Intrinsic.
* trips, number of:                      Loops.
* truncation, of floating-point values:  Floating-point Errors.
* truncation, of long lines:             Long Lines.
* TtyNam intrinsic <1>:                  TtyNam Intrinsic (function).
* TtyNam intrinsic:                      TtyNam Intrinsic (subroutine).
* TYPE statement:                        TYPE and ACCEPT I/O Statements.
* types, COMPLEX(KIND=1):                Compiler Types.
* types, COMPLEX(KIND=2):                Compiler Types.
* types, constants <1>:                  Compiler Constants.
* types, constants <2>:                  Constants.
* types, constants:                      Fortran Dialect Options.
* types, DOUBLE COMPLEX:                 Compiler Types.
* types, DOUBLE PRECISION:               Compiler Types.
* types, file:                           Overall Options.
* types, Fortran/C:                      C Access to Type Information.
* types, INTEGER(KIND=1):                Compiler Types.
* types, INTEGER(KIND=2):                Compiler Types.
* types, INTEGER(KIND=3):                Compiler Types.
* types, INTEGER(KIND=6):                Compiler Types.
* types, INTEGER*2:                      Popular Non-standard Types.
* types, INTEGER*8:                      Full Support for Compiler Types.
* types, LOGICAL(KIND=1):                Compiler Types.
* types, LOGICAL(KIND=2):                Compiler Types.
* types, LOGICAL(KIND=3):                Compiler Types.
* types, LOGICAL(KIND=6):                Compiler Types.
* types, LOGICAL*1:                      Popular Non-standard Types.
* types, of data:                        Compiler Types.
* types, REAL(KIND=1):                   Compiler Types.
* types, REAL(KIND=2):                   Compiler Types.
* types, REAL*16:                        Full Support for Compiler Types.
* UBound intrinsic:                      UBound Intrinsic.
* ugly features <1>:                     Distensions.
* ugly features:                         Shorthand Options.
* UMask intrinsic <1>:                   UMask Intrinsic (function).
* UMask intrinsic:                       UMask Intrinsic (subroutine).
* undefined behavior:                    Bug Criteria.
* undefined function value:              Bug Criteria.
* undefined reference (_bsearch):        Missing strtoul or bsearch.
* undefined reference (_main):           Cannot Link Fortran Programs.
* undefined reference (_strtoul):        Missing strtoul or bsearch.
* underscore <1>:                        Mangling of Names.
* underscore <2>:                        Underscores in Symbol Names.
* underscore <3>:                        Character Set.
* underscore:                            Code Gen Options.
* unformatted files:                     Portable Unformatted Files.
* uninitialized variables <1>:           Variables Assumed To Be Zero.
* uninitialized variables <2>:           Code Gen Options.
* uninitialized variables:               Warning Options.
* UNION statement:                       STRUCTURE UNION RECORD MAP.
* unit numbers <1>:                      Large File Unit Numbers.
* unit numbers:                          Larger File Unit Numbers.
* UNIX f77:                              Shorthand Options.
* UNIX intrinsics:                       Fortran Dialect Options.
* Unlink intrinsic <1>:                  Unlink Intrinsic (function).
* Unlink intrinsic:                      Unlink Intrinsic (subroutine).
* Unpack intrinsic:                      Unpack Intrinsic.
* unrecognized file format:              What is GNU Fortran?.
* unresolved reference (various):        Cannot Link Fortran Programs.
* unrolling loops:                       Optimize Options.
* UNSAVE:                                AUTOMATIC Statement.
* unsupported warnings:                  Warning Options.
* unused arguments <1>:                  Unused Arguments.
* unused arguments:                      Warning Options.
* unused dummies:                        Warning Options.
* unused parameters:                     Warning Options.
* unused variables:                      Warning Options.
* uppercase letters:                     Case Sensitivity.
* user-visible changes:                  Changes.
* variables, assumed to be zero:         Variables Assumed To Be Zero.
* variables, automatic:                  AUTOMATIC Statement.
* variables, initialization of:          Code Gen Options.
* variables, mistyped:                   Not My Type.
* variables, retaining values across calls: Variables Assumed To Be Saved.
* variables, uninitialized <1>:          Code Gen Options.
* variables, uninitialized:              Warning Options.
* variables, unused:                     Warning Options.
* Verify intrinsic:                      Verify Intrinsic.
* version information, printing <1>:     Overall Options.
* version information, printing:         What is GNU Fortran?.
* versions, recent <1>:                  Changes.
* versions, recent:                      News.
* VXT extensions <1>:                    VXT Fortran.
* VXT extensions:                        Fortran Dialect Options.
* VXT intrinsics:                        Fortran Dialect Options.
* vxtidate_y2kbuggy_0:                   Year 2000 (Y2K) Problems.
* warnings:                              What is GNU Fortran?.
* warnings vs errors:                    Warnings and Errors.
* warnings, all:                         Warning Options.
* warnings, extra:                       Warning Options.
* warnings, global names <1>:            Code Gen Options.
* warnings, global names:                Warning Options.
* warnings, implicit declaration:        Warning Options.
* warnings, suppressing:                 Warning Options.
* warnings, unsupported:                 Warning Options.
* wisdom:                                Collected Fortran Wisdom.
* wraparound:                            Run-time Environment Limits.
* wraparound, timings <1>:               Secnds Intrinsic.
* wraparound, timings <2>:               DTime Intrinsic (function).
* wraparound, timings <3>:               Time8 Intrinsic.
* wraparound, timings <4>:               Time Intrinsic (UNIX).
* wraparound, timings <5>:               System_Clock Intrinsic.
* wraparound, timings <6>:               Second Intrinsic (subroutine).
* wraparound, timings <7>:               Second Intrinsic (function).
* wraparound, timings <8>:               MClock8 Intrinsic.
* wraparound, timings <9>:               MClock Intrinsic.
* wraparound, timings <10>:              ETime Intrinsic (function).
* wraparound, timings <11>:              ETime Intrinsic (subroutine).
* wraparound, timings <12>:              DTime Intrinsic (subroutine).
* wraparound, timings:                   CPU_Time Intrinsic.
* wraparound, Y10K <1>:                  Time Intrinsic (VXT).
* wraparound, Y10K <2>:                  IDate Intrinsic (UNIX).
* wraparound, Y10K <3>:                  FDate Intrinsic (function).
* wraparound, Y10K <4>:                  FDate Intrinsic (subroutine).
* wraparound, Y10K:                      Date_and_Time Intrinsic.
* wraparound, Y2K:                       IDate Intrinsic (VXT).
* writes, flushing <1>:                  Output Assumed To Flush.
* writes, flushing:                      Always Flush Output.
* writing code:                          Collected Fortran Wisdom.
* x86 floating-point:                    Floating-point precision.
* x86 FPU stack:                         Inconsistent Calling Sequences.
* XOr intrinsic:                         XOr Intrinsic.
* Y10K compliance <1>:                   Time Intrinsic (VXT).
* Y10K compliance <2>:                   Year 10000 (Y10K) Problems.
* Y10K compliance <3>:                   IDate Intrinsic (UNIX).
* Y10K compliance <4>:                   FDate Intrinsic (function).
* Y10K compliance <5>:                   FDate Intrinsic (subroutine).
* Y10K compliance:                       Date_and_Time Intrinsic.
* Y2K compliance <1>:                    Y2KBAD.
* Y2K compliance <2>:                    IDate Intrinsic (VXT).
* Y2K compliance <3>:                    Date Intrinsic.
* Y2K compliance:                        Year 2000 (Y2K) Problems.
* y2kbuggy:                              Year 2000 (Y2K) Problems.
* Year 10000 compliance <1>:             Time Intrinsic (VXT).
* Year 10000 compliance <2>:             Year 10000 (Y10K) Problems.
* Year 10000 compliance <3>:             IDate Intrinsic (UNIX).
* Year 10000 compliance <4>:             FDate Intrinsic (function).
* Year 10000 compliance <5>:             FDate Intrinsic (subroutine).
* Year 10000 compliance:                 Date_and_Time Intrinsic.
* Year 2000 compliance <1>:              Y2KBAD.
* Year 2000 compliance <2>:              IDate Intrinsic (VXT).
* Year 2000 compliance <3>:              Date Intrinsic.
* Year 2000 compliance:                  Year 2000 (Y2K) Problems.
* Z edit descriptor <1>:                 Fortran 90 Features.
* Z edit descriptor:                     I/O.
* ZAbs intrinsic:                        ZAbs Intrinsic.
* ZCos intrinsic:                        ZCos Intrinsic.
* zero byte, trailing:                   Character and Hollerith Constants.
* zero-initialized variables:            Variables Assumed To Be Zero.
* zero-length CHARACTER:                 Character Type.
* zero-trip DO loops:                    Fortran Dialect Options.
* ZExp intrinsic:                        ZExp Intrinsic.
* ZExt intrinsic:                        ZExt Intrinsic.
* ZLog intrinsic:                        ZLog Intrinsic.
* ZSin intrinsic:                        ZSin Intrinsic.
* ZSqRt intrinsic:                       ZSqRt Intrinsic.



Tag Table:
Node: Top1740
Node: Copying3548
Node: Contributors22723
Node: Funding25936
Node: Funding GNU Fortran28438
Node: Look and Feel31153
Node: Getting Started31654
Node: What is GNU Fortran?33993
Node: G77 and GCC43880
Node: Invoking G7745077
Node: Option Summary47026
Node: Overall Options51767
Node: Shorthand Options58422
Node: Fortran Dialect Options60723
Node: Warning Options71984
Node: Debugging Options80873
Node: Optimize Options81949
Ref: Optimize Options-Footnote-187199
Node: Preprocessor Options87892
Node: Directory Options89076
Node: Code Gen Options90391
Node: Environment Variables108125
Node: News108588
Node: Changes155538
Node: Language176604
Node: Direction of Language Development178808
Node: Standard Support185052
Node: No Passing External Assumed-length185778
Node: No Passing Dummy Assumed-length186264
Node: No Pathological Implied-DO186788
Node: No Useless Implied-DO187484
Node: Conformance188224
Node: Notation Used190252
Node: Terms and Concepts194463
Node: Syntactic Items194980
Node: Statements Comments Lines195671
Node: Scope of Names and Labels197545
Node: Characters Lines Sequence197984
Node: Character Set198595
Node: Lines199605
Node: Continuation Line202090
Node: Statements203054
Node: Statement Labels204019
Node: Order204720
Node: INCLUDE205614
Node: Cpp-style directives208395
Node: Data Types and Constants208859
Node: Types212385
Node: Double Notation213483
Node: Star Notation214568
Node: Kind Notation217526
Node: Constants225959
Node: Integer Type227484
Node: Character Type228091
Node: Expressions228864
Node: %LOC()229285
Node: Specification Statements232024
Node: NAMELIST232486
Node: DOUBLE COMPLEX233246
Node: Control Statements233509
Node: DO WHILE234008
Node: END DO234324
Node: Construct Names235342
Node: CYCLE and EXIT236093
Node: Functions and Subroutines238868
Node: %VAL()239521
Node: %REF()240896
Node: %DESCR()242735
Node: Generics and Specifics244879
Node: REAL() and AIMAG() of Complex252092
Node: CMPLX() of DOUBLE PRECISION253936
Node: MIL-STD 1753255673
Node: f77/f2c Intrinsics256026
Node: Table of Intrinsic Functions256607
Node: Abort Intrinsic273330
Node: Abs Intrinsic273609
Node: Access Intrinsic274492
Node: AChar Intrinsic275343
Node: ACos Intrinsic275880
Node: AdjustL Intrinsic276356
Node: AdjustR Intrinsic276696
Node: AImag Intrinsic277037
Node: AInt Intrinsic277857
Node: Alarm Intrinsic278500
Node: All Intrinsic279349
Node: Allocated Intrinsic279678
Node: ALog Intrinsic280024
Node: ALog10 Intrinsic280431
Node: AMax0 Intrinsic280846
Node: AMax1 Intrinsic281348
Node: AMin0 Intrinsic281818
Node: AMin1 Intrinsic282319
Node: AMod Intrinsic282788
Node: And Intrinsic283231
Node: ANInt Intrinsic283754
Node: Any Intrinsic284535
Node: ASin Intrinsic284859
Node: Associated Intrinsic285334
Node: ATan Intrinsic285685
Node: ATan2 Intrinsic286168
Node: BesJ0 Intrinsic286736
Node: BesJ1 Intrinsic287214
Node: BesJN Intrinsic287692
Node: BesY0 Intrinsic288208
Node: BesY1 Intrinsic288687
Node: BesYN Intrinsic289166
Node: Bit_Size Intrinsic289686
Node: BTest Intrinsic290362
Node: CAbs Intrinsic291099
Node: CCos Intrinsic291503
Node: Ceiling Intrinsic291912
Node: CExp Intrinsic292251
Node: Char Intrinsic292660
Node: ChDir Intrinsic (subroutine)293931
Node: ChMod Intrinsic (subroutine)294952
Node: CLog Intrinsic296240
Node: Cmplx Intrinsic296661
Node: Complex Intrinsic297479
Node: Conjg Intrinsic298942
Node: Cos Intrinsic299383
Node: CosH Intrinsic299863
Node: Count Intrinsic300255
Node: CPU_Time Intrinsic300590
Node: CShift Intrinsic301398
Node: CSin Intrinsic301737
Node: CSqRt Intrinsic302146
Node: CTime Intrinsic (subroutine)302573
Node: CTime Intrinsic (function)303345
Node: DAbs Intrinsic303996
Node: DACos Intrinsic304409
Node: DASin Intrinsic304817
Node: DATan Intrinsic305226
Node: DATan2 Intrinsic305636
Node: Date_and_Time Intrinsic306108
Node: DbesJ0 Intrinsic307489
Node: DbesJ1 Intrinsic307899
Node: DbesJN Intrinsic308302
Node: DbesY0 Intrinsic308743
Node: DbesY1 Intrinsic309146
Node: DbesYN Intrinsic309549
Node: Dble Intrinsic309988
Node: DCos Intrinsic310711
Node: DCosH Intrinsic311112
Node: DDiM Intrinsic311519
Node: DErF Intrinsic311968
Node: DErFC Intrinsic312354
Node: DExp Intrinsic312746
Node: Digits Intrinsic313149
Node: DiM Intrinsic313483
Node: DInt Intrinsic313999
Node: DLog Intrinsic314400
Node: DLog10 Intrinsic314802
Node: DMax1 Intrinsic315217
Node: DMin1 Intrinsic315688
Node: DMod Intrinsic316157
Node: DNInt Intrinsic316602
Node: Dot_Product Intrinsic317018
Node: DProd Intrinsic317375
Node: DSign Intrinsic317774
Node: DSin Intrinsic318230
Node: DSinH Intrinsic318632
Node: DSqRt Intrinsic319040
Node: DTan Intrinsic319448
Node: DTanH Intrinsic319850
Node: DTime Intrinsic (subroutine)320271
Node: EOShift Intrinsic321559
Node: Epsilon Intrinsic321915
Node: ErF Intrinsic322256
Node: ErFC Intrinsic322679
Node: ETime Intrinsic (subroutine)323256
Node: ETime Intrinsic (function)324436
Node: Exit Intrinsic325493
Node: Exp Intrinsic325987
Node: Exponent Intrinsic326466
Node: FDate Intrinsic (subroutine)326824
Node: FDate Intrinsic (function)327753
Node: FGet Intrinsic (subroutine)328544
Node: FGetC Intrinsic (subroutine)329400
Node: Float Intrinsic330296
Node: Floor Intrinsic330715
Node: Flush Intrinsic331050
Node: FNum Intrinsic331648
Node: FPut Intrinsic (subroutine)332115
Node: FPutC Intrinsic (subroutine)332931
Node: Fraction Intrinsic333797
Node: FSeek Intrinsic334157
Node: FStat Intrinsic (subroutine)334901
Node: FStat Intrinsic (function)336445
Node: FTell Intrinsic (subroutine)337754
Node: FTell Intrinsic (function)338446
Node: GError Intrinsic338982
Node: GetArg Intrinsic339375
Node: GetCWD Intrinsic (subroutine)340030
Node: GetCWD Intrinsic (function)340905
Node: GetEnv Intrinsic341544
Node: GetGId Intrinsic342150
Node: GetLog Intrinsic342475
Node: GetPId Intrinsic343032
Node: GetUId Intrinsic343359
Node: GMTime Intrinsic343683
Node: HostNm Intrinsic (subroutine)344710
Node: HostNm Intrinsic (function)345819
Node: Huge Intrinsic346681
Node: IAbs Intrinsic347023
Node: IAChar Intrinsic347433
Node: IAnd Intrinsic347992
Node: IArgC Intrinsic348499
Node: IBClr Intrinsic348894
Node: IBits Intrinsic349424
Node: IBSet Intrinsic350157
Node: IChar Intrinsic350678
Node: IDate Intrinsic (UNIX)351916
Node: IDiM Intrinsic352738
Node: IDInt Intrinsic353206
Node: IDNInt Intrinsic353618
Node: IEOr Intrinsic354036
Node: IErrNo Intrinsic354553
Node: IFix Intrinsic354899
Node: Imag Intrinsic355306
Node: ImagPart Intrinsic356330
Node: Index Intrinsic357375
Node: Int Intrinsic357947
Node: Int2 Intrinsic358681
Node: Int8 Intrinsic359410
Node: IOr Intrinsic360139
Node: IRand Intrinsic360638
Node: IsaTty Intrinsic361577
Node: IShft Intrinsic362020
Node: IShftC Intrinsic362869
Node: ISign Intrinsic363817
Node: ITime Intrinsic364286
Node: Kill Intrinsic (subroutine)364707
Node: Kind Intrinsic365563
Node: LBound Intrinsic365907
Node: Len Intrinsic366243
Node: Len_Trim Intrinsic366898
Node: LGe Intrinsic367329
Node: LGt Intrinsic368761
Node: Link Intrinsic (subroutine)369685
Node: LLe Intrinsic370669
Node: LLt Intrinsic371593
Node: LnBlnk Intrinsic372506
Node: Loc Intrinsic372928
Node: Log Intrinsic373378
Node: Log10 Intrinsic373988
Node: Logical Intrinsic374549
Node: Long Intrinsic374891
Node: LShift Intrinsic375434
Node: LStat Intrinsic (subroutine)376489
Node: LStat Intrinsic (function)378320
Node: LTime Intrinsic379902
Node: MatMul Intrinsic380925
Node: Max Intrinsic381262
Node: Max0 Intrinsic381832
Node: Max1 Intrinsic382302
Node: MaxExponent Intrinsic382805
Node: MaxLoc Intrinsic383164
Node: MaxVal Intrinsic383510
Node: MClock Intrinsic383851
Node: MClock8 Intrinsic384768
Node: Merge Intrinsic385975
Node: Min Intrinsic386310
Node: Min0 Intrinsic386880
Node: Min1 Intrinsic387350
Node: MinExponent Intrinsic387853
Node: MinLoc Intrinsic388212
Node: MinVal Intrinsic388558
Node: Mod Intrinsic388896
Node: Modulo Intrinsic389438
Node: MvBits Intrinsic389776
Node: Nearest Intrinsic390661
Node: NInt Intrinsic391004
Node: Not Intrinsic391861
Node: Or Intrinsic392275
Node: Pack Intrinsic392792
Node: PError Intrinsic393121
Node: Precision Intrinsic393594
Node: Present Intrinsic393948
Node: Product Intrinsic394297
Node: Radix Intrinsic394642
Node: Rand Intrinsic394978
Node: Random_Number Intrinsic395884
Node: Random_Seed Intrinsic396256
Node: Range Intrinsic396623
Node: Real Intrinsic396963
Node: RealPart Intrinsic397988
Node: Rename Intrinsic (subroutine)399040
Node: Repeat Intrinsic400031
Node: Reshape Intrinsic400386
Node: RRSpacing Intrinsic400734
Node: RShift Intrinsic401088
Node: Scale Intrinsic402105
Node: Scan Intrinsic402440
Node: Second Intrinsic (function)402783
Node: Second Intrinsic (subroutine)403633
Node: Selected_Int_Kind Intrinsic404627
Node: Selected_Real_Kind Intrinsic405037
Node: Set_Exponent Intrinsic405443
Node: Shape Intrinsic405819
Node: Short Intrinsic406161
Node: Sign Intrinsic406876
Node: Signal Intrinsic (subroutine)407495
Node: Sin Intrinsic409728
Node: SinH Intrinsic410222
Node: Sleep Intrinsic410614
Node: Sngl Intrinsic410975
Node: Spacing Intrinsic411383
Node: Spread Intrinsic411726
Node: SqRt Intrinsic412066
Node: SRand Intrinsic412689
Node: Stat Intrinsic (subroutine)413085
Node: Stat Intrinsic (function)414719
Node: Sum Intrinsic416102
Node: SymLnk Intrinsic (subroutine)416453
Node: System Intrinsic (subroutine)417504
Node: System_Clock Intrinsic418462
Node: Tan Intrinsic419605
Node: TanH Intrinsic420084
Node: Time Intrinsic (UNIX)420485
Node: Time8 Intrinsic421489
Node: Tiny Intrinsic422687
Node: Transfer Intrinsic423021
Node: Transpose Intrinsic423371
Node: Trim Intrinsic423724
Node: TtyNam Intrinsic (subroutine)424073
Node: TtyNam Intrinsic (function)424794
Node: UBound Intrinsic425382
Node: UMask Intrinsic (subroutine)425746
Node: Unlink Intrinsic (subroutine)426462
Node: Unpack Intrinsic427379
Node: Verify Intrinsic427733
Node: XOr Intrinsic428071
Node: ZAbs Intrinsic428606
Node: ZCos Intrinsic428994
Node: ZExp Intrinsic429386
Node: ZLog Intrinsic429778
Node: ZSin Intrinsic430170
Node: ZSqRt Intrinsic430563
Node: Scope and Classes of Names430939
Node: Underscores in Symbol Names431428
Node: I/O431686
Node: Fortran 90 Features432466
Node: Other Dialects435275
Node: Source Form436435
Node: Carriage Returns437791
Node: Tabs438129
Node: Short Lines439847
Node: Long Lines440830
Node: Ampersands441450
Node: Trailing Comment441713
Node: Debug Line442494
Node: Dollar Signs443168
Node: Case Sensitivity443459
Node: VXT Fortran452080
Node: Double Quote Meaning453268
Node: Exclamation Point454205
Node: Fortran 90455257
Node: Pedantic Compilation456314
Node: Distensions460283
Node: Ugly Implicit Argument Conversion461252
Node: Ugly Assumed-Size Arrays461875
Node: Ugly Complex Part Extraction463605
Node: Ugly Null Arguments465236
Node: Ugly Conversion of Initializers466848
Node: Ugly Integer Conversions468622
Node: Ugly Assigned Labels469739
Node: Compiler471679
Node: Compiler Limits472318
Node: Run-time Environment Limits473214
Node: Timer Wraparounds475161
Node: Year 2000 (Y2K) Problems476449
Node: Array Size480964
Node: Character-variable Length482158
Node: Year 10000 (Y10K) Problems482676
Node: Compiler Types483231
Node: Compiler Constants487947
Node: Compiler Intrinsics488811
Node: Intrinsic Groups489743
Node: Other Intrinsics493193
Node: ACosD Intrinsic500800
Node: AIMax0 Intrinsic501094
Node: AIMin0 Intrinsic501416
Node: AJMax0 Intrinsic501739
Node: AJMin0 Intrinsic502062
Node: ASinD Intrinsic502384
Node: ATan2D Intrinsic502703
Node: ATanD Intrinsic503024
Node: BITest Intrinsic503343
Node: BJTest Intrinsic503665
Node: CDAbs Intrinsic503989
Node: CDCos Intrinsic504377
Node: CDExp Intrinsic504767
Node: CDLog Intrinsic505157
Node: CDSin Intrinsic505547
Node: CDSqRt Intrinsic505938
Node: ChDir Intrinsic (function)506346
Node: ChMod Intrinsic (function)507190
Node: CosD Intrinsic508319
Node: DACosD Intrinsic508646
Node: DASinD Intrinsic508969
Node: DATan2D Intrinsic509295
Node: DATanD Intrinsic509624
Node: Date Intrinsic509948
Node: DbleQ Intrinsic510682
Node: DCmplx Intrinsic511001
Node: DConjg Intrinsic512647
Node: DCosD Intrinsic513047
Node: DFloat Intrinsic513368
Node: DFlotI Intrinsic513755
Node: DFlotJ Intrinsic514080
Node: DImag Intrinsic514404
Node: DReal Intrinsic514796
Node: DSinD Intrinsic515958
Node: DTanD Intrinsic516277
Node: DTime Intrinsic (function)516607
Node: FGet Intrinsic (function)517852
Node: FGetC Intrinsic (function)518640
Node: FloatI Intrinsic519471
Node: FloatJ Intrinsic519806
Node: FPut Intrinsic (function)520140
Node: FPutC Intrinsic (function)520891
Node: IDate Intrinsic (VXT)521699
Node: IIAbs Intrinsic522758
Node: IIAnd Intrinsic523083
Node: IIBClr Intrinsic523403
Node: IIBits Intrinsic523727
Node: IIBSet Intrinsic524052
Node: IIDiM Intrinsic524376
Node: IIDInt Intrinsic524697
Node: IIDNnt Intrinsic525021
Node: IIEOr Intrinsic525345
Node: IIFix Intrinsic525665
Node: IInt Intrinsic525983
Node: IIOr Intrinsic526297
Node: IIQint Intrinsic526612
Node: IIQNnt Intrinsic526935
Node: IIShftC Intrinsic527261
Node: IISign Intrinsic527590
Node: IMax0 Intrinsic527915
Node: IMax1 Intrinsic528235
Node: IMin0 Intrinsic528554
Node: IMin1 Intrinsic528873
Node: IMod Intrinsic529191
Node: INInt Intrinsic529506
Node: INot Intrinsic529823
Node: IZExt Intrinsic530138
Node: JIAbs Intrinsic530456
Node: JIAnd Intrinsic530775
Node: JIBClr Intrinsic531095
Node: JIBits Intrinsic531419
Node: JIBSet Intrinsic531744
Node: JIDiM Intrinsic532068
Node: JIDInt Intrinsic532389
Node: JIDNnt Intrinsic532713
Node: JIEOr Intrinsic533037
Node: JIFix Intrinsic533357
Node: JInt Intrinsic533675
Node: JIOr Intrinsic533989
Node: JIQint Intrinsic534304
Node: JIQNnt Intrinsic534627
Node: JIShft Intrinsic534952
Node: JIShftC Intrinsic535278
Node: JISign Intrinsic535607
Node: JMax0 Intrinsic535932
Node: JMax1 Intrinsic536252
Node: JMin0 Intrinsic536571
Node: JMin1 Intrinsic536890
Node: JMod Intrinsic537208
Node: JNInt Intrinsic537523
Node: JNot Intrinsic537840
Node: JZExt Intrinsic538155
Node: Kill Intrinsic (function)538483
Node: Link Intrinsic (function)539180
Node: QAbs Intrinsic540007
Node: QACos Intrinsic540332
Node: QACosD Intrinsic540651
Node: QASin Intrinsic540974
Node: QASinD Intrinsic541295
Node: QATan Intrinsic541618
Node: QATan2 Intrinsic541941
Node: QATan2D Intrinsic542268
Node: QATanD Intrinsic542599
Node: QCos Intrinsic542925
Node: QCosD Intrinsic543243
Node: QCosH Intrinsic543563
Node: QDiM Intrinsic543883
Node: QExp Intrinsic544199
Node: QExt Intrinsic544514
Node: QExtD Intrinsic544830
Node: QFloat Intrinsic545151
Node: QInt Intrinsic545475
Node: QLog Intrinsic545792
Node: QLog10 Intrinsic546109
Node: QMax1 Intrinsic546433
Node: QMin1 Intrinsic546755
Node: QMod Intrinsic547075
Node: QNInt Intrinsic547392
Node: QSin Intrinsic547711
Node: QSinD Intrinsic548028
Node: QSinH Intrinsic548348
Node: QSqRt Intrinsic548669
Node: QTan Intrinsic548989
Node: QTanD Intrinsic549306
Node: QTanH Intrinsic549626
Node: Rename Intrinsic (function)549959
Node: Secnds Intrinsic550781
Node: Signal Intrinsic (function)551397
Node: SinD Intrinsic554243
Node: SnglQ Intrinsic554572
Node: SymLnk Intrinsic (function)554904
Node: System Intrinsic (function)555789
Node: TanD Intrinsic557133
Node: Time Intrinsic (VXT)557467
Node: UMask Intrinsic (function)558238
Node: Unlink Intrinsic (function)558863
Node: ZExt Intrinsic559609
Node: Other Compilers559914
Node: Dropping f2c Compatibility562435
Node: Compilers Other Than f2c565512
Node: Other Languages567315
Node: Interoperating with C and C++567568
Node: C Interfacing Tools568606
Node: C Access to Type Information569543
Node: f2c Skeletons and Prototypes570239
Ref: f2c Skeletons and Prototypes-Footnote-1571695
Node: C++ Considerations571949
Node: Startup Code572613
Node: Installation577413
Node: Prerequisites578310
Node: Problems Installing578548
Node: General Problems579248
Node: GNU C Required579829
Node: Patching GNU CC580535
Node: Building GNU CC Necessary580897
Node: Missing strtoul or bsearch581257
Node: Cleanup Kills Stage Directories581545
Node: LANGUAGES Macro Ignored582236
Node: System-specific Problems583105
Node: Cross-compiler Problems583470
Node: Settings585779
Node: Larger File Unit Numbers586867
Node: Always Flush Output588461
Node: Maximum Stackable Size590142
Node: Floating-point Bit Patterns591012
Node: Large Initialization591776
Node: Alpha Problems Fixed593379
Node: Quick Start594275
Node: Complete Installation594526
Node: Distributing Binaries594810
Node: Debugging and Interfacing595074
Node: Main Program Unit597759
Node: Procedures600259
Node: Functions602923
Node: Names604546
Node: Common Blocks607694
Node: Local Equivalence Areas609736
Node: Complex Variables612428
Node: Arrays613553
Node: Adjustable Arrays616892
Node: Alternate Entry Points619756
Node: Alternate Returns626465
Node: Assigned Statement Labels627373
Node: Run-time Library Errors629225
Node: Collected Fortran Wisdom631184
Node: Advantages Over f2c632621
Node: Language Extensions633607
Node: Diagnostic Abilities634790
Node: Compiler Options635190
Node: Compiler Speed636247
Node: Program Speed636966
Node: Ease of Debugging638560
Node: Character and Hollerith Constants640999
Node: Block Data and Libraries641980
Node: Loops645314
Node: Working Programs650545
Node: Not My Type651294
Node: Variables Assumed To Be Zero653234
Node: Variables Assumed To Be Saved654297
Node: Unwanted Variables655676
Node: Unused Arguments656565
Node: Surprising Interpretations of Code657037
Node: Aliasing Assumed To Work657893
Node: Output Assumed To Flush664230
Node: Large File Unit Numbers665691
Node: Floating-point precision666980
Node: Inconsistent Calling Sequences668206
Node: Overly Convenient Options669197
Node: Faster Programs672508
Node: Aligned Data672959
Node: Prefer Automatic Uninitialized Variables677845
Node: Avoid f2c Compatibility679220
Node: Use Submodel Options679697
Node: Trouble680710
Node: But-bugs682322
Node: Signal 11 and Friends684100
Node: Cannot Link Fortran Programs686189
Node: Large Common Blocks687481
Node: Debugger Problems687916
Node: NeXTStep Problems688640
Node: Stack Overflow690476
Node: Nothing Happens692498
Node: Strange Behavior at Run Time694121
Node: Floating-point Errors696619
Node: Known Bugs702922
Node: Missing Features710055
Node: Better Source Model711987
Node: Fortran 90 Support713765
Node: Intrinsics in PARAMETER Statements714875
Node: Arbitrary Concatenation715764
Node: SELECT CASE on CHARACTER Type716176
Node: RECURSIVE Keyword716472
Node: Increasing Precision/Range716908
Node: Popular Non-standard Types718455
Node: Full Support for Compiler Types718881
Node: Array Bounds Expressions719562
Node: POINTER Statements720020
Node: Sensible Non-standard Constructs720914
Node: READONLY Keyword723251
Node: FLUSH Statement724172
Node: Expressions in FORMAT Statements724553
Node: Explicit Assembler Code725739
Node: Q Edit Descriptor726039
Node: Old-style PARAMETER Statements726554
Node: TYPE and ACCEPT I/O Statements727299
Node: STRUCTURE UNION RECORD MAP727876
Node: OPEN CLOSE and INQUIRE Keywords728373
Node: ENCODE and DECODE729364
Node: AUTOMATIC Statement730470
Node: Suppressing Space Padding731728
Node: Fortran Preprocessor732966
Node: Bit Operations on Floating-point Data733550
Node: Really Ugly Character Assignments734094
Node: POSIX Standard734480
Node: Floating-point Exception Handling734731
Node: Nonportable Conversions736069
Node: Large Automatic Arrays736623
Node: Support for Threads737041
Node: Enabling Debug Lines737477
Node: Better Warnings737865
Node: Gracefully Handle Sensible Bad Code739580
Node: Non-standard Conversions740335
Node: Non-standard Intrinsics740689
Node: Modifying DO Variable741116
Node: Better Pedantic Compilation741803
Node: Warn About Implicit Conversions742442
Node: Invalid Use of Hollerith Constant743040
Node: Dummy Array Without Dimensioning Dummy743594
Node: Invalid FORMAT Specifiers744518
Node: Ambiguous Dialects744930
Node: Unused Labels745352
Node: Informational Messages745585
Node: Uninitialized Variables at Run Time745999
Node: Portable Unformatted Files746616
Ref: Portable Unformatted Files-Footnote-1749583
Node: Better List-directed I/O749611
Node: Default to Console I/O750527
Node: Labels Visible to Debugger751186
Node: Disappointments751598
Node: Mangling of Names752241
Node: Multiple Definitions of External Names753100
Node: Limitation on Implicit Declarations754472
Node: Non-bugs754765
Node: Backslash in Constants755895
Node: Initializing Before Specifying760793
Node: Context-Sensitive Intrinsicness761944
Node: Context-Sensitive Constants763849
Node: Equivalence Versus Equality766814
Node: Order of Side Effects769866
Node: Warnings and Errors771603
Node: Open Questions773292
Node: Bugs773762
Node: Bug Criteria775268
Node: Bug Lists781506
Node: Bug Reporting782300
Node: Sending Patches795929
Node: Service801435
Node: Diagnostics801894
Node: CMPAMBIG803283
Node: EXPIMP809705
Node: INTGLOB810946
Node: LEX813195
Node: GLOBALS818641
Node: LINKFAIL821310
Node: Y2KBAD822426
Node: Index822781

End Tag Table
